What is the name of this compound? H single bonded to N with a pair of electron dots above and a single bond to H below, single bonded to the right to C with H above and below, and another C with H above, below, and right.

Answers

Answer 1

Answer:

Ethanamine (also known as ethylamine)

Explanation:

The compound that is requested by the question is ethanamine. Its trivial name is ethylamine.

It is a compound that contained the ethyl moiety (CH3CH2-) as well as the amine moiety (-NH2).

Ethanamine has a structure that can easily be determined by the statements in the question.

The structure of ethanamine is shown in the image attached.

What Is The Name Of This Compound? H Single Bonded To N With A Pair Of Electron Dots Above And A Single
Answer 2

Answer:

What is the name of this compound?

                                                                                    H       H

                                                                                    │       │

                                                               H ── N ── C ── C ── H

                                                                          │       │        │

                                                                          H      H        H

❌ A) ethanal

✔️B) ethylamine

❌ C) ethanoic acid

❌ D) methyl ethanoate

I Took Question Test And Have Day.


Related Questions

calculate the atomic number of an element whose neutral atom has four electrons in its valence shell and its valence shell is the m shell​

Answers

Answer:

The atomic number of the atom is 14.

Explanation:

The following data were obtained from the question:

Valence electrons = 4

Atomic number =.?

From the question given, we were told that the valence electron is in the m shell. Thus, we can say:

M shell = 4 electrons

The number of shells of the atom can be written in the order K, L, M with M as the last shell because we were told that the valence electrons i.e electrons in the outer shell is located at the M shell.

From a detailed knowledge of atom,

K shell = 1st shell

L shell = 2nd shell

M shell = 3rd shell

The first shell, K of an atom can only accommodate 2 electrons while others can accommodate a maximum of 8 electrons.

Note: we can only put electrons in another shell if a shell is already having 8 electrons. This rule only applies to the 2nd shell and above.

Thus, the atom in question has the following electrons:

K shell = 1st shell = 2 electrons

L shell = 2nd shell = 8 electrons

M shell = 3rd shell = 4 electrons

To get the atomic number of the atoms, we simply add all the electrons together.

This is illustrated below:

Atomic number = 2 + 8 + 4

Atomic number = 14

Therefore, the atomic number of the atom is 14.

Answer:

The answer on Edge is,

C. the number of valence electrons an atom has

am gonna cry plz answer Which is not an inter molecular force? Select one: a. Inter atomic bonds b. van der waals forces c. hydrogen bonds

Answers

Answer:

inter atomic bonds

Explanation:

because it is loosely held

what is non lustrous ?

Answers

Answer:

materials which do not show the quality of lustre i.e. shiney surface

for eg- non metals except Iodine

Explanation:

hope it helps u plz mark as the brainliest

Answer:

These are materials that don't have lustre

Explanation:

They are not shiny.

They include non-metals but not iodine.

Hope it helps.

What is the formula of the ion hydrogen sulfite, which has a charge of -1

Answers

H2S^-1

the 2 is small below
-1 is small above

im sorry due to my typing error

There are two types of ions in chemistry, one is cation and the other is anion. Anion is the negative charge ion. Therefore, the formula of hydrogen sulfite ion is HSO₃⁻

What is chemical Compound?

Chemical Compound is a combination of ions, ions forms by combination of element and element forms by combination of atoms in fixed proportion.

According to our question the chemical compound from which hydrogen sulfite ion is coming is sulfurous acid that is H₂SO₃. So to get hydrogen sulfite ion we need to remove one hydrogen ion that is H⁺ from the chemical compound sulfurous acid.

The balanced reaction is

H₂SO₃[tex]\rightarrow[/tex]H⁺ + HSO₃⁻

From above reaction we can see that the charge over hydrogen sulfite ion is -1

Therefore the formula of hydrogen sulfite is HSO3-

To learn more about chemical compound, here:

https://brainly.com/question/26487468

#SPJ6

Which statement best describes a compound formed by an ionic bond?

A) negatively charged
B) neutral
C) contains multiple charges
D) positively charged​

Answers

Answer is D

Explanation:

Answer:

B. Neutral

Explanation:

When there is a ionic bond,  one element steals or takes away an electron from the other element.

An example is NaCl

In this compound, Chlorine atom steals an extra electron from Sodium to fill its outer shell. So, this is a Ionic bond. Since, the Sodium compound gives away an atom, it is positively charged. Since, Chlorine steals an atom, it is negatively charged. Opposite charges attract, so they become a compound.

