When 2-methyl-3-hexene is treated with Cl2 in methanol, three products are formed (neglecting stereoisomers). Draw curved arrows to show the movement of electrons in this step of the reaction mechanism.

Answer: The statement it is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed, is true.

Explanation:

A chemical reaction in which heat energy  is released is called an exothermic reaction. For exothermic reactions, the value of [tex]\Delta H[/tex] is always negative.

A chemical reaction in which heat energy is absorbed is called an endothermic reaction. For endothermic reaction, the value of [tex]\Delta H[/tex] is always positive.

In endothermic reactions, energy required for breaking the bonds between reactants is less than the energy when products are formed due to which the value of [tex]\Delta H[/tex] remains positive.

Thus, we can conclude that the statement it is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed, is true.

It is endothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed. The correct option is B.

The above reaction is endothermic because more energy is produced when new bonds form in the products (H = 920 kJ/mol) than is required to break bonds in the reactants (H = -750 kJ/mol).

In an endothermic process, more energy than is generated during bond creation is absorbed from the environment to dissolve existing bonds. This causes a net absorption of energy, which cools the system.

The reaction takes more energy than it releases, proving its endothermic nature, as seen by the positive difference between the energy needed to dissolve bonds and the energy released during bond formation.

Thus, the correct option is B.

For more details regarding endothermic process, visit:

https://brainly.com/question/28909381

#SPJ3

Your question seems incomplete, the probable complete question is:

During a reaction, ΔH for reactants is −750 kJ/mol and ΔH for products is 920 kJ/mol. Which statement is correct about the reaction? (5 points)

Group of answer choices

A. It is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed.

B. It is endothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed.

C. It is exothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed.

D. It is exothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed.

answer

j'ai besoin d'aide

=]

<3

Answer:

False

Explanation:

An object with a density less than the density of water will float.

And an object that is denser than water (more than 1.00g/mL) will sink when placed in water.

Answer:

NH3 Ammonia

Explanation:

Ammonia has 4 regions of electron density around the central nitrogen atom (3 bonds and one lone pair). These are arranged in a tetrahedral shape. The resulting molecular shape is trigonal pyramidal with H-N-H angles of 106.7°.

Answer: The first law of thermodynamics is a statement of conservation of energy.

Explanation:

According to the first law of thermodynamics, heat provided to a system is actually the sum of internal energy and work done by the system or on the system.

Mathematically, [tex]\Delta Q = \Delta U + \Delta W[/tex]

The first law of thermodynamics also means that energy can neither be created nor it can be destroyed. Hence, energy is conserved.

Thus, we can conclude that the first law of thermodynamics is a statement of conservation of energy.

Answer:

The rate of the reverse reaction before any addition of CH3CO2- is zero

Explanation:

When the reaction is in equilibrium:

HCH3CO2(aq) + H2O ⇄ H3O+(l)(aq) + CH3CO2^-(aq)

The reaction quotient, Q = Ka and no more products or reactants are produced because their concentrations are in the right proportion.

Now, as no reaction occurs,

Answer:

Find the definition below.

Explanation:

A standard cell is a group of transistors that have a regular electromotive force flowing through them. They follow either the boolean function or the storage function. A technology library that is made up of a collection of standard cells can be used to facilitate the placement, routing, and synthesis of the Application-specific Integrated Circuit (ASIC).

Electronic Design Automation is an example of an apparatus that implements this functionality.

Answer:

v2=5.11L

Explanation:

given

v1=2.58L

N1=0.118mol

N2=0.234

v2=x

according to charles law V1/N1=V2/N2

2.58/0.118=V2/0.234

21.86=V2/0.234

21.86×0.234= v2

5.116L=v2

5.116L is the

answer or u can simplify it and make 5.1 L

Answer:

Depends on molecule.

Explanation:

The number of the polypeptide chains present in the oligomer depends on the molecule. Some molecules have more polypeptide chains whereas some of them have less polypeptide chains. For example, Hemoglobin is a oligomer that consists of four Polypeptide Chains, two of these Polypeptide Chains are α-globin molecules, each comprise of 141 amino acids, and the other two are (β, γ, δ, or ε) globins, each consist of 146 amino acids.

