An element X has the proton number 18.
The next element in the periodic table is an element Y.
Which statement is correct?
Answer:
This question is incomplete
Explanation:
This question is incomplete. However, the element X with the atomic number of 18 is Argon (Ar) while the next element (element Y) in the periodic table, with atomic number 19, is potassium (K).
Element X is found in the group zero (also called group 18 and elements found therewith are referred to as noble gases) of the periodic table while element Y is found in group 1 (elements found here are referred to as alkali metals).
Element X has a completely filled outermost shell while element Y has one electron in its outermost shell.
Element X is a metal while element Y is a nonmetal.
What volume of water is needed to make up a 6.00% (m/v) solution of copper (II) sulphate when 12.0 g of it will be added to water?
Answer:
200 mL of water is needed to make up a 6.00% (m/v) solution of copper (II) sulphate when 12.0 g of it will be added to water.
Explanation:
The solution is the result of the mixture between the solute, which is the substance that dissolves, and the solvent, which is the substance in which a solute dissolves. That is, a solution (or solution) is a mixture of two or more components, perfectly homogeneous since each component is intimately mixed with the other.
The concentration of solutions is the amount of solute contained in a given amount of solvent or solution. A unit of concentration is the percent weight to volume.
The percent weight to volume is the percentage ratio between the weight of the solute and the volume of the solution. It is calculated as:
[tex]Percent =\frac{mass of solute}{volume of solution} *100[/tex]
Mass is measured in grams, while volume is measured in mL.
In this case:
Percent weight to volume= 6%mass of solute= 12 gvolue of solution= ?Replacing:
[tex]6=\frac{12 g}{volume of solution} *100[/tex]
Solving:
volume of solution*6= 12 g*100
[tex]volume of solution=\frac{12 g}{6} *100[/tex]
volume of solution= 200 mL
200 mL of water is needed to make up a 6.00% (m/v) solution of copper (II) sulphate when 12.0 g of it will be added to water
Who is my favourite wrestler?
Answer:
ma herdina thesto wrestling
What is the molecular geometry of Br2
How did reducing the number of
decomposers affect the amount of carbon
dioxide in the ecosystem?
Answer:
As organisms release energy during cellular respiration, carbon dioxide is produced from the carbon in energy storage molecules. ... Carbon dioxide in the biodome decreased because decomposers decreased which means there was a decrease in cellular respiration overall.
btw :
stay safe! :3
can someone check if i did this right. thank you !!
Answer:
noo
Explanation:
its basic
....................
Answer: acidic
Explanation:
The reaction below is performed with 10.0 g of Al and 19.0 g of O2. How many grams of aluminum oxide will be made? 4 Al (s) + 3 O2 (g) → 2 Al2O3 (s)
Answer:
18.89 g of Al₂O₃.
Explanation:
The balanced equation for the reaction is given below:
4Al + 3O₂ —> 2Al₂O₃
Next, we shall determine the masses of Al and O₂ that reacted and the mass of Al₂O₃ produced from the balanced equation. This can be obtained as follow:
Molar mass of Al = 27 g/mol
Mass of Al from the balanced equation = 4 × 27 = 108 g
Molar mass of O₂ = 16 × 2 = 32 g/mol
Mass of O₂ from the balanced = 3 × 32
= 96 g
Molar mass of Al₂O₃ = (27×2) + (16×3)
= 54 + 48
= 102 g/mol
Mass of Al₂O₃ from the balanced equation = 2 × 102 = 204 g
SUMMARY:
From the balanced equation above,
108 g of Al reacted with 96 g of O₂ to produce 204 g of Al₂O₃.
Next, we shall determine the limiting reactant. This can be obtained as follow:
From the balanced equation above,
108 g of Al reacted with 96 g of O₂.
Therefore, 10 g of Al will react with
= (10 × 96)/108 = 8.89 g of O₂.
From the calculation made above, we can see clearly that only 8.89 g out of 19 g of O₂ given, reacted completely with 10 g of Al.
