What type of material does not transfer heat well?

What Type Of Material Does Not Transfer Heat Well?

Answers

Answer 1
Insulators such as wood

Related Questions

Which of the following is NOT a type of wave?
a.
deep-water wave
c.
shallow-water wave
b.
open wave
d.
storm surge


Please select the best answer from the choices provided

A
B
C
D

Answers

Answer:

I think deep-water wave is not a wave

Explanation:

but it will be better if u wait for the second answer as I am not sure

Shallow water wave is not a type of wave. Thus, the correct option is C.

What is a Wave?

A wave is a disturbance in a medium which carries energy without a net movement of particles in the medium. A wave may take the form of elastic deformation, it is a variation of pressure, electric or the magnetic intensity, electric potential, or the temperature of the medium.

Shallow water waves take place in the shallow water, this means that the waves which occur at depths that is shallower than the wavelength of the wave divided by 20. This would mean that a wave with a wavelength of about 60 meters is a shallow water wave at depth range of less than 60 divided by 20, or 3 meters.

Therefore, the correct option is C.

Learn more about Wave here:

https://brainly.com/question/3639648

#SPJ2

why a person feel weightlessness in a spacecraft orbiting around a heavenly body​

Answers

Answer:

The orbital velocity an aircraft orbiting around a heavenly body is found as follows;

At the orbital velocity, [tex]F_G[/tex] = [tex]F_C[/tex]

Where;

[tex]F_G[/tex] = The gravitational force = [tex]\dfrac{G \cdot M \cdot m}{R_E^2}[/tex]

[tex]F_C[/tex] = The centripetal force = [tex]\dfrac{m \cdot v_0^2}{R_E}[/tex]

Therefore

[tex]v_0 = \sqrt{\dfrac{G \cdot M}{R_E} }[/tex]

Therefore, at the orbital velocity of the spacecraft, the centripetal force attracting the person away from the central region heavenly body is equal to the gravitational force pulling the person towards the center of the heavenly body (which was felt as her or his weight), and the person feels weightless while inside the orbiting spacecraft

Explanation:

(This is for other people with this Question i hope you find this when you need help) Need answer for this Help!!!
Question 7 of 20 You plan to use a slingshot to launch a ball that has a mass of 0.025 kg. You want the ball to accelerate straight toward your target at 19 m/s2. How much force do you need to apply to the ball? O A. 19.03 N OB. 0.48 N O C. 4.51 N D. 760.00 N​

Answers

Answer:

0.48N

Explanation:

according to the second law of motion

force=mass×acceleration

the mass in this question is 0.025,the acceleration 19

therefore f=0.025×19

=0.48N

I hope this helps

In a Rutherford scattering experiment, alpha parti- cles having kinetic energy of 7.70 MeV are fired toward a gold nucleus that remains at rest during the collision. The alpha particles come as close as 29.5 fm to the gold nucleus before turning around. (a) Calculate the de Broglie wave- length for the 7.70-MeV alpha particle and compare it with the distance of closest approach, 29.5 fm. (b) Based on this comparison, why is it proper to treat the alpha particle as a particle and not as a wave in the Rutherford scattering experiment

Answers

(a) The de Broglie wavelength is approximately 5.175 × 10⁻¹⁵  meters. The wavelength is lesser than the distance of closest approach

(b) It is proper to treat the alpha particle as a particle and not as wave because the distance of closest approach is much larger than and not comparable to its wavelength for the alpha particle for the alpha particle to be treated as a wave

The given parameters are;

The kinetic energy of the alpha particles = 7.70 MeV = 1.23368 × 10⁻¹² J

The distance from the gold nucleus the alpha particles reach = 29.5 fm

(a) The de Broglie wavelength of a particle is given as follows;

[tex]\mathbf{\lambda = \dfrac{h}{p}}[/tex]

Where;

