Thermochemical equation for the chemical reaction is: 2KClO₃(s)→ 2KCl(s) + 3O₂(g), ΔH = -78.0kJ.
What is thermochemical equation?Potassium chlorate (KClO₃) decomposes into potassium chloride (KCl) and oxygen gas (O₂). When 2 mol of KClO₃ crystals decompose to KCl crystals and O₂ gas at constant temperature and pressure, 78.0 kJ of heat is given off. KClO₃(s) → KCl(s) + 3/2 O₂(g)
For every mole of KClO₃(s), there is the production of one mole of KCl(s) and 1.5 moles of O₂(g).Therefore, for the formation of 2 mol of KClO₃(s), the quantities of the products are: 2 mol KClO₂(s) → 2 mol KCl(s) + 3 mol O₂(g)
The thermochemical equation for the reaction is:2KClO₃(s) → 2KCl(s) + 3O₂(g), ΔH = -78.0kJ
Learn more about Thermochemical equation here:
https://brainly.com/question/2874342
#SPJ11
19. which sample, when dissolved in 1.0 liter of water, produces a solution with the lowest boiling point?
The sample with the lowest boiling point when dissolved in 1.0 liter of water is sodium chloride (NaCl). Sodium chloride is a common salt compound which, when dissolved in water, lowers the boiling point of the solution.
To calculate the boiling point, use the following equation: Boiling Point = K b x m, where Kb is the ebullioscopic constant and m is the molality of the solution.
The ebullioscopic constant for sodium chloride is 0.51 K kg mol-1 and the molality is equal to the number of moles of solute divided by the volume of the solution. Therefore, for a 1.0 liter solution, the boiling point of the solution would be 0.51 K kg mol-1 x 0.78 moles/1.0 liter = 0.398 K kg mol-1.
Learn more about boiling point: https://brainly.com/question/40140
#SPJ11
In an open manometer with an atmospheric pressure of 104 kPa, the mercury level in the arm connected to the gas is 150 mm Hg lower than in the arm connected to the atmosphere. What is the pressure of the gas sample?
what needs to increase in order to make a substance more soluble?
By supplying more energy to counteract intermolecular interactions and increasing contact between solvent and solute, raising temperature, agitation, surface area, or lowering particle size can enhance solubility.
A substance's solubility refers to its capacity to dissolve in a solvent. Intermolecular forces between the solute particles are broken during the dissolving process, and new connections with the solvent molecules are created. Solubility can be raised by adding extra energy to break through these intermolecular connections. Although agitation and expanding surface area improve the contact between the solvent and solute, rising temperature releases more thermal energy to break the intermolecular interactions. By increasing surface area per unit volume, particle size reduction increases interaction with the solvent. Moreover, by giving the solute additional solvation sites, more solvents or surfactants can be added to increase solubility.
learn more about solubility here:
https://brainly.com/question/29857840
#SPJ4
What element from space is pulled by gravity and turn into a protostar?
Elements from space that are pulled by gravity and turn into a protostar are mostly made up of hydrogen.
Hydrogen is the most abundant element in the universe and is present in large quantities in space. When gravity pulls together a large amount of hydrogen gas and dust, it can create a protostar. As the hydrogen particles come together, they begin to heat up due to the increased pressure and eventually, the temperature and pressure become so great that nuclear fusion can occur, creating a fully-fledged star. Therefore, the process of star formation is primarily driven by the gravitational attraction between hydrogen atoms. Other elements such as helium, carbon, and oxygen may also be present in space, but their role in star formation is typically secondary.
To know more about hydrogen click here:
brainly.com/question/31018544
#SPJ4
A solution contains a total concentration of molecules [A]tot of 5.345 x 10-5 mol/l and a total concentration of molecules [B]tot of 1.245 x 10-4 mol/l. The dissociation constant for the complex AB is 2.208 x 10-6 mol/l. Part A - Concentration of AB in equilibrium Determine the equilibrium concentration [AB] of the heterodimeric complex AB formed by the molecules A and B in the solution.
The equilibrium concentration [AB] of the heterodimeric complex AB formed by the molecules A and B is 0.003026 mol/l.
