What is the strength of the electric field between two parallel conducting plates separated by 1.00 cm and having a potential difference (voltage) between them of 3.22 x 104 V

Answers

Answer 1

Answer:

[tex]E=3.22*10^6 N/C[/tex]

Explanation:

From the question we are told that:

Separation Distance [tex]d=1.0cm =0.01m[/tex]

Potential difference [tex]V=3.22 * 10^4 V[/tex]

Generally the equation for Electric Field strength is mathematically given by

 [tex]E=\frac{v}{d}[/tex]

 [tex]E=\frac{3.22*10^4}{0.01}[/tex]

 [tex]E=3.22*10^6 N/C[/tex]


Related Questions

4. Which of the following statements best describes the relationship
between mechanical, kinetic and potential energies of an object of mass
m kg that is thrown vertically upwards with in initial velocity of v. m/s.
A. Kinetic energy increases while potential energy decrease and mechanical
energy remains constant.
B. Kinetic energy decreases, while potential energy increases and mechanical
energy remains constant.
C. Both kinetic and potential energies decrease while mechanical energy
increases.
D. Both kinetic and potential energies increase while mechanical energy
remains constant.
(1)
21

Answers

Answer:

D

Explanation:

increase while mechanical energy remains constant

True or False: The forces applied by our muscles on our bones are usually several times larger than the forces we exert on the outside world with our limbs.

Answers

Answer:

True

Explanation:

This is because of the point where the forces are applied by our muscles and

the angle they have about the bones. Take for example the  diagram I uploaded.

If we do a free body diagram and a sum of torques, we would get that:

[tex]F_{muscle}sin \theta r1 - mg r2 = 0[/tex]

In this case, mg is the same in magnitude as the force made by the hand to hold the ball, so:

[tex]F_{muscle}sin \theta r_{1} - F_{hand} r_{2} = 0[/tex]

If we solve the equation for the force of the muscle we would get that:

[tex]F_{muscle}=\frac{F_{hand}r_{2}}{r_{1}sin \theta}[/tex]

Since r2 is greater than r1 and the sin function can only return values that are less than 1, this means that the force of the muscle is much greater than the force used by the hand to hold the weight.

Let's use some standard values to prove this, let's say that r1=10cm, r2=35cm and theta=60 degrees. When inputing the values into the equation we get:

[tex]F_{muscle}=\frac{F_{hand}(35cm)}{(10cm)sin (60^{o})}[/tex]

which yields:

[tex]F_{muscle}=4.04 F_{hand}[/tex]

so in this example, the force made by the muscle is 4 times as big as the force exerted by the hand.

Your car rolls slowly in a parking lot and bangs into the metal base of a light pole. In terms of safety, is it better for your collision with the light pole to be elastic, inelastic, or is the safety risk the same for either case? Explain.

Answers

Answer:

AN ELASTIC COLLISION IS SAFER

Explanation:

IT'S BECAUSE THE MOVEMENT IS PRESERVED. YEN AN ELASTIC

COLLISION, THE ELASTIC BODY ABSORBS SOME OF THE MOVEMENT.

THIS CAUSES THE CAR TO SLOW DOWN MORE SLOWLY THAN IN AN

INELASTIC COLLISION WHERE IT DECELERATES FASTER.

ANYWAY I LEAVE YOU THE LINK

(THEY ALREADY DELETED THE ENGLISH SITE, BUT YOU CAN USE

TRANSLATOR):

https://gscourses.thinkific.com

B.F.Skinner emphesized the importance of-----?

Answers

Answer:

BFSkinner enfatizó la importancia de   creía en la importancia de desarrollar la psicología experimental y dejar atrás el psicoanálisis y las teorías acerca de la mente basadas en el simple sentido común.

Explanation:

He gave emphasis on the importance of reinforcement in language acquisition. He gave one of the earliest scientific explanations of language acquisition in 1957. He accounted for language development using the influence of the environment.