λ = The wavelength

h = Planck's constant = 6.62607004 × 10⁻³⁴ m²·kg/s

p = The momentum of the particle = Mass of an electron, m × Velocity, v

The mass of an alpha particle, m ≈ 6.645 × 10⁻²⁷ kg

Therefore;

[tex]\lambda = \dfrac{h}{m \times v}[/tex]

The kinetic energy of the alpha particle, K.E. = (1/2)·m·v²

∴ v = √(2 × K.E./m)

Therefore;

[tex]\lambda = \dfrac{h}{m \times \sqrt{2 \times \dfrac{K.E.}{m} } } = \dfrac{h}{ \sqrt{2 \times m \times K.E.} }[/tex]

Plugging in the values of the variables gives;

[tex]\lambda = \dfrac{6.62607004 \times 10 ^{-34} }{ \sqrt{2 \times 6.645 \times 10 ^{-27} \times 1.23368 \times 10^{-12} } } \approx 5.175 \times 10^{-15}[/tex]

The de Broglie wavelength of the alpha particle, λ ≈ 5.175 × 10⁻¹⁵ m

The distance of closest approach = 29.5 fm = 29.5 × 10⁻¹⁵ m

Compared to the distance of closest approach, the wavelength of the alpha particle is lesser than the distance of closest approach

(b)  Given that the distance of closest approach is six times larger than the wavelength of the alpha particle, and alpha particle behaving as waves are expected to approach closer to the gold nucleus in the region of their wavelength before deflection, therefore, the larger distance of closest approach is indicative of a charged particle to charged particle interaction, and therefore, particle behavior of alpha particles.

Learn more about de Broglie wavelength, particles and wave behavior of radiation here;

https://brainly.com/question/22471405

https://brainly.com/question/17403491

https://brainly.com/question/15128575

Hydroplaning causes your front wheels to actually leave the pavement and the wheels are riding on a thin layer of water. This lack of traction with the pavement takes away your control of the vehicle. To regain control of your vehicle you should___________.

Answers

Answer: Remove your foot from the gas pedal and slow down

Explanation:

Hydroplaning also refers to aquaplaning and this refers to the scenario whereby there's a layer of water that builds between the tyres of a car and the surface of the road which then brings about a loss of traction which eventually leads to a situation whereby the car doesn't respond to control inputs.

This lack of traction with the pavement takes away your control of the vehicle and to regain control of the vehicle, one should remove your foot from the gas pedal and slow down.

Maya and Kenzie are discussing oil spills and how they impact the environment. How can humans help reduce the impact of oil spills?

Answers

Answer:

Using physical and chemical clean up methods to remove the oil

Explanation:

An astronaut on Pluto attaches a small brass ball to a 1.00-m length of string and makes a simple pendulum. She times 10 complete swings in a time of 257 seconds. From this measurement she calculates the acceleration due to gravity on Pluto. What is her result

Answers

Answer:

The acceleration due to gravity at Pluto is 0.0597 m/s^2.

Explanation:

Length, L = 1 m

10 oscillations in 257 seconds

Time period, T = 257/10 = 25.7 s

Let the acceleration due to gravity is g.

Use the formula of time period of simple pendulum

[tex]T = 2\pi\sqrt{\frac{L}{g}}\\\\25.7 = 2 \times 31.4\sqrt{\frac{1}{g}}\\\\g = 0.0597 m/s^2[/tex]

I need help asap please​

Answers

Answer:

I dont know answer Sorry For that thank u

when a .... cause an object to move through a ...., the .... on the object

Answers

Explanation:

velocity - the speed with a direction. Thus, inertia could be redefined as follows: Inertia: tendency of an object to resist changes in its velocity. ... Such an object will not change its state of motion (i.e., velocity) unless acted upon by an unbalanced force.

b. The role of the moon is greater than that of the sun in the occurrence of tides. ???​

Answers

Our sun is 27 million times larger than our moon. Based on its mass, the sun's gravitational attraction to the Earth is more than 177 times greater than that of the moon to the Earth. If tidal forces were based solely on comparative masses, the sun should have a tide-generating force that is 27 million times greater than that of the moon. However, the sun is 390 times further from the Earth than is the moon. Thus, its tide-generating force is reduced by 3903, or about 59 million times less than the moon. Because of these conditions, the sun’s tide-generating force is about half that of the moon.

