What will be the potential difference measured by an ideal voltmeter in the circuit of the figure?​

A concave mirror is an example of curved mirrors. So that the appropriate answer to the given question is option D. The rays will cross at the focal point.

A concave mirror is a type of mirror in which its inner part is the reflecting surface, while its outer part is the back of the mirror.  This mirror reflects all parallel rays close to the principal axis to a point of convergence. It can also be referred to as the converging mirror.

In this type of mirror, all rays of light parallel to the principal axis of the mirror after reflection will cross at the focal point.

Therefore, the required answer to the given question is option D. i.e The rays will cross at the focal point.

For reference: https://brainly.com/question/20380620

Answer:

Explanation:

The formula is

[tex]F_g=\frac{Gm_1m_2}{r^2}[/tex] and filling in:

[tex]F_g=\frac{(6.67*10^{11})(400)(800)}{(45^2)}[/tex] and multiply and divide all that out to get

[tex]F_g=1.1*10^{-8}[/tex]  It should really only be 1 significant digit since 400 and 800 both have only 1 significant digit, but I used 2. It should be

[tex]F_g=[/tex] 1 × 10⁻⁸ N

Complete question:

A bullet 2 cm long is fired at 420m/s and passes straight through a 10.0 cm thick board, exiting at 280m/s? What is the average acceleration of the bullet through the board?

Answer:

The average acceleration of the bullet through the board is -4.083 x 10⁵ m/s²

Explanation:

Given;

initial velocity of the bullet, u = 420 m/s

final velocity of the bullet, v = 280 m/s

length of the bullet, d₁ = 2 cm

thickness of the board, d₂ = 10 cm

total distance penetrated by the bullet through the board;

d = d₁ + d₂ = 2 cm + 10 cm = 12 cm = 0.12 m

The average acceleration of the bullet through the board is calculated as;

[tex]v^2 = u^2 + 2ad\\\\2ad = v^2 - u^2\\\\a = \frac{v^2 - u^2}{2d} \\\\a = \frac{(280^2) - (420^2)}{2(0.12)} = -4.083 \times 10^{5} \ m/s^2[/tex]

Therefore, the average acceleration of the bullet through the board is -4.083 x 10⁵ m/s²

Answer:

Magnetic Forces on Moving Charges. The magnetic force on a free moving charge is perpendicular to both the velocity of the charge and the magnetic field with direction given by the right hand rule.

The direction of the charge where it does not experience magnetic force is left and right. The correct option is C and D.

A magnetic field is a region in space where a magnetic force can be observed. It is created by moving electric charges, such as electrons, and is characterized by the direction and strength of the force it exerts on other magnetic materials or moving charges.

Magnetic field lines are used to visualize the direction and strength of the magnetic field. They represent the path that a small magnetic north pole would follow if placed in the magnetic field. The direction of the magnetic field is given by the direction in which the north pole of a compass needle would point if placed in the field.

Magnetic flux is the measure of the strength of the magnetic field passing through a surface. It is given by the product of the magnetic field strength and the area of the surface, as well as the cosine of the angle between the magnetic field and the surface normal. The unit of magnetic flux is Weber (Wb).

Magnetic flux is important in many applications, such as electric motors and generators, where the interaction between the magnetic field and moving charges produces electrical energy. It is also used in magnetic imaging techniques, such as MRI, to visualize the internal structures of the human body.

Here in the question,

Options A (up), B (down), E (into the screen), and F (out of the screen) are all perpendicular to the direction of the magnetic field and so will experience a magnetic force.

Therefore, options C and D are correct i. e left and right.as they are parallel and anti-parallel to the direction of the magnetic field, respectively.

To learn about Ohm's law click:

brainly.com/question/29775285

#SPJ7

Answer:

In sof the friction with the nylon is very small and the current with the line e is largeummary

Explanation:

When we rub the shoes against the carpet, static electricity is produced, when you touch the metal knob you close the circuit and the current can circulate to three of the body, the value of this current is of the order of micro volts, for which a small discharge, the power that circulates through the body is very small of the order of 0.005 A

When you touch the power line, the voltage may be small, but the amount of current that can generate them is of the order of tens of amps, the electric shock is much greater per location.

In general there is a rule that if the body resumes more than P = 4000W the discharge could be fatal.

In sof the friction with the nylon is very small and the current with the line e is largeummary, the difference is that the current at the stop , so the paper that passes through the body is large and can be dangerous.

In contact with metal doorknob, get a mild shock  while with power line of same voltage, fatal the body as the amount of current is more.

When the two materials are rubbed each other, then the electric charged generated between them.

This charging of materials, due to the rubbing of two materials against each other, is called the charging by friction.