Question 1 of 10
Which nucleus completes the following equation?
239UHe+?
A. 228 Th
B. 2220
c. 23. Pu
D. 78Th
SUBMIT

Answers

Answer:

Option D. ²²²₉₀Th

Explanation:

Let the unknown be ⁿₘZ. Thus, the equation becomes:

²²⁶₉₂U —> ⁴₂He + ⁿₘZ

Next, we shall determine n, m and Z. This can be obtained as follow:

For n:

226 = 4 + n

Collect like terms

226 – 4 = n

222 = n

n = 222

For m:

92 = 2 + m

Collect like terms

92 – 2 = m

90 = m

m = 90

For Z:

ⁿₘZ => ²²²₉₀Z => ²²²₉₀Th

Therefore, the complete equation becomes:

²²⁶₉₂U —> ⁴₂He + ⁿₘZ

²²⁶₉₂U —> ⁴₂He + ²²²₉₀Th

Thus, the unknown is ²²²₉₀Th

A 3.00-kg ball swings rapidly in a complete vertical circle of radius 2.00 m by a light string that is fixed at one end. The ball moves so fast that the string is always taut and perpendicular to the velocity of the ball. As the ball swings from its lowest point to its highest point Group of answer choices the work done on it by gravity is -118 J and the work done on it by the tension in the string is zero. the work done on it by gravity is -118 J and the work done on it by the tension in the string is 118 J. the work done on it by gravity and the work done on it by the tension in the string are both equal to -118 J. the work done on it by gravity is 118 J and the work done on it by the tension in the string is -118 J. the work done on it by gravity and the work done on it by the tension in the string are both equal to zero.

Answers

Answer:

The ball moves from lowest to highest point:

W = M g h = 3 * 9.8 * 4 = 118 J

This is work done "against" gravity so work done by gravity is -118 J

The tension of the string does no work because the tension does not

move thru any distance   W = T * x = 0 because the length of the string is fixed.

What is the approximate radius of an equipotential spherical surface of 30 V about a point charge of +15 nC if the potential at an infinite distance from the surface is zero?

Answers

Answer:

V = k Q / R       potential at distance R for a charge Q

R = k Q / V

R = 9 * 10E9 * 15 * 10E-9 / 30 = 9 * 15 / 30 = 4.5 m

Note: Our equation says that if R if infinite then V must be zero.

The patellar tendon attaches to the tibia at a 20 deg angle 3 cm from the axis of rotation at the knee. If the force generated in the patellar tendon is 400 N, what is the resulting angular acceleration, in rad/s2), if the lower leg and foot have a combined mass of 4.2kg and a given radius of gyration of 25 cm

Answers

Answer:

the resulting angular acceleration is 15.65 rad/s²

Explanation:

Given the data in the question;

force generated in the patellar tendon F = 400 N

patellar tendon attaches to the tibia at a 20° angle 3 cm( 0.03 m ) from the axis of rotation at the knee.

so Torque produced by the knee will be;

T = F × d⊥

T = 400 N × 0.03 m × sin( 20° )

T = 400 N × 0.03 m × 0.342

T = 4.104 N.m

Now, we determine the moment of inertia of the knee

I = mk²

given that; the lower leg and foot have a combined mass of 4.2kg and a given radius of gyration of 25 cm ( 0.25 m )

we substitute

I = 4.2 kg × ( 0.25 m )²

I = 4.2 kg × 0.0626 m²

I = 0.2625 kg.m²

So from the relation of Moment of inertia, Torque and angular acceleration;

T = I∝

we make angular acceleration ∝, subject of the formula

∝ = T / I

we substitute

∝ = 4.104 / 0.2625

∝ = 15.65 rad/s²

Therefore, the resulting angular acceleration is 15.65 rad/s²

A fan that is rotating at 960 rev/s is turned off. It makes 1500 revolutions before it comes to a stop. a) What was its angular acceleration(assuming it was constant)

Answers

Answer:

α = 1930.2 rad/s²

Explanation:

The angular acceleration can be found by using the third equation of motion:

[tex]2\alpha \theta=\omega_f^2-\omega_i^2[/tex]

where,

α = angular acceleration = ?