Câu 1. Con lắc lò xo treo thẳng đứng, dao động điều hòa với biên độ 2cm và tần số góc 20 rad/s. Chiều dài tự nhiên của lò xo là 30cm. Chiều dài nhỏ nhất và lớn nhất của lò xo trong quá trình dao động là bao nhiêu? Lấy g = 10m/s2.

Answers

Answer:

28 cm and 32 cm

Explanation:

1. The spring pendulum hangs vertically, oscillates harmonic with amplitude 2cm and angular frequency 20 rad/s. The natural length of

a spring is 30cm. What is the minimum and maximum length of the spring during the oscillation? Take g = 10m/s2.

As the amplitude is 2 cm and the natural length is 30 cm. So, it oscillates between 30 -2 = 28 cm to 30 + 2 = 32 cm.

So, the minimum length is 28 cm and the maximum length is 32 cm.

Which of the following changes would not lead to changes in the efficiency of
a heat engine?
A. Doubling the work done while keeping the heat flow into the
engine the same
B. Doubling the heat flow into the engine while halving the work done
C. Doubling both the work done and the heat flow into the engine
D. Doubling the heat flow into the engine while keeping the work
done the same

Answers

Explanation:

B. Doubling the heat flow into the engine while halving the work done

hope this helps you

have a nice day

At the end of an investigation, you must__________ ____________. Your results may or may not support your hypothesis.​

Answers

Answer:

could and largejsjisj and we look like they can get to

Using a fixed 20 V from the power source and three lightbulbs that have the same resistance, how would you design a circuit that would allow at least one bulb to use maximum power (have maximum brightness)?

Answers

Answer:

check photo

Explanation:

We should connect the three bulbs in parallel in order to allow at least one bulb to use maximum power.

We have a 20 V power source and three lightbulbs that have the same resistance.

We have to design a circuit that would allow at least one bulb to use maximum power.

What is the total resistance of the circuit if three resistances each of of resistance R(1), R(2) and R(3) are connected in parallel ?

For parallel combination of resistances, the total resistance will be -

[tex]\frac{1}{R_{T} } =\frac{1}{R(1)} +\frac{1}{R(2)} +\frac{1}{R(3)} \\[/tex]

We know that the power dissipated by the resistance is equal to -

P = V x I = [tex]I^{2} R[/tex] = [tex]\frac{V^{2} }{R}[/tex]

Let the three bulbs be B(1), B(2) and B(3) each with resistance ' R '. In parallel combination of the bulbs, the voltage across each bulb will be same as that of power source -

V [B(1)] = V [B(2)] = V [B(3)] = 20 V

Therefore, the power used by each bulb will be -

P [B(1)] = P [B(2)] = P [B(3)]  = [tex]\frac{20\times 20}{R}=\frac{400}{R}[/tex]

Whereas, in series combination the voltage drop will regularly take place after the current passes through a resistor.

Hence, we should connect the three bulbs in parallel in order to allow at least one bulb to use maximum power.

To solve more question on Power use, visit the link below -

https://brainly.com/question/22103646

#SPJ2

An electromagnetic wave has a frequency of 6.0 x 10^18 Hz. What is the
wavelength of the wave? Use the equation 2 = and the speed of light as 3.0
x 108 m/s.

Answers

Answer:

Wavelength = 5 * 10^{-11} meters

Explanation:

Given the following data;

Frequency = 6.0 x 10^18 Hz

Speed = 3 * 10⁸ m/s

To find the wavelength of the wave;

Mathematically, the wavelength of a wave is given by the formula;

[tex] Wavelength = \frac {speed}{frequency} [/tex]

Substituting into the formula, we have;

[tex] Wavelength = \frac {3 * 10^{8}}{6.0 x 10^{18}} [/tex]

Wavelength = 5 * 10^{-11} meters

Write any three importance of Measurement.