Therefore, Al is the limiting reactant and O₂ is the excess reactant.
Finally, we shall determine the mass of aluminium oxide, Al₂O₃, produced from the reaction.
NOTE: in this case, the limiting reactant will be used because it will give the maximum mass of the aluminium oxide, Al₂O₃ as all of it is consumed in the reaction.
Al is the limiting reactant and the mass of aluminium oxide, Al₂O₃ produced can be obtained as follow:
From the balanced equation above,
108 g of Al reacted to produce 204 g of Al₂O₃.
Therefore, 10 g of Al will react to produce = (10 × 204)/108 = 18.89 g of Al₂O₃.
Thus, 18.89 g of Al₂O₃ were obtained from the reaction.
What dose the wave carry
Answer:
Waves carry energy from one place to another.
Because waves carry energy,some waves are used for communication,eg radio and television waves and mobile telephone signals.
Explanation:
i hope it helps
that's my answer
correct me if im wrong
#carryonlearning7th grade science help me plsssss
Answer:
They grow slowly over time, they are made up of multiple organisms.
Explanation:
One polyp is one individual. A Coral is made up of several polyps. Each polyp is less than 1 centimeters but a coral is made of many polyp so the coral itself cant be 1 centimeters across.
The number of protons plus the number of neutrons in an atom is equal to its
atomic number
mass number
nuclear model
energy level
Explanation:
mass number....................
type of intermolecular forces in paraffin
Answer:
The intermolecular forces between paraffin molecules are entirely due to dispersion forces, and are therefore size dependent.
Explanation:
Answer: The intermolecular forces between paraffin molecules are entirely due to dispersion forces, and are therefore size dependent.
Explanation:
The intermolecular forces between paraffin molecules are entirely due to dispersion forces, and are therefore size dependent. 103 Paraffin wax is soluble in: a) water; b) hexane; c) acetone; d) ethanol Is shopping bag (polyethylene)
hope it helps
. Calculate the pH and the pOH of each of the following solutions at 25 °C for which the substances ionize completely:
(a) 0.200 M HCl
(b) 0.0143 M NaOH
(c) 3.0 M HNO3
(d) 0.0031 M Ca(OH)2
Based on the molarity of the solutions;
For 0.200 M HCl; pH = 0.699, pOH = 13.301For 0.0143 M NaOH; pOH = 1.845, pH = 12.16For 3.0 M HNO3; pH = -0.4771, poH = 14.4771For 0.0031 M Ca(OH)2; pOH = 2.21, pH = 11.79What pHand pOH?pH is the negative logarithm to base ten of the hydrogen ions concentration of a solution.
pH = -log[H+]pOH is the negative logarithm to base ten of the hydroxide ions concentration.
pOH = -log[OH-]Also;
pH + pOH = 14For HCl:
pH = -log [H3O+]
pH =-log (0.200)
pH = 0.699
Then;
poH= 14-0.699
pOH = 13.301
For NaOH:
pOH= -log [OH-]
= -log (0.0143)
pOH = 1.845
Then;
pH= 14-poH
= 14- 1.845
pH = 12.16
For HNO3:
pH= -log[H3O+]
=-log(3.0)
= -0.4771
Then;
pOH = 14-9-0.4771
pOH = 14.4771
For [Ca(OH)2]
molarity = 0.0031M
2 moles of OH- are produced
[OH-]= 2 × 0.0031
[OH-] = 0.0062M
pOH = - log[OH-]
=-log(0.0062)
=-log(6.2x10-3)
=-(-2.21)
pOH = 2.21
Then;
pH =14-2.21
pH =11.79
Learn more about pH and pOH at: https://brainly.com/question/13557815
The table below shows two types of electromagnetic waves and three random applications of electromagnetic waves.
Type of Wave Applications of Waves
Gamma rays 1. Used in spectrometers to measure elements on the surface of celestial bodies
Radio waves 2. Used to measure gravity fields
3. Detect the heat released by astronomical objects
Which of these best matches the waves with their applications?