When positive and negative mix, it becomes neutral.

An event planner accidentally leaves a tray of cupcakes in his car for several hours on a sunny day. When he returns, the formerly firm frosting is now runny and wet to the touch. Which answer choice best describes what happened in this scenario? The particles of frosting released energy to their surroundings and changed from the solid to the liquid state. The particles of frosting released energy to their surroundings and changed from the liquid to the solid state. The particles of frosting absorbed energy from their surroundings and changed from the solid to the liquid state. The particles of frosting absorbed energy from their surroundings and changed from the liquid to the solid state.

Answers

Answer:

The particles of frosting absorbed energy from their surroundings and changed from the solid to the liquid state.

Explanation:

On a sunny day, the energy of the particles in the surrounding is higher than the energy of the frosting tray of cupcakes.

As a result of the exchange of energy between the tray of cupcakes and the surrounding, the tray of cupcakes absorbs energy from the surrounding. When this occurs, the firm frosting is now converted from solid to liquid which is runny and wet to touch, hence the answer above.

fill in the blanks with the words given below-
[Atoms, homogeneous, metals, true, saturated, homogeneous, colloidal, compounds, lustrous]
1.An element which are sonorous are called................
2.An element is made up of only one kind of ....................
3.Alloys are ............................. mixtures.
4.Elements chemically combines in fixed proportion to form ........................
5. Metals are................................... and can be polished.
6. a solution in which no more solute can be dissolved is called a .................... solution.
7. Milk is a .............. solution but vinegar is a .................. solution.
8. A solution is a ................... mixture.

pls help, could not get these answers

Answers

Answer:

1. Metal.

2. Atom.

3. Homogeneous

4. Compounds.

5. Lustrous

6. Saturated.

7. Colloidal; true.

8. Homogeneous.

Explanation:

1. An element which are sonorous are called metal.

2. An element is made up of only one kind of atom.

3. Alloys are homogeneous mixtures.

4. Elements chemically combines in fixed proportion to form compounds.

5. Metals are lustrous and can be polished.

6. A solution in which no more solute can be dissolved is called a saturated solution.

7. Milk is a colloidal solution but vinegar is a true solution.

8. A solution is a homogeneous mixture.

0.024 is how many significant figures?

Answers

Answer:

24×10^-3

Explanation:

[tex]Move \: the\:decimal \:point\:,\\3 \:times\:to\:the \:right = 24\\\\When \:the\:decimal\:point \: moves\\\:to\:the \:right\:it\:becomes\:a \:negative\:power\\\\0.024= 24 \times 10^-^3[/tex]

how will you measure the length of a curved line by using a thread? ​

Answers

A curved line or surface cannot be measured by a straight scale, a measuring tape or thread must be used instead.To measure a curved line using a thread, follow the below steps:

Tie a knot at one end of the thread.
Place the thread at the beginning of the line and try to measure a small initial portion of the line which is relatively straight.
Place your thumb at the other end of the measured portion and measure next straighter portion.
Repeat the above step till the end of line is reached. Make a knot at the end of the line.
Now, straighten the thread and measure the length of the two knots on a scale.

Which of the following is not equal to 485 L?


0.485 kL
4.85 x 104 mL
48,500 cL
4.85 x 108 µL

Answers

Answer:

[tex]4.85 * 10^4\ mL[/tex]

Explanation:

Given

485 L

Required

Determine the measurement not equal to 485L

[tex]0.485\ kL[/tex]

From standard unit of conversion;

1 KL = 1000 L

Multiply both sides by 485

[tex]485 * 1 KL = 485 * 1000 L[/tex]

[tex]485KL = 485000L[/tex]

Divide both sides by 1000

[tex]\frac{485KL}{1000} = \frac{485000L}{1000}[/tex]

[tex]0.485KL = 485L[/tex]  ---- This is equivalent

---------------------------------------------------------------------------------------------

[tex]4.85 * 10^4\ mL[/tex]

From standard unit of conversion;

1000 mL = 1 L

Multiply both sides by 485

[tex]485 * 1000 mL = 1 L * 485[/tex]

[tex]485000\ mL = 485\ L[/tex]

Convert to standard form

[tex]4.85 * 10^5\ mL = 485\ L[/tex]

Hence; [tex]4.85 * 10^4\ mL[/tex] is not equivalent to 485L

---------------------------------------------------------------------------------------------

[tex]48500 \ cL[/tex]