Stay Safe,Stay Healthy and Stay Happy ​

Please answer me this question fast, PLEASE

Answers

Explanation:

The three importance of measurement are as follows :-

measurement is used to compare the items when barter system takes place .measurement helps in weighing the foods , groceries etc .Measurement are important in laboratory when there experiments is being taken for different purposes .

Hope it is helpful to you

✌️✌️✌️✌️✌️✌️✌️

A scientist measures the light from a distant star
at 525 nm. The constant for Wien's
displacement law is 2.9 x 10-3 m K. What is the
approximate temperature of the star in Kelvins?
A) 1500 K
B) 180,000 K
C) 1.5 K
D) 5500 K

Answers

The approximate temperature of the star as determined is D) 5500 K.

The Wien's displacement law relates the maximum wavelength of a body to its absolute temperature. Wien's displacement law states that:

λ = [tex]\frac{b}{T}[/tex]

where λ is the maximum wavelength of the body, b is the constant of proportionality and T is the absolute temperature.

Thus from the given question, λ = 525 nm (525 x [tex]10^{-9}[/tex]), and b = 2.9 x [tex]10^{-3}[/tex] mK.

So that,

525 x [tex]10^{-9}[/tex] = [tex]\frac{2.9*10^{-3} }{T}[/tex]

Make T the subject of the formula to have;

T = [tex]\frac{2.9*10^{-3} }{525*10^{-9} }[/tex]

  = 5523.81

T = 5523.81 K

T ≅ 5500.00 K

The approximate temperature of the star in Kelvin is 5500 K.

For more clarifications, kindly visit: https://brainly.com/question/20038918

A force of 10 N is making an angle of 30° with the horizontal. Its horizontal component will be:
A. 4N
B. 5N
C. 7N
D. 8.7 N

Answers

Answer:The answer is A

Explanation:just did it on a test

Answer: D

Explanation

To find the horizontal and vertical components of a force, we use cos the angle x the force and sin the angle x the force respectively.

So in this case we use cos the angle x the force to find the horizontal component.

1) cos30 x 10
2) 0.866 x 10
3) 8.66
4) ≈ 8.7 N

Hope this helps:)

How does 'g' vary from place to place?​

Answers

Explanation:

The acceleration g varies by about 1/2 of 1 percent with position on Earth's surface, from about 9.78 metres per second per second at the Equator to approximately 9.83 metres per second per second at the poles.

what will happen to the gravitational force between two bodies if the distance between them is halved keeping their masses constant ?..

Answers

Since Fg=(Gm1m2)/r^2, if the masses are halted the gravitational force will be effected as well. In this case, the gravitational force would be lessened as well.

How many meters are in 10 miles?

Answers

Answer:

Explanation:

        16093.4

16093.44 meters…….. ….

A toy car with a mass of 5.5 kg is moving horizontally over flat ground at a speed of 2.1 m/s. An unknown force then directly pushes the car for a distance of 3 meters, after which the car has a speed of 7.3 m/s. You may assume that air resistance and friction are both negligible. What was the magnitude of the unknown force

Answers

Answer:

The magnitude of the unknown force is 44.8 N.

Explanation:

The force can be found with Newton's second law:                

[tex] F = ma [/tex]

Where:

m: is the mass of the toy car = 5.5 kg

a: is the acceleration

F: is the force =?

We can calculate the acceleration with the following kinematic equation:

[tex] v_{f}^{2} = v_{0}^{2} + 2ad [/tex]

Where:

[tex] v_{f} [/tex]: is the final speed = 7.3 m/s

[tex] v_{0} [/tex]: is the initial speed = 2.1 m/s

d: is the distance traveled = 3 m

Hence, the acceleration is:

[tex] a = \frac{v_{f}^{2} - v_{0}^{2}}{2d} = \frac{(7.3 m/s)^{2} - (2.1 m/s)^{2}}{2*3 m} = 8.15 m/s^{2} [/tex]

Finally, the magnitude of the force is:

[tex]F = ma = 5.5 kg*8.15 m/s^{2} = 44.8 N[/tex]                                  

Therefore, the magnitude of the unknown force is 44.8 N.

