What is the correct energy transformation in a hydropower dam?
well
(Sorry for the bad Quality it’s the Computer) PLEASE HELP MEEEE

Answer: D. Potassium bromide

Answer:

Plates at our planet's surface move because of the intense heat in the Earth's core

Explanation:

Hopefully this helps, I believe in you! ^^

Answer/Explanation:

movement can be cause by the intense heat in the earth's core, which causes molten rock in the mantle layer to move.  it moves in a pattern called 'convection cell' which can form when the warm material rises, then cools, and eventually sink down.  then the process repeats (cooled, warms up and rises.. etc..)

I hope this was what you were kinda looking for:) - T

PS. HAVE A GOOD DAY! I LIKEYOUR PROFILE HAFHAS

Answer:

Which best describes a difference between energy transformations in power plants and dams? Only power plants use fossil fuels to transform energy. Only dams use fission to generate thermal energy. ... Only dams use mechanical energy to produce electricity.

Explanation:

HOPE THIS HELP

PICK ME AS THE BRAINLIEST

Answer:

Slower shutter speeds like 1/60 second and slower cause a blurring effect. If you want to take a picture using a slow shutter speed, it is best to mount the camera on a tripod and use image stabilization (such as SteadyShot® technology) to reduce the chance of any unwanted camera movement.

The first big effect of it is motion blur. If your shutter speed is long, moving subjects in your photo will appear blurred along the direction of motion. ... If you use an especially fast shutter speed, you can eliminate motion even from fast-moving objects, like birds in flight, or cars driving past.

Explanation:

Answer:

the sun is the biggest source of visible (solar?) energy caused by the movement of waves of (electromagnetic?)

Not confident sry :(

Explanation:

Answer:

W is tungsten on the periodic table

Answer:

0.166M

Explanation:

In a neutralization, the acid, H₂SO₄, reacts with a base, KOH, to produce a salt, K₂SO₄ and water. The reaction is:

H₂SO₄ + 2KOH → K₂SO₄ + 2H₂O

To solve this problem, we need to determine moles of H2SO4 and moles of KOH that reacts to find the moles of sulfuric acid that remains after the reaction:

Moles H2SO4:

0.650L * (0.430mol /L) = 0.2795moles H2SO4

Moles KOH:

0.600L * (0.240mol / L) = 0.144 moles KOH

Moles of sulfuric acid that reacts with 0.144 moles of KOH are:

0.144 moles KOH * (1mol H2SO4 / 2 mol KOH) = 0.072 moles of H2SO4 react.

And remain:

0.2795moles H2SO4 - 0.072moles H2SO4 = 0.2075 moles of H2SO4 reamains.

In 0.650L + 0.600L = 1.25L:

Molar concentration of sulfuric acid:

0.2075 moles of H2SO4 / 1.25L =

Answer:

CO2

Explanation:

Answer:

[tex]M=0.8M[/tex]

Explanation:

Hello!

In this case, since the presence of silver ions is in AgNO3 only, we can compute their moles by using the volume and concentration of the corresponding salt:

[tex]n_{Ag^+}=2.00L*2.00\frac{mol}{L}=4molAg^+[/tex]

Next, since the total volume of solution C is 5.00 L, the required concentration of silver ions turn out:

[tex]M=\frac{4.00mol}{5L} =0.8M[/tex]

Best regards!

Answer:

Of oxygen would be 6 moles (4).

Explanation:

Since it is in a bracket you have to multiply 3 and tge 2 to get 6 oxygens.

The coefficients used to balance the chemical equation given in the question are 2, 4, 1 (Option A)

Chemical equations are representations of chemical reactions using symbols and formula of the reactants and products.

The reactants are located on the left side while the products are located on the right side.

Reactants —> Products

The balancing of chemical equations follows the law of conservation of matter which states that matter can neither be created nor destroyed during a chemical reaction but can be transferred from one form to another.

Ag₂O —> Ag + O₂

There are 2 atoms of O on the right side 1 on the left. It can be balance by writing 2 before Ag₂O as shown below

2Ag₂O —> Ag + O₂

There are 4 atoms of Ag on the left side and 1 atom on the right side. It can be balance by writing 4 before Ag as shown below

2Ag₂O —> 4Ag + O₂

Now, the equation is balanced.