From standard unit of conversion;

100 cL = 1 L

Multiply both sides by 485

[tex]485 * 100 cL = 1 L * 485[/tex]

[tex]48500\ cL = 485\ L[/tex]

Convert to standard form

[tex]4.85 * 10^4\ cL = 485\ L[/tex] ---- This is equivalent

---------------------------------------------------------------------------------------------

[tex]4.85 * 10^8 \[/tex] μL

From standard unit of conversion;

1000000 μL = 1 L

Multiply both sides by 485

[tex]485 * 1000000uL = 1 L * 485[/tex]

[tex]485000000uL = 485\ L[/tex]

Convert to standard form

[tex]4.85 * 10^8\ uL = 485\ L[/tex] ---- This is equivalent

From the list of given options;

[tex]4.85 * 10^4\ mL[/tex] is not equivalent to 485L

Can a window pane be considered a mineral?

Answers

Answer:

Explanation:

The glass (which does not crystallize even though it is accepted) of a window is NOT a mineral, since it is neither a substance of natural origin (although it is manufactured from natural components) nor does it have a defined crystalline structure, that is, the atoms they are not arranged in an orderly and regular way along axes and planes forming flat faces that keep a symmetry.

Remember that a mineral is defined as a solid, inorganic, homogeneous substance, of natural origin, with a crystalline structure and a determined and well-defined chemical composition within narrow margins and that has regular and characteristic physical properties.

Explanation: No, glass is not a mineral. ... Definable chemical composition: SiO2 *Actually, most industrially-produced glass is not pure silica, but having impurities is still a definable chemical composition so this part of the definition is ok. Orderly arrangement of atoms in a lattice: NO.

Se someten a combustion 0,452g de un compuesto de C,H y N de masa molecular 80. Al recoger el CO2 y el H2O producidas obtenemos 0,994 g y 0,203 respectivamente. Determine formula empirica y formula molecular

Answers

Answer:

Fórmula empírica: C₂H₂N

Fórmula molecular: C₄H₄N₂

Explanation:

Un compuesto que contiene carbono hidrógeno y nitrógeno con fórmula CₐHₓNₙ es sometido a combustion produciendo:

CₐHₓNₙ + O₂ → aCO₂ + x/2 H₂O + nNO₂

Con la masa de dióxido de carbono y agua podemos encontrar las moles de carbono e hidrógeno y su aporte a los 0.452g de muestra que fueron puestos en combustión, así:

Moles C:

Moles C = Moles CO₂ = 0.994g CO₂ ₓ (1mol / 44g) = 0.0226 moles C

Masa C: 0.0226 moles C ₓ (12.01g / mol) = 0.271g Carbono hay en la muestra

Moles H:

Moles H = 2 Moles H₂O = 0.203g H₂O ₓ (1mol / 18g) = 0.0113 moles H₂O = 0.0226 moles H

Masa H: 0.0226 moles H ₓ (1.01g / mol) = 0.023g Hidrógeno hay en la muestra

Así, la masa de nitrógeno en la muestra y sus moles son:

Masa N = 0.452g - 0.271g C - 0.023g H

Masa N = 0.158g Nitrógeno

Y su moles son:

0.158g ₓ (1 mol / 14.01g) = 0.0113 moles N

Con las moles de C, H y N podemos determinar la formula empírica que se define como: "La relación de números enteros más simple entre la cantidad de átomos presentes en una mólecula. Si usamos como base las moles de nitrógeno (Valor menor):

Relación H/N: 0.0226 mol / 0.0113 mol = 2

Relación C/N: 0.0226 mol / 0.0113 mol = 2

Relación N/N: 0.0113 mol / 0.0113 mol = 1

Así, la fórmula empírica es:

C₂H₂N

Esta fórmula empírica tiene una masa molar de:

2C = 2*12 g/mol = 24g/mol

2H = 2*1g/mol = 2g/mol

N = 14g/mol

24+14+2 = 40g/mol

Como la masa molecular del compuesto es 80g/mol (Dos veces la de la fórmula empírica, la fórmula molecular es 2 veces la fórmula empírica:

C₄H₄N₂

Consider the following: Li(s) + ½ I₂(g) --> LiI(s) ΔH = –292 kJ. LiI(s) has a lattice energy of –753 kJ/mol. The ionization energy of Li(g) is 520 kJ/mol, the bond energy of I₂(g) is 151 kJ/mol, and the electron affinity of I(g) is –295 kJ/mol. Use these data to determine the heat of sublimation of Li(s).

