Answer:
C.
Explanation:
Return stroke
A return stroke is termed to be the most visible part of a lightning, which in itself is accompanied by a thunderstorm. Lightning causes thunder, which like I said, is a sound from the shock wave that develops like gases in the areas of the discharge. While experiencing a sudden increase in its pressure. Lightning occurs naturally and is electrically charged.
I need help ASAP!
1. Two wave pulses move towards each other as shown below. The pulses have the same width and amplitudes.
What is the resulting wave pattern when the centers of the two pulses meet?
Answer:
b.
Explanation:
The resulting wave pattern when the centers of the two pulses meet is undergo constructive interference.
When two waves meet?Waves are pulses of energy that propagate through space periodically. When two waves overlap in the same region of space, interference occurs, which results in another wave with different intensity. These variations in the intensity of the resulting wave are called interference fringes.
The two pulses propagate with the same phase and in opposite directions, when they meet, they suffer constructive interference, which will cause the sum of the amplitudes. After interference, each wave goes its way as if nothing happened.
See more about waves at brainly.com/question/3639648
Which of the following is correct? *
PLEASE HELP MEEEE
1 cm = 100 m
1 mm = 100 cm
100 mm = 1 cm
1 m = 100 cm
Answer:
The last one
1m = 100 cm
Explanation:
If you do not trust me look it up
A 10.0kg object is moving at 1 m/s when a force is applied in the direction of the objects motion, causing it to speed up to 4 m/s. If the force was applied for 5s what is the magnitude of the force
Answer:
F = 6[N].
Explanation:
To solve this problem we must use the principle of conservation of linear momentum, which tells us that momentum is conserved before and after applying a force to a body. We must remember that the impulse can be calculated by means of the following equation.
[tex]P=m*v\\or\\P=F*t[/tex]
where:
P = impulse or lineal momentum [kg*m/s]
m = mass = 10 [kg]
v = velocity [m/s]
F = force [N]
t = time = 5 [s]
Now we must be clear that the final linear momentum must be equal to the original linear momentum plus the applied momentum. In this way we can deduce the following equation.
[tex](m_{1}*v_{1})+F*t=(m_{1}*v_{2})[/tex]
where:
m₁ = mass of the object = 10 [kg]
v₁ = velocity of the object before the impulse = 1 [m/s]
v₂ = velocity of the object after the impulse = 4 [m/s]
[tex](10*1)+F*5=10*4\\10+5*F=40\\5*F=40-10\\5*F=30\\F=6[N][/tex]
which property of an object is not changed by a force
TRUE/FALSE, the scientific question is written like “I wonder if [dependent variable] is affected by [independent variable].”
In an open circuit like the picture
A. the light bulb will produce light
B. a resistor controls the flow of current
C. the light bulb will be off
D. current will flow
In an open circuit like the picture the light bulb will be off. So, option (C) is correct.
What is electric circuit?Electric circuit is a way for current to flow through electricity. An electric circuit consists of a source of energy for the charged particles that make up the current, like a battery or generator; sources of current-using equipment, like lamps, electric motors, or computers; and the connecting wires or transmission lines.
Ohm's law and Kirchhoff's rules are two of the fundamental mathematical laws that define how electric circuits function.
In the given diagram, the circuit is open. So, no current passes through it and the light bulb will be off. Hence, option (C) is correct.
Learn more about electric circuit here:
https://brainly.com/question/29032441
#SPJ2
what two charactoristic are needed to describe a force
Answer:
An applied force, A resistive force
Explanation:
An applied force is an interaction of one object on another that causes the second object to change its velocity.
A resistive force passively resists motion and works in a direction opposite to that motion.
A car starts from point A, goes 100 km to point B, immediately turns around, and returns to point A. The round trip takes 4 hours.
What is the average speed of the car?
Answer:
50 km/h
Explanation:
200 km = 4 hours
200/4=50
50km/h
When an element ejects an alpha particle, the mass number of that element
A.reduce by 4.
B.remains unchanged.
C.increase by 1.
D. reduce by 1.
Answer:
A.reduce by 4.
Explanation:
In Chemistry, an alpha particle which is typically a helium nucleus has an atomic mass (number of nucleons) of four (4). Therefore, the ejection of an alpha particle by any chemical element simply means that, the mass number of that particular chemical element would be reduced by four (4).
Basically, this process is referred to as an alpha decay and can be defined as a radioactive disintegration of a chemical element that causes it to emit an alpha particle and as a result reducing its mass number by four (4).
