Answer:
i think it is To limit the rights of individual citizens
Explanation:
let's say you hypothetically ran over someone with your car, and they are now under your car in between the front wheels and the back wheels, right, and they're stuck as in can't breathe type stuck, right, do you keep driving so they can breathe or do you let them chill under your car?
just curious...
question: is this actually hypothetical?
Explanation:
also just leave the car there go get some McDonald's or sum and come back and if they're still breathing then go ahead and move the car .
Answer:
the same thing the last guy said
If the angle between the net force and the displacement of an
object is greater than 90 degrees, then which option holds
true?
aThe object stops
b Kinetic energy decreases
C Kinetic energy increases
d Kinetic energy remains the same
Answer: kinetic energy decreases
Explanation:
When the angle between the net force and the displacement of an
object is greater than 90 degree, the Kinetic energy decreases.
The work done by a net force in moving an object over a given distance is given as;
[tex]W = F \times d \ cos(\theta)[/tex]
where;
θ is the angle between the net force and the displacementThe value of cos(θ) decreases from 0 to 180, consequently, the value of work-done will decrease as well.
Based on work-energy theorem, the work done on the object is equal to kinetic energy of the object.
[tex]W = K.E[/tex]
Thus, we can conclude that when the angle increases, the Kinetic energy decreases.
Learn more about kinetic energy here:https://brainly.com/question/10063455
A football player kicks a ball with a mass of 0.5 kg. The average acceleration of the football was 15 m/s/s. How much force did the kicker apply to the football?
A. 15.5 N
B. 7.5 N
C. 14.5 N
D. 30 N
Answer:
Explanation:
F = m*a = (0.5)*15 = 7.5 N
Two skaters, each of mass 51.2 kg, approach each other along parallel paths separated by 2.92 m. They have equal and op- posite velocities of 1.38 m/s. The first skater carries a long light pole 2.92 m long, and the second skater grabs the end of it as he passes; see Fig. 10-30. Assume frictionless ice. (a) Describe quantitatively the motion of the skaters after they are connected by the pole. (b) By pulling on the pole, the skaters reduce their separation to 0.940 m. Find their angular speed then.
Answer:
a) w = 0.4726 rad / s, b) w_{f} = 4.56 rad / s
Explanation:
a) the two skaters have an angular momentum, for which we will form a system formed by the two of them, in this case when they collide the forces are internal and the moment is conserved.
Initial instant. When the skaters approach, just before touching
L₀ = r p = r m v
in this case the result is the same if we take the reference system at the midpoint or on one of the skaters. We place the reference system on one of the skaters
Final moment. After being joined by the pole
[tex]L_{f}[/tex] = I w
as the forces are internal, the ngualr moment is conserved
L₀ = L_{f}
r m v = I w
suppose we approximate the skaters as particles
I = m r²
we substitute
r m v = m r² w
w = v /r
we calculate
w = 1.38 /2.92
w = 0.4726 rad / s
What happens is that when the two skaters lower the pole, their velocity acts as a torque, creating a rotational movement with angular velocity w.
b) When the skaters who are at r₀ = 2.92 m approach [tex]r_{f}[/tex] = 0.940 m as the system is isolated, the angular momentum is conserved
initial instant. r₀ = 2.92
L₀ = I w
final instant r_{f} = 0.940 m
L_{f} = I_{f} w_{f}
L₀ = L_{f}
I w = I_{f} w_{f}
let's approximate skaters as particles
I = m r²
we substitute
m r² w = m r_{f}² wf
[tex]w_{f}[/tex] = [tex]\frac{r^{2} }{r_{f}^{2} } w[/tex]
we calculate
w_{f} = [tex]\frac{2.92^{2} }{ 0.940^{2} }[/tex] 0.4726
w_{f} = 4.56 rad / s
we see that the angular velocity increases
An object of mass 30 kg is falling in air and experiences a force due to air resistance of 50 newtons. Calcuate the acceleration of the object
Answer:
this answer you question
Using a pulley, you apply a force of 10 Newtons to life an object that weighs 100 Newtons. What is the mechanical advantage of that pulley?
Answer: 10
Explanation:
The mechanical advantage of that pulley is 10.
What is mechanical advantage?The force amplified by utilizing a tool, mechanical device, or machine system is known as mechanical advantage. To achieve the desired output force amplification, the gadget trades off input forces against movement. The law of the lever serves as a paradigm for this.
Mechanisms are machine parts made to control forces and motion in this way.
Given that: the weighs of the object: W = 100 Newton.
Applied force: F = 10 N.
For using a pulley, you have to apply a force of 10 Newtons to lift an object that weighs 100 Newtons.
Hence, the mechanical advantage of the pulley is
= Weighs of the object/applied force
= 100 Newton / 10 Newton.
