Answer:
P = 6.63 kW
Explanation:
Given that,
Current, I = 260 A
Voltage of the battery, V = 25.5 V
We need to find the power supplied to the starter motor. We know that,
P = VI
Put all the values,
P = 25.5 × 260
P = 6630 W
or
P = 6.63 kW
So, the power supplied to the motor is 6.63 kW.
Answer:
The power is 6.63 kW.
Explanation:
Current, I = 260 A
Voltage, V = 25.5 V
Power of an electrical appliance is given by
P = V I
P = 25.5 x 260
P = 6630 W
1 kW = 1000 W
So, the power is
P = 6.63 kW
Four toy racecars are racing along a circular race track. The cars start at the 3-o'clock position and travel CCW along the track. Car A is constantly 2 feet from the center of the race track and travels at a constant speed. The angle Car A sweeps out increases at a constant rate of 1 radian per second.
Required:
How many radians θ does car A sweep out in t seconds?
Answer:
in t seconds, Car A sweep out t radian { i.e θ = t radian }
Explanation:
Given the data in the question;
4 toy racecars are racing along a circular race track.
They all start at 3 o'clock position and moved CCW
Car A is constantly 2 feet from the center of the race track and moves at a constant speed
so maximum distance from the center = 2 ft
The angle Car A sweeps out increases at a constant rate of 1 radian per second.
Rate of change of angle = dθ/dt = 1
Now,
since dθ/dt = 1
Hence θ = t + C
where C is the constant of integration
so at t = 0, θ = 0, the value of C will be 0.
Hence, θ = t radian
Therefore, in t seconds, Car A sweep out t radian { i.e θ = t radian }
collisions may take place between
Answer:
Collisions may take place between the reactants.
Explanation:
The collision frequency must be greater than the frequency factor for the reaction. A collision between the reactants must occur.
uppose that 3 J of work is needed to stretch a spring from its natural length of 32 cm to a length of 49 cm. (a) How much work (in J) is needed to stretch the spring from 37 cm to 45 cm
Answer:
0.113 J
Explanation:
Applying,
w = ke²/2................. Equation 1
Where w = workdone in stretching the spring, k = spring constant, e = extension
make k the subject of the equation
k = 2w/e²................ Equation 2
From the question,
Given: w = 3 J, e = 49-32 = 17 cm = 0.17 m
Substitute these values into equation 2
k = (2×3)/0.17²
k = 6/0.17
k = 35.29 N/m
(a) if the spring from 37 cm to 45 cm,
Then,
w = ke²/2
Given: e = 45-37 = 8 cm = 0.08
w = 35.29(0.08²)/2
w = 0.113 J
You are on an airplane that is landing. The plane in front of your plane blows a tire. The pilot of your plane is advised to abort the landing, so he pulls up, moving in a semicircular upward-bending path. The path has a radius of 450 m with a radial acceleration of 17 m/s^2.
Required:
What is the plane's speed?
Answer:
v = 87.46 m/s
Explanation:
The radial acceleration is the centripetal acceleration, whose formula is given as:
[tex]a_c = \frac{v^2}{r}[/tex]
where,
[tex]a_c[/tex] = centripetal acceleration = 17 m/s²
v = planes's speed = ?
r = radius of path = 450 m
Therefore,
[tex]17\ m/s^2 = \frac{v^2}{450\ m}\\\\v^2 = (17\ m/s^2)(450\ m)\\\\v = \sqrt{7650\ m^2/s^2}[/tex]
v = 87.46 m/s
A 165-km-long high-voltage transmission line 2.00 cm in diameter carries a steady current of 1,015 A. If the conductor is copper with a free charge density of 8.50 1028 electrons per cubic meter, how many years does it take one electron to travel the full length of the cable?
