What is the colour of a shirt which has blue and white stripes when put under yellow light? Explain.​

Answer:

H + H ------> He + energy. He + He -----> H + H + He.

Explanation:

Hydrogen having one proton and no neutron fuse with hydrogen having one proton and one neutron forming helium atom with the release of photon. After that two helium atoms combine together forming two hydrogen atoms having one proton each whereas one helium atom having two protons and two neutrons present in their nucleus so the end product of this reaction is hydrogen atoms and helium.

The temperature of a gas molecule is measured by the average translational kinetic energy

Answer:

The temperature of a gas is a measure of the average translational kinetic energy of the molecules. In a hot gas, the molecules move faster than in a cold gas; the mass remains the same, but the kinetic energy, and hence the temperature, is greater because of the increased velocity of the molecules

Explanation:

This is also from Go0gle because my explanation would've been an essay long .

but in shorter version if the gas molecules move fast it's hot an if it moves slow its cold hope this helps .

Answer:

a plumber

Explanation:

Answer:

The rate of change of distance is called speed it can also be defined as distance travelled per unit time,from these definition you can tell that the formula will be

speed=distance/time

in this question the distance is 900meters and the time is 55seconds therefore the speed will be:

s=900meters/55seconds

=16.36m/s

I hope this helps

Answer:

250N

Explanation:

According to newton second law,

\sumF = ma

Fm - Ff = ma

Since the velocity is constant, a = 0m/s

Frictional force Ff = 250N

Substitute

Fm - 250 = m(0)

Fm - 250 = 0

Fm = 250N

Hence the force to keep the box sliding at constant speed is 250N

Explanation:

st system:the internationak system of measurement which i declared form internationäl convention of scientists held in france in 1960AD is Si system

CGS System:it measure in length in centimeter mass in gram time in second

Total distance = 10 km + 10 km = 20 km

1 km = 1000 m

20km x 1000 = 20,000 m

Total time = 20 min. + 30 min. = 50 minutes

Average speed = Distance /  time

Average speed = 20,000/50 min

Average speed = 400 m/s

Vtb xe máy là:

v=s : t= 500 : 25=20(m/s)

The distance, to the nearest tenth, is 314.9 light-years.

The given data is:

A recently discovered planet is located 1.85*10^5 miles from Earth.

Now we want to transform this distance to light-years.

Remember that a light-year is defined as "the distance that the light would travel in one year".

using the relation:

distance = speed*time

The speed of light is:

speed = 6.706*10^8 mi/h

And in one year has 8760 hours, then we have:

time = 8760 h

replacing these in the equation we get:

distance = speed*time

distance = (6.706*10^8 mi/h)*(8760 h)  = 5,874,456,000,000 miles

Son one light-year is equivalent to 5,874,456,000,000 miles

1 light-year = 5,874,456,000,000 miles

So to transform a distance in miles to light-years, we just need to divide that distance by 5,874,456,000,000 miles:

The distance between the new planet and Earth was:

D = 1.85*10^15 mi = ( 1.85*10^15)/(5,874,456,000,000) = 314.9 light-years.

if you want to learn more about this, you can read:

https://brainly.com/question/1302132

Explanation:

FALSE

The first periodic table of elements Mendeleev created contained 63 elements.

Answer:

Distancia, D = 170,000 metros

Explanation:

Dados los siguientes datos;

Para encontrar la distancia recorrida, en metros;

Matemáticamente, la distancia recorrida por un objeto se calcula mediante la fórmula;

Distancia = velocidad * tiempo

Sustituyendo los valores en la fórmula, tenemos;

Distancia = 85 * 2

Distancia = 170 kilómetros

A continuación, convertiríamos el valor en kilómetros a metros;

Conversión:

1 kilómetros = 1000 metros

170 kilómetros = D metros

Multiplicación cruzada, tenemos;

D = 170 * 1000

D = 170,000 metros

Por lo tanto, habría viajado 170,000 metros después de 2 horas.

Answer:

asdiieiwihebebwiwo3o2iwjw3

Answer:

[tex]{ \bf{false}}[/tex]

Explanation:

Because it breaks the law of moments.

Answer:

I. Vs = 8.0 Volts.

II. Is = 4.5 Amperes.

Explanation:

Given the following data;

Np = 1.5Ns = [tex] \frac {N_{P}}{N_{S}} = 1.5 [/tex]  ..... equation 1

Ip = 3.0 A

Vp = 12 V

To find the voltage and current on the secondary coil;

I. For the voltage in the secondary coil (Vs), we would use the following formula;

[tex] \frac {V_{P}}{V_{S}} = \frac {N_{P}}{N_{S}} [/tex]  ...... equation 2.