Answers

Answer:

Heat of sublimation of Li(s) = 160.5 kJ/mol

Explanation:

Given that:

[tex]\mathtt{2Li(s) + \dfrac{1}{2} I_2(g) \to 2LiI(s)}[/tex]

ΔH = –292 kJ

The heat of formation for the above reaction =  –292 kJ × 2 =  -584 kJ/mol

[tex]\mathtt{Li^+_{(g)} + I^-_{(g)} \to LiI_{(s)}}[/tex]

The lattice energy of LiI(s) = -753 kJ/mol

[tex]\mathtt{Li(g)\to Li^+(g) + e^- }[/tex]

The ionization energy of LiI(s) = +520 kJ/mol

[tex]\mathtt{I_2_{(g)} \to 2I_{(g)} }[/tex]

The Bond Energy of I₂(g) = 151 kJ/mol

[tex]\mathtt{I_{(g)} + e^- \to I^-_{(g)}}[/tex]

The electron affinity of I(g) = -295 kJ/mol

Heat of sublimation: Sublimation is the process of changing of a solid matter into gas without passing through the liquid stage, Now, the molar heat of sublimation is the amount of energy that must be added to a mole of solid  to turn it directly into a gas without any interference through the liquid phase provided the pressure is  constant.

From  the above reactions: The heat of sublimation  of Li(s) can be calculated by the sum total of the following.

[tex]\mathtt{Li_{(s)} + \dfrac{1}{2} I_2_{(g)} \to LiI_{(s)} \ \ -292 kJ/mol} \\ \\\mathtt{I_{(g)} \to \dfrac{1}{2} I2(g) \ \ -75.5 kJ/mol} \\ \\ \mathtt{I^-(g) \to I(g) + e^- \ \ +295 kJ/mol} \\ \\ \mathtt{LiI(s) \to Li^+_{(g)} + I^-_{(g)} \ \ +753 kJ/mol} \\ \\ \mathtt{Li^+_{(g)} + e^- \to Li(s) \ \ -520 kJ/mol} \\ \\[/tex]

[tex]\mathtt{Li(s) \to Li(g)}[/tex] = (-292 +(-75.5)+295+753+(-520)) kJ/mol

[tex]\mathtt{Li(s) \to Li(g)}[/tex] =  160.5 kJ/mol

Heat of sublimation of Li(s) = 160.5 kJ/mol

the overall take away of an experiment’s results is the______. A. hypothesis B. introduction C. conclusion

Answers

Answer:

conclusion

Explanation:

it can't be a hypothesis since tests are carried out to verify so it is not a theory

an introduction to an experiment only gives the basis of what we are investigating therefore nothing has been proven and the question is still unanswered

The overall takeaway of an experiment’s results is the conclusion. Hence, option C is correct.

What is a hypothesis?

A hypothesis is a testable statement about the relationship between two or more variables or a proposed explanation for some observed experiment.

The overall takeaway of an experiment’s results can't be a hypothesis since tests are carried out to verify so it is not a theory

An experiment only gives an idea about the investigation therefore nothing has been proven and the question is still unanswered.

Hence, the overall takeaway of an experiment’s results is the conclusion.

Learn more about the hypothesis here:

brainly.com/question/5177511

#SPJ5

what is a disavanege for renewable solor power

Answers

1. Cost (fairly high).
2. Weather Dependent.
3. Solar Energy Storage Is Expensive.
4. Uses a Lot of Space.
5. Associated with Pollution.

pls balance the following chemical equation asap; Ca(OH)2 +CO2 = CaCO3+ H2O​ pls make it step by step

Answers

Answer:

Explanation:

Start by writing water as HOH

Ca(OH)2 +CO2 = CaCO3+ HOH

Next pay attention to the CO2 going to CO3

We need an oxygen.

Fortunately that is provided by the (OH)2

Now we have

Ca(OH)2 + CO2 ==> CaCO3 + HOH

and believe it or not, that is balanced as it is

The left side has 1 Ca. So does the right side

The Left side has 1 C.  So does the right side.

The left side has 2 H. So does the right side

The left side has 2 oxygens (in Ca(OH2)) + 2 oxygens in CO2

So the equation is balanced.

what is an example of mechanical energy converting to heat energy?

Answers

Answer:

Rubbing your hands together converts mechanical energy to thermal energy. Turning on a light switch converts mechanical energy to electrical and radiant energy.