Thus, the coefficients are: 2, 4, 1

Learn more about chemical equation:

https://brainly.com/question/7181548

#SPJ2

Answer:

the type is single replacement

The given reaction equation represents a single-replacement reaction.

Explanation:

                   ABC→ A+B+C

                   A+B+C → ABC

                   AB+ C → AC + B

                  AB+ CD → AC + BD

Given:

[tex]Fe + CuCl_2 \rightarrow FeCl_2 + Cu[/tex]

To find:

The type of chemical reaction represented by the given equation.

Solution:

In the given reaction:

[tex]Fe + CuCl_2 \rightarrow FeCl_2 + Cu[/tex]

Iron is replacing copper from its compound which is copper(II) chloride to give iron(II) chloride and copper as a product.

So from this, we can conclude that the given reaction equation represents a single-replacement reaction.

Learn more about types of chemical reactions here:

brainly.com/question/1071297?referrer=searchResults

brainly.com/question/12844777?referrer=searchResults

Answer:

237.8L of water would need to be added.

Explanation:

The first thing to do is to identify that the equation to be used is M1V1=M2V2. (This equation works because it turns everything into moles which can then be compared).

Then figure out what information you have and what is being found. In this case:

M1 = 54.7 M

V1 = 1092 mL = 1.092 L

M2 = 0.25 M

V2 = unknown

Then solve the equation for whatever you are trying to find.

M1V1=M2V2

V2=M1V1/M2

Now you need to plug everything in.

V2=(54.7M*1.091L)/0.25M

V2=238.93L

That means that the solution needs a volume of 238.7L to gain a molarity of 0.25M but the starting solution already had a volume of 1.092 L meaning that to find the amount of solvent that needs to be added you just subtract the starting volume by the volume that the solution needs to be.

238.93L - 1.091L = 237.8L

Therefore the answer is that 237.8L needs to be added to a 1.092L 54.7M NaCl solution to make the concentration 0.25M.

I hope this helps.  Let me know if anything is unclear.

Answer:

Formation of precipitate

Formation of soluble salts

Explanation:

Let's consider the molecular equation that takes place when an aqueous solution of cesium sulfate is mixed with an aqueous solution strontium perchlorate.

Cs₂SO₄(aq) + Sr(ClO₄)₂(aq) ⇒ 2 CsClO₄(aq) + SrSO₄(s)

According to the solubility rules:

For a double displacement reaction to occur, at least one of the products must be insoluble or volatile.

Answer:

It's b) Formation of a precipitate

Explanation:

I took the quiz and got it right.

Answer:

C

Explanation:

edge2021!!

Answer:  The correct answer is c. change attitudes, beliefs or values.

Explanation:

Of these goals, the hardest to achieve is changing attitudes, beliefs, and values. It is difficult to convince an audience to truly change their attitudes, beliefs, or values based on your presentation since it typically requires establishing trust and respect on a personal level.

Answer:

2 PO₄³⁻(aq) + 3 Mg²⁺(aq) ⇒ Mg₃(PO₄)₂(s)

Explanation:

Let's consider the molecular equation that occurs when aqueous solutions of lithium phosphate and magnesium nitrate are mixed.

2 Li₃PO₄(aq) + 3 Mg(NO₃)₂(aq) ⇒ 6 LiNO₃(aq) + Mg₃(PO₄)₂(s)

The complete ionic equation includes all the ions and insoluble species.

6 Li⁺(aq) + 2 PO₄³⁻(aq) + 3 Mg²⁺(aq) + 6 NO₃⁻(aq) ⇒ 6 Li⁺(aq) + 6 NO₃⁻(aq) + Mg₃(PO₄)₂(s)

The net ionic equation includes only the ions that participate in the reaction and insoluble species.

2 PO₄³⁻(aq) + 3 Mg²⁺(aq) ⇒ Mg₃(PO₄)₂(s)

Answer:

1.22 × 10^22 H atoms

Explanation:

From this question, TNT has the chemical formula: C-H5N306. The number of nitrogen atoms in the TNT substance is said to be 7.30 × 10^21 atoms.

The number of hydrogen atoms in the same TNT substance can be got using mole ratio. Based on the chemical formula, the mole ratio of hydrogen to nitrogen is 5:3 i.e. H5N3.

This means that;

Number of atoms of hydrogen = 5/3 of the number of atoms of nitrogen.