θ = angular displacement = (1500 rev)(2π rad/1 rev) = 9424.78 rad

ωf = final angular speed = 0 rad/s

ωi = initial angular speed = (960 rev/s)(2π rad/1 rev) = 6031.87 rad/s

Therefore,

[tex]2\alpha(9424.78\ rad) = (0\ rad/s)^2-(6031.87\ rad/s)^2\\\\\alpha = -\frac{(6031.87\ rad/s)^2}{(2)(9424.78\ rad)}[/tex]

α = - 1930.2 rad/s²

negative sign shows deceleration

Use the following information to answer the next question.
Environmental Concerns
1. release of greenhouse gases
2. release of gases that cause acid rain
3. release of excess heat
4. depletion of solar energy
5. depletion of geothermal energy
6. flooding of land
Which of the above environmental concerns are associated with the production of electricity?
Select one:
O A. 2, 3, and 4
O B. 1, 2, 3, and 6
O C. 1, 2, 3, 5 and 6
O D. 1, 3, and 5

Answers

Answer:

1.Emitted primarily through the burning of fossil fuels (oil, natural gas, and coal), solid waste, and trees and wood products. Changes in land use also play a role. Deforestation and soil degradation add carbon dioxide to the atmosphere, while forest regrowth takes it out of the atmosphere.

2.Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.

3.Untreated, heat exhaustion can lead to heatstroke, a life-threatening condition that occurs when your core body temperature reaches 104 F (40 C) or higher. Heatstroke requires immediate medical attention to prevent permanent damage to your brain and other vital organs that can result in death.

4.The loss of solar energy in passing through the atmospheric layers is called the atmospheric deflection. ... The longer the path traversed, the greater the amount of radiant energy depleted. Various processes whereby heat energy is lost through the atmosphere are known as scattering, diffusion, absorption, and reflection.

5.Geothermal energy is renewable because the Earth has retained a huge amount of the heat energy that was generated during formation of the planet. In addition, heat is continuously produced by decay of radioactive elements within the Earth. The amount of heat within the Earth, and the amount that is lost though natural processes (e.g. volcanic activity, conduction/radiation to the atmosphere), are much, much more than the amount of heat lost through geothermal energy production. At any one geothermal field, however, the temperature of the geothermal reservoir or the fluid levels/fluid pressure in the reservoir may decrease over time as fluids are produced and energy is extracted. Produced fluids can be re-injected to maintain pressures, although this may further cool down the reservoir if care is not taken. Over time, it is commonly necessary to drill additional wells in order to maintain energy production as temperatures and/or reservoir fluid pressures decline.

6.Floods, Floodplains, and Flood-Prone Areas. ... Flooding is a result of heavy or continuous rainfall exceeding the absorptive capacity of soil and the flow capacity of rivers, streams, and coastal areas. This causes a watercourse to overflow its banks onto adjacent lands.

The environmental concerns associated with the production of electricity are the release of greenhouse gases, the release of gases that cause acid rain, the release of excess heat, the flooding of land, and the depletion of geothermal energy so, option C is correct.

What is electricity?

The presence or movement of charged particles is electricity. The movement of electrons through a circuit is known as an electric current. The accumulation of electrons on an insulator causes static electricity.

Mostly released when solid trash, trees, and wood products are burned, along with fossil fuels (coal, gas, and oil).

Land use changes also have an impact. Carbon dioxide is released into the atmosphere by deforestation and soil erosion, while it is removed from it by forest regeneration.

To know more about electricity:

https://brainly.com/question/29812640

#SPJ2

A plane flying horizontally at an altitude of 1 mi and a speed of 480 mi/h passes directly over a radar station. Find the rate at which the distance from the plane to the station is increasing when it is 3 mi away from the station.

Answers

Answer:

First remember that the distance between two points (a, b) and (c, d) is given by the equation:

[tex]d = \sqrt{(a - c)^2 + (b - d)^2}[/tex]

Now let's define the position of the radar as:

(0mi, 0mi)

Then we can write the position of the plane as:

(480mi/h*t, 1mi)

where t is time in hours.

Then we can write the distance equation as:

[tex]d(t) = \sqrt{(480\frac{mi}{h}*t - 0mi)^2 + (1mi -0mi)^2 } \\\\d(t) = \sqrt{(480\frac{mi}{h}*t )^2 + (1mi)^2 }[/tex]

Now we want to get:

the rate at which the distance from the plane to the station is increasing when it is 3 mi away from the station.