Substituting eqn 1 into eqn 2, we have;

[tex] \frac {V_{P}}{V_{S}} = 1.5 [/tex]

[tex] \frac {12}{V_{S}} = 1.5 [/tex]

Cross-multiplying, we have;

[tex] V_{S} * 1.5 = 12 [/tex]

[tex] V_{S} = \frac {12}{1.5} [/tex]

Vs = 8.0 V

II. For the current in the secondary coil (Is), we would use the following formula;

[tex] \frac {I_{S}}{I_{P}} = \frac {N_{P}}{N_{S}} [/tex]  .... equation 3

Substituting eqn 1 into eqn 3, we have;

[tex] \frac {I_{S}}{I_{P}} = 1.5 [/tex]

[tex] \frac {I_{S}}{3.0} = 1.5 [/tex]

Cross-multiplying, we have;

[tex] I_{S} = 1.5 * 3.0 [/tex]

Is = 4.5 A

Answer:

203360Pa

Explanation:

Pressure= density of liquid*height*g

=1000*10*10

=100000Pa

Total pressure= water pressure + atmospheric pressure

=1000000+103360

=203360 Pascal

Answer:

[tex] \green{ \sf \: \: 1.6 \: m {s}^{ - 2} \: \: \: is \: the \: correct \: answer}[/tex]

Explanation:

[tex] \sf \: \huge{g } _{ \small{moon}} = \frac{ {\huge{g}}_{earth}}{6} \\ \\ \sf \implies \: \sf \: \huge{g } _{ \small{moon}} = \frac{ 9.8}{6} = 1.6 \: \: m {s}^{ - 2} [/tex]

Explanation:

Coal is a fossil fuel and is the altered remains of prehistoric vegetation. The energy we get from coal today comes from the energy that plants absorbed from the sun millions of years ago. In the burning process of coal, carbon dioxide (CO2) is emitted. Humans expel CO2, and plants utilize it every single day. Carbon is a building block for all forms of life and is used in a lot of everyday products.

Coal is a combustible black or brownish-black sedimentary rock, formed as rock strata called coal seams. Coal is mostly carbon with variable amounts of other elements, chiefly hydrogen, sulfur, oxygen, and nitrogen.Coal is formed when dead plant matter decays into peat and is converted into coal by the heat and pressure of deep burial over millions of years. Vast deposits of coal originate in former wetlands—called coal forests—that covered much of the Earth's tropical land areas during the late Carboniferous (Pennsylvanian) and Permian times. However, many significant coal deposits are younger than this and originate from the Mesozoic and Cenozoic eras.

Answer:

look it up of goog le

Explanation:

Answer:

301.6 N

Explanation:

The length of the wire L₀ = 8 m and its diameter, d = 4 mm = 4 × 10⁻³ m. Since its temperature drops by  10°C, it will have a change in length ΔL = L₀αΔθ where α = linear expansivity of steel, a 12 × 10⁻⁶ /K, and Δθ = temperature change = -10°C = -10 K(negative since it is a drop)

So, the strain, ε = ΔL/L₀ = αΔθ = 12 × 10⁻⁶ /K × 10 K = 12 × 10⁻⁵

Now the Young's modulus of steel, Y = σ/ε where σ = stress = T/A where T = increase in tension in steel wire and A = cross-sectional area of wire = πd²/4 where d = diameter of wire = 4 × 10⁻³ m and ε = strain = 12 × 10⁻⁵

So, σ = Yε

Since Y = 2 × 10¹¹ N/m².

Substituting the values of the variables into the equation, we have

σ = Yε

σ = 2 × 10¹¹ N/m² × 12 × 10⁻⁵

σ = 24 × 10⁶ N/m²

Since σ = T/A

T = σA

T = σπd²/4

Substituting the values of the variables into the equation, we have

T = σπd²/4

T = 24 × 10⁶ N/m² × π × (4 × 10⁻³ m)²/4

T = 24 × 10⁶ N/m² × π × 16 × 10⁻⁶ m²/4

T = 24 × 10⁶ N/m² × π × 4 × 10⁻⁶ m²

T = 96 N × π

T = 301.59 N

T ≅ 301.6 N

So, the increase in tension in the steel wire is 301.6 N

Answer:

Mark brainliest please

answer is 5.5 degrees

Explanation:

Given,

Speed of car (v) = 50km/hr = 50×1000/60×60 m/s

Radius of circle (r) = 200m

Banking angle (θ) =?

we know ,

tanθ = v^2/rg

or , tanθ = (50×1000/60×60)^2/200×10 = 0.0965

∴ θ = tan-1(0.0965) = 5.5°

Answer:

The postulates of the Kinetic Molecular Theory, KMT, are;

(1) In an ideal gas the molecules are in constant motion

(2) The collisions between molecules of gases are perfectly elastic

(3) The volume occupied by the molecules are negligible

(4) The temperature of the gas is directly proportional to its kinetic energy

(5) The intermolecular forces in the gas are negligible

According to the KMT, gaseous water vapor molecules are in constant motion and move at a speed that depends on their temperature. The intermolecular forces between the molecules are negligible and when they collide with the cold glass, they lose temperature to the glass, thereby reducing their temperature, kinetic energy and therefore, their speed is reduced.

The increasingly temperature of the water vapor coming in contact with the cold glass gives rise to reduced speed of the cooled gas molecules, thereby causing them to move closer together after having elastic collisions and to cluster with tiny particles in the air, to form tiny droplets

The rapid cooling on the cold glass surface causes the droplets to form rapidly on the cold glass surface which makes them visible as condensed water on the surface of the cold glass of water

Explanation:

Answer:

he will be in profit

Explanation:

Himalayan region are high above the sea level so the gravity will be less there compared to the Terai region

Terai lies way below he Himalayan region so the pull of gravity will be more compared to Himalayan region

that's why he will be in profit but not loss

Answer:

A = 150 cm at 120 degc

Where A + B = C       find B

B = C - A          add -A to both sides

Ax = 150 cos 60 = -75

Ay = 150 sin 60 = 129.9

Likewise

Cx = 114.7

Cy = 80.3

Bx = Cx - Ax = 114.7 + 75 = 189.7

By = Cy - Ay = 80.3 -129.9 = -49.6

B = (189.7^2 + 49.6^2)^1/2 = 196.7       length of B vector

tan B = By / Bx = -49.6 / 189.7       B = -14.65 deg

Also

sin B = By / B = -49.6 / 196.1 = -14.65 deg

So B is 196.1 cm at -14.65 deg

Answer:

Explanation:

The only one that doesn't have a time unit that is squared is the one that is a label for speed or velocity. Acceleration has a label with the time unit squared, like m/s/s. Choice D is the only unit for speed/velocity.

Answer: D

Explanation: metres per second (m/s)

Answer:

4 d

Explanation:

because the spring is balanced with t

Answer:

24J

Explanation:

The energy output will be the 20% it lost in efficiency:

120-80% = 24J

Answer:

Given information:-

[tex]\clubsuit[/tex]The displacement of the cyclist will be shortest distance from his initial to final positions which is nothing but diameter of the circle = 2r

We know that,

[tex] \underline{ \boxed{ \sf{Speed = \frac{Distance \: covered }{Time \: taken}}}}[/tex]

[tex]\longrightarrow \sf{\frac{636 \times 3.14 m}{90s}} \\ \\ \longrightarrow \sf22.18 m/s[/tex]

[tex]\sf{Velocity = \frac{Displacement }{ Time} }[/tex]

[tex]\longrightarrow \sf{ \frac{2 \times 636m}{90s} } \\ \\ \longrightarrow \sf{14.13 \: m/s}[/tex]

Thank You :)

Answer:

B

Explanation:

the Halogen families have 7 valence electrons

The shape is connected in parallel so;

5.1) Ans;

[tex] \frac{1}{R} = \frac{1}{R1} + \frac{1}{R2} \\ \frac{1}{R} = \frac{1}{2} + \frac{1}{3} \\ \frac{1}{R} = \frac{3 + 2}{6} = \frac{5}{6} \\ R = \frac{6}{5} = 1.2 \: \: ohm[/tex]

5.2) Ans;

[tex] \frac{1}{R} = \frac{1}{R1} + \frac{1}{R2} \\ \frac{1}{R} = \frac{1}{8} + \frac{1}{10} \\ \frac{1}{R} = \frac{5 + 4}{40} = \frac{9}{40} \\ R = \frac{40}{9} = 4.4 \: \: ohm[/tex]

I hope I helped you^_^