D. Answer these questions.
1. What is chemistry?
2. What is scientific method? ​

Answers

Answer:

1.Chemistry is the scientific discipline involved with elements and compounds composed of atoms, molecules and ions: their composition, structure, properties, behavior and the changes they undergo during a reaction with other substances.

2.The scientific method is an empirical method of acquiring knowledge that has characterized the development of science since at least the 17th century. It involves careful observation, applying rigorous skepticism about what is observed, given that cognitive assumptions can distort how one interprets the observations.

Which correctly describe a reversible reaction reaching equilibrium in a closed system?

Select two that apply.


-Over time, the rates of the forward and reverse reactions equalize.

-Over time, the rate of the forward reaction becomes zero.

-Initially, the concentration of reactants is low, so the rate of the forward reaction is also low.

-Initially, the concentration of products is low, so the rate of the reverse reaction is also low.

-Over time, the rate of the reverse reaction becomes greater than the forward reaction.

Answers

Answer:

-Over time, the rates of the forward and reverse reactions equalize.

-Initially, the concentration of products is low, so the rate of the reverse reaction is also low.

Explanation:

A chemical reaction is said to be reversible when the reactants forms the products, which in turn reacts together again to give rise to the reactants. In a reversible reaction, the formation of products from reactants occurs simultaneously with the reformation of the reactants from the products. For example:

The reversible reaction: A + B ⇆ C + D means;

A + B → C + D and C + D → A + B

The rate at which both forward and reverse reactions are taking place in closed system may be initially different but with time, it gets equal to form an equilibrium reaction. However, at first, only the rate of the forward reaction proceeds because the concentration of the product is low. Hence, the rate of reaction of the reverse reaction (product to reactants) is low as well.

In the reversible reaction above, the rate of the reverse reaction (C + D → A + B) will turn out low initially because the concentration of the products (C and D) are low. With time, the rates of the forward and reverse reaction becomes equal to form an EQUILIBRIUM or STABLE reaction.

One to two paragraphs describing the water cycle​

Answers

Answer:

The water cycle or hydrologic is a continuous cycle where water evaporates, travels into the air and becomes part of a cloud, falls down to earth as precipitation, and then evaporates again. This repeats again and again in a never-ending cycle. Water keeps moving and changing from a solid to a liquid to a gas, over and over again.

Precipitation creates runoff that travels over the ground surface and helps to fill lakes and rivers. It also percolates or moves downward through openings in the soil to replenish aquifers under the ground. Some places receive more precipitation than others do. These areas are usually close to oceans or large bodies of water that allow more water to evaporate and form clouds. Other areas receive less precipitation. Often these areas are far from water or near mountains. As clouds move up and over mountains, the water vapor condenses to form precipitation and freezes. Snow falls on the peaks.

The continual movement of water on, above, and below the Earth's surface is referred to as the water cycle, also known as the hydrological cycle.

What is water cycle ?

The water cycle demonstrates how water is constantly moving both inside the Earth and in the atmosphere. It is a complicated system with a wide range of processes.

Water vapor is created when liquid water evaporates, and this water vapor then condenses to form clouds and falls back to earth as rain and snow.

The constant flow of water between the ground and the atmosphere is known as the water cycle. Water travels to land as precipitation, like snow and rain.

The cycle is then completed by the water evaporating, condensing into clouds in the atmosphere, and precipitating once more on earth. The water cycle is composed mostly of four processes: evaporation, convection, precipitation, and collection.

Thus, The continual movement of water on, above, and below the Earth's surface is referred to as the water cycle.

To learn more about the water cycle, follow the link;

https://brainly.com/question/1151425

#SPJ2

oxidation number of Fe in Fe2(CO3)2

Answers

Answer:

+2

Explanation:

Oxidation number of an element, also called its oxidation state, is the number of electrons its atoms lost or gain in the process of forming a chemical compound.

To determine the oxidation state of an element or compound;

- The sum of all the oxidation numbers in a neutral compound must equal zero (0).

In the compound: Fe2(CO3)2

This compound is a neutral one, hence, its oxidation state is equal to zero (0).

It contains a polyatomic ion (carbonate ion) i.e. CO3 2-, whose net charge is -2.

