What is the formula for copper sulfate with 2 waters adhering to each molecule?

Answer:

D

Explanation:

calicium exchange valency of 2 with 1 valency of chlorine

Answer:

The industry represented in the photo is most likely fishing. Other industries that rely on accurate weather forecasts are shrimping, fishery, and aquaculture

Explanation:

Mg-19:

#protons = 12

#neutrons = 7

#electrons = 12

Mg-40:

#protons = 12

#neutrons = 28

#electrons = 12

Answer:

[tex]1 \: litre \: contain \: 0.10 \: moles \: of \: hydrochloric \: acid \\ 0.75 \: litres \: contain \: (0.75 \times 0.10) \: moles \\ = 0.075 \: moles \\ total \: volume = 0.75 + 0.35 \\ = 1.1 \: litres \\ 1.1 \: litres \: contain \: 0.075 \: moles \\ 1 \: litres \: will \: contain \: ( \frac{1 \times 0.075}{1.1} ) \\ = 0.068 \: mol \: {l}^{ - 1} [/tex]

Answer:

Explanation:

Did you get the answer to the test, I have the same one but don’t understand the questions that well

Answer:

Hydroxyl (alcohol compound)

Explanation:

*view photo*

D. Hydroxy

Therefore, the correct option is option D.

Learn more:

brainly.com/question/696051

Answer:

0.978L

Explanation:

Using Boyle's law equation as follows;

P1V1 = P2V2

Where;

P1 = initial pressure (atm)

P2 = final pressure (atm)

V1 = initial volume (L)

V2 = final volume (L)

According to the provided information,

P1 = 1.49 atm

V1 = 5.00 liters

P2 = 7.62 atm

V2 = ?

Using P1V1 = P2V2

1.49 × 5 = 7.62 × V2

7.45 = 7.62V2

V2 = 7.45/7.62

V2 = 0.978L

oh sorry I'm American I can't understand that

Explanation:

but...thanks for points hehe

Answer:

growth medium

Explanation:

The pathogenic bacteria are the bacteria which causes diseases. They may include fungi, worms, protozoa, viruses, bacteria, etc.

The bacterial pathogens are made to grow with the help of a growth medium which is developed to optimize the antigen's yield and also it maintains the integrity of the pathogenic bacteria.

The heat evolved when 74.6 g of sulfur dioxide (molar mass = 64.07 g/mol) is 2838kJ/mol. For the given thermochemical equation.

SO2(g) + 12 O2(g)

SO3(g)

AH = -99.1 kJ/mol

A balanced stoichiometric chemical equation known as a thermochemical equation contains the enthalpy change, ΔH.

There are two types of thermochemical reaction:

Thermogenic Reaction. certain thermochemical processes that absorb heat. Enthalpy change for this reaction is favorable.

Heat-producing Reaction. Exothermic reactions are those in which energy or heat are released during the reaction.

A chemical equation shows the initial molecule, reactants, and final products separated by an arrow, but a thermochemical equation is a balanced stoichiometric chemical reaction that also includes the enthalpy change.

Thus, 2838 kJ/mol heat evolved in given equation.

To learn more about thermochemical equation refer the link below;

https://brainly.com/question/10023358

#SPJ2

Answer:

Potential energy

Explanation:

[tex]p.e = mgh[/tex]

Answer:

1 mole

Explanation:

if correct you may follow me for more helps

Among the given quantities, the greatest mass of chlorine is represented by one molecule of chlorine Cl₂ that is equal to 71 grams.

A molecule of an element is formed by the combination of two atoms of that element. One mole of an element is the amount containing 6.022 × 10²³ atoms. This s number is called Avogadro number.

The mass of one mole of an element is called its atomic mass. Cl is 17th element. Atomic mass of Cl = 35.5 g

35.5 g of Cl is called one mole of Cl containing Avogadro number of atoms.

One molecule of Cl is represented as Cl₂ with the mass = 35.5 × 2 = 71 g.

This is the molecular mass of Cl.

One gram of Cl is small amount and mass of one atom of Cl is even smaller. Thus, one molecules of Cl represents the greater mass here. Hence, option D is correct.

Find more on molecular mass:

https://brainly.com/question/3182776

#SPJ2

Answer:

C) Water acts as a strong base

Explanation:

The water acts as a strong base, when water dissolves in Ammonia.

Ammonia reacts with water to make a clear solution of ammonium hydroxide, or household ammonia.