Answer:
22.1 years
Explanation:
Since the current in the wire is I = nevA where n = electron density = 8.50 × 10²⁸ electrons/cm³ × 10⁶ cm³/m³= 8.50 × 10³⁴ electrons/m³, e = electron charge = 1.602 × 10⁻¹⁹ C, v = drift velocity of electrons and A = cross-sectional area of wire = πd²/4 where d = diameter of wire = 2.00 cm = 2 × 10⁻² m
Making v subject of the formula, we have
v = I/neA
So, v = I/neπd²/4
v = 4I/neπd²
Since I = 1,015 A, substituting the values of the other variables into the equation, we have
v = 4I/neπd²
v = 4(1,015 A)/[8.50 × 10³⁴ electrons/m³ × 1.602 × 10⁻¹⁹ C × π ×(2 × 10⁻² m)²]
v = 4(1,015 A)/[8.50 × 10³⁴ electrons/m³ × 1.602 × 10⁻¹⁹ C × π × 4 × 10⁻⁴ m²]
v = (1,015 A)/[42.779 × 10¹¹ electronsC/m]
v = 23.73 × 10⁻¹¹ m/s
v = 2.373 × 10⁻¹⁰ m/s
Since distance d = speed, v × time, t
d = vt
So, the time it takes one electron to travel the full length of the cable is t = d/v
Since d = distance moved by free charge = length of transmission line = 165 km = 165 × 10³ m and v = drift velocity of charge = 2.373 × 10⁻¹⁰ m/s
t = 165 × 10³ m/2.373 × 10⁻¹⁰ m/s
t = 69.54 × 10⁷ s
t = 6.954 × 10⁸ s
Since we have 365 × 24 hr/day × 60 min/hr × 60 s/min = 31536000 s in a year = 3.1536 × 10⁷ s
So, 6.954 × 10⁸ s = 6.954 × 10⁸ s × 1yr/3.1536 × 10⁷ s = 2.21 × 10 yrs = 22.1 years
It will take one electron 22.1 years to travel the full length of the cable
A 55 g soapstone cube--a whisky stone--is used to chill a glass of whisky. Soapstone has a density of 3000 kg/m3, whisky a density of 940 kg/m3. What is the approximate normal force of the bottom of the glass on a single stone?
Answer:
[tex]N=0.37N[/tex]
Explanation:
Mass [tex]m=55g=>0.055kg[/tex]
Soapstone Density [tex]\rho_s=3000kg/m^2[/tex]
Whisky Density [tex]\rho_w=940kg/m^2[/tex]
Generally the equation for Force is mathematically given by
[tex]F=U+N[/tex]
Therefore
[tex]N=m*g-(\frac{m}{\rho_s})*\rho_w*g[/tex]
[tex]N=0.055*9.81 - {(\frac{0.055}{3000})*940*9.81}[/tex]
[tex]N=0.37N[/tex]
If an object, initially at rest, accelerates at the rate of 25m/s2, what will the magnitude of the displacement be after 50s
Answer:
31250 meters
Explanation:
Given data
Intitially at rest, the velocity will be
u= 0m/s
acceleration a= 25m/s^2
Time= 50s
We know that the expression for the displacement is given as
S=U+ 1/2at^2
S= 0+ 1/2*25*50^2
S= 12.5*2500
S=31250 meters
Hence the displacement is 31250 meters
2. g A spring extends by 20 cm when a force of 2 N is applied. What is the value of the spring constant in N/m
10N/m
Explanation:
f=kx
k=f/x
k=20N/0.2m
k=10N/m
Alice and Tom dive from an overhang into the lake below. Tom simply drops straight down from the edge, but Alice takes a running start and jumps with an initial horizontal velocity of 25 m/s. Neither person experiences any significant air resistance. Compare the time it takes each of them to reach the lake below.
a. Alice reaches the surface of the lake first
b. Tom reaches the surface of the lake first
c. Alice and Tom will reach the surface of the lake at the same time.
a certain projetor uses a concave mirror for projecting an object's image on a screen .it produces on image that is 4 times bigger than the object and the screen is 5 m away from the mirror as shown in fig 5.2, calculate the focal length of the mirror.
Answer:
f = 1 m
Explanation:
The magnification of the lens is given by the formula:
[tex]M = \frac{q}{p}[/tex]
where,
M = Magnification = 4
q = image distance = 5 m
p = object distance = ?
Therefore,
[tex]4 = \frac{5\ m}{p}\\\\p = \frac{5\ m}{4}\\\\p = 1.25\ m[/tex]
Now using thin lens formula:
[tex]\frac{1}{f}=\frac{1}{p}+\frac{1}{q}\\\\\frac{1}{f} = \frac{1}{1.25\ m}+\frac{1}{5\ m}\\\\\frac{1}{f} = 1\ m^{-1}\\\\[/tex]
f = 1 m
A 0.20 mass on a horizontal spring is pulled back a certain distance and released. The maximum speed of the mass is measured to be 0.20 . If, instead, a 0.40 mass were used in this same experiment, choose the correct value for the maximum speed.
a. 0.40 m/s.
b. 0.20 m/s.
c. 0.28 m/s.
d. 0.14 m/s.
e. 0.10 m/s.
Answer:
d
Explanation:
Ya gon find the Kenitic Energy first
K=½mv²===> K=½×0.2×(0.2)²===> 0.1(0.04)===> 0.004
and now the replacement:
0.004=½×0.4V²====> v²=0.02===> V=0.14m/s
PLEASE HELP ME WITH THIS ONE QUESTION
What is the rest energy of a proton? (c = 2.9979 x 10^9 m/s, mp = 1.6726 x 10^-27)
Answer:
multiply mp and c^2
Explanation:
e=mc^2
1. A message signal m(t) has a bandwidth of 5kHz and a peak magnitude of 2V. Estimate the bandwidth of the signal u(t) obtained when m(t) frequency modulates a carrier with a) kf = 10 Hz/V, b) kf = 100 Hz/V, and c) kf = 1000 Hz/V.