Hence, when an element ejects an alpha particle, the mass number of that element reduces by 4.
A 96 kg man lying on a surface of negligible friction shoves a 75 g stone away from himself, giving it a speed of 7.2 m/s. What speed does the man acquire as a result?
Answer:
7.21m/s
Explanation:
Using the law of conservation of momentum expressed as;
m1u1 + m2u2 = (m1+m2)v
m1 and m2 are the mass of the man and the stone respectively
u1 and u2 are their respective initial velocities
v is their final common velocity
Given
m1 = 96kg
m2 = 75g = 0.075kg
u1 = ?
u2 = 0m/s (initial speed of the stone)
v = 7.2m/s
Substitute into the firmula and get u1
96u1 + 0.075(0) = (96 + 0.075)(7.2)
96u1 = 96.075(7.2)
u1 = 691.74/96
u1 = 7.21m/s
Hence the man acquired a speed of 7.21m/s
Bob Beamon's 1968 Olympic long jump set a world record which remains unbroken to this day. This amazing jump resulted from an initial velocity of 9.5 m/s at an angle of 40 degrees from the horizontal.
1. Calculate the initial horizontal velocity (V_ix) to two significant figures:
2. Calculate the initial vertical velocity (V_iy) to two significant figures:
3. Calculate the time needed to reach the highest point of the jump (t_1/2) to two significant figures:
4. Calculate the total time (t_TOT) needed to complete the jump to two significant figures:
5. Calculate the maximum height (h) reached during the jump to two significant figures:
6. Calculate the range (total horizontal distance) of his jump to two significant figures:
Please answer today! Thanks!
Answer:
1.) 7.3 m/s 2.) 6.1 m/s
Explanation:
To calculate the initial horizontal velocity with just degrees and velocity alone is pretty simple. The formula is Velocity*cos(degrees)
eg 9.5*cos(40)
2. To calculate the initial vertical velocity with just degrees and velocity alone is pretty simple. The formula Velocity*sin(degrees)
eg 9.5*sin(40)
Match the scienntist with their accomplishment / discoveries
Answer:
newton - motion, gravity
kepler - orbital paths
brahe - the sun goes around the earth
Explanation:
im not sure about brahe but its the only one that makes sense
A 5.0-g object carries a net charge of 3.8 micro-Coulomb. It acquires a speed v when accelerated from rest through a potential difference V. A 2.0-g object acquires twice the speed under the same circumstances. What is its charge?
Answer:
The value is [tex]q_2 = 6.1 *10^{-6} \ C[/tex]
Explanation:
From the question we are told that
The mass of the object is [tex]m_1 = 5.0 \ g = 0.005 \ kg[/tex]
The net charge is [tex]q = 3.8 \mu C= 3.8 *10^{-6} \ C[/tex]
The mass of the second object is [tex]m_1 = 2.0 \ g = 0.002 \ kg[/tex]
Generally for the first object the potential energy gained at the end of its acceleration is equal to its kinetic energy
i.e
[tex]\frac{ 1}{ 2} * m_1 * v^2_1 = q_1 * \Delta V \ \ --- (1)[/tex]
Here [tex]v_1[/tex] is the velocity of the first object
[tex]\Delta V[/tex] is the potential difference through which it is accelerated
Generally for the second object the potential energy gained at the end of its acceleration is equal to its kinetic energy
i.e
[tex]\frac{ 1}{ 2} * m_2 * v^2_2 = q_2 * \Delta V[/tex]
Here [tex]v_2[/tex] is the velocity of the second object and from the question it is
[tex]v_2 = 2 v_1[/tex]
[tex]\Delta V[/tex] is the potential difference through which it is accelerated
So
[tex]\frac{ 1}{ 2} * m_2 * (2v)^2_1 = q_2 * \Delta V[/tex]
=> [tex]m_2 * 2v^2_1 = q_2 * \Delta V \ \ ---(2)[/tex]
Generally dividing equation 2 by equation 1
[tex]\frac{2m_2 v^2_1 }{ \frac{1}{2} * m_1 * v_1^2} = \frac{q_2 \Delta V }{ q_1 * \Delta V}[/tex]
=> [tex]q_2 = \frac{4m_2 * q_1 }{m_1}[/tex]
=> [tex]q_2 = \frac{4* 0.002 * 3.8 *10^{-6} }{0.005}[/tex]
=> [tex]q_2 = 6.1 *10^{-6} \ C[/tex]
=> [tex]q_2 = 6.1 *10^{-6} \ C[/tex]
Putting the selected answers in parenthesis
A cation has a (Negative, Positive, Neutral) charge, because they have (Lost, Maintained, Gained) electrons. An anion has a (Negative, Positive, Neutral) charge, because they have (Lost, Maintained, Gained) electrons. An atom with the same number and protons and neutrons have a (Negative, Positive, Neutral) charge.