Answer:

mother

Explanation:

Answer:

A

Explanation:

0.2g of atom of nitrogen is the one that weigh least cause of.2g is not up to one mole of nitrogen

Answer:

La respuesta está en la explicación.

Explanation:

Las propiedades físicas son las visibles y medibles que no afectan químicamente la sustancia en cuestión. Las propiedades químicas hacen alusión a la reactividad de la sustancia:

Propiedades físicas ácido sulfúrico:

Líquido a temperatura ambiente.

Densidad: 1.83g/mL

Punto de fusión: 10°C

Punto de ebullición: 337°C

Índice de refracción: 1.397

Propiedades Químicas:

Ácido Fuerte.

Oxidante Fuerte.

Miscible con el agua reaccionando exotérmicamente.

A temperaturas > 30°C produce vapores azufrados.

Estable en concentraciones menores al 98%

Answer:

C

Explanation:

As air is pumped out of the jar, the water begins to boil because "the air pressure in the jar has been lowered until it is equal to the vapor pressure of the water."

The force is applied perpendicular to an object's surface per unit area across which that force is spread is known as pressure. The pressure gauge in relation to the higher pressures would be known as gauge pressure. Pressure is measured in a variety of ways.

Equilibrium or vapor pressure The pressure exerted by a vapor in thermodynamic equilibrium including its condensed phases at a particular temperature in a closed system is known as vapor pressure.

The temperature where the vapor pressure of liquid water matches the ambient pressure is known as the boiling point of water. Because we know that pressure,  temperature, as well as temperature, are directly related, water with a high boiling point will have a high boiling point, whereas water with a low boiling point will have a low boiling point.

When we maintain a vacuum (pressure lower than atmospheric pressure), water starts to boil at temperatures below 100 degrees Celsius.

Hence the correct answer will be option 3

To know more about air pressure here

https://brainly.com/question/25699778.

#SPJ2

Answer: The molarity of KBr solution is 0.605 M

Explanation:

Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L.

The formula used to calculate molarity:

[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (mL)}}[/tex]       .....(1)

Given values:

Given mass of KBr = 54.0 g

Molar mass of KBr = 119 g/mol

Volume of the solution = 750 mL

Putting values in equation 1, we get:

[tex]\text{Molarity of solution}=\frac{54.0\times 1000}{119\times 750}\\\\\text{Molarity of solution}=0.605M[/tex]

Hence, the molarity of KBr solution is 0.605 M

Answer:

Up until now we have been discussing only the elemental forms of atoms which are neutrally charged. This is because the number of electrons (negative in charge) is equal to the number of protons (positive in charge). The overall charge on the atom is zero, because the magnitude of the negative charge is the same as the magnitude of the positive charge. This one-to-one ratio of charges is not, however, the most common state for many elements. Deviations from this ratio result in charged particles called ions.

Throughout nature, things that are high in energy tend to move toward lower energy states. Lower energy configurations are more stable, so things are naturally drawn toward them. For atoms, these lower energy states are represented by the noble gas elements. These elements have electron configurations characterized by full s and p subshells. This makes them stable and unreactive. They are already at a low energy state, so they tend to stay as they are.

The elements in the other groups have subshells that are not full, so they are unstable when compared to the noble gases. This instability drives them toward the lower energy states represented by the noble gases that are nearby in the periodic table. In these lower energy states, the outermost energy level has eight electrons (an “octet”). The tendency of an atom toward a configuration in which it possesses eight valence electrons is referred to as the “Octet Rule.”

There are two ways for an atom that does not have an octet of valence electrons to obtain an octet in its outer shell. One way is the transfer of electrons between two atoms until both atoms have octets. Because some atoms will lose electrons and some atoms will gain electrons, there is no overall change in the number of electrons, but with the transfer of electrons the individual atoms acquire a nonzero electric charge. Those that lose electrons become positively charged, and those that gain electrons become negatively charged. Recall that atoms carrying positive or negative charges are called ions. If an atom has gained one or more electrons, it is negatively charged and is called an anion. If an atom has lost one or more electrons, it is positively charged and is called a cation. Because opposite charges attract (while like charges repel), these oppositely charged ions attract each other, forming ionic bonds. The resulting compounds are called ionic compounds.

The second way for an atom to obtain an octet of electrons is by sharing electrons with another atom. These shared electrons simultaneously occupy the outermost shell of both atoms. The bond made by electron sharing is called a covalent bond. Covalent bonding and covalent compounds will be discussed in Chapter 4 “Covalent Bonding and Simple Molecular Compounds”.