Hence, to find the oxidation number of Iron (Fe), which is represented by X, in the compound, we say;

X(2) + -2(2) = 0

2X + -4 = 0

2X - 4 = 0

2X = 4

X = +2

Therefore, the oxidation number of Fe in Fe2(CO3)2 is (+2)

The compound Fe2(CO3)2 is called Iron (II) carbonate

Oxidation number of Fe in [tex]\rm Fe_2(CO_3)_2[/tex] is 2. An atom's oxidation number is a positive or negative number.

A notion used in chemistry to characterise the relative electron distribution and the level of oxidation or reduction of atoms in a compound or ion is known as the "oxidation number," sometimes known as the "oxidation state." Based on the presumption that electrons in chemical bonds are entirely transmitted to the more electronegative atom, it is a method of bookkeeping that assigns a notional charge to each individual atom in a molecule or ion.

The -4 stands for the overall charge that the carbonate ions provided, and the x is the Fe's oxidation number.

2x + (-4) = 0

2x - 4 = 0

2x = 4

x = 4/2

x = 2

To know more about oxidation number, here:

https://brainly.com/question/29100691

#SPJ6

How many protons does an atom of zinc contain?
It contains an amount

Answers

a single neutral atom of zinc has 30 protons

An atom of nitrogen has seven electrons. Which diagram correctly represents the arrangement of these electrons?
ОА.
OB
1112
1s 11:28 1111
2p
1s 12
2p
1s 12
12s 2p
OD. 1111s 112s
112p
Ос.

Answers

Answer:

Option C.

Explanation:

The arrangement of electrons in their orbital follows certain rules.

The Hund's rule practically explained how electrons are distributed in their orbitals.

The Hund's rule states that electrons distributed among the orbitals of the same shell singly (without partner) before pairing occurs.

In the filling of these electrons in their orbitals, we fill in the electron without pairing first because electrons tends to repel each other before filling with the opposite spin as shown in the attached photo.

Answer it answer it answer it

Answers

Answer:

[tex]\Large \boxed{\mathrm{A}}[/tex]

Explanation:

Rust formed from iron and oxygen combining is a chemical change, because in a chemical change, the resulting substance(s) will have different properties from the substance(s) before the chemical change.

I cant comment... So is it Right?

A mixture of reactants and products for the reaction shown below is at

equilibrium in a 2.0 L container. What would most likely happen to the

equilibrium if the volume of the container were increased to 4.0 L?

N.(g) + 3H2(g)

22NH3(g)

Answers

Answer:

The system will shift to the left producing more moles of gases trying to maintain the original pressure of the system

Explanation:

Based on LeChatelier's principle, a change in temperature, pressure, volume or concentration on a system result in an opposing change trying to maintain the initial equilibrium conditions.

In the reaction:

N₂(g) + 3H₂(g) ⇄ 2NH₃(g)

4 moles of gas reacts producing 2 moles of gas.

In a gas reaction, the system will try to maintain the total pressure.

If the volume of the container increases, the system will shift to the side of the reaction that has more moles of gases in order to maintain the pressure.

That means if in the reaction the volume of the container increase from 2.0L to 4.0L the system will shift to the left producing more moles of gases trying to maintain the original pressure of the system.

When might Accurate length measurement be important?​

Answers

Answer:

When you are going to measure small lengths or objects or when you are going to measure things with great accuracy.

Explanation:

List down the observations made by Rutherford during the gold foil experiment.

Answers

Answer:

1) The volume occupied by an atom is composed of mainly empty space

2) Atoms have a very small, relatively dense, central nucleus that is positively charged

3) The region around the nucleus of an atom are orbited by negatively charged electrons in a the same fashion planets orbit around the Sun.

Explanation:

The selection of gold for the gold foil experiment was due to its ability to be rolled into extremely thin sheets such that it was expected for alpha particle to perforate or pass through the foil.

A gas has a volume of 25.0 mL at 2.50 atm. What is the volume at 457 mmHg if the temperature remains constant?

Answers

Answer:

≈ 0.104 liters  

Explanation:

We can use Boyle's Law: [tex]P_{1}V_{1} = P_{2}V_{2}[/tex]

P₁ = 2.50 atm

V₁ = 25.0 mL

P₂ = 457 mmHg

V₂ = ?

