Answer:
0.4 M
Explanation:
The process that takes place in an aqueous K₂HPO₄ solution is:
K₂HPO₄ → 2K⁺ + HPO₄⁻²First we calculate how many K₂HPO₄ moles are there in 200 mL of a 0.2 M solution:
200 mL * 0.2 M = 40 mmol K₂HPO₄Then we convert K₂HPO₄ moles into K⁺ moles, using the stoichiometric coefficients of the reaction above:
40 mmol K₂HPO₄ * [tex]\frac{2mmolK^+}{1mmolK_2HPO_4}[/tex] = 80 mmol K⁺Finally we divide the number of K⁺ moles by the volume, to calculate the molarity:
80 mmol K⁺ / 200 mL = 0.4 MA wave travels at 22 m/s and has a wavelength of 11 m. What is its frequency
The answer is 2Hz
To calculate frequency, divide the number of times the event occurs by the length of time.
How many mL of 0.100M Ca(OH) are needed to titrate 20.0mL of 0.300M H2SO4
Answer:
60.0 mL
Explanation:
Using CAVA = CBVB
CA = 0.300M
VA = 20.0 mL
CB = 0.100M
VB = ?
VB = CAVA
CB
VB = 0.300 * 20/ 0.100
VB = 60.0 mL
a freshwater stream flows into the ocean as shown in the diagram which statement correctly describes how the stream affects these salinity of the ocean
A- salinity increases because the stream adds salt to the ocean.
B- salinity decreases because the stream adds freshwater to the ocean
C- salinity increases because of stream adds freshwater to the ocean
D- salinity Remains the Same because the stream adds freshwater to the ocean
Like in a cat's eye, the human pupil changes shape in response to changes in
the environment. What is the most likely function of this structure?
A. To allow humans to read
B. To allow humans to see clearly in different levels of light
C. To allow humans to see shades in color
D. To allow humans to see at varying distances
Answer:
B.
Our pupils contract and expand depending on the amount of light at any given time in order to avoid being blinded and to see better in the darkness.
A coffee cup calorimeter will not be used to
directly measure the enthalpy of magnesium
combustion because
✓ the coffee cups could melt.
The calorimeter is made of coffee cups instead of
a beaker because coffee cups are
✓ better insulators
than beakers.
You will not measure the enthalpy of the reaction
of
✓ H2 and 02
in the coffee cup calorimeter because this reaction involves gases
Instead, you will use a well-known published
value.
These are the correct answers on edge 2021
Answer:
Ingles porfavor
Explanation:
The calorimeter is used to measure the heat of the system. The enthalpy of the combustion of magnesium cannot be measured by the calorimeter as it could melt the cup.
What is a coffee cup calorimeter?A coffee cup calorimeter is a styrofoam cup that contains partially filled water and is dipped with a thermometer. The reaction occurs in the water of the cup and hence differs from the bomb calorimeter.
The enthalpy of combustion is rigorous which can dissolve the polystyrene cup and hence is not used. They are better insulators than a beaker. The coffee cup calorimeter is not used to measure the enthalpy of hydrogen and oxygen as they involve gases that can escape the cup.
Learn more about coffee cup calorimeter here:
https://brainly.com/question/4390364
#SPJ2
How is water used in society
Answer:
Water can be used for direct and indirect purposes. Direct purposes include bathing, drinking, and cooking, while examples of indirect purposes are the use of water in processing wood to make paper and in producing steel for automobiles. The bulk of the world's water use is for agriculture, industry, and electricity.
Explanation:
Answer:
water is used for drinking, bathing, cooking, agriculture etc
A mixture of NO2 and N2O4 gas is at equilibrium in a closed container. These gases react with the equation 2NO2 ⇌ N2O4. What will happen if the size of the container is increased?
Answer:
Equilibrium will shift leftwards towards NO2.
Explanation:
Hello there!
In this case, according to the Le Cha telier's principle, it is possible to realize that the increase of the volume turns out in the shift towards the most of the gaseous moles are in; in such a way, for the given chemical reaction, we can notice how NO2 (reactant side) has the most of the moles (2 moles in comparison to 1 mole of N2O4); and therefore, by increasing the volume, the equilibrium will shift to it, it means leftwards.