Why equilibrium concentration is 0.003026 mol/l.?
The equilibrium concentration of the heterodimeric complex AB formed by the molecules A and B in the given solution can be determined using the dissociation constant for the complex AB and the total concentrations of molecules A and B provided in the problem statement.
The dissociation constant for the complex AB is given by Kd = [A][B]/[AB]
where [A] and [B] are the concentrations of the individual molecules A and B and [AB] is the concentration of the complex AB at equilibrium.
Rearranging this equation gives [AB] = [A][B]/Kd.
Substituting the given values of [A], [B], and Kd in the above equation,
we get: [AB] = (5.345 x 10⁻⁵mol/l) x (1.245 x 10⁻⁴mol/l)/(2.208 x 10⁻⁶mol/l)
[AB] = 0.003026 mol/l
Therefore, the equilibrium concentration [AB] of the heterodimeric complex AB formed by the molecules A and B in the given solution is 0.003026 mol/l.
Learn more about equilibrium concentration
brainly.com/question/13043707
#SPJ11
Ian noticed that during a reaction the beaker containing his reactants got very cold. What kind of reaction is this?
Answer: Endothermic Reaction
Explanation:
It is Endothermic Reaction because, during Endothermic reaction, heat is absorbed from the surrounding. It is cold because, due to the reaction, the heat is absorbed, lowering the temperature of the mixture in the beaker, making the reactants cold.
Review these definitions, and make sure to not get confused between Exothermic and Endothermic reactions.
Exothermic Reaction: A chemical reaction where energy is released.
Endothermic Reaction: A chemical reaction where energy is absorbed from the environment.
Match the terms to the appropriate definitions and/or descriptions
HELP!!
Absolute dating:
Using the abnormal isotopes inside specimens and using half-life calculations to learn the absolute dates.Carbon 14 datingRadiometric datingWhat matches other terms?Zircon: A crystal that helps determine the age of an igneous intrusion or layer of a very old specimen.
Meteorites: Help to determine the age of the universe because it is assumed they were around the same time as the Earth was formed
Compression melting: Was likely formed by tectonic and volcanic events
Relative dating: When scientist are simply looking for a logical sequence of events
An igneous intrusion: A crystal that helps determine the age of an igneous intrusion or layer of a very old specimen
Unconformity: When layers are missing from one area to another because of erosion of exposed parts that occurred because of an earthquake or other geological event.
Index fossils: If a fossil is determined to be a certain age, the layer it was found in is likely of the same age.
The Grand Canyon: Was likely entirely formed by a river
Iguazu Falls in Argentina: Was likely formed by glacial forces
Yosemite Valley: The lowest layer of glaciers that lubricate and allows a glacier to move
The statement "An igneous intrusion is always younger than all the layers it cuts through" is true.
The statement "Using radiometric methods to find the approximate age of a layer or fossil" is true.
learn more about Radiometric dating: https://brainly.com/question/8831242
#SPJ1
The text format of the question goes thus:
Absolute dating
Zircon
Meteorites
Compression melting
Relative dating
An igneous intrusion
Unconformity
Index fossils
The Grand Canyon
Iguazu Falls in Argentina
Yosemite Valley
Carbon 14 dating
Radiometric dating
a. was kkely formed by glacial forces
b. is always younger than all the layers it cuts through
Using the abnormal isotopes inside specimens and using half-life calculations to learn the absolute dates.
d. If a fossil is determined to be a certain age, the layer it
was found in is likely of the same age.
e. Using radiometric methods to find the approximate age
of a layer or fossil
was likely entirely formed by a river
When layers are missing from one are to another because of erosion of exposed parts that occurred because of an earthquake or other geological event.
h was likely formed by tectonic and volcanic events
To learn absolute date of a more recent item.
J. the lowest layer of glaciers that lubricate and allows a
glacier to move k. A crystal that helps determine the age of an igneous intrusion or layer of a very old specimen
When scientist are simply looking for a logical sequence
of events
m. Help to determine the age of the universe because it is
assumed they were around the same time as the Earth
was formed
what the deffinition of structural formula?