Answer:
gimmie
Explanation:
what would the net force be on the box in the problems shown below.( both force and direction).
Answer:
4
Explanation:
The net force on the box a will be 20 N to the left and that on box b is 6 N downwards. The net force on box c is 90 N to the left and that on box d is zero.
What is net force?Force is an external agent acting on a body to change its motion or to deform it. The net force acting on a body depends on all the the forces with their magnitudes and directions.
If two same or different forces acts from the same direction they will add up and net force will be their sum. If they acts from the different directions, they will cancel each other in magnitudes.
In box a, the equal forces of 20 N opposes from each direction cancel and the net force will be 20 N to the left. I box b the 15 N cancel each other. Where the 4N and 2 N add up to have net force of 6 N downwards.
In box c, 10 N from opposite direction cancels and the 60 N and 30 N to the left add ups to have the net force of 90 N to the left. On box d, 5 N from opposite directions cancels as 12 N. Hence, net force is zero.
Find more on net force:
https://brainly.com/question/13410291
#SPJ5
A 300 kg piano needs to be moved to the other side of the room. The maximum static frictional force is equal to 90 N and the kinetic frictional force is equal to 70 N. Calculate the acceleration of the piano for an applied force of 100 N.
Answer:
a = 0.1 m/s²
Explanation:
If the maximum static frictional force is 90 N, this means that any applied force that will overcome this force, will cause the piano to slide, so kinetic frictional force applies.Under these conditions, the net force in the horizontal direction is just the difference between the applied force (which is larger that the static friction force) and the kinetic frictional force, as follows:[tex]F_{net} = F_{app} -F_{frk} = 100 N - 70 N = 30 N (1)[/tex]
By the same token, according Newton's 2nd Law, this force is just equal to the product of the mass of the piano, times the acceleration, as follows:[tex]F_{net} = m* a = 300 Kg * a = 30 N (2)[/tex]
Solving for a:[tex]a = \frac{F_{net}}{m} = \frac{30 N}{300kg} = 0.1 m/s2 (3)[/tex]
A tennis ball moves 16 meters northward, then 22 meters southward, then 12 meters northward, and finally 32 meters southward.
it is easier to climb up a slanted slope than a vertical slope
Answer:
Yes, it is easier to climb a slanted slope than a vertical or more steep slope.
Explanation:
On a vertical slope, you are climbing higher instead of farther so on each step gravity weighs you down much more than on a gentle slope
1+1=?
FIRST ONE TO ANSWER GETS BRAINLIEST!
Answer:
Thx for points merry Christmas answer 2
Explanation:
Answer:2
Explanation:
Which of the following is the cause of an acceleration?
[tex]{\tt{\red{\underline{\underline{\huge{Answer:}}}}}}[/tex]
[tex]\longrightarrow[/tex] The rate of change of velocity per unit time is called acceleration.
[tex]\longrightarrow[/tex] Its SI unit is m/s².
[tex]\huge\boxed{\fcolorbox{blue}{red}{Thank you}} [/tex]
we have that from the Question"Which of the following is the cause of an acceleration?" it can be said that
Acceleration cause bodies to move at an increasing rate after which a velocity or speed is maintained Force is a main cause of Acceleration andacceleration is seen at a change in velocityFrom the Question we are told
Which of the following is the cause of an acceleration?
Generally the equation for acceleration is mathematically given as
[tex]a=\frac{F}{m}\\\\or\\\\a=\frac{u-v}{dt}\\\\[/tex]
Therefore
Acceleration cause bodies to move at an increasing rate after with a velocity or speed is maintained Force is a main cause of Acceleration andacceleration is seen at a change in velocitySo in the selection of the option consider these points of acceleration
Acceleration cause bodies to move at an increasing rate after which a velocity or speed is maintained Force is a main cause of Acceleration andacceleration is seen at a change in velocityFor more information on this visit
https://brainly.com/question/22610586?referrer=searchResults
32. Which type of electromagnetic wave is used for nuclear power and medical treatment?
A. UV wave
B.Radio wave
C.Visible light wave
D. Gamma ray
Which of the following is a way that microwaves and x-rays are similar?
A. They both have technological uses.
B. They are both high energy waves,
C. They are both safe to be exposed to at high doses
D. They are both used to transmit information.
Answer:
Answers at the bottom!!