I hope it helps you!                                

If the wave is detected 12.5 minutes after the earthquake, estimate the distance from the detector to the site of the quake​

Answers

Answer:

Remember the relation:

Speed*Time = Distance.

We can estimate that the speed at which an earthquake "moves", in the surface, is:

S = 6km/s  (this is a low estimation actually)

Then if the wave is detected 12.5 minutes after the earthquake, we know that it traveled for 12.5 minutes before reaching the detector.

So we know the speed of the wave and the time it took to reach the detector, then we can use the equation:

Speed*Time = Distance.

to find the distance.

First, we should write the time in seconds

we know that:

1 min = 60 s

then:

12.5 min = 12.5*(60 s) = 750 s

Then, the wave traveled with a speed of 6 km/s for 750 seconds until it reached the detector, then the distance that it traveled is:

(6km/s)*750s = 4500 km

The distance between the detector and the site of the quake is around 4500 km.

When 24.0 V is applied to a
capacitor, it stores 3.92 x 10-4 J of
energy. What is the capacitance?
[?] x 10!? E

Answers

V=24VE=3.92×10^{-4}JCharge=QCapacitance=C

[tex]\boxed{\sf E=QV^2}[/tex]

[tex]\\ \sf\longmapsto Q=\dfrac{E}{V^2}[/tex]

[tex]\\ \sf\longmapsto Q=\dfrac{3.92\times 10^{-4}}{24^2}[/tex]

[tex]\\ \sf\longmapsto Q=\dfrac{3.92\times 10^{-4}}{576}[/tex]

[tex]\\ \sf\longmapsto Q=0.006\times 10^{-4}C[/tex]

[tex]\\ \sf\longmapsto Q=6\times 10^{-1}C[/tex]

[tex]\\ \sf\longmapsto Q=0.6C[/tex]

Now

[tex]\boxed{\sf Q=CV}[/tex]

[tex]\\ \sf\longmapsto C=\dfrac{Q}{V}[/tex]

[tex]\\ \sf\longmapsto C=\dfrac{0.6}{24}[/tex]

[tex]\\ \sf\longmapsto C=0.025F[/tex]

Note:-

SI unit of charge is Coulomb(C)SI unitvof Capacitance is Farad(F)

Any particle in this platform who belongs to the planet mars or venus or maybe neptune or from uranus or maybe mercury or jupiter i guess

Answers

Answer:

Ever since the discovery of Pluto in 1930, kids grew up learning that the solar system has nine planets. That all changed in the late 1990s, when astronomers started arguing about whether Pluto was indeed a planet. In a highly controversial decision, the International Astronomical Union ultimately decided in 2006 to designate Pluto as a "dwarf planet," reducing the list of the solar system's true planets to just eight.

What is the importance of physics???
MAKE IT QUICK!!!​

Answers

Answer:

Physics is the branch of science concerned with the nature and properties of matter and energy. The subject matter of physics, distinguished from that of chemistry and biology, includes mechanics, heat, light and other radiation, sound, electricity, magnetism, and the structure of atoms. And a more detailed working definition of physics may be: The science of nature, or that which pertains to natural objects, which deals with the laws and properties of matter and the forces which act upon them. Quite often, physics concentrates upon the forces having an impact upon matter, that is, gravitation, heat, light, magnetism, electricity, and others.

Physics helps us to understand how the world around us works, from can openers, light bulbs and cell phones to muscles, lungs and brains; from paints, piccolos and pirouettes to cameras, cars and cathedrals; from earthquakes, tsunamis and hurricanes to quarks, DNA and black holes. Physics helps us to organize the universe. It deals with fundamentals, and helps us to see the connections between seemly disparate phenomena.