Because pressure should be in atm we will convert 457 mmHg to units in atm:

1 atm = 760mmHg so we can divide 457 by 760 and we get ≈ 0.601atm

Next we can plug in the units to the equation for Boyle's Law:

(2.50)(25.0) = (0.601)(V₂)

Solve for V₂

V₂ will give you ≈ 104mL or 0.104L

Either is correct depending on which unit they are asking you to use

which statement is true about this reaction 14/7n + 1/1h ------> 15/8o
A. it is a practical source of energy on earth
B.it occurs only outside the solar system
C.its product is heavier than each of its reactants
D.it shows the critical mass of an element

Answers

Answer: answer is C

Explanation:

Its product is heavier than each of its reactants is true about this ₇N¹⁴ + ₁H¹ →  ₈O¹⁵ reaction

What is Nuclear reaction ?

A nuclear reaction is a reaction in which one or more than one nuclides are generate and it collides between two atomic nuclei or one atomic nucleus.

The reaction is  

₇N¹⁴ + ₁H¹ →  ₈O¹⁵

Now equating the mass number of both sides

14 + 1 = 15 + a

a = 0

Equating atomic number of both sides

7 + 1 = 8 + x

x = 0

Thus, we can say that its product is heavier than each of its reactants is true about this reaction

Hence, option C is correct answer.

Learn more about Nuclear reaction here: https://brainly.com/question/25387647
#SPJ2

WILL GIVE BRAINLIEST, Which of the following would have the greatest amount of surface area?
A. 1 cubic foot of watermelons
B. 1 cubic foot of matchbox cars
C. 1 cubic foot of loose sand
D. A 1 cubic foot block of concrete

Answers

Answer:

C. 1 cubic foot of loose sand

Explanation:

For many  objects having equal volume , surface area will be maximum

of the object which has spherical shape .

But when a sphere is broken into tiny small spheres , total surface area of all the small spheres will be more than surface area of big sphere .

Hence among the given option , surface area of loose sand will have greatest surface area . Loose sand is equivalent to small spheres .

Answer:

the answer would be C 1 cubic foot of loose sand.