Answer:

The correct answer is - 0.0188 mJ*s^-1.

Explanation:

In order to convert the kPA value to PA value--

and then convert PA unit to 1 kgm^-1s^-2

And in finally convert mm to m

The value that come should be convert from kgm^2s^-2 to and then convert J to mJ or kJ by dividing 100 or 100 subsequently.

As no question given this method can be followed for the answer.

Answer:

The answer is B, sublimation.

Answer:

The correct answer

B . Sublimation

Answer:be careful and relax

Explanation:

Answer:

Hahaha be careful and relax

Answer:

1.5L of NaNO3 must be present

Explanation:

That contains 200g of sodium nitrate. Round to 2 significant digits

To solve this question we need to convert the mass of NaNO3 to moles using its molar mass (85g/mol). With the moles and the molar concentration we can find the volume in liters of the solution:

Moles NaNO3:

200g * (1mol / 85g) = 2.353 moles NaNO3

Volume:

2.353 moles NaNO3 * (1L / 1.60moles) =

Answer:

It would take 200,000 years for a spaceship traveling at the speed of light to go across the entire galaxy.

Answer:

O B. Alkaline earth metals

Explanation:

Noble gases → 8th column.

Alkali metal → first column.

Halogen → 7th

Answer:

B. Alkaline earth metals

Explanation:

Alkaline-earth metals: The alkaline-earth metals make up Group 2 of the periodic table, from beryllium (Be) through radium (Ra). Each of these elements has two electrons in its outermost energy level, which makes the alkaline earths reactive enough that they're rarely found alone in nature. But they're not as reactive as the alkali metals. Their chemical reactions typically occur more slowly and produce less heat compared to the alkali metals.

Answer:

NH4Cl > Li2SO4 > CoCl3

Explanation:

Let us recall that the freezing point depression depends on the molality of the solution and the number of particles present.

Let us also recall that freezing point depression is a colligative property. It depends on the number of particles present in solution.

Usually, the more the number of particles present, the lower the freezing point. Hence, NH4Cl which has only two particles will have the highest freezing point while CoCl3 which has four particles will have the lowest freezing point.

Answer:

[HI] = 0.704mol

[H2] = 0.048mol

[I2] = 0.148mol

Explanation:

Based on the equilibrium:

H2(g)+I2(g) --> 2HI(g)

The equilibrium constant, K, is defined as:

K = 70 = [HI]² / [H2] [I2]

Where [] could be taken as the moles in equilibrium of each reactant

To know the direction of the equilibrium we need to find Q with the initial moles of each species:

Q = [0.200mol]² / [0.300mol] [0.400mol]

Q = 0.333

As Q < K, the reaction will shift to the right producing more HI. The equilibrium moles are:

[HI] = 0.200mol + 2X

[H2] = 0.300mol - X

[I2] = 0.400mol - X

Replacing in K:

70 = [0.200 + 2X ]² / [0.300 - X] [0.400 - X]

70 = 0.04 + 0.8 X + 4 X² / 0.12 - 0.7 X + X²

8.4 - 49 X + 70 X² = 0.04 + 0.8 X + 4 X²

8.36 - 49.8X + 66X² = 0

Solving for X:

X = 0.252 moles. Right solution

X = 0.502 moles. False solution. Produce negative moles.

Replacing:

[HI] = 0.200mol + 2*0.252 mol

[H2] = 0.300mol - 0.252 mol

[I2] = 0.400mol - 0.252 mol

[HI] = 0.704mol

[H2] = 0.048mol

[I2] = 0.148mol

Answer:

Earth has a mass of 5.9736×1024 kg

hope it is helpful to you

Answer:

The student completed the experiment correctly and there were no errors in the experiment.

Explanation:

When a pea size amount of K2CO3 is dropped into a solution of HCl, the following reaction occurs;

K2CO3(s) + 2HCl(aq) ----> 2KCl(aq) + CO2(g) + H2O(l)

The gas CO2 does not support burning hence, when the student performed a splint test and observed that the splint was extinguished when he placed the splint into the test tube of the gas.

Hence, the experiment was properly conducted and the student completed the experiment correctly and there were no errors in the experiment.