= 10.
The mechanical advantage of it is 10.
Learn more about mechanical advantage here:
https://brainly.com/question/16617083
#SPJ5
How are energy and motion related?
Motion energy is indeed the total of kinetic and potential energies in a workable item. The energy contained in moving things is known as motion energy.
What is energy?In physics, energy is the capacity to accomplish work. It can be potential, kinetic, thermal, electric, chemical, radioactive, or in other forms. There is also heat and work, which is energy inside the process of being transferred through one body to the other. Energy is always classified according to its type once it has been transmitted.
The energy contained in moving things is known as motion energy, sometimes known as mechanical energy. More energy is saved when the thing goes quicker. Motion energy is indeed the total of kinetic and potential energies in a workable item.
Therefore, motion energy is indeed the total of kinetic and potential energies in a workable item.
To learn more about energy, here:
https://brainly.com/question/29763772
#SPJ2
I need help with this please
Answer:
1. The respiratory system functions when our involuntary nervous system sends impulses to the muscles in the diaphragm; thereby, causing the lungs to expand and contract.
2. The respiratory system oxygenates the blood which is vital for bodily function as oxygenated blood is carried from your lungs to the left side of your heart, to be circulated throughout the body. Furthermore deoxygenated blood is carried back to the right side of your heart to get oxygenated once more.
3. The other body systems that are crucial for the lungs to function are the nervous system and the muscular system.
4. without the raspatory system the body wouldn't receive any oxygen and the brain would slowly die. therefore, without the brain the heart would stop functioning and atrophy etc.
Explanation:
A projectile is fired with a velocity of 8 m/s at an angle of 65º. What is the
vertical component of the velocity?
A. 6.5 m/s
B. 3.4 m/s
C. 10.2 m/s
D. 7.2 m/s
Answer:
i think its D
Explanation:
Which describes velocity?
Answer:
Velocity is the rate at which the position changes. The average velocity is the displacement or position change per time ratio.
Explanation:
Answer:
The velocity of an object is the rate of change of its position with respect to a frame of reference, and is a function of time. Velocity is equivalent to a specification of an object's speed and direction of motion (e.g. 60 km/h to the north).
Other units: mph, ft/s
In SI base units: m/s
Explanation:
i dont know if this helps.
True or False: A cheetah, that has a mass of 40 kg, must exert a bigger force to change directions than a 15 kg gazelle because the cheetah has a greater mass
HELP ASAP!
Everything on screenshot!
A crate is pulled 7 m across a smooth surface. The tension in the rope pulling the crate is 40 N. If the work on the crate is 247 J, what is the angle the rope makes with the horizontal
Answer:
61.9°
Explanation:
The formula for calculating the workdone is expressed as
Workdone = Fdsin theta
F is the force applied on the crate
d is the distance covered
theta is the angle that the rope makes with the horizontal
Given
F = 40N
d = 7m
Workdone = 247J
Substituting into the formula:
247 = 40(7)sin theta
247 = 280sin theta
sin theta = 247/280
sin theta = 0.88214
theta = arcsin(0.88214)
theta = 61.9°
Hence the angle that the rope makes with the horizontal is 61.9°
A 1.3-kg model airplane flies in a circular path on the end of a 23-m line. The plane makes
4.3 revolutions each minute.
a. What is the period of the motion?
b. What is the speed of the plane?
c. What is the acceleration of the model plane?
d. How much force must the line exert on the plane to keep it moving in the circular
motion?
(a) The plane makes 4.3 revolutions per minute, so it makes a single revolution in
(1 min) / (4.3 rev) ≈ 0.2326 min ≈ 13.95 s ≈ 14 s
(b) The plane completes 1 revolution in about 14 s, so that in this time it travels a distance equal to the circumference of the path:
(2π (23 m)) / (14 s) ≈ 10.3568 m/s ≈ 10 m/s
(c) The plane accelerates toward the center of the path with magnitude
a = (10 m/s)² / (23 m) ≈ 4.6636 m/s² ≈ 4.7 m/s²
(d) By Newton's second law, the tension in the line is
F = (1.3 kg) (4.7 m/s²) ≈ 6.0627 N ≈ 6.1 N
If two cars A and B are moving with velocity 60 km/hr and 80 km/hr
respectively in thesamedirection. What willbethe relative velocity of B with
respect to A? (20 kmhr)
Answer:
VAB = 20km/hr
Explanation:
Given the following data;
Velocity of car A, VA = 60km/hr
Velocity of car B, VB = 80km/hr
To find the relative velocity of B w.r.t A, VAB;
Since the two cars are moving in the same direction, we have;
VAB = VB - VA
Substituting into the equation, we have;
VAB = 80 - 60
VAB = 20km/hr
Therefore, the relative velocity of car B with respect to car A is 20 kilometers per hour.