Physics provides quantitative and analytic skills needed for analyzing data and solving problems in the sciences, engineering and medicine, as well as in economics, finance, management, law and public policy. Physics is the basis for most modern technology, and for the tools and instruments used in scientific, engineering and medical research and development. Manufacturing is dominated by physics-based technology.

To understand the fundamental principles of the universe, physics utilizes many workings from the other natural sciences. Because of this overlap, phenomena studied in physics (conservation of energy for example) are common to all material systems. The specific ways in which they apply to energy (hence, physics) are often referred to as the "laws of physics." Because each of the other natural sciences biology, chemistry, geology, material science, medicine, engineering, and others, work with systems which adhere to the laws of physics, physics is often referred to as the "fundamental science."

Answer:

Physics can be important in understanding the world and how it works. The  main goal of physics is to understand how the universe behaves.

Explanation:

The tin can with water in its bottom is heated to boil water and the steam is allowed to escape for some time. The open mouth is sealed with an air-tight cap and cooled under tap water. The tin can get crushed, why?

Answers

Explanation:

Water does expand with heat (and contract with cooling), but the amount of expansion is pretty small. So when you boil a can filled with water and seal it, the water will contract slightly as it cools. The can may kink slightly, but that will be it. Actually, most likely the only things you will be able to see is then top and bottom will be sucked in and go concave. Just like a commercial can of beans.

Now if you have a can with a little water and a big air space, things are completely different.

As the water boils, water vapour is given off. Steam. Let it boils for a minute just to make sure (nearly) all the air is expelled and the can is filled with steam.

Now when you put the lid on and cool the can, that steam condenses back to water, and goes from filling the can to a few drops of water. The can is now filled (if that is the right word) with a near vacuum, The air pressure, 15 lbs/square inch, will be pressing on every surface of the can, with nothing inside the can to resist it.

The can will crumple before your eyes.

The mass of a body:
(a) decreases when accelerated
(b) increases when accelerated
(c)decreases when moving with high velocity
(d)none of above

Answers

The answer that is the most reasonable is the option B

what are the two things that get their current from generator?

Answers

Answer:

Kinetic Generating Plants

Hydro-electric plants and wind-mills also convert energy into electricity. Instead of heat energy, they use kinetic energy, or the energy of motion. Moving wind or water (sometimes referred to as "white coal") spins a turbine, which in turn spins the rotor of a generator?

5. A child rides a pony on a circular track with a radius of 5 m Find the distance traveled and the placement
after the child has gone halfway around the track (8) Does the distance traveled increase, decrease, or stay the
same when the child completes one circuit of the track? Does the displacement increase, decrease, or stay the
same? Explain. (C) Find the distance and displacement ter a complete circuit of the track

Answers

The answer are :

A. Distance = 15.71 m , The displacement = 10 m

B. distance traveled will increase, displacement will decrease

C. The distance = 31.42 m , Displacement = 0

Difference between Distance and Displacement

Distance is a scalar quantity, while displacement is a vector quantity. Displacement is the distance travelled in a specific direction.

Given that a child rides a pony on a circular track with a radius of 5 m, after the child has gone halfway around the track

(A)

The distance traveled will be = 2[tex]\pi[/tex]r / 2

The distance = πr

The distance = 22/7 x 5

The distance = 15.71 m

The displacement = 2r

The displacement = 2 x 5

The displacement = 10 m

(B) The distance traveled will increase as the child completes one circle of the track but the displacement will decrease because the displacement in one cycle of a circular motion is zero since it is a vector quantity.

(C) The distance after a complete circuit of the track = 2πr

The distance = 2 × 22/7 × 5

The distance = 31.42 m

The displacement after a complete circuit of the track will be zero.

That is;

Displacement = 0

Therefore, the distance traveled and the displacement after the child has gone halfway around the track are 15.7 m and 10 m respectively. While the distance and displacement after a complete circle of the track are 31.42 m and 0 respectively.