Structural formula: Definition: A structural formula is a molecular representation that depicts the relationship between atoms or functional groups in a chemical compound. It's also known as a chemical formula or molecular formula.
Structural formulas provide a more detailed view of the molecular structure than empirical formulas, which only show the simplest ratio of atoms in a compound.
The structural formula also shows the spatial arrangement of atoms and groups in a compound.
There are two types of structural formulas: condensed structural formulas and Lewis structures.
Condensed structural formulas provide a concise representation of the molecular structure by eliminating most of the bonds and functional groups present in a compound.
The Lewis structure, on the other hand, shows the bonding pairs and lone pairs of electrons present in a molecule.
Structural formulas are critical in chemical analysis, particularly in organic chemistry, where they aid in the identification and characterization of chemical compounds.
These formulas help to explain the chemical properties and behavior of compounds, making them useful in drug development, food production, and other industries.
For similar question on structural formula.
https://brainly.com/question/26388921
#SPJ11
Which layers of the stem are made of parenchyma cells? cortex and pith epidermis sclerenchyma epidermis and cortex.
The cortex and pith layers of the stem are made up of parenchyma cells. These cells are responsible for storing and transporting nutrients and water throughout the plant.
Two significant plant stem layers are the cortex and pith. The pith is found at the stem's centre, while the cortex is situated in between the epidermis and the vascular tissue. Parenchyma cells, which are the most prevalent and adaptable form of plant cell, make up both of these layers. Large vacuoles and thin cell walls are characteristics of parenchyma cells, which may perform a variety of tasks include photosynthesis, water and nutrient transport, and storage. The flow of water and nutrients between the roots and leaves in stems is especially dependent on the parenchyma cells in the cortex and pith.
learn more about cortex here:
https://brainly.com/question/29342434
#SPJ4
Suppose the molar solubility of Ag2CrO4 in water is x M, while its molar solubility in a 0.005 M solution of Na2CrO4 is y M. Which of the following is correct?A) It can't be determined.B) x < yC) x > yD) x = y
When Ag2CrO4 is dissolved in a Na2CrO4 solution, its molar solubility decreases. In other words, x > y.The correct answer is c.
The molar solubility is the quantity of a solute (in moles) that can be dissolved per liter of solution (in liters) at equilibrium. It is a measure of the solubility of the solute in the solvent.
Solubility is a measure of a compound's ability to dissolve in a particular solvent at a particular temperature and pressure.According to the common ion effect, the presence of a common ion decreases the solubility of a substance in solution.
Because Na2CrO4 and Ag2CrO4 are both soluble in water, they will dissociate into their constituent ions when dissolved in water according to the following reactions:Na2CrO4 → 2Na+ + CrO42-Ag2CrO4 → 2Ag+ + CrO42-When Ag2CrO4 dissolves in a Na2CrO4 solution, however, the addition of the common chromate ion, CrO42-, will push the above equilibrium to the left, resulting in a decrease in the amount of Ag2CrO4 that dissolves.
As a result, when Ag2CrO4 is dissolved in a Na2CrO4 solution, its molar solubility decreases. In other words, x > y.
Learn more about molar solubility here:
brainly.com/question/28170449
#SPJ11
Did you know that dihydrogen monoxide (DHMO), hydric acid, kills over 4,000 people a year and can injure or seriously hurt thousands more? It’s in the food you will eat today and in everything you drink. Yet the government does not outlaw this dangerous chemical compound. Links to an external site. What can we do to fix this?
Water, a naturally occurring and vital component for life on Earth, is really known chemically as dihydrogen monoxide (DHMO). When consumed in moderation, it is not dangerous.
Dihydrogen monoxideThe claim you made appears to be a well-known internet hoax that has been circulated for a while. It is frequently used in jokes and satire to highlight how quickly false information and fear-mongering can spread.
It is crucial to rely on reliable sources and scientific facts when analyzing information, especially when it comes to health and safety, to address your concern. To assist people in recognizing and avoiding misleading or inaccurate information, it is also crucial to encourage critical thinking and media literacy.