PLEASE ANSWER FAST ill give brainliest
Do you know how to do this clever ones hmmm?? Describe and explain the motion of a small ball floating on a pond when waves travel across the pond.
Answer:
Ball moves up and down repeatedly on surface because waves consist of successive crests and troughs moving across surface, each crest pushes ball up and each trough allows it to move down.
Explanation:
the combined focal length of two thin lens is 24 cm and the focal length of one converging lens is 8
cm what is the focal length of the other
Answer: f = -12 cm
Explanation: Combined lenses is an array of simple lenses with a common axis. The combination is useful for correction of optical aberrations which cannot be corrected by simple lenses.
When two lenses are in contact and are thin, focal lengths are related as:
[tex]\frac{1}{F} =\frac{1}{f_{1}} +\frac{1}{f_{2}}[/tex]
If there is a distance between the lenses, the focal length will be:
[tex]\frac{1}{F} =\frac{1}{f_{1}} +\frac{1}{f_{2}} -\frac{d}{f_{1}f_{2}}[/tex]
Since the lenses in the question above are thin and in contact, the focal length of one of them will be:
[tex]\frac{1}{F} =\frac{1}{f_{1}} +\frac{1}{f_{2}}[/tex]
[tex]\frac{1}{f_{2}} =\frac{1}{f_{1}} -\frac{1}{F}[/tex]
[tex]\frac{1}{f_{2}} =\frac{1}{8} -\frac{1}{24}[/tex]
[tex]\frac{1}{f_{2}} =\frac{-2}{24}[/tex]
[tex]f_{2}=[/tex] -12
The focal length of the other lens is -12 cm, with the negative sign meaning it's a converging lens.
Suppose that when spring was wound, 100J of work was done but 15J escaped to the surrounding as heat. The change in internal energy of the spring is?
Answer: 85J
Explanation:
From the question, we are informed that when spring was wound, 100J of work was done but 15J escaped to the surrounding as heat.
Therefore, the change in internal energy of the spring will be calculated as:
ΔU = q + w
where, q = -15J
w = 100J
ΔU = -15J + 100J
= 85J
a 45 kg boy sits on a horse on a carousel 5.0 m from the center of the circle. he makes a revolution every 8.0 s.
calculate his speed.
what is centripetal force acting on the boy?
For every complete revolution the boy makes around the center of the carousel, he travels a distance of 2π (5.0 m) = 10π m, which gives a linear speed of
v = (10π m) / (8.0 s) ≈ 3.927 m/s
Then his centripetal acceleration would be
a = v ² / (5.0 m) ≈ 3.084 m/s²
so that the centripetal force exerted on him has magnitude
F = (45 kg) a ≈ 138.791 N ≈ 140 N
(rounded to 2 significant digits)
A block of mass m is hung from the ceiling by the system of massless springs consisting of two layers. The upper layer consists of 3 strings in paralle, and the lower layer consists of 2 strings in parallel. The horizontal bar between the two layers has negligible mass. The force constants of all springs are k. Calculate the period of the vertical oscillations of the block.
Answer:
T₀ = 2π [tex]\sqrt{\frac{m}{k} }[/tex] T = [tex]\sqrt{\frac{5}{6} }[/tex] T₀
Explanation:
When the block is oscillating it forms a simple harmonic motion, which in the case of a spring and a mass has an angular velocity
w = [tex]\sqrt{k/m}[/tex]
To apply this formula to our case, let's look for the equivalent constant of the springs.
Let's start with the springs in parallels.