Answer:
3v at 5.3 herts
Explanation:
vector A has a magnitude of 8 unit make an angle of 45° with posetive x axis vector B also has the same magnitude of 8 unit along negative x axis find the magnitude of A+B?
Answer:
45 × 8 units = A + B as formular
If you change the motor in your vehicle you need to notify the DMV within ____,
days of this change.
-20
-25
-10
-15
when you change your motor on your vehicle you need to notify the DMV within 10 days
If you change the motor in your vehicle you need to notify the DMV within 10 days of this change.
An engine or motorAn engine or motor is a machine designed to convert one or more forms of energy into mechanical energy.
Available energy sources include potential energy (e.g. energy of the Earth's gravitational field as exploited in hydroelectric power generation), heat energy (e.g. geothermal), chemical energy, electric potential, and nuclear energy (from nuclear fission or nuclear fusion). Many of these processes generate heat as an intermediate energy form, so heat engines have special importance. Some natural processes, such as atmospheric convection cells convert environmental heat into motion (e.g. in the form of rising air currents). Mechanical energy is of particular importance in transportation but also plays a role in many industrial processes such as cutting, grinding, crushing, and mixing.
Mechanical heat engines convert heat into work via various thermodynamic processes. The internal combustion engine is perhaps the most common example of a mechanical heat engine, in which heat from the combustion of fuel causes rapid pressurization of the gaseous combustion products in the combustion chamber, causing them to expand and drive a piston, which turns a crankshaft. Unlike internal combustion engines, a reaction engine (such as a jet engine) produces thrust by expelling reaction mass, by Newton's third law of motion.
Learn more about motor
https://brainly.com/question/8954449
#SPJ2
Suppose a van de Graaff generator builds a negative static charge, and a grounded conductor is placed near enough to it so that a 7.0 mu C of negative charge arcs to the conductor. Calculate the number of electrons that are transferred.
Answer:
# _electron = 4.375 10¹³ electrons
Explanation:
In this exercise it is indicated that 7.1 μC is transferred, let's use a direct ratio or rule of three. If an electron has a charge of 1.6 10⁻¹⁹ C, how many electrons have a charge of 7.0 10⁻⁶ C
# _electron = 7.0 10⁻⁶ C (1 electron / 1.6 10⁻¹⁹ C)
# _electron = 4.375 10¹³ electrons
Why are objects measured?
In order to find out how long/wide/heavy/high/dense/deep/ massive/voluminous/reflective/opaque/ tansparent/warm/cold/hard/soft/ malleable/flexible/rigid/radioactive/old/ valuable/symmetrical/flat/regular/ irregular they are.
In a way that you can easily and conveniently describe to other people.
A mass attached to the end of a spring is oscillating with a period of 2.25 s on a horizontal frictionless surface. The mass was released from rest at
t = 0
from the position
x = 0.0480 m.
Determine the location of the mass at
t = 5.85 s?
Answer:
[tex]X=0.0389m[/tex]
Explanation:
From the question we are told that:
Period of spring [tex]T_s=2.25s[/tex]
Initial Position of Mass [tex]x=0.0480m[/tex]
Final Mass period [tex]T_f=5.85s[/tex]
Generally the equation for the Mass location is mathematically given by
[tex]X=xcos*\frac{2\pi T_s}{T_f}[/tex]
[tex]X=0.048*cos*\frac{2\pi 5.85}{2.25}[/tex]
[tex]X=0.0389m[/tex]
3
Select the correct answer.
What is a substance?
Answer:
physical material from which something is made or which has discrete existence
Explanation:
A 100-m long transmission cable is suspended between two towers. If the mass density is 18.2 g/cm and the tension in the cable is 6543 N, what is the speed (m/s2) of transverse waves on the cable
the Period T of oscillation of a Single Pendulum depends on the length l, and acceleration g. Determine the exact form of the dependence.
Answer:
[tex]{ \tt{check \: in \: the \: pic}}[/tex]
how can scientific method solve real world problems examples
Upon completing an interview, it is important that you send a follow-up thank you
note/letter/e-mail because it will show that you are a person who appreciates an opportunity.