So first we want to find the value of t such that:

d(3) = 3mi

We will look at the positive value of t, because at this point the plane is increasing its distance to the station.

[tex]3mi = \sqrt{(480\frac{mi}{h}*t )^2 + (1mi)^2 }\\\\(3mi)^2 = (480\frac{mi}{h}*t )^2 + (1mi)^2\\\\9mi^2 - 1mi^2 = (480\frac{mi}{h}*t )^2\\\\8mi^2 = (230,400 mi^2/h^2)*t^2\\\\\\\sqrt{\frac{8mi^2}{230,400 mi^2/h^2} } = t = 0.0059 h[/tex]

The rate of change when the plane is 3 mi away from the station is:

d'(0.0059h)

remember that:

d'(t) = dd(t)/dt

We can write:

d(t) = h( g(t) )

such that:

h(x) = √x

g(t) = (480mi/h*t)^2 + (1mi)^2

then:

d'(t) = h'(g(t))*g'(t)

This is:

[tex]d'(t) = \frac{dd(t)}{dt} = \frac{1}{2}*\frac{2*t*480mi/h}{\sqrt{(480mi/h*t)^2 + (1mi)^2} }[/tex]

The rate of change at t = 0.0059h is then:

[tex]d'(0.0059h) = \frac{1}{2}*\frac{2*0.0059h*(480mi/h)^2}{\sqrt{(480mi/h*0.0059h)^2 + (1mi)^2} } =452.6 mi/h^2[/tex]

A boy of mass 50 kg on a motor bike is moveny coith 20m/see what is hio k.E​

Answers

Kinetic energy=a half mv squared
Mass=50kg
Velocity=20m/s
1/2 multiply 50 multiply 20 squared
1/2 multiply 50 multiply 400
1/2 multiply 20000
1 multiply 20000 divide 2
20000 divide 2=1000

Kinetic energy=1000J

A spherical conductor of radius = 1.5 cm with a charge of 3.9 pC is within a concentric hollow spherical conductor of inner radius = 3 cm, and outer radius = 4 cm, which has a total charge of 0 pC. What is the magnitude of the electric field 2.3 cm from the center of these conductors?

Answers

Answer:

The answer is "66.351 N/C"

Explanation:

Given:

[tex]a=1.5\ cm= 1.5 \times 10^{-2}\ m\\\\q_1=3.9\ pc\\\\b=3\ cm\\\\c= 4\ cm\\\\q_2=0 \ pc\\\\[/tex]

Using Gauss Law:

[tex]\oint \vec{E} \cdot \vex{dA}= \frac{Q_{enc}}{\varepsilon_0 }[/tex]

[tex]E \times 4 \pi\ r^2=\frac{Q_{enc}}{\varepsilon_0}\\\\E= \frac{Q_{enc}}{4 \pi\ r^2 \varepsilon_0}= \frac{1}{4 \pi \varepsilon_0} \frac{Q_{enc}}{r^2}= \frac{k_e\ Q_{enc}}{r^2}\\\\[/tex]

                                      [tex]=\frac{9\times 10^{9} \times 3.9 \times 10^{-12}}{(2.3\times 10^{-2})^2}\\\\=\frac{35.1\times 10^{-3}\ }{(2.3\times 10^{-2})^2}\\\\=\frac{35.1\times 10^{-3}\ }{5.29 \times 10^{-4}}\\\\=\frac{35.1\times 10 }{5.29 }\\\\=\frac{351}{5.29 }\\\\=66.351\ \frac{N}{C}[/tex]

In the graph below, why does the graph stop increasing after 30 seconds?

A. The hydrogen gas is absorbing heat to undergo a phase change.
B. A catalyst needs to be added to increase the amount of hydrogen produced.
C. No more hydrogen can be produced because all of the reactants have become products at this point.
D. It has reached the maximum amount of product it can make at this temperature. The temperature would need to increase to produce more.

Answers

Answer:

The answer is "Option C".

Explanation:

It's evident from the figure below that after thirty minutes, not no more hydrogen can be created because all of the reactants have converted into products.

hydrogen gas created in cm cubes per period x = 20 seconds, y = 45 centimeters squared, and so on.

A reaction's terminus (the graph's flat line) indicates that no further products are being created during the reaction.