Best regards!
If aqueous solutions of Ba(OH)2 and HNO3 are mixed, what products are formed? Select one: a. BaN2(s) + H2O(l) b. Ba(NO3)2(aq) + H2O(l) c. Ba(s) + H2(g) + NO2(g) d. Ba2O(s) + NO2(g) + H2O(l) e. Ba3N2(s) + H2O(l)
Answer: Ba(NO3)2(aq) + H2O(l)
Explanation:
3.
The color of the powdered form of a mineral is called
O fracture
O cleavage
O luster
O streak
Answer:
D. Streak.
Explanation:
A mineral, in simple terms, can be defined as a solid inorganic substance that occurs in a pure form with a specific crystal structure. A mineral is identified based on its physical properties which include luster, color, streak, crystal shape, etc.
The color of the powdered form of a mineral is called a streak. A streak is a useful property in distinguishing sulfide and oxide minerals. To check the color of a mineral, it is rubbed against the surface of a ceramic streak plate or a piece of unglazed ceramic. In its finely powdered form, a mineral is easy to identify.
Therefore, option D is correct.
What is the molar mass of AlCl3
Answer:
133.34 g/moles
Explanation:
but to make life easy it could be 133.4 g/ moles as well
Why are half-reactions used in redox reactions?
Answer:
Because a redox reaction holds for both oxidation and reduction.
One half equation is of oxidation and the other is of reduction.
When these two half equations are combined, we get an overall equation of the redox reaction.
What would
happen to the
vultures if the
gazelle
decreased?
Answer: If the gazelle population starts to decrease this could lead to some vultures not having enough food to eat
Explanation: This explains the obvious outcome of what would happen.
Hope you do well with what your doing :)
Mark as Brainliest please :)
There is a bottle of KCl solution: the volume is 35 mL; its molarity is 3.0 M.
After diluting it into final volume 200 mL, what is the molarity (in M) now?
Answer:
0.525 M
Explanation:
As the problem deals with a dilution process, we can use the following formula:
C₁V₁=C₂V₂Where subscript 1 stands for initial concentration and volume, while 2 stands for the final conditions. Meaning that in this case:
C₁ = 3.0 MV₁ = 35 mLC₂ = ?V₂ = 200 mLWe input the data given by the problem:
3.0 M * 35 mL = C₂ * 200 mLAnd solve for C₂:
C₂ = 0.525 Mexplain what is ment by solvent front
Answer:
In paper chromatography, the wet moving edge of the solvent that progresses along the surface where the separation of the mixture is occurring.
Explanation:
I hope this helps and pls mark me brainliest :)
In the process of photosynthesis, sunlight is converted into
Answer:
Chemical energy
Explanation:
By the use of electrons and protons from water
Answer:
chemical energy
Explanation:
Photosynthesis is the process by which organisms that contain the pigment chlorophyll convert light energy into chemical energy which can be stored in the molecular bonds of organic molecules (e.g., sugars). Photosynthesis powers almost all trophic chains and food webs on the Earth.
What transition energy corresponds to an absorption line at 502 nm?
A. 4.56 x 10-19
B. 1.76 10-19
C. 2.53 x 10-19
D. 3.96 10-19 J
Answer:
D 3.96 10-19J
Explanation:
I took the test
Put the steps of the carbon cycle in order using Step 1 as your starting point.
Step 1: Bacteria, through nitrogen fixation and nitrification, convert nitrogen into a usable form.
The animal dies and decomposes, returning nitrogen back to the soil.
Once nitrogen is in usable form, it is taken up by plants and assimilated into proteins..
An animal eats a plant and the nitrogen becomes part of the animal’s proteins.
Answer:
Carbon moves from the atmosphere to plants. ...
Carbon moves from plants to animals. ...
Carbon moves from plants and animals to soils. ...
Carbon moves from living things to the atmosphere. ...
Carbon moves from fossil fuels to the atmosphere when fuels are burned. ...
Carbon moves from the atmosphere to the oceans.
Explanation:
Answer:
step 4 , 2 , 3
Explanation:
What is the energy of an electron in a Li+ ion when an electron moves from n = 2 to n =3?