A True
B
False
Two speakers in a stereo emit identical pure tones. As you move around in front of the speakers, you hear the sound alternating between loud and zero. This occurs because of
Answer:
Interference
Explanation:
When two traveling waves traveling waves along the same path are superimposed(combine). The superimposition of these two waves results in the production of a resultant wave which is defined by the net effect of the two waves. Wave interference occurs most types of waves including radio wave, light, acoustic waves and other wave types. Alternating sound between loud and Zero is heard as the two speakers emit identical pure tones because the resultant amplitude after the interference of the two sound waves is the vector sum of each of their amplitudes. A loud sound is heard, when the crest of both waves meets each other and a zero is heard if the crest of one meets the trough of the other as they cancel out.
Two positive charges, 91 = 5 x 10-'[C] and q2 =1 x 10-9 [C], are
separated by a distance of d=0.05 m. At location 'P' between the
two charges, the net electric field is found to be zero.
b. [10 points] The distance between charge qı and location 'P' is
considered to be 'x'. Find the value of 'x' in [cm]
Answer:
wareffctgggyyggghhhh
A closely wound, circular coil with radius 2.70 cm has 800 turns. What must the current in the coil be if the magnetic field at the center of the coil is 0.0750 T
Answer:
Approximately 4.029 A
Explanation:
We can use the formula that the B field of a few loops all with current in same direction is permeability of free space (mu)* current * Number or loops divided by 2*radius. You are given B field, radius(convert into meters), number of loops and mu is 4pi * 10^-7. Solve for current and you get 4.029 Amperes.
A ball has a mass of 4.65kg and approximates a ping pong ball of mass 0.060kg that is at rest by striking it in an elastic collision. The initial velocity of the bowling ball is 5.00m/s, determine the final velocities of both masses after the collision.
Answer:
Look at work
Explanation:
Elastic Collision: Ki=Kf
M1=4.65kg
M2: 0.060kg
v1=5m/s
v2=0m/s
4.65*5+0.060*0=4.65*v1'+0.060*v2'
23.25+0=4.65v1'+0.060v2'
Also since it is an elastic collision we can use
v1+v1'=v2+v2'
4.65+v1'=v2'
4.65+v1'=v2'
Substitute into the earlier equation
23.25=4.65v1'+0.060(4.65+v1')
Expand
23.25=4.65v1'+0.279+0.06v1'
Solve for v1'
22.971=4.71v1'
v1'=4.88m/s
v2'=4.65+4.88=9.53m/s
A 0.495-kg hockey puck, moving east with a speed of 4.50 m/s , has a head-on collision with a 0.720-kg puck initially at rest. Assuming a perfectly elastic collision, what will be the speed (magnitude of the velocity) of each object after the collision?
Answer:
a) [tex]v_1=-0.833m/s[/tex]
b) [tex]V_2=12.5m/s[/tex]
Explanation:
From the question we are told that:
Hockey puck Mass [tex]m_1=0.495kg[/tex]
Hockey puck Speed [tex]u_1=4.50m/s[/tex]
Puck Mass [tex]m_2=0.720kg[/tex]
Assuming
Initial speed of Puck [tex]u_2=0[/tex]
Generally the equation for Speed of First Puck is mathematically given by
[tex]v_1=(\frac{m_1-m_2}{m_1+m_2})*v_1+(\frac{2m_2}{m_1+m_2})u_2[/tex]
[tex]v_1=(\frac{0.495-0.720}{0.495+0.720})*4.50+0[/tex]
[tex]v_1=-0.833m/s[/tex]
Generally the equation for Speed of Second Puck is mathematically given by
[tex]V_2=(\frac{2m_1}{m_1+m_2})u_2-(\frac{m_1-m_2}{m_1+m_2})v[/tex]
[tex]V_2=(\frac{2*0.495}{0.495*0.720})*4.50-0[/tex]
[tex]V_2=12.5m/s[/tex]
A 9.0 V battery is connected across two resistors in series. If the resistors have resistances of and what is the voltage drop across the resistor?
Select one:
A. 4.6 V B. 9.4 V C. 8.6 V D. 4.4 V
Answer:
the answer to the question is known as D
A 10-cm-long spring is attached to the ceiling. When a 2.0 kg mass is hung from it, the spring stretches to a length of 15 cm.What is the spring constant k?How long is the spring when a 4.0 kg mass is suspended from it?
As the spring is stretched, it exerts an upward restoring force f. At maximum extension, Newton's second law gives
∑ F = f - mg = 0 ==> f = (2.0 kg) (9.8 m/s²) = 19.6 N
By Hooke's law, if k is the spring constant, then
f = kx ==> k = f/x = (19.6 N) / (0.15 m) ≈ 130 N/m
A 4.0 kg mass would cause the spring to exert a force of
f = (4.0 kg) (9.8 m/s²) = 39.2 N
which would result in the spring stretching a distance x such that
39.2 N = (130 N/m) x ==> x = (39.2 N) / (130 N/m) ≈ 0.30 m ≈ 30 cm