Gamma rays—2 and radio waves—3
Gamma rays—3 and radio waves—2
Gamma rays—2 and radio waves—1
Gamma rays—1 and radio waves—2
Answer:
Gamma rays—3 and radio waves—2
Explanation:
hard time seeing question, but i believe it is Gamma rays—3 and radio waves—2
A change in 1 degree Celsius is = a change in 1 Kelvin
True
False
Answer:
true
Explanation:
because I'm smart yes yes
Is lithium ionization energy high low or medium?
Please help I’ll give brainliest
REACTION TYPE:
Single displacement/Oxidation-reduction
(Hope this helped UwU)
Answer:
Synthesis reaction is the answer
In which type of bond are electrons shared equally between two atoms?
Answer:
Nonpolar Covalent Bond
Explanation:
A nonpolar covalent bond is one in which the bonding electrons are evenly distributed between the two atoms.
Good Luck!
Hope this helps!
:)
In the diagram shown, what is occurring at the section marked 4 ?
Temperature
:: ا
4
2
Heat Energy
O Melting
Freezing
O Condensation
O Vaporization
Answer:
Vaporization
Since the question does not specify what molecule is being acted upon by the increment in temperature, I'll assume it's water.
When first taken out of the fridge, water is in the form of ice, and it has not been affected by a change in temperature yet, so it's at the origin.
(origin = ice)
As you raise the temperature, however, the ice starts to melt, and melting occur during phase 2. You have to keep the temperature constant for the process to properly occur.
(phase 2 = melting)
After it finishes melting, the ice is now in it's liquid state, which is water. The temperature continues to rise in order to proceed to the next phase.
(2nd slope = water)
Lastly, Water is being vaporized during phase 4. Notice, the temperature is kept constant in order to allow the process to properly occur.
(phase 4 = vaporization)
Which of the following is an advantage of using an energy-efficient household
appliance instead of a traditional household appliance?
A. It works only during the daytime.
B. It uses no electricity
c. It conserves electricity.
D. It does not work as effectively
The electrolysis of water has the equation 2H2O (l) → 2H2 (g) + O2 (g). What type of reaction is this?
A)
Single displacement
B)
Double displacement
C)
Decomposition
D)
Synthesis
Answer:b
Explanation:
URGENT!!!
A solution has a [H3O+] of 1 × 10−5 M. What is the [OH−] of the solution? (5 points)
9 M
14 M
1 × 10−9 M
1 × 10−14 M
Answer:
[tex]{ \bf{from \: ionic \: product \: of \: water : }} \\ { \boxed{ \tt{k _{w} = [H _{3} O {}^{ + } ][OH {}^{ - } ]}}} \\ \\ { \tt{1 \times {10}^{ - 14} = (1 \times {10}^{ - 5} ) [OH {}^{ - } ]}} \\ \\ { \tt{[OH {}^{ - } ] = 1 \times {10}^{ - 9} }} \: M[/tex]
A solution has an [H3O+] of 1 × 10−5 M the [OH−] of the solution will be 1 × 10−9 M and option C is correct.
What is [OH−] of the solution?The water is made up of H2O only and when the pH of it is 7 then the concentration of all the ions would be the same while dissociation the water will get dissociate into H+ ions and OH- ions.
The concentration of OH- ions will be
OH- = Kw {H3O+}
{H3O+} = 1 × 10−5 M.
Kw = 14
substituting the value in the equation,
OH = 14 { 1 × 10−5 M.}
OH = 1 × 10−9 M
Therefore, the solution has an [H3O+] of 1 × 10−5 M the [OH−] of the solution will be 1 × 10−9 M and option C is correct.
Learn more about [OH−] of the solution, here:
https://brainly.com/question/10228714
#SPJ2
Timed PLS help
Given the following reaction:
2 Al + 2 KOH + 4 H2SO4 + 22 H2O --> 3 H2 + 2KAl(SO4)2•12H2O
If you start with 8.3 mL of 9.9M sulfuric acid, what is the theoretical yield of alum?