A blow-dryer and a vacuum cleaner each operate with a voltage of 120 V. The current rating of the blow-dryer is 13 A, while that of the vacuum cleaner is 4.8 A. Determine the power consumed by (a) the blow-dryer and (b) the vacuum cleaner. (c) Determine the ratio of the energy used by the blow-dryer in 15 minutes to the energy used by the vacuum cleaner in 40 minutes.

Answers

Answer:

(a) 1560 W

(b) 576 W

(c) 1.01

Explanation:

Voltage, V = 120 V

Current in dryer, I = 13 A

current in vacuum cleaner, i' = 4.8 A

(a) Power consumed by dryer,

P = V I = 120 x 13 = 1560 W

(b) Power consumed by vacuum cleaner

P' = V I' = 120 x 4.8 = 576 W

(c) Energy consumed by dryer

E = P x t = 1560 x 15 x 60 = 1404000 J

Energy consumed by the vacuum cleaner

E' = P' x t' = 576 x 40 x 60 = 1382400 J

the ratio of energies is

E : E' = 1404000 : 1382400 = 1.01

A negative point charge q1 = 25 nC is located on the y axis at y = 0 and a positive point charge q2 = 10 nC is located at y =14 cm. Find the y coordinate of the points where the net electric potential due to these two charges is zero.

Answers

Answer:

 y = 0.1 m

Explanation:

The electrical power for point loads is

         V = [tex]k \sum \frac{q_i}{r_i}[/tex]k Sum qi / ri

in this case

         V = k ([tex]- \frac{q_1}{r_1 } + \frac{q_2}{r_2}[/tex])

indicate that V = 0

        [tex]\frac{q_1}{r_1} = \frac{q_2}{r_2}[/tex]

        r₂ = [tex]\frac{q_2}{q_1} r_1[/tex]

the distance r1 is

         r₁ = y -0

the distance r2

         r₂ = 0.14 -y

we substitute

       

        0.14 - y = [tex]\frac{10}{25}[/tex]  y

          y ( [tex]\frac{10}{25} + 1[/tex]) = 0.14

          y 1.4 = 0.14

          y = 0.14 / 1.4

          y = 0.1 m

An object moves in a direction parallel to its length with a velocity that approaches the velocity of light. The length of this object, as measured by a stationary observer:________

a. approaches infinity.
b. approaches zero.
c. increases slightly.
d. does not change.

Answers

Answer:

b. approaches zero.

Explanation:

The phenomenon is known as length contraction.

Length contraction is a result of Einstein's special theory of relativity. This theory states that an observer in an inertial frame of reference will observe a decrease in the length of any moving object placed at another inertial frame of reference.

let the length of the train = L

Let the length observed when the train is in motion = L₀

Apply Einstein's special theory of relativity;

[tex]L_0 = L \times \sqrt{1 - \frac{v^2}{c^2} } \\\\where;\\\\v \ is \ the \ velocity \ of \ the \ train\\\\c \ is \ the \ speed \ of \ light\\\\[/tex]

from the equation above, when v = 0, the length observed is equal to the initial length of the train. (L₀ = L)

As the velocity of the train (v) approaches the speed of light (c), the length of the train observed (L₀) becomes smaller than the initial length of the train (L).  (L₀ < L)

Eventually, when v equals c, we will have a square root of zero (0), and the length observed will become zero.  (L₀ = 0)

Thus, the length of this object, as measured by a stationary observer approaches zero

Define capacitance of a parallel plate capacitor and state one application of it in electric circuit?​

Answers

Answer:

The capacitance of a parallel plate capacitor is the quantity of charge the capacitor can hold.

This capacitance is proportional to the area of the any of the two plates (if the area of the plates are the same), or the smaller of the two plates (if the plates have different areas) and inversely proportional to the square of the distance of separation (or thickness of the dielectric material) between the plates. It is mathematically expressed as;

C = Aε₀ / d

Where;

C = capacitance

A = Area of one of the plates.

d = distance between the plates

Some of the applications of capacitance (or simply a capacitor) in an electric circuit are;

i. For storage of electrostatic energy.

ii. For filtering and tuning of circuits.

the current through a wire is measured as the potential difference is varied what is the wire resistance

Answers

Answer:

Resistance, R = 0.02 Ohms

Explanation:

Ohm's law states that at constant temperature, the current flowing in an electrical circuit is directly proportional to the voltage applied across the two points and inversely proportional to the resistance in the electrical circuit.