7. Which of the following is a proof that light travels in a straight line?
A. Formation of clouds
C. Formation of rainbows
B. Formation of colors
D. Formation of shadow
Answer:
formation of shadow is right
Answer:
correct answer is D
Explanation:
When you see a shadow, it is directly behind the object.
Iodine shines like metals but is not metal what is its basis
Answer:
Iodine is a non-metal, but it is lustrous (lustrous is the property of metal) in nature.
Ali says the climate of a town is rainy because it is raining outside today. Is she correct? In one or two sentences, explain why Ali is or is not correct about the climate of the town.
Answer:
Ali is incorrect.
Explanation:
Ali is wrong because the climate is a study of the weather pattern over a long period of time. You cannot look outside one day and determine the climate because the climate is long-term.
She could say the weather is rainy, because that is short term, but not the climate.
Q3: Match the column A with Column B and write answer in Column C
Answer:
ok
Explanation:
1d
2c
3b
4a
Psychology is the study of the human brain. A psychoanalyst is a person who
analyzes people's minds. What does the prefix psycho-mean?
A. Related to the brain
B. Related to studying
C. Related to science
D. Related to analysis
Explain in detail how low density polyethylene is made
Answer:
Low-density polyethylene is manufactured by the process of the polymerization of ethylene at very high temperatures in a tubular reactor. In this tubular reactor, high-pressure polymerization allows further copolymerization of ethylene with polar co-monomers. The tubular process has an advantage over autoclave process.
Explanation:
please mark brainliest
24. A wave has a speed of 50 m/sec. If its frequency is 100 Hz,
what is its wavelength?
Answer:
I guess
Wave speed= Frequency x Wavelength
-> Wavelength= Wave speed divide Frequency
-> 50m/s divide 100Hz= 0.5m
I hope it help! :)
3.88g of NaOH is required to neutralize a spill of hydrochloric acid. A 0.516M solution of NaOH is available for use.
A. Determine the number of moles needed to complete the reaction.
B. What volume of NaOH solution is needed for this reaction?
C. What volume of a stock 1,15M solution would be used to make the solution used in the reaction?
Answer:
ftb
Explanation:
A buffer solution is 0.439 M in CH3COOH and 0.311 M in CH3COONa . If K_a for CH2COOH is 1.8x10^-5, what is the pH of this
buffer solution?
Please no link answers!
Answer:
whats CH3COOH please tell me so I can answer!
How are cells organized?
A: Organs
B: Organelles
C: Tissues
Answer:
tissues,organs, organelles
One gallon of gasoline (C8H18) weights about 6.3 pounds. Burning gasoline with excess of oxygen forms water and carbon dioxide. When 3.1 gallons of gasoline burn, how many pounds of CO2 emit into the air?
FW: C = 12; H = 1; O = 16.
Answer:
60 pounds of CO₂ are emited into the air
Explanation:
The combustion of gasoline occurs as follows:
C₈H₁₈(l) + 25/2O₂(g) ⇄ 8CO₂(g) + 9H₂O
Where 1 mole of gasoline produce 8 moles of CO₂
To solve this question we must find the moles of gasoline in 3.1 gallons. 8 times these moles are the moles of CO₂ produced. With the moles of CO₂ we can find its pounds as follows:
Pounds gasoline:
3.1 gallons * (6.3 pounds / gallon) = 19.53 pounds
Grams gasoline:
19.53 pounds * (453.592g / pound) = 8859g
Moles gasoline -Molar mass C8H18: 114.23g/mol-
8859g * (1mol / 114.23g) = 77.55 moles gasoline
Moles CO₂:
77.55 moles gasoline * (8 mol CO₂ / mol Gasoline) = 620.4 moles CO₂
Mass CO₂ - Molar mass: 44.01g/mol-
620.4 moles CO₂ * (44.01g / mol) = 27304g CO₂
Pounds CO₂:
27304g CO₂ * (1lb / 453.592g) =
60 pounds of CO₂ are emited into the airPlease Need help asap
For Al, its atomic number is 13 and its mass number is 27. How many neutrons does it have?
А. 13
B. 14
C. 26
D. 27
E. 40
Answer:
A
Explanation:
The number of protons and neutrons of an element is the same. the electrons are the only thing that can differ. The atomic number equal the protons and neutrons.