It is easy to produce a potential difference of several thousand volts between the body and the floor by scuffing your shoes across a nylon carpet.

In this case, the potential difference may be higher, but the value of current is very low. Thus, when the body touches a metal doorknob, it will get a mild shock.

Now, in another case, the contact with a power line of comparable voltage would probably be fatal. This is because in the power line the amount of current is much higher.

Hence, in contact with metal doorknob, get a mild shock  while with power line of same voltage, fatal the body as the amount of current is more.

Learn more about the charging by friction here;

https://brainly.com/question/8418256

Answer:

the tendency of electron dipole moments to align with an applied magnetic field

Explanation:

Paramagnetism has to do with possession of unpaired electrons. Substances that possess unpaired electrons are said to be paramagnetic.

When an external magnetic field is applied to a paramagnetic substance, the magnetic field causes the electrons spins of the paramagnetic substance to align parallel to the field,which leads to a net attraction.

Hence, paramagnetism is closely associated with the tendency of electron dipole moments to align with an applied magnetic field.

Answer:

6.08

Explanation:

Given that,

Current, I = 0.8 A

Time, t = 76 h

We need to find the Ah rating of a battery. It can be calculated by taking the product of current and time. So,

Ah = (0.8)(76)

= 6.08 Ah

So, the Ah rating of the battery is 6.08.

Answer:

First answer - (E)

Second answer - (B)

Explanation:

The trade-off here is between TV ADVERTISEMENTS and LETTERS TO POTENTIAL VOTERS. The campaign manager for the candidate who is running for reelection, is trying to decide which of the two factors he should use more of or emphasize. The production function for campaign votes can be simplified as

TVAD + LTPV = CV

This is the production function for campaign votes.

PART A

Describe the production function for campaign votes (in words).

ANSWER: (E)

Television advertisements and (or 'plus') letters to potential voters, produce (or 'equal') campaign votes.

PART B

How might information about this function (such as the shape of the isoquants) help the campaign manager plan strategy?

ANSWER: (B)

If television advertisements and letters to potential voters are perfect complements (complements are goods or actions that 'must' go together or be used together) then the campaign manager should use them in fixed proportions (e.g. in a ratio of 50:50).

Answer: [tex]1361.11\ N/C,\text{upward}[/tex]

Explanation:

Given

Mass of particle is [tex]m=2.5\ gm[/tex]

Charge of particle is [tex]q=18\ \mu C[/tex]

Electrostatic force must balance the weight of the particle

[tex]\lim_{n \to \infty} a_n \Rightarrow mg=qE\\\\\Rightarrow E=\dfrac{2.5\times 9.8\times 10^{-3}}{18\times 10^{-6}}\\\\\Rightarrow E=1361.1\ N/C[/tex]

Direction of the electric field is in upward direction such that it opposes the gravity force.

Answer:

1.931 kilometres is the answer of 1.2 miles

Answer and Explanation:

1 mile = 1.609 km

Set up a fraction to cancel the miles to get the kilometers.

[tex]\frac{1.2mi}{?km} *\frac{1.609}{1mi} = 1.9308km[/tex] <- This is the answer.

#teamtrees #PAW (Plant And Water)

Answer:

2bsnsnsnns181991oiwiw

Answer:

[tex]d=1.29*10^{-6}m[/tex]

Explanation:

From the question we are told that:

Distance of wall from CD [tex]D=1.4[/tex]

Second bright fringe [tex]y_2= 0.803 m[/tex]

Let

Strontium vapor laser has a wavelength \lambda= 431 nm=>431 *10^{-9}m

Generally the equation for Interference is mathematically given by

[tex]y=frac{n*\lambda*D}{d}[/tex]

Where

[tex]d=\frac{n*\lambda*D}{y}[/tex]

[tex]d=\frac{2*431 *10^{-9}m*1.4}{0.803}[/tex]

[tex]d=1.29*10^{-6}m[/tex]

Answer:

where are the options

it's not full question

The work done by the gravitational field of the earth on the rock is 9.998 x 10⁸ J.

The given parameter include:

the mass of the object, m₁ = 16 kg

Note: the mass of the earth, m₂ = 5.972 x 10²⁴ kg

Work done = gravitational force (F) x radius of the earth (R)

[tex]Work \ done = \frac{Gm_1m_2}{R^2} \times R\\\\Work \ done = \frac{Gm_1m_2}{R} \\\\where;\\\\R \ is \ the \ radius \ of \ the \ earth = 6,378 \ km = 6,378,000 \ m\\\\G \ is \ the \ universal \ gravitation \ constant = 6.674 \times 10^{-11} Nm^2/kg^2\ \\\\Work \ done = \frac{(6.674 \times 10^{-11} ) \times (5.972\times 10^{24}) \times (16)}{6,378,000 } \\\\Work \ done = 9.998 \times 10^{8} \ J[/tex]

Therefore, the work done by the gravitational field of the earth on the rock is 9.998 x 10⁸ J.

