What is the molar mass of Na2SO4?
O A. 142.04 g/mol
O B. 71.05 g/mol
O c. 238.22 g/mol
O D. 94.04 g/mol

Answer:

Phenols do not exhibit the same pka values as other alcohols;

They are generally more acidic.

Using the knowledge that hydrogen acidity is directly related to the stability of the anion formed, explain why phenol is more acidic than cyclohexane.

Explanation:

According to Bromsted=Lowry acid-base theory,

an acid is a substance that can release [tex]H^{+}[/tex] ions when dissolved in water.

So, acid is a proton donor.

If the conjugate base of an acid is more stable then, that acid is a strong acid.

In the case of phenol,

the phenoxide ion formed is stabilized by resonance.

[tex]C_6H_5OH -> C_6H_5O^- +H^+[/tex]

The resonance in phenoxide ion is shown below:

Whereas in the case of cyclohexanol resonance is not possible.

So, cyclohexanol is a weak acid compared to phenol.

Answer:

Fe2O3 is the formula this is your correct answer

Answer:

Malachite

Explanation:

Malachite is a copper carbonate hydroxide mineral, with the equation Cu2CO3(OH)2. This dark, green-joined mineral solidifies in the monoclinic precious stone framework, and frequently shapes botryoidal, sinewy, or stalagmitic masses, in cracks and profound, underground spaces, where the water table and aqueous liquids give the way to synthetic precipitation. So, the answer is malachite. Best of Luck!

Answer:

1.5x10²² particulates

Explanation:

Assuming ideal behaviour, we can solve this problem by using the PV=nRT formula, where:

We input the given data:

And solve for n:

Finally we calculate how many particulates are there in 0.025 moles, using Avogadro's number:

Answer:

40.0L of SO2 are produced

Explanation:

To solve this question we need to find the moles of O2 using PV = nRT in order to find the moles. Thus, we can find the limiting reactant and the moles (And volume) of SO2 produced as follows:

Moles O2:

n = PV/RT

n = 1.20atm*55.0L / 0.082atmL/molK*358K

n = 2.25 moles of O2.

Clearly, limiting reactant is O2.

The moles of SO2 produced are:

2.25 moles of O2 * (8mol SO2 / 11mol O2) = 1.6351 moles SO2

Volume SO2:

V = nRT/P

V = 1.6351 moles SO2*0.082atmL/molK*358K / 1.20atm

V = 40.0L of SO2 are produced

Answer: The pH of the resulting solution will be 3.001

Explanation:

Molarity is calculated by using the equation:

[tex]\text{Molarity}=\frac{\text{Moles}}{\text{Volume}}[/tex]          ......(1)

We are given:

Moles of NaOH = 0.0224 moles

Molarity of nitrous acid = 0.475 M

Molarity of sodium nitrite = 0.302 M

Volume of solution = 150 mL = 0.150 L          (Conversion factor: 1 L = 1000 mL)

Putting values in equation 1, we get:

[tex]\text{Moles of nitrous acid}=(0.475mol/L\times 0.150L)=0.07125mol[/tex]

[tex]\text{Moles of sodium nitrite}=(0.302mol/L\times 0.150L)=0.0453mol[/tex]

The chemical equation for the reaction of nitrous acid and NaOH follows:

                   [tex]HNO_2+NaOH\rightleftharpoons NaNO_2+H_2O[/tex]

I:                0.07125     0.0224     0.0453

C:             -0.0224     -0.0224   +0.0224

E:              0.04885         -          0.0677

The power of the acid dissociation constant is the negative logarithm of the acid dissociation constant. The equation used is:

[tex]pK_a=-\log K_a[/tex]        ......(2)

We know:

[tex]K_a[/tex] for nitrous acid = [tex]7.2\times 10^{-4}[/tex]

Using equation 2:

[tex]pK_a=-\log (7.2\times 10^{-4})=3.143[/tex]

To calculate the pH of the acidic buffer, the equation for Henderson-Hasselbalch is used:

[tex]pH=pK_a+ \log \frac{\text{[conjugate base]}}{\text{[acid]}}[/tex]         .......(3)

Given values:

[tex][NaNO_2]=\frac{0.0677}{0.150}[/tex]

[tex][HNO_2]=\frac{0.04885}{0.150}[/tex]

[tex]pK_a=3.143[/tex]

Putting values in equation 3. we get:

[tex]pH=3.143-\log \frac{(0.0677/0.150)}{(0.04885/0.150)}\\\\pH=3.143-0.142\\\\pH=3.001[/tex]

Hence, the pH of the resulting solution will be 3.001

Answer:

0.8853 mL

Explanation:

First we convert 13 lb to kg, keeping in mind that 1 lb = 0.454 kg:

Then we calculate how many mg of acetaminophen should be given, using the recommended dose and infant mass:

Finally we calculate the required mL of suspension, using its concentration:

Answer:

C - N Bond formation.