In other words, since dihydrogen monoxide is a fundamental substance required for existence, there is nothing to "repair" in regard to it. Instead, in order to assure accurate and trustworthy knowledge, we should concentrate on information verification and the advancement of scientific literacy.
learn more about dihydrogen monoxide here
https://brainly.com/question/29094259
#SPJ1
The epithelial cells of the proximal convoluted tubule are adapted for reabsorption by: a. having thin walls. b. having rugae folds that increase surface area. c. secreting enzymes that activate absorption of substances. d. having microscopic projections called microvilli.
Answer: d. possessing tiny protrusions known as microvilli. The proximal convoluted tubule's epithelial cells have microvilli on their surface, which increases their surface area and improves.
the efficiency of reabsorption of chemicals from the filtrate back into the circulation. The cells do not release enzymes to promote absorption, and the rugae folds and thin walls are not adaptations for reabsorption. The proximal convoluted tubule's epithelial cells are in charge of reabsorbing vital components from the glomerular filtrate, including glucose, amino acids, and electrolytes. Many microvilli, which are tiny finger-like projections on the surface of the cell that enhance the surface area accessible for reabsorption, are present in the cells, which enable them to perform this role. This modification makes it possible for chemicals to be reabsorbted more effectively as they move through the tubule. The rugae folds and thin walls, on the other hand, have little impact on reabsorption in the proximal convoluted tubule. In this region of the nephron, reabsorption likewise does not include enzyme secretion.
learn more about microvilli here:
https://brainly.com/question/30871186
#SPJ4
Only the first and second choices are correct.
Polysaccharides always:
Please choose the correct answer from the following choices, and then select the submit answer button.
are a string of three or more sugar molecules.
are polymers.
contain lipids.
All of the above are correct.
Only the first and second choices are correct.
The correct option will be only the first and second choices are correct.
What are Polysaccharides?Polysaccharides, in general, are carbohydrates that contain a large number of monosaccharide units bonded by glycosidic bonds. Polysaccharides are the polymers in which the monomer is a sugar molecule. Polymers are large molecules made up of many smaller molecules connected together.
In this case, the smaller molecules are monosaccharides, which are combined to form polysaccharides. Polysaccharides are formed when three or more monosaccharides join together to form a chain.
The correct option is that only the first and second choices are correct.
Learn more about Polysaccharides here:
https://brainly.com/question/780562
#SPJ11
salts are composed of both cations and anions, both of which can potentially affect ph. which of the following salts would you test if you wanted to observe how just anions affect ph? group of answer choices nach3coo cacl2 nahco3 tris-hcl na2co3 nh4cl
The salt which you would test if you wanted to observe how just anions affect pH is Na2CO3.
What is salt? Salts are inorganic compounds made up of a cation and an anion. Salts are formed by the neutralization of an acid with a base, for example, hydrochloric acid and sodium hydroxide form table salt: NaCl. The cation is typically a metal or a positively charged organic compound, whereas the anion is generally a non-metal or a negatively charged organic compound. The salt's properties are a function of the cation and anion and are hence unique.
Salt's effect on pH: Salts are made up of cations and anions, both of which can have an impact on pH. Cations and anions can both have an impact on the pH of the solution, but they can do it in different ways. The pH of a solution can be affected by the anion of the salt since it can act as a base or an acid. The pH of a solution can be affected by the cation of the salt since it can act as an acid or a base. For instance, if we dissolve copper sulfate in water, the pH of the solution will be acidic since the sulfate ion will be hydrolyzed to create sulfuric acid, H2SO4.
However, if we dissolve sodium carbonate in water, the pH of the solution will be basic because the carbonate ion acts as a base, picking up H+ ions from water molecules to generate HCO3- ions. Hence, Na2CO3 is the salt which you would test if you wanted to observe how just anions affect pH.
To learn more about "cations and anions", visit: https://brainly.com/question/28971609
#SPJ11
does the buffering system appear to be neutralizing all acidity associated with atmospheric carbon dioxide
The buffering system does not appear to neutralize all acidity associated with atmospheric carbon dioxide. Acid-base buffering is a physiological mechanism that maintains the pH of a solution within a certain range by resisting changes in the acidity or basicity of the solution.