Mathematically, Ohm's law is given by the formula;

V = IR

Where;

V is the voltage or potential difference.

I is the current.

R is the resistance.

From the attachment, we would pick the following values on the graph of current against voltage;

Voltage, V = 0.5 V

Current = 25 A

To find resistance;

R = V/I

R = 0.5/2.5

Resistance, R = 0.02 Ohms

Note:

Resistance (R) is the inverse of slope i.e change in current with respect to change in voltage.

plz help me with hw A bus of mass 1000 kg moving with a speed of 90km/hr stops after 6 sec by applying brakes then calculate the distance travelled and amount of force applied.​

Answers

Answer:

Mass, M = 1000 kg

Speed, v = 90 km/h = 25 m/s

time, t = 6 sec.

Distance:

[tex]{ \tt{distance = speed \times time }} \\ { \tt{distance = 25 \times 6}} \\ { \tt{distance = 150 \: m}}[/tex]

Force:

[tex]{ \tt{force = mass \times acceleration}} \\ { \bf{but \: for \: acceleration : }} \\ from \: second \: equation \: of \: motion : \\ { \bf{s = ut + \frac{1}{2} {at}^{2} }} \\ \\ { \tt{150 = (0 \times 6) + ( \frac{1}{2} \times a \times {6}^{2} ) }} \\ \\ { \tt{acceleration = 8.33 \: {ms}^{ - 2} }} \\ \\ { \tt{force = 1000 \times 8.33}} \\ { \tt{force = 8333.3 \: newtons}}[/tex]

(b) If the object is at 330 feet and its instantaneous velocity is 3 feet per minute at 30 minutes, what is the approximate position of the object at 32 minutes

Answers

Answer:

The final position is 36 feet.

Explanation:

initial position, d = 330 feet

speed, v = 3 feet per minute

time, t = 30 minute

now the time is 32 minute

time interval = 2 minute

So, the distance in 2 minutes is

d' = 2 x 3 = 6 feet

So, the final position is

D = 30 + 6 = 36 feet

The acceleration vector of a particle in uniform circular motion:___________
a) points outward from the center of the circle.
b) points toward the center of the circle.
c) is zero.
d) points along the circular path of the particle and opposite the direction of motion.
e) points along the circular path of the particle and in the direction of motion.

Answers

(B)

Explanation:

Centripetal means "towards the center" so the acceleration vector of an object undergoing UCM is always pointed towards the center.

The acceleration vector of a particle in a uniform circular motion points toward the center of the circle, The correct option is option (b).

Centripetal force is the force acting on an object in curvilinear motion directed towards the axis of rotation or center of curvature. The unit of centripetal force is Newton.

Centripetal means "towards the center" so the acceleration vector of an object undergoing circular motion is always pointed towards the center.

Therefore, The acceleration vector of a particle in a uniform circular motion points toward the center of the circle, The correct option is option (b).

To know more about the Centripetal force:

https://brainly.com/question/31417673

#SPJ6

A spinning wheel having a mass of 20 kg and a diameter of 0.5 m is positioned to rotate about its vertical axis with a constant angular acceleration, a of 6 rad/s If the initial angular velocity is 1.5 rad/s, determine The maximum angular velocity and linear velocity of the wheel after 1 complete revolution.

Answers

Answer:

ωf = 8.8 rad/s

v = 2.2 m/s

Explanation:

We will use the third equation of motion to find the maximum angular velocity of the wheel:

[tex]2\alpha \theta = \omega_f^2 -\omega_I^2[/tex]

where,

α = angular acceleration = 6 rad/s²

θ = angular displacemnt = 1 rev = 2π rad

ωf = max. final angular velocity = ?