Hence, number of H atoms = 5/3 × 7.30 × 10^21

number of H atoms = (7.30 × 5/3) × 10^21

number of H atoms = (36.5/3) × 10^21

number of H atoms = 12.1666 × 10^21

number of H atoms = 1.2166 × 10^22 atoms.

Approximately, number of H atoms in TNT is 1.22 × 10^22 atoms.

Answer:

see explanation

Explanation:

If we look at the structures of each of the compounds we can be able to deduce the accurate hybridization of each of the atoms listed.

Looking at ClNO - we can see that the nitrogen atom is linked to oxygen by a double bond and linked to chlorine by a single bond retaining a lone pair on nitrogen. Hence the nitrogen is in sp2 hybridized state.

For ClOCl, the compound has a sp3 hybridized oxygen atom linked to two chlorine atoms as expected retaining two lone pairs on oxygen.

For NCOH, the carbon atom is doubly bonded to oxygen hence it is sp2 hybridized.

Answer:

A) Label 2 (Sp2)

B) Label 3 (Sp3)

C) Label 1 (Sp)

Explanation:

A) Have 7 Lone Pairs (LP) to place. 1 on N. 1 becomes a double bond. Double bonds count as 1 Electron Group. Same for single bond and LP. Add these to get 3. 3 coresponds for SP2

B) 8LP. 2LP on O. 2 bonds to O. Add to get 4. 4-> Sp3

C) 5LP. C O bond is double. single bond to N. Add to get 2-> Sp

Answer:

There are 6 hydrogen atoms.

Explanation:

The formula for an alkyne that has only one triple bond is as follows:

Where n is any natural number greater than 2.

For this problem, n=4. This would mean the formula is:

Thus

Thus the answer is 6, there are 6 hydrogen atoms.

Answer:

moles of calcium hydroxide= 21.75 mol

a) 43.5 mol

b) 7.25 mol

Explanation:

Please see the attached picture for the full solution.

Explanation:

The first wave was found to have a wavelength of 3 x 10⁵ m and the second wave had a wavelength of 3 x 10⁴ m

We need to find which wave have a higher frequency.

The relation between frequency and wavelength is given by :

[tex]c=f\lambda[/tex]

Let f₁ and f₂ be the frequency of wave 1 and wave 2.

[tex]f_1=\dfrac{c}{\lambda_1}\\\\f_1=\dfrac{3\times 10^8}{3\times 10^5}\\\\=1000\ Hz[/tex]

And

[tex]f_2=\dfrac{c}{\lambda_2}\\\\f_2=\dfrac{3\times 10^8}{3\times 10^4}\\\\=10000\ Hz[/tex]

Hence, the wave having less wavelength will have higher frequency. The wave having wavelength 3 x 10⁴ m will have higher frequency.

Answer: the erratic random movement of microscopic particles in a fluid, as a result of continuous bombardment from molecules of the surrounding medium. Brownian motion, or pedesis, is the random motion of particles suspended in a medium. This pattern of motion typically consists of random fluctuations in a particle's position inside a fluid sub-domain, followed by a relocation to another sub-domain. Brownian motion, also called Brownian movement, any of various physical phenomena in which some quantity is constantly undergoing small, random fluctuations. It was named for the Scottish botanist Robert Brown, the first to study such fluctuations (1827).

Hope this helps...... Stay safe and have a Merry Christmas!!!!!!!!! :D

Explanation:

Answer:

to and fro motion is called brownian motion

Answer:

A.wood

Explanation:

It is a poor conductor of heat

Answer: 143*tank temperature/tank pressure L

Explanation: too few data. Need to know the pressure and what if any, temperature change.

tank volume = (tank temp/tank pressure)*(500*200/700) = 143*tank temp/tank pressure L

At constant temperature, (500*700)/tank temp

e.g. at 1400mm Hg, 500*700/1400 = 250L

Answer:

0.05

moles

Explanation:

In a mole of any substance, there exist

6.02⋅1023

units of that substance.

So here, we got:

3.01⋅1022Mg atoms⋅1mol6.02⋅1023M gatoms=0.05mol

Answer:

4-ethylhex-2-yne

Explanation:

Answer:

need points

Explanation:

Answer:

the yeast did not produce the carbon dioxed needed for the bread to rise.

Explanation:

i am not fooly sure but i think its it

but warn me if i am wrong pweez