It achieves this by utilizing a weak acid and its corresponding weak base, which can accept or donate H+ ions as required.
The buffering system reacts with the atmospheric carbon dioxide to form carbonic acid. The carbonic acid dissociates into hydrogen ions and bicarbonate ions, which are regulated by the lungs and kidneys. When the concentration of atmospheric carbon dioxide increases, it increases the concentration of hydrogen ions in the blood, reducing the pH of the blood.
As a result, the body increases ventilation to eliminate excess carbon dioxide, returning the pH to its normal range. The buffering system does not neutralize all of the atmospheric carbon dioxide acidity; instead, it helps to maintain the pH of the body within a certain range.
Learn more about acid: https://brainly.com/question/25148363
#SPJ11
how would the value of the atomic mass of the metal calculated be affected if the hot metal sample cooled off before it was transferred to the water in the calorimeter? would it be too high or too low?
The value of the atomic mass of the metal calculated would be too high if the hot metal sample cooled off before it was transferred to the water in the calorimeter.
How is atomic mass calculated?The atomic mass of an element is defined as the mass of an atom of an element in atomic mass units (amu). One atomic mass unit is defined as 1/12th of the mass of an atom of carbon-12.
The atomic mass of an element can be calculated using the following formula:
Atomic mass = (mass of isotope 1 × % abundance of isotope 1) + (mass of isotope 2 × % abundance of isotope 2) + (mass of isotope 3 × % abundance of isotope 3) + ...
If the hot metal sample cooled off before it was transferred to the water in the calorimeter, the temperature of the sample would have decreased. The decrease in temperature would result in a decrease in the thermal energy of the sample. Consequently, the amount of heat absorbed by the water in the calorimeter would decrease, leading to a lower value of the heat capacity of the metal.
Since the heat capacity is directly proportional to the mass of the sample, a lower value of the heat capacity would lead to a higher value of the atomic mass of the metal calculated. Therefore, the value of the atomic mass of the metal calculated would be too high if the hot metal sample cooled off before it was transferred to the water in the calorimeter.
Learn more about atomic mass here: https://brainly.com/question/3187640.
#SPJ11
Write a chemical equation for HNO3(aq) showing how it is an acid or a base according to the Arrhenius definition.Express your answer as a chemical equation. Identify all of the phases in your answer.Part CWrite a chemical equation for HF(aq) showing how it is an acid or a base according to the Arrhenius definition.Express your answer as a chemical equation. Identify all of the phases in your answe
Part A The chemical equation for HNO3 showing it is acid is:-
HNO3 (aq) → H+ (aq) + NO3- (aq)
The phases are HNO3 (aq) = aqueous solution, H+ (aq) = aqueous solution and NO3- (aq) = aqueous solution.
Part B The chemical equation for HF showing it is acid is:-
HF (aq) → H+ (aq) + F- (aq)
The phases are HF (aq) = aqueous solution, H+ (aq) = aqueous solution, and F- (aq) = aqueous solution.
HNO3 (aq) is an acid according to the Arrhenius definition because the chemical substance HNO3 (nitric acid) dissociates in an aqueous solution to release hydrogen ions (H+).
HF (aq) is an acid according to the Arrhenius definition because the chemical substance HF (hydrofluoric acid) dissociates in an aqueous solution to release hydrogen ions (H+).
Learn more about Arrhenius:
https://brainly.com/question/14739712
#SPJ11
isotopes are different forms of an element that have different ______.
Isotopes are different forms of an element that have different atomic masses. The number of protons in each atom of an element will remain the same, but isotopes of an element will have different numbers of neutrons, leading to different atomic masses.
Isotopes are different forms of an element that have different numbers of neutrons in their nuclei. The number of neutrons in an atom can vary from one to several, depending on the element. Isotopes are atoms of an element that differ in the number of neutrons present in their nucleus. The atomic number of an element is determined by the number of protons present in the nucleus. However, the isotopes of the same element differ in their mass numbers. The atomic mass of an element is determined by the number of protons and neutrons present in the nucleus.