Learn more about Displacement here: https://brainly.com/question/2109763

#SPJ1

Other Questions
The data shows the number of years that 30 employees worked for an insurance company before retirement. is the population mean for the number of years worked, and % of the employees worked for the company for at least 10 years. (Round off your answers to the nearest integer.) Direct Labor Variances Advanced Micro Devices develops high-performing computing products. Assume one of its processors, Ryzen 7 Pro, has a standard labor time of 0.25 hours and a standard labor rate of $20 per hour. During February, the following activities pertaining to direct labor for Ryzen 7 Pro were recorded: Direct labor hours used 64,000 Direct labor cost $1,248,000 Units of Ryzen 7 Pro manufactured 250,000 (a) Determine the labor rate variance. (b) Determine the labor efficiency variance. (c) Determine the total flexible budget labor cost variance. According to kinetic-molecular theory, which of the following would not be considered an ideal gas? Check all that apply.a gas at very high temperatures, when gas particles are moving very quicklya gas at very low volumes, when gas particles are very close togethera gas at very low temperatures, when gas particles have very little kinetic energya gas at very low pressures, when gas particles are very far aparta gas with highly polar molecules that have very strong intermolecular forces BRAINlIEST FOR CORRECT ANSWER A sample of gas is placed into an enclosed cylinder and fitted with a movable piston. Calculate the work (in joules) done by the gas if it expands from 5.33 L to 11.05 L against a pressure of 1.50 atm. The time that it takes to fold 1,000 origami cranes varies inversely with the number of people folding the cranes. If a class of 25 students work together to fold the 1,000 cranes, it will take 3 hours. Write an equation to show the relationship between time (t) and the number of people (n) folding cranes.ASAP!!!! A 0.25 mL sample of water drawn from a 5 liter flask contains 1.25 x 10^8 bacteria. Give the approximate number of bacteria in the flask, expressing your answer in scientific notation.(Scientific Notation: find a real number a between 1 and 10, and an integer n, such that x = a x 10^n.) What is the law of multiple proportions? A. The proportion of elements to compounds is constant.B. All elements are found in equal proportions in nature.C. Different compounds may contain the same elements but may have different ratios of those elements. D. All compounds contain the same elements in the same proportions. help me with this question I only have 3 minutes left Reinforced concrete is a raw material that has always been available, but it was unappreciated by architects until the nineteenth century.a. Trueb. False Sara is working on a Geometry problem in her Algebra class. The problem requires Sara to use the two quadrilaterals below to answer a list of questions.Part A: For what one value of are the perimeters of the quadrilaterals the same? (Hint: The perimeter of a quadrilateral is the sum of its sides.)Part B: For what one value of are the areas of the quadrilaterals the same? (Hint: The area of a quadrilateral is the product of its base and height.) If Jesus said that he is the son of God then why do people worship him and not the God.. And he never said worship me I am God? How did the Ten Commandments influence later political and legal ideas ? Select all that apply . Hurry please ! A(n) _____ is an expression that uses variables to state a rule.plz help asap Evaluate i^15 i^12 Show work Help help help help help 5. Shawn has a hypothesis that fungicides harm bee development. Using what you now know, describe an experiment to test Shawns hypothesis. Be sure your response includes what data should be collected and how you would collect it. The distribution of the number of children for families in the United States has mean 0.9 and standard deviation 1.1. Suppose a television network selects a random sample of 1000 families in the United States for a survey on TV viewing habits.Required:a. Describe (as shape, center and spread) the sampling distribution of the possible values of the average number of children per family. b. What average numbers of children are reasonably likely in the sample? c. What is the probability that the average number of children per family in the sample will be 0.8 or less? d. What is the probability that the average number of children per family in the sample will be between 0.8 and 1.0? Given the triangle below, what is mA, rounded to the nearest tenth? The area of a rectangle is 35ft^2 , and the length of the rectangle is 3 ft more than twice the width. Find the dimensions of the rectangle.