To learn more about work done by gravitational field of the earth visit: https://brainly.com/question/13934028

Answer:

SI is used in most places around the world, so our use of it allows scientists from disparate regions to use a single standard in communicating scientific data without vocabulary confusion

The upward force on each supporting plank is 200 N

The given parameters include;

To show that the upward force of each supporting plank is 200 N, make the following sketch.

                 W₂                                                           W₃

                  ↑                                                              ↑                                                              

           -----------------------------------------------------------------------

              0.2m                         ↓                               0.2m

                                              400 N

W₂  +   W₃ = 400 N

But the distance of each supporting plank from the end is equal, (0.2m).

Then, W₂  =  W₃

2W₂ = 400 N

W₂ = 400N/2

W₂ = 200 N

W₃ = 200 N

Therefore, the upward force on each supporting plank that keeps the plank in equilibrium position is 200 N.

To learn more about equilibrium forces visit: https://brainly.com/question/12582625

Answer:

Measurements refers to a process which typically involves identifying and determining the dimensions of a physical object.

Explanation:

A scientific method can be defined as a research method that typically involves the use of experimental and mathematical techniques which comprises of a series of steps such as systematic observation, measurement, and analysis to formulate, test and modify a hypothesis.

Measurements refers to a process which typically involves identifying and determining the dimensions of a physical object.

Basically, the dimensions include important parameters such as width, height, length, area, volume, circumference, breadth, etc.

Answer:Acupressure

.

.

..

But why post this question in Physics

Answer:

1.36 m/s

Explanation:

I = ½mR²

τ = FR

α = τ/I = FR / (½mR²) = 2F/mR

a = Rα = 2F/m

s = θR

v² = u² + 2as

u = 0

v = √2as = √(2(2F/m)(θR)) = 2√(FθR/m)

v = 2√(29.0(0.400)(2π)(0.280) / 43.9) = 1.3636272...

Solution :

a). B at the center :

     [tex]$=\frac{u\times I}{2R}$[/tex]

Here, one of the current is in the clockwise direction and therefore, the other current must be in the clockwise direction in order to cancel out the effect of the magnetic field that is produced by the other.

Therefore, the answer is ANTICLOCKWISE or COUNTERCLOCKWISE

b). Also, the sum of the fields must be zero.

Therefore,

[tex]$\left(\frac{u\times I_1}{2R_1}\right) + \left(\frac{u\times I_2}{2R_2}\right) = 0$[/tex]

So,

[tex]$\frac{I_1}{d_1}= \frac{I_2}{d_2}$[/tex]

[tex]$=\frac{16}{21}=\frac{I_2}{32}$[/tex]

[tex]$I_2=24.38 $[/tex] A

Therefore, the current in the outer wire is 24.38 ampere.

Answer:

(a) counter clockwise

(b) 24.38 A

Explanation:

inner diameter, d = 21 cm

inner radius, r = 10.5 cm

Current in inner loop, I = 16 A clock wise

Outer diameter, D = 32 cm

Outer radius, R = 16 cm

(a) The magnetic filed due to the inner wire is inwards to the plane of paper. According to the Maxwell's right hand thumb rule, the direction of magnetic field in outer wire should be outwards so that the net magnetic field is zero at the center.

So, the direction of current in outer wire is counter clock wise in direction.

(b) Let the current in outer wire is I'.

The magnetic field due to the inner wire is balanced by the magnetic field due to the outer wire.

[tex]\frac{ \mu 0}{4\pi}\times \frac{2 I}{r}=\frac{\mu 0}{4\pi}\times \frac{2 I'}{R}\\\frac{16}{10.5}=\frac{I'}{16}\\\\I' = 24.38 A[/tex]

Answer:

thanks for da 5points hoi

Explanation: thanks dawg

There can be uncertainty in calculating the wavelength of a laser light  due to experimental errors

All measurements have an uncertainty, in the case of direct measurements the uncertainty is equal to the precision of the given instrument.

Uncertainty  means the range of possible values within which the true value of the measurement lies.

The deviation  in the value of the measured quantity from the actual quantity or true value is called an error

(a) For the calculation of wavelength of laser light , the sources which can lead to uncertainty are

1. least count of measuring instruments like spectrometer or interferometer

2. Parallax error in the measurement

3. Error in identifying the order of fringes

4.. unable to identify the accurate  reading of Vernier or circular scales present in the measuring instruments.