* the three springs in the upper part, when stretched, lengthen the same distance, therefore the total force is
F_total = F₁ + F₂ + F₃
the springs fulfill Hooke's law and indicate that the spring constant is the same for all three,
F_total = - k x - k x - kx = -3k x
therefore the equivalent constant for the combination of the springs at the top is
k₁ = 3 k
* the two springs at the bottom
following the same reasoning the force at the bottom is
F_total2 = - 2 k x
the equivalent constant at the bottom is
k₂ = 2 k
now let's work the two springs are equivalent that are in series
the top spring is stretched by an amount x₁ and the bottom spring is stretched x₂
x₂ = x -x₁
x₂ + x₁ = x
if we consider that the springs have no masses we can use Hooke's law
[tex]-\frac{F_{1} }{k_{1} } - \frac{F_{2}}{k_{2} } = \frac{F}{k_{eq} }[/tex]
therefore the equivalent constant is the series combination is
[tex]\frac{1}{k_{eq} } = \frac{1}{k_{1} } + \frac{1}{k_{2} }[/tex]
we substitute the values
\frac{1}{k_{eq} } = \frac{1}{3k } + \frac{1}{2k }
\frac{1}{k_{eq} } = \frac{5}{6k} }
k_eq = [tex]\frac{6k}{5}[/tex]
therefore the angular velocity is
w = [tex]\sqrt{\frac{6k}{5m} }[/tex]
angular velocity, frequency, and period are related
w = 2π f = 2π / T
T = 2π / w
T = 2π [tex]\sqrt{\frac{5m}{6k} }[/tex]
T₀ = 2π [tex]\sqrt{\frac{m}{k} }[/tex]
T = [tex]\sqrt{\frac{5}{6} }[/tex] T₀
An inductor is connected to a 120-V, 60-Hz supply. The current in the circuit is 4.3A. What is the inductive reactance
Answer:
27.91ohms
Explanation:
From the question we are given the following
Voltage across the inductor VL = 120V
Current in the inductor I = 4.3A
Required
Inductive reactance XL
Using two formula
VL =IXL
XL = VL/I
XL = 120/4.3
XL = 27.91ohms
Hence the inductive reactance is 27.91ohms
A person lifts a heavy load to a vertical height of 2.0 m in 3 seconds. If he/she had done this more slowly in 6 seconds, the
work on the load would have been:
Four times as great
half as great
the same
twice as great
Answer:
If the heavy load had been lifted more slowly, the work done on the load would have been the same.
Explanation:
Work done on an object is given as;
W = Fd
where;
F is the force applied on the object
d is the displacement of the object
for the given question, the applied force on the load = mg (mass of the load multiplied by acceleration due to gravity).
Also, the displacement of the object = vertical height the load was lifted.
W = mgh
The work done on the load is independent of time.
Thus, if the heavy load had been lifted more slowly, the work done on the load would have been the same.
A person lifting a heavy load to a vertical height of 2.0 m in 3 seconds does the same work as if he/she lifts it in 6 s.
A person lifts a heavy load to a vertical height of 2.0 m in 3 seconds.
We want to compare the work done with the one that he/she would have done if the process had taken 6 seconds.
What is work?In physics, work (W) is the energy transferred to or from an object via the application of force (F) along a displacement (s).
W = F × s
Given the displacement is the same (2.0 m) and the force needed is also the same (weight of the object), the work is the same for both processes.
A person lifting a heavy load to a vertical height of 2.0 m in 3 seconds does the same work as if he/she lifts it in 6 s.
Learn more about work here: https://brainly.com/question/25064916
The work done on the machine is called
Answer:
Hey Queen Messy here!
Work input
Explanation:
The work you do on a machine is called the work input. The force you apply to the machine to do the work is the input force. The work done by the machine on another object is called the work output. The force the machine applies to do this work is the output force.
what medical uses does radiation have?
Answer:
Radiation is used in monitoring the response of tumors to treatment and in distinguishing malignant tumors from benign ones. Bone and liver scans can detect cancers that have spread to these organs. Half of all people with cancer are treated with radiation, and the number of those who have been cured continues to rise.
Explanation:
''.''
Which type of telescope is best used to detect distant planets?
A block slides along a frictionless surface and onto a slab with a rough surface. The slab has mass of 4 kg and the block has mass of 2 kg. What is the friction force on the small block at t = 1 second?
Answer: the friction force on the small block at t equals 1 second is 2N
Explanation:
Given the data in the question;
from the slope in the graph provided, we will get the acceleration of the slab
At t = 1 seconds
Slope = acceleration = ( 1 - 0) / ( 2 - 0 ) = 1/2 = 0.5 m/s²
Force = ma = 4 × 0.5 = 2 N
so by Newton's third law
Force on block will be same which is 2N
Therefore the friction force on the small block at t equals 1 second is 2N
Please answer the questions... I will surely mark you as the brainliest according to me :)
Answer:
(a) You can tell that have the same strength because they have attracted the same amount of paper clips.
(b) Iron is used in electromagnets because steel retained magnetic properties after the power was turned off, but in the iron, the paper clips dropped off right away.
Question 3 (10 points)
The force of gravity depends on what two factors?
Question 3 options:
mass and distance
mass and acceleration
distance and time
velocity and displacement
Answer:
mass and distance
Explanation:
The force of gravity acting on a body depends on the mass of the body and the distance between the bodies.
This is based on Newton's law of Universal gravitation which states that "the force of gravity between two bodies is directly proportional to the product of their masses and inversely proportional to the distance between them".
We see that the more the masses between two bodies, and the lower their separation the more the gravitational force between them.
how much KE does the car have if it weighs 450kg and moves at the speed of 23 m/s?
Answer:-The formula of to calculate KE = 1/2 m v^2
so we,
KE = 1/2 (450kg)(23m/s)^2
KE = 1/2 ×238050
KE = 119025
Explanation: In Physics Formulas mean everything.