Explanation:
For the first answer: Gamma ray
Gamma rays and x-rays consist of high-energy waves that can travel great distances at the speed of light and generally have a great ability to penetrate other materials. For that reason, gamma rays (such as from cobalt-60) are often used in medical applications to treat cancer and sterilize medical instruments.
For the second answer: They both have technological uses.
In my opinion I'm pretty sure it's A because we do use microwaves and x-rays as technological uses.
Hope this helps!!
Happy Holidays and Season Greeting!!
ii Feliz Navidad a todos !!
Gamma rays and x-rays consist of high-energy waves that can travel great distances at the speed of light and generally have a great ability to penetrate other materials. For that reason, gamma rays (such as from cobalt-60) are often used in medical applications to treat cancer and sterilize medical instruments.
What are gamma rays ?"A gamma ray (g) is a packet of electromagnetic energy (photon) emitted by the nucleus of some radionuclides following radioactive decay." Gamma photons are the most energetic photons in the electromagnetic spectrum.
What are x-rays ?"An X-ray, or, much less commonly, X-radiation, is a penetrating form of high-energy electromagnetic radiation." Most X-rays have a wavelength ranging from 10 picometers to 10 nanometers, corresponding to frequencies in the range 30 petahertz to 30 exahertz and energies in the range 145 eV to 124 keV.
Know more about gamma rays here
https://brainly.com/question/23281551
# SPJ2
They both have technological uses.
Microwaves and x-rays have in common is all electromagnetic waves, electric and magnetic fields that oscillate together, perpendicular to each other.
What is technological usage?
"The application of practical sciences to industry or commerce." The methods, theory, and practices governing such application. a highly developed technology. The total knowledge and skills available to any human society for industry, art, science, etc.
What are technological uses of microwave and x-ray ?Microwaves are used in spacecraft communication, and much of the world's data, TV, and telephone communications are transmitted long distances by microwaves between ground stations and communications satellites. Microwaves are also employed in microwave ovens and in radar technology.
They are used on such products as aircraft and rocket parts and structures, canned and packaged foods, electronics, semiconductors and microchips, thermal insulations, and automobile tires. Material processing technologies use X-ray systems to automatically control the density or thickness of layers of substances.
Know more about microwaves and x-rays here https://brainly.com/question/15708046
#SPJ2
Brandon hits a golf ball with an initial velocity of 30 m/s at an angle of 30 above the horizontal. How long is it in the air?
Given :
Brandon hits a golf ball with an initial velocity of 30 m/s at an angle of 30 above the horizontal.
To Find :
How long is it in the air.
Solution :
We know, the formula of time of flight is :
[tex]T = \dfrac{2usin\ \theta}{g}\\\\T = \dfrac{2\times 30\times sin\ 30^o}{9.8}\\\\T = 3.06\ seconds[/tex]
Therefore, the ball is in air for 3.06 seconds.
calculate the net force
250N left force and right force is 150N
Answer
100N on the left force
Explanation:
You have to subtract 250 - 100 and the reamaining would be 100 and that 100 would go to the left force since it was the higher number
what is mean by combination reaction ?
[tex] \underline{\purple{\large \sf Combination \: reaction :-}} [/tex]
Those reaction in which two or more substances combine to form a one new substance are called Combination reaction
In this reaction, We can add :
Two or more elements can combine to form a compound.Two or more compounds can combine to from a one new compound.An element and a compound can combine to form a new compound.[tex] \underline{\green{\large \sf For\: example :}} [/tex]
[tex] \sf 2H_{2} + O_{2} \: \underrightarrow{Combination} \: 2H_{2}o[/tex]
In this, Hydrogen is an element and Oxygen is another element. Both are combined to form compound 'Hydrogen oxide'. Hydrogen oxide is commonly known as water.
A dog can provide sufficient power to pull a sled with a 60 N force at a steady 2.0 m/s. Suppose the dog is hitched to a different sled that requires 120 N to move at a constant speed. How fast can the dog pull this second sled?
Answer:
v = 1.0 m/s
Explanation:
Applying the definition of power (rate of change of energy with respect to time), and the definition of average speed, we can say that the power is the product of the net force applied, times the speed achieved by the force on the mass of the object, as follows:P = F* vIn this case, this power can be written as follows:P = 60 N * 2.0 m/s = 120 J/s = 120 WIf the power remains constant, but now it is required a force of 120 N to move the sled at a constant speed, it is clear that the maximum speed possible will be 1.0 m/s, due to 120 N* 1.0 m/s = 120 W, which is the maximum power available.What are Newton’s 3 laws of motion?