5. Propagating errors

The least count of a measuring instrument is the smallest and accurate value in the measured quantity that can be measured by instrument.

When you have derived variables, that is, when measurements are made with different instruments, each with a different uncertainty, the way to find the uncertainty or error is that  all the errors add up. which increases the uncertainty

b. The uncertainty in measurement due to  least count depends on the instrument used for measurement f wavelength. A  Michelson's

interferometer has the least count of .0001mm. whereas spectrometer has a least count of 0.5⁰. Hence uncertainty in the measurement by Michelson's interferometer is very less as compared to any other instrument.

C. The maximum uncertainty arises due to the least count , as all other errors can be minimized by taking an average value of many observations but the least count of an instrument do not change so uncertainty within the least count arises.

To know more on errors and uncertainty in measurements here

https://brainly.com/question/24652157

#SPJ2

Answer:

the radius of the bigger loop is 5 cm.

Explanation:

Given;

current in the smaller loop, I₁ = 12 A

current in the larger loop, I₂ = 20 A

radius of the smaller loop, r₁ = 3 cm

let the radius of the larger loop, = r₂

Apply Biot-Savart's law to determine the magnetic field at the center of the circular loops.

[tex]B= \frac{\mu_0 I}{2r}[/tex]

The magnetic field at the center of the smaller loop;

[tex]B_1 = \frac{\mu_0 I_1}{2 r_1}[/tex]

The magnetic field at the center of the bigger loop;

[tex]B_2 = \frac{\mu_0 I_2}{2 r_2}[/tex]

If the magnetic field at the center is zero, then B₁ = B₂

[tex]B_1 = B_2 = \frac{\mu_0 I_1}{2 r_1} = \frac{\mu_0 I_2}{2 r_2} \\\\\frac{I_1}{ r_1} = \frac{ I_2}{r_2} \\\\r_2 = \frac{I_2 r_1}{ I_1} = \frac{(20 \ A) \times (3.0 \ cm)}{12 \ A} = 5 \ cm[/tex]

Therefore, the radius of the bigger loop is 5 cm.

(C) [tex]^{208}_{84}\text{Po}[/tex]

Explanation:

[tex]^{212}_{86}\text{Rn} \rightarrow \:^4_2\text{He} + \:^{208}_{84}\text{Po}[/tex]

Answer:

   t = 2.09 10⁻³ s

Explanation:

We must solve this problem in parts, first we look for the acceleration of the electron and then the time to travel the distance

let's start with Newton's second law

        ∑ F = m a

the force is electric

        F = q E

we substitute

        q E = m a

        a = [tex]\frac{q}{m} \ E[/tex]

        a = [tex]\frac{1.6 \ 10^{-19}}{ 9.1 \ 10^{-31} } \ 7.8 \ 10^{-9}[/tex]

        a = 1.37 10³ m / s²

now we can use kinematics

        x = v₀ t + ½ a t²

indicate that rest starts v₀ = 0

        x = 0 + ½ a t²

        t = [tex]\sqrt{\frac{2x}{a} }[/tex]

        t = [tex]\sqrt{\frac {2 \ 3 \ 10^{-3}}{ 1.37 \ 10^3} }[/tex]

        t = 2.09 10⁻³ s

Answer:

  E = 1.25 MV / m

Explanation:

For this exercise let's use Newton's second law

          F = m a

where the force is electric

          F = q E

we substitute

          q E = m a

          E = m a / q

indicate there are 500,000 excess electrons

          q = 500000 e

          q = 500000 1.6 10⁻¹⁹

          q = 8 10⁻¹⁴ C

the mass is m = 10⁻¹¹ kg and the acceleration a = 10⁴ m / s²

let's calculate

          E = 10⁻¹¹ 10⁴ / 8 10⁻¹⁴

          E = 0.125 10⁷ V / m = 1.25 10⁶ V / m

          E = 1.25 MV / m

Answer:

The correct option is B. 7.5 * 10¹⁴ Hz

Explanation:

Frequency = (speed) / (wavelength)

= (3 x 10⁸ m/s) / (4 x 10⁻⁷ m)

= (3/4 x 10¹⁵) ( m / m - s )

= (0.75 x 10¹⁵) /sec

= 7.5 x 10¹⁴ Hz

= 750,000 GHz

Answer:

Mark Brainliest please

answer is

Explanation:

For any wave,              

                          Frequency = (speed) / (wavelength)

                                             = (3 x 10⁸ m/s) / (4 x 10⁻⁷ m)

                                             = (3/4 x 10¹⁵)  ( m / m - s )

                                             = (0.75 x 10¹⁵)  /sec

                                             =  7.5 x 10¹⁴  Hz

                                             =   750,000 GH