The atomic number of an atom is the sum of the number of protons in the nucleus and the number of electrons in a neutral (non-ionized) atom. Each atomic number designates a particular element, but not an isotope; the number of neutrons in an atom of a given element can vary widely. Each isotope of an element has a particular mass number, which is determined by the number of nucleons (both protons and neutrons) in the nucleus. Therefore, the isotopes of an element have different atomic masses.
Isotopes can be radioactive or stable, depending on the number of neutrons present in the nucleus. For instance, carbon-14 is a radioactive isotope of carbon, while carbon-12 is a stable isotope.
For more such questions on Isotopes , Visit:
https://brainly.com/question/14220416
#SPJ11
write a balanced chemical equation, including physical state symbols, for the decomposition of solid mercury(ii) oxide (hgo) into liquid mercury and gaseous dioxygen.
The balanced chemical equation for the decomposition of solid Mercury (II) oxide (HgO) into liquid Mercury and gaseous Dioxygen is:
[tex]HgO (s) \rightarrow Hg (l) + O_2 (g)[/tex]
Mercury (II) oxide, HgO, is a stable compound that may be decomposed by heating it to generate mercury metal and oxygen gas.
This reaction may be classified as a thermic decomposition reaction because it is initiated by heat. The equation is balanced as there is one atom of mercury on the left-hand side and one on the right-hand side.
Similarly, there are two atoms of oxygen on the left-hand side and two on the right-hand side. The physical state of HgO is solid, whereas the physical state of Hg and [tex]O_2[/tex] is liquid and gaseous, respectively.
To learn more about balanced chemical equation refer - https://brainly.com/question/14228953
#SPJ11
The molecules of a substance diffuse through a medium. The diffusion is one-dimensional. After a time to the molecules have diffused a distance Ro. What distance will the molecules have diffused after a time of 3'To? a. 2.45*Ro b. 3.00*Ro c. 4.24.Ro d. 1.73*Ro e. 9,00*Ro
The distance molecules diffuse in a medium is an example of diffusion after a tie of 3'To is 1.73 × Ro. Thus, the correct option is D.
What is diffusion?Diffusion is a physical process that occurs when molecules in a substance move from a region of high concentration to a region of lower concentration until a uniform concentration is obtained. The molecules continue to move even after the concentration is uniform, but at a slower rate.
One-dimensional diffusion is a special case of diffusion that occurs in a straight line, with no other directions being affected. It only occurs in one direction, resulting in a change in concentration. For instance, diffusion across a flat surface. Formula to calculate distance traveled in time T using one-dimensional diffusion is:
Ro² = 2D × T
where, Ro is the distance traveled by the molecules in time T, and D is the diffusion coefficient of the substance in the medium.
The distance that the molecules will have diffused in a time of 3'To will be: Ro×√3. Using the formula of one-dimensional diffusion and solving for the distance Ro, we have:
Ro² = 2D × To
Solving for Ro, we get: Ro = √2D × To
After a time of 3'To, the molecules would have traveled a distance of Ro × √3.
Therefore, the correct option is D.
Learn more about Diffusion here:
https://brainly.com/question/14852229
#SPJ11
The student decides to determine the molarity of the same Na2CO3 solution using a second method. When Na2CO3 is dissolved in water, CO3 ^2−(aq) hydrolyzes to form HCO3 ^−(aq), as shown by the following equation.CO3 2−(aq) + H2O(l) HCO3 −(aq) + OH−(aq) Kb = [HCO3^ -][OH^- ]/ [CO3^2- ] - - - = 2.1 × 10^−4explain how the student could use the measured value in part (f)(i) to calculate the initial concentration of co3-2 (aq). (do not do any numerical calculations.)
To calculate the initial concentration of CO32- (aq), the student can use the measured value from part (f)
(i) to calculate the equilibrium concentration of HCO3- (aq) and OH- (aq)
according to the equilibrium expression: Kb = [HCO3-]eq [OH-]eq / [CO32-]eq.
The student can then use the equilibrium concentrations to calculate the initial concentration of CO32- (aq) by solving the equilibrium expression for [CO32-]eq.