Answer:
19.5g is the theoretical yield of alum
Explanation:
Based on the balanced reaction, 4 moles of sulfuric acid produce 2 moles of alum. To solve this question we need to find the moles of H2SO4. With these moles we can find the moles of alum and its mass assuming all sulfuric acid reacts producing alum.
Moles Sulfuric Acid:
8.3mL = 0.0083L * (9.9mol/L) = 0.08217 moles sulfuric acid
Moles Alum:
0.08217 moles sulfuric acid * (2mol KAl(SO4)2•12H2O / 4mol H2SO4) =
0.041085 moles KAl(SO4)2•12H2O
Mass Alum -Molar mass: 474.3884 g/mol-
0.041085 moles KAl(SO4)2•12H2O * (474.3884 g/mol) =
19.5g is the theoretical yield of alumDetermine the number of protons, electrons, and neutrons present in an atom of patassium. Explain how you determined your answer using complete sentences.
Please make sure your right.
Thank you!!!
Identify the atom oxidized, the atom reduced, the oxidizing agent, and the reducing agent. 2Fe + 3V2O3 -------> Fe2O3 + 6VO
Explanation:
Fe- reducing agent (since it is oxidized to fe203)
v203- oxidizing agent(since it is reduced)
In the given reaction, Fe is the reducing agent and V is the oxidizing agent.
What is a reducing agent?An atom or compound that loses its electrons to other substances in a reduction-oxidation reaction and gets oxidized to a higher valency state is called a reducing agent.
A reducing agent can be defined as one of the reactants of a redox reaction that reduces the other reactant by giving its electrons to the reactant. If the reducing agent can not give away its electrons to others in a reaction, then the reduction reaction cannot occur.
Given, the following chemical reaction:
2Fe + 3V₂O₃ → Fe₂O₃ + 6VO
The V₂O₃ oxidation state of V:
2 x + 3(-2) = 0
2x = 6
x = + 3
The Fe₂O₃ oxidation state of Fe:
2 y + 3 (-2) = 0
2y = 6
y = + 3
The V acts as an oxidizing agent because it accepts one electron to change the oxidation state from +3 to +2.
Fe acts as a reducing agent because it gives out its electrons to change the oxidation state from 0 to +3.
Learn more about reducing agent, here:
brainly.com/question/2890416
#SPJ2
Concentrations-
How many moles of HCI are present in 562.0 ml of a 6.17 M HCI solution?
If possible, show work.
do the
math!
Wavelength Frequency
Speed
Medium
200 Hz
1500 m/s
The table shows measurements of
some properties of a sound wave in
water and in air.
Water
400 Hz
3.75 m
Water
343 m/s
Air (20°C)
10 m
Calculate Using what you know
about the relationship between
wavelength, frequency, and speed,
fill in the table.
17.15 Hz
343 m/s
Air (20°C)
1a
CHALLENGE What can this table
tell
you about the speed of a wave?
Answer:
everything can be found in the picture
what is indepent and dependent variables
Answer:
The independent variable is the cause. Its value is independent of other variables in your study.
The dependent variable is the effect. Its value depends on changes in the independent variable.
Ex: The ice cube melts on the stove.
Dependent variable: Ice Cube
Independent variable: heat of stove
Answer:
In an experiment, the IV(independent variable) is a variable that is changed to see how it affects something else, and the DV (dependent variable)is a variable that is being measured/observed.
hope this help!
please mark as brainiest <3
12. Which nonmetal is the most reactive?
A bromine
B
iodine
C) fluorine
D) chlorine
Answer:
C Fluorine
Explanation:
A compound contains 46.67% Silicon and 53.33% oxygen. What is the
simplest formula for this compound?
Answer:
SiO2
Explanation:
the structure of butanoic acid
answer on here fjchcjfjdnc.com