Other Questions
A survey of 500 randomly selected adults found that 57% say that they would take a ride in a fully self-driving car. The 95% confidence interval for the true proportion of all adults who would take a ride in a full self-driving car is found to be (0.5266, 0.6134). Can we conclude that the majority of all adults would take a ride in a fully self-driving car? Yes; Since the confidence interval limits are both greater than 50%, we can reasonably conclude that more than half of all adults would take a ride in a fully self-driving car. No; The data does not include all adults, so we cannot make a conclusion about the population. No; The confidence interval limits are not large enough to determine that a majority rely only on cellular phones. The proportion would need to be much greater than 50%, and the one above is only slightly larger. Yes; Since the proportion of adults who said yes is 57%, and this is higher than 50%, we can conclude that a majority would take a ride in a fully self-driving car. Select the correct answer.What was the primary purpose of Southern implementation of Black Codes?A.to authorize the use of force to implement the Thirteenth AmendmentB.to create standard alphabet and language for blacks to begin schoolingC.to ensure that blacks would remain landless and subservientD.to repeal the Emancipation Proclamation after the Civil War Beijing is located of Shanghai. Shanghai is located slightly north of the line of latitude. Which country shares a border with the northernmost part of China? What are two countries located between the 105 E and 135 E lines of longitude? Conference committees are established when: Group of answer choices Standing committees are unable to reach agreement on bills The House and Senate pass different versions of the same bill There is a major scandal or crisis that needs to be investigated The president requests Congress to conduct a special study on some problem the nation is facing A customer wishes to place an order to short 50,000 shares of ABC stock. The average daily trading volume (ADTV) in ABC stock is 40,000 shares. The representative:________.A. should place the orderb. cannot place the order because the order size exceeds the ADTV.c. should inform the client that the firm may not be able to borrow the stock.d. sholud inform the client that the order can only be executed on an up-bid. 4x 1 < 11 solve for x IQ tests are scaled so that the mean score in a largepopulation should be =100. We suspect that the very-low-birth-weight population has mean score less than100. Infants weiging less than 1500 grams at birth are classed as "very low birth weight". Low birth weight carriesmany risks. One study followed 113 male infants with very low birth weight to adulthood. At age 20, the mean IQ score for these men was (x bar=87.6.) Iq scores vary Normally with standard deviation =15. Give a 95% confidence interval for the mean IQ score at age 20 for allvery-low-birth-weight males. Use the four-step process for confidence interval. 2x-15=3(2x+3)Its multi step equations 7. Problems and Applications Q2 Indicate what happens to the unemployment rate and the labor-force participation rate in each of the following scenarios. Scenario Effect On... Unemployment Rate Labor-Force Participation Rate After a long search, Jon finds a job. Tyrion, a full-time college student, graduates and is immediately employed. After an unsuccessful job search, Arya gives up looking and retires. Daenerys quits her job to become a stay-at-home mom. Sansa has a birthday, becomes an adult, but has no interest in working. Jaime has a birthday, becomes an adult, and starts looking for a job. Cersei dies while enjoying retirement. Jorah dies working long hours at the office. If a person had not drunk any water for 8 hours before collecting a sample, would you expect his/her urine to have a high or low specific gravity? Why? electricity, isrcises1. FYIl in the blanks.(a) Most liquids that conduct electricity are solutions ofand(b)The passage of an electric current through a solution causeeffects1o Write a letter to your friend highlighting the recent changes anddevelopment activities in your district. Earth is 9.3 X 10^(7)mi from the sun. Saturn is about 8.9 X 10^(8) from the sun. About how much farther from the sun is Saturn than earth .. Which of the following has a well described setting that creates an atmosphere?A. My favorite place in the world is my grandmas house. Why? Because my grandma lives there of course. She is the sweetest woman in the world. She is always baking cookies and knitting sweaters. She is the greatest and I love her so much.B. Georges house was incredibly organized. Georges car was incredibly organized. Georges office was, you guessed it, incredibly organized. George felt that whenever anything was out of place, his life would be out of place.C. Crime in this city is on the rise. We have had five reports of arson in the past year. Some were gang related while others seemed to have been done for no reason. This town needs a defender. That defender is me.D. The white padded cell was meant to hold the insane, but to be honest it could drive someone insane. The white walls reflected the light, so it never seemed to get dark enough for sleep. The fan in the cell makes a horrible noise and if that does not get you, the constant dripping water will. It is truly a horrible place. Starting with x1 = 2, find the third approximation x3 to the root of the equation x3 2x 2 = 0. Which of the following BEST describes Information Technology (IT)?IT refers to everything that involves computers.IT deals with how to turn information into meaningful decisions.IT has to do with collecting and utilizing data.IT refers to designing, creating, and improving software. Given the following three points, find by hand the quadratic function they represent.(0,6), (2,16), (3, 33)(1 point)f(x) = 4x2 3x + 6f(x) = -4x2 3x + 6Of(x) = -4x2 + 21x + 6Of(x) = 4x2 + 3x + 6Given the following three points, find by hand the quadratic function they represent.(-1,-8), (0, -1),(1,2)(1 point)O f(x) = -3x2 + 4x - 1O f(x) = -2x2 + 5x - 1Of(x) = -5x2 + 8x - 1O f(x) = -3x2 + 10x - 1Find the equation of a parabola that has a vertex(3,5) and passes through the point(1,13). (1 point)Oy=2(x 3)' + 5Oy= -2(x 3)' + 5Oy= -3(x 3)' +5Oy= 2(x + 3)" - 5Determine if the following set of ordered pairs represents a quadratic function. Explain.(5, 7), (7, 11), (9, 14), (11, 18)(1 point)The y-values go up by the square of the x-value (22 = 4). Therefore, the ordered pairs represent a quadratic equation.The y-values go up by the square of the x-value (22 = 4). Therefore, the ordered pairs do not represent a quadratic equation.Since the differences between the differences of the y-values is not consistent, the ordered pairs do not represent a quadratic equation.Since the differences between the x-values is 2 and the differences between the y-values is 4, that means that the differences between the differencesof the y-values are all zero. Therefore, the ordered pairs represent a quadratic equation.Determine if the following table represents a quadratic function. Explain.1234.5y 13 22 37 58 85(1 point)O The differences between the differences of the y-values is a constant 6, so the ordered pairs do not represent a quadratic equation.The differences between the y-values is a constant 9, so the ordered pairs represent a quadratic equation.The differences between the differences of the y-values is a constant 6, so the ordered pairs represelo a quadratic equation.The differences between the y-values is a constant 9, so the ordered pairs do not represent a quadratic equation.im in a rush :( pls help A company with $70,000 in current assets and $50,000 in current liabilities pays a $1,000 current liability. As a result of this transaction, the current ratio and working capital will Simplify -(7/x-2)+(2x/x) Simplify your answer as much possible It was the bottom of the ninth inning and the home team was down by one. There was a man on second base when Bruce stepped up to the plate. Bruce pointed to right field. The pitcher threw his fastball. Bruce got a hold of it and sent it flying to right field. The home team won. What character trait does Bruce demonstrate?