ωi = initial angular velocity = 1.5 rad/s

Therefore,

[tex]2(6\ rad/s^2)(2\pi\ rad)=\omega_f^2-(1.5\ rad/s)^2\\\omega_f^2=75.4\ rad/s^2+2.25\ rad/s^2\\\omega_f = \sqrt{77.65\ rad/s^2}[/tex]

ωf = 8.8 rad/s

Now, for linear velocity:

v = rω = (0.25 m)(8.8 rad/s)

v = 2.2 m/s

What bet force is required to stop a 2250 kg car if the decelerates at a rate of -4.3 m/s^2 please answer fast

Answers

Answer:

Force = Mass × Acceleration

[tex]{ \tt{force = 2250 \times 4.3}} \\ = { \tt{9675 \: newtons}}[/tex]

You are cooking breakfast for yourself and a friend using a 1,140-W waffle iron and a 510-W coffeepot. Usually, you operate these appliances from a 110-V outlet for 0.500 h each day. (a) At 12 cents per kWh, how much do you spend to cook breakfast during a 30.0 day period

Answers

Answer:

The cost is 297 cents.

Explanation:

Power of iron, P = 1140 W

Power of coffee pot, P' = 510 W

Voltage, V = 110 V

Time, t = 0.5 h each day

Cost = 12 cents per kWh

(a) Total energy

E = P x t + P' x t

E = 1140 x 0.5 x 60 x 60 + 510 x 0.5 x 60 x 60

E = 2052000 + 918000 = 2970000 J

1 kWh = 3.6 x 10^6 J

E = 0.825 kWh

For 30 days

E' = 0.825 x 30 = 24.75 kWh

So, the cost is

= 12 x 24.75 = 297 cents

A baseball pitcher brings his arm forward during a pitch, rotating the forearm about the elbow. If the velocity of the ball in the pitcher's hand is 34.0 m/s and the ball is 0.310 m from the elbow joint, what is the angular velocity (in rad/s) of the forearm

Answers

Answer:

[tex]\omega=109.67\ rad/s[/tex]

Explanation:

Given that,

The speed of the ball, u = 34 m/s

The ball is 0.310 m from the elbow joint.

We need to find the angular velocity (in rad/s) of the forearm.

We know that,

[tex]v=r\omega\\\\\omega=\dfrac{v}{r}\\\\\omega=\dfrac{34}{0.31}\\\\\omega=109.67\ rad/s[/tex]

So, the required angular velocity of the forearm is 109.67 rad/s.

A motorcycle daredevil jumps off a 33.0 ramp at 20.3 m/s. The landing ramp is at the same height, 28.0 m away. What is the height of the motorcycle when it reaches the landing ramp? (Unit = m)

Answers

The height of the motorcycle daredevil when it reaches the landing ramp is 4.93 m.

Since the ramp is a 33.0° ramp and the motorcycle daredevil jumps off with a speed of 20.3 m/s, the motorcycle dare devil has a horizontal component of speed u = 20.3cos33.0° m/s and a vertical component of speed v = 20.3sin33.0° m/s.

Now, since the other ramp is d = 28.0 m away, it takes the time it takes the motorcycle dare devil to reach it is t.

Considering motion in the horizontal direction, d = ut.

Thus, t = d/u

= 28.0 m/20.3cos33.0° m/s

= 28.0 m/(20.3 × 0.8387) m/s

= 28.0 m/17.025 m/s

= 1.645 s

Let h be the height of the motorcycle daredevil when it reaches the landing ramp in time, t.

Considering the vertical motion and using h = vt - 1/2gt² where v = vertical velocity of motorcycle daredevil = 20.3sin33.0°, t = time taken to reach landing ramp = 1.645 s and g = acceleration due to gravity = 9.8 m/s² (Note that there is a negative in front of g since it is directed downwards)

So, substituting the values of the variables into the equation, we have

h = vt - 1/2gt²

h = 20.3sin33.0° m/s × 1.645 s - 1/2 × 9.8 m/s² × (1.645 s)²  

h = 20.3 × 0.5446 m/s × 1.645 s - 1/2 × 9.8 m/s² × 2.706025 s²

h = 18.187 m - 1/2 × 26.519 m

h = 18.187 m - 13.26 m

h = 4.927

h4.93 m

So, the height of the motorcycle daredevil when it reaches the landing ramp is 4.93 m.