Explanation:

Imide synthesis is a chemical reaction in organic chemistry which consists of two acyl groups which bond to nitrogen atom. The compound structure is related to acid anhydrides. Imides are monoacyl which are used as valuable intermediates in organic synthesis.

Answer:

ee = 96%

Explanation:

Enantiomeric excess, ee, is a way to express a mixture that is not enantiomerically pure. It is defined as 100 times the ratio between the  differences of amounts of enantiomers and the total amunt. that is:

ee = |A-B|/ A+B * 100

ee = |98%-2%| / 98+2 * 100

Answer:

Examples. Glucose (C6H12O6), ribose (C5H10O5), Acetic acid (C2H4O2), and formaldehyde (CH2O) all have different molecular formulas but the same empirical formula: CH2O.

Explanation:In chemistry, the empirical formula of a chemical compound is the simplest positive integer ratio of atoms present in a compound.

Answer:

Please find the complete question in the attached file.

Explanation:

It would only be radioactive if the DNA molecule that employed the poly-T rand as templates. Its other molecule of the daughter would not have been radioactive as it did not need dATP for its replication. While each strand of the second molecule includes t, simultaneous reproduction dATP from both daughter molecules is needed so that each of those is radioactive.

Equilibrium shifts to the right.

OPTION A

Answer:

Explanation:

Both extraction and wash are technical materials separation processes. Both seek to carry out a separation of liquid-liquid, through the relationship between solvent and solute present in this solution. Both use a separation funnel and are very similar processes where the main difference is the purpose that each one seeks to exercise. The extraction causes the dissolution of the material that the researcher wants to leave behind. this process leaves impurities in the initial solution layer and moves the researcher's desired compound to the second layer of solution. A chemical reaction can take place during this process.

A wash, on the other hand, dissolves all impurities from the solution and extracts the compound desired by the researcher. Therefore, we can conclude that during this process the impurities are moved from one layer to another in the solution until it is discarded from the funnel, leaving the desired compound in the initial layer.

Answer:

it would be option C

Explanation:

Speed of light = 3×10^8m/s

Planck's constant = 6.626×10^-34 Js

Wavelength = 8 x 10^-9 m

Energy = [(3×10^8) * (6.626×10^-34)] / 8 x 10^-9

Energy = [19.878×10^(8-34)] / 8 x 10^-9

Energy = 2.48475 × 10^(-26+9)

Energy = 2.48×10^-17 J

Answer:

C₅H₈N₂O

Explanation:

The molecular formula denotes the various forms of atoms contained in a molecule at a particular fixed proportion.

The molecular ion M⁺ = 112.0499

and the exact mass values are given as follows:

C = 12.000

H = 1.0078

N = 14.003

O = 15.995

By assumption:

C = 12.000 × 5 = 60.0000

H = 1.0078 × 8 =    1.0078

N = 14.003 × 2 =  28.0060

O = 15.995 × 1 =   15.9950    

                        = 112.0634    

This is approximtely equal to 112.0499.

As such the Molecular formula for the compound = C₅H₈N₂O

Answer:

Explanation: hell noo

Answer:

Mass of sample in mg = 15,285 mg

Explanation:

Given:

Volume of urine sample = 15 ml

Density of sample = 1.019 g/ml

FInd:

Mass of sample in mg

Computation:

Mass = density x volume

Mass of sample in mg = Volume of urine sample x Density of sample

Mass of sample in mg = 1.019 x 15

Mass of sample in mg = 15.285 gram

Mass of sample in mg = 15.285 x 1,000

Mass of sample in mg = 15,285 mg

Answer:

skeletal system

Explanation:

to create and fliter blood and provide frame-work to the human body and support