At the end of chapter 2, we learned how to draw the electron dot symbols to represent the valence electrons for each of the elemental families.  This skill will be instrumental in learning about ions and ionic bonding. Looking at Figure 3.1, observe the Noble Gas family of elements. The electron dot symbol for the Nobel Gas family clearly indicates that the valence electron shell is completely full with an octet of electrons.  If you look at the other families, you can see how many electrons they will need to gain or lose to reach the octet state.  Above, we noted that elements are the most stable when they can reach the octet state. However, it should also be noted that housing excessively high negative or positive charge is unfavorable.  Thus, elements will reach the octet state and also maintain the lowest charge possible.   You will note that for the IA, IIA, IIIA and transition metals groups, it is more economical to lose electrons (1-3 electrons) from their valence shells to reach the octet state, rather than to gain 5-7 electrons.  Similarly main group columns VA, VIA, and VIIA tend to gain electrons (1-3) to complete their octet, rather than losing 5-7 electrons. Some atoms, like carbon, are directly in the middle.  These atoms don’t like to gain or lose electrons, but tend to favor the sharing model of chemical bonding. The remaining sections of this chapter will focus on the formation of ions and the resulting ionic compounds.

Explanation:

Answer:

Radioactive decay is the process by which an unstable atomic nucleus loses energy by radiation. A material containing unstable nuclei is considered radioactive. Three of the most common types of decay are alpha decay, beta decay, and gamma decay, all of which involve emitting one or more particles or photons.

Explanation:

Answer:

120 L

Explanation:

Step 1: Given data

Step 2: Convert the temperatures to the Kelvin scale

We will use the following expression.

K = °C + 273.15

K = 91°C + 273.15 = 364 K

K = 0.00°C + 273.15 = 273.15 K

Step 3: Calculate the final volume occupied by the oxygen

Assuming ideal behavior and constant pressure, we can calculate the final volume occupied by the oxygen using Charles' law.

V₁/T₁ = V₂/T₂

V₂ = V₁ × T₂/T₁

V₂ = 160 L × 273.15 K/364 K = 120 L

Hola aquí va la respuesta!

Se fomentó la inmigración europea porque la economía no era buena y vinieron a Paraguay para mejorar su situación.

Hola aquí va la respuesta!

Se fomentó la inmigración europea porque la economía no era buena y vinieron a Paraguay para mejorar su situación.

Answer:

A. True

B. False

Explanation:

Reaction between hypochlorous acid and ammonia does not yields a Ph value of 7.00 , this value is defined to water and no other reaction can yield exactly this Ph value. The acid reaction will give a Ph value below 7 while a base reaction will give Ph value of above 7.

Answer:

With my knowledge you got 2. correct, but that's all I could say.

Answer:

True

Explanation:

Reason being there are 3 systems even in the open system the heat and matter goes in and out , the closed system the heat goes in and out as well and in the isolated system it stays in

Answer:

Put the items that contains mercury in a zipper top bag and seal the bag. Place the sealed bag in a plastic container with a lid. Pack the container with kitty litter or newspapers to prevent breakage. Make sure the container is labeled “Mercury: Do Not Touch.”

Explanation:

Explanation:

An exothermic reaction is a "reaction for which the overall standard enthalpy change ΔH⚬ is negative." Exothermic reactions usually release heat and entail the replacement of weak bonds with stronger ones.

hope it helps

Answer:

Explanation:

Answer:

La reacción de etano, CH₃CH₃ y cloro, Cl₂ en presencia de luz solar se conoce como reacción de halogenación.

Los radicales de cloro se forman cuando el cloro se expone a la luz solar a continuación;

Cl₂ → 2Cl *

Se forma un radical etano cuando el etano, C₂H₆ reacciona con un radical libre de cloro, Cl *, como sigue;

C₂H₆ + Cl → C₂H₅ * + HCl

Se forma un producto halogenado cuando un radical libre de etano reacciona con una molécula de cloro como sigue;

C₂H₅ * + Cl₂ → C₂H₅Cl + Cl *

Un producto halogenado puede reaccionar además con un radical libre para producir como sigue;

C₂H₅Cl + Cl * → C₂H₅Cl₂

Explanation:

Answer:

B.

[tex]from \: eisteins \: energy \: relation : \\ E = hf \\ h \: is \: plancks \: constant\\ 3.26 \times {10}^{ - 19} = 6.63 \times {10}^{ - 34 } \times f \\ f = \frac{3.26 \times {10}^{ - 19} }{6.63 \times {10}^{ - 34} } \\ f = 4.92 \times {10}^{14} \: Hz[/tex]