Learn more about ramps here:

https://brainly.com/question/20113308

A wire carrying a 30.0-A current passes between the poles of a strong magnet that is perpendicular to its field and experiences a 2.15-N force on the 4.00 cm of wire in the field. What is the average field strenth?

Answers

Answer:

1.79 T

Explanation:

Applying,

F = BILsin∅................ Equation 1

Where F = Force, B = magnetic field, I = current flowing through the wire, L = length of the wire, ∅ = angle between the magntic field and the force

make B the subject of the equation

B = F/ILsin∅............. Equation 2

From the question,

Given: F = 2.15 N, I = 30 A, L = 4.00 cm = 0.04 m, ∅ = 90° (perpendicular to the field)

Substitute these values into equation 2

B = 2.15/(30×0.04×sin90°)

B = 2.15/1.2

B = 1.79 T

Hence the average field strength is 1.79 T

A horizontail rod (oriented in the east -west direction) is moved northward at a constant velocity through a magnetic field that points straight down. Make a statement concerning the potential induced across the rod.
A) The east end of the rod is at higher potential than the west end.
B) The bottom surface of the rod is at higher potential than the top surface.
C) The top surface of the rod is at higher potential than the bottom surface.
D) The west end of the rod is at higher potential than the east end.
E) The potential is uniform.

Answers

Answer:

a

Explanation:

friction between two flat surfaces can be divided into two categories. what are the two most common kinds of friction?

Answers

Answer:

kinetic and static

Explanation:

hope it helps! ^w^

Other Questions
8. A mass of 10 Kg is accelerating at 3 m/s2. What is the applied net force? A 45g Aluminum spoon (specific heat 0.88J/g degree Celcius) at 24 degrees Celcius placed in 180ml(180g) of coffee at 85 degrees Celcius and the temperature of the two become equal. What is the final temperature? Margaret bought a video game, her father gave her 0.2 of the money, her aunt gave 0.5 of the money and she saved the rest. She saved $168 so what amt of money did her father give The scale on a map is 1 inch = 10 miles.What is the distance, in inches, on the mapbetween two towns that are m miles apart?F.m/10G. M/5H.5mJ.10mK.m+10 Make a list of advices given by your elders which you always follow. Any significant quotes from the novel book thief with page number included please??? I'm very in need ! summer school is over, and I'm feeling self-destructive. Take all of my points and have a good night. 3/3 This is for geometry, please help ASAP A swimming pool has 143 gallons of water in it. The swimming pool drains at a rate of 8 gallons per minute. How much water is in the swimming pool after 11 minutes?How much water does the swimming pool have after 11 minutes? Solve on paper, then enter your answer on Zearn.The swimming pool has gallons of water after 11 minutes. Importance of alternative source of energy? In a mid-size company, the distribution of the number of phone calls answered each day by each of the 12 receptionists is bell-shaped and has a mean of 43 and a standard deviation of 8. Using the empirical rule (as presented in the book), what is the approximate percentage of daily phone calls numbering between 19 and 67 Which evils of modern society does Mr. Diamond cite as evidence that the Neolithic Revolution was a negative event in the history of mankind? As a skydiver accelerates downward, what force increases? A. Gravity B. Thrust C. Air resistance D. Centripetal What is the domain of the function graphed below? Please help me anyone A steep mountain is inclined 75 degree to the horizontal and rises 3900 ft above the surrounding plain. A cable car is to be installed by connecting a cable from the top of the mountain to a spot on the plain that is 910 ft from the base of the mountain. Find the shortest length of cable needed. The Underground Railroad was _____________.a.an illegal abolitionists newspaperc.a railroad used by slaves to escapeb.a subway system operated by African American conductorsd.a series of safe houses harboring runaway slaves on their journey northPlease select the best answer from the choices providedABCD Find the APR, rounded to the nearest tenth of a percent (one decimal place) for the loan. Purchase a living room set for $4,900 at 8% add-on interest for 4 years. Enter only the number without % sign. An analyst has decided to identify value stocks for investment by screening for companies with high book-to-market ratios and high dividend yields. A potential drawback of using these screens to find value stocks is that the firms selected may: be those that have significantly underperformed the market. be concentrated in specific industries. have unsustainable dividend payments. this is the question hope u can solve it