Answer: It states that for every action, there is an equal and opposite reaction.
I hope this helps, and Happy Holidays! :)
true or false The most extreme tides occur during a new
moon and full moon.
Answer:
true
Explanation:
PLEASE HELP :(
I WILL GIVE EXTRA POINTS
1. When is the kinetic energy of an electron transformed into potential energy?
when it interacts with other electrons, decreasing its speed
when it interacts with neutrons without changing its speed
when it interacts with neutrons , increasing its speed
when it interacts with other electrons without changing its speed
2. Atoms bond to form molecules. Which structures or regions of the atoms interact in bonds ?
electric fields of particles with positive charge
electric fields of particles with no charge
electric fields of particles with negative charge
electric fields of particles with opposite charges
3. If two electrons that are apart get pushed toward each other, how does the repulsion between them change?
Initial repulsion is low and decreases as they approach .
Initial repulsion is high and decreases as they approach .
Initial repulsion is high and increases as they approach .
Initial repulsion is low and increases as they approach .
4. A positive charge of 5.0x10 ^ -5 C °is 0.040 m from a second positive charge of 2.0x10 ^ -6 C Calculate the force between the charges.
5.6x10^2 N
5.6x10^2 N
1.4X10^-2 N
2.3X10^1 N
(a) When the kinetic energy of an electron is transformed into potential energy is when it interacts with other electrons, decreasing its speed.
(b) The region of atoms that interact in bonds is electric fields of particles with negative charge.
(c) Initial repulsion is low and increases as they approach.
(d) The force between the charges is 562.5 N.
Kinetic theory of matter
This theory states that, the collision of particles (electrons) of matter is perfectly elastic. This implies that as the particles (electrons) collides with one another, kinetic energy is transferred from one electron to another.
ΔK.E = ΔP.E
Change in kinetic energy is equal to change in potential energy of the electrons.
Thus, when the kinetic energy of an electron is transformed into potential energy is when it interacts with other electrons, decreasing its speed. Decrease in speed implies decrease in kinetic energy and increase in potential energy.
Chemical bonds of moleculesChemical bond is formed from the transfer or sharing of electrons between atoms. (electrons between atoms implies negative charge to negative charge)
Thus, the region of atoms that interact in bonds is electric fields of particles with negative charge.
Coulomb's law
This law states that the force of attraction or repulsion between two charges is directly proportional to the product of the charges and inversely proportional to the distance between the charges.
[tex]F = \frac{kq_1q_2}{r^2}[/tex]
When the distance between the electrons are large, the repulsive force is low and the distance is small, the repulsive force is high.
Force between the chargesThe force between the charges is determined by applying Coulomb's law,
[tex]F = \frac{kq_1q_2}{r^2} \\\\F = \frac{9\times 10^9\times (5 \times 10^{-5}) \times (2\times 10^{-6})}{0.04^2} \\\\F = 562.5 \ N[/tex]
Learn more about Coulomb's law here: https://brainly.com/question/24743340
a hiker walks westward 2 meters and then eastward 7 meters. for this motion the distance moved is?
Answer:
d = 9 [m]
Explanation:
This is a problem where we must be clear about the concept of distance, which tells us that it is a measure of the space traveled on a trajectory.
Therefore:
d = 2 + 7
d = 9 [m]
The directions are not taken into account, as it is the sum of the displacements traveled, regardless of their directions.
A car jack works when a mechanic uses a force 3.8 N, on a small piston of radius 10 cm. What force can he exert on a larger piston of radius 0.22 m?
Answer:
18.392 N
Explanation:
Given that,
Smaller force acting on the car, F₁ = 3.8 N
Radius of smaller radius, r₁ = 10 cm = 0.1 m
The radius of the larger piston, r₂ = 0.22 m
We need to find the force exerted on the larger piston. Let it is F₂.
Using the relation,
[tex]\dfrac{F_1}{F_2}=\dfrac{A_1}{A_2}\\\\\dfrac{F_1}{F_2}=\dfrac{\pi r_1^2}{\pi r_2^2}\\\\\dfrac{F_1}{F_2}=\dfrac{r_1^2}{r_2^2}\\\\F_2=\dfrac{F_1r_2^2}{r_1^2}\\\\F_2=\dfrac{3.8\times (0.22)^2}{(0.1)^2}\\\\F_2=18.392\ N[/tex]
Hence, the force exerted on the larger piston is 18.392 N.