Explanation:

A compound containing only two elements is called a binary compound.

(a). The compound HCN contains a hydrogen ion and cyanide ion. Hence, the name of HCN is hydrogen cyanide.

An aqueous solution of hydrogen cyanide is known as hydrogen cyanide solution.

(b). The compound HF contains a hydrogen ion and a fluorine ion. The suffix -ide will be added to its name. So, the name of this compound is hydrogen fluoride.

An aqueous solution of HF is known as hydrogen fluoride.

(c). The compound [tex]H_{2}S[/tex] contains two hydrogen atoms and one sulfur atom. The suffix -ide will be added to its name. So, the name of this compound is hydrogen sulfide.

An aqueous solution of this compound is known as hydrogen sulfide solution.

Answer:

7.640 kg

Explanation:

Step 1: Write the balanced complete combustion equation for ethanol

C₂H₆O + 3 O₂ ⇒ 2 CO₂ + 3 H₂O

Step 2: Calculate the moles corresponding to 4 kg (4000 g) of C₂H₆O

The molar mass of C₂H₆O is 46.07 g/mol.

4000 g × 1 mol/46.07 g = 86.82 mol

Step 3: Calculate the moles of CO₂ released

86.82 mol C₂H₆O × 2 mol CO₂/1 mol C₂H₆O = 173.6 mol CO₂

Step 4: Calculate the mass corresponding to 173.6 moles of CO₂

The molar mass of CO₂ is 44.01 g/mol.

173.6 mol × 44.01 g/mol = 7640 g = 7.640 kg

Answer:

B₂O₃

Explanation:

Step 1: Calculate the mass of oxygen in 150 mg of boron oxide

Of 150 mg of boron oxide, 46.6 mg belong to boron. The mass of oxygen is:

150 mg - 46.6 mg = 103.4 mg

Step 2: Calculate the percent by mass of each element

We will use the following expression.

%Element = mElement/mCompound × 100%

%B = 46.6 mg/150 mg × 100% = 31.1%

%O = 103.4 mg/150 mg × 100% = 68.9%

Step 3: Divide each percentage by the atomic mass of the element

B: 31.1/10.81 = 2.88

O: 68.9/16.00 = 4.31

Step 4: Divide both numbers by the smallest one (2.88)

B: 2.88/2.88 = 1

O: 4.31/2.88 ≈ 1.5

Step 5: Multiply both numbers by 2 so that they are integers

B: 1 × 2 = 2

O: 1.5 × 2 = 3

The empirical formula is B₂O₃.

Answer:

See explanation

Explanation:

All molecules possess the London dispersion forces. However London dispersion forces is the only kind of intermolecular interaction that exists in nonpolar substances.

So, the only kind of intermolecular interaction that exists in dimethyl ether is London dispersion forces.

As for ethyl alcohol, the molecule is polar due to the presence of polar O-H bond. In addition to London dispersion forces, dipole-dipole interactions and specifically hydrogen bonding also occurs between the molecules.

Because ethyl alcohol is polar, it is more soluble in water than dimethyl ether.

Answer:

Option A is correct, there will be no N2 left in the flask

Explanation:

Step 1 : Data given

Number of moles of N2 = 135 mmol = 0.135 mol

Number of moles of H2 = 405 mmol = 0.405 mol

Step 2: The reaction

N2(g)+3H2(g)→2NH3(g)

Step 3:

For 1 mol N2 we need 3 moles H2 to produce 2 moles NH3

Both will completely react. There is no limiting reactant.

There will be produce 0.270 moles NH3.

Option A is correct, there will be no N2 left in the flask

Answer:

Ba(OH)₂ + 2 HBr ⇒ BaBr₂ + 2 H₂O

Explanation:

We have the products of a reaction and we have to predict the reactants. Since the products are binary salt and water, this must be a neutralization reaction. In neutralizations, acids react with bases. The acid that gives place to Br⁻ is HBr, while the base the gives place to Ba²⁺ is Ba(OH)₂. The balanced chemical equation is:

Ba(OH)₂ + 2 HBr ⇒ BaBr₂ + 2 H₂O

Answer:

yes

Explanation:

it is important for electrolysis