The initial concentration of CO32- (aq) is equal to the sum of the equilibrium concentrations of HCO3- (aq) and OH- (aq).
to know more about equilibrium refer here:
https://brainly.com/question/30807709#
#SPJ11
Read through each scenario. Under the scenario, write which lab safety rule is being broken.
Explanation:
1. Carlos is using unknown chemicals, which is breaking the rules that state: "Treat every chemical hazardous" and "No chemical should be taken without proper authorisation".
2. Jane doesn't know where the eye-wash station is, so she is breaking Rule #1: "Know locations of laboratory safety showers, eyewash stations, and fire extinguishers. The safety equipment may be located in the hallway near the laboratory entrance."
3. Harry has broken the rule that says that "No horseplay will be tolerated." He has turned on the hot plate without instruction.
4. Brent is eating in class. Eating in laboratories where hazardous materials are present is prohibited, yet he still eats a bagel. He is at risk of food poisoning.
5. Sniffing or tasting chemicals can be dangerous or even deadly as the vapours or fumes can contain traces of unknown toxins.
6. She should be more careful, and according to lab safety rules, she should put her bag in the designated areas and work independently unless she is told by her instructor to do otherwise.
7. Rachel should dress for the lab. If she doesn't and her clothes react badly to the chemicals, it would pose serious health problems.
8. I don't know about this question.
9. Water can act as a reactant, so the chemical in the sink may damage the lab or outside pipes if corrosive. Experiments should be left in the lab unless told to do otherwise by the instructor.
10. Clean up at the end of lab. In this situation, Diana and Mike didn't clean up thoroughly, which can damage their bench top.
11. Jake is performing experiments without permission. He may become a threat to himself if his body gets contaminated.
12. The experiments wouldn't be conducted correctly, which may contaminate the students around them or damage the lab. Heather and Jennifer might pose a threat to the lab.
13. Again, tasting or smelling lab materials are strictly prohibited. Rebecca may harm her digestive system if she tries an unknown salt.
14. Unwanted reactions may occur, and the result might be acidic, corrosive, contaminate the surrounding area or discolour some places.
15. Because if we do not follow procedures and rule, we may damage some tools or fellow students.
."Scientists believe the amygdala is responsible for emotion."
What is the best definition for responsible as it is used in the previous
quote?
A Liable to be called on to answer
B. Having the job or duty
C. Politically answerable
D. Able to answer for one's conduct and obligations
D. Able to answer for one's conduct and obligations
What is the amygdala?The amygdala is a pair of almond-shaped structures located in the brain's temporal lobes. It is part of the limbic system, which is involved in the processing of emotions and memory. The amygdala is involved in the formation of memories associated with emotional events, as well as the reaction to those memories.
The amygdala also plays a role in the regulation of the body's fight-or-flight response, which is the autonomic nervous system's response to danger or perceived danger. It is thought to be involved in the formation of fears and phobias, as well as the development of aggressive behaviors. In addition, the amygdala is believed to be involved in the processing of social cues, such as facial expressions and body language.
Learn more about the amygdala here:
https://brainly.com/question/24171355
#SPJ1
An amine that is insoluble in water can be made to dissolve by adding it to an aqueous solution of Select one: O a. HCI O b. NaOH O c. an amide O d. none of the above; it can't be made water soluble
An amine that is insoluble in water can be made to dissolve by adding it to an aqueous solution of NaOH.
Therefore, option b. NaOH is correct option.
An amine is an organic compound with the formula RNH2 or R2NH or R3N, where R is an alkyl or aryl group. Amines are a type of derivative of ammonia, with one or more hydrogen atoms replaced by organic substituents.
Amines are classified as primary, secondary, or tertiary depending on the number of substituents attached to the nitrogen atom. Furthermore, they are weak bases, with aqueous solutions having pH values greater than 7 because of the presence of the amino group. When amines dissolve in water, they can act as either Bronsted-Lowry bases or Lewis bases. However, most amines are insoluble in water.Water-soluble amines Amines, despite being basic compounds, are often insoluble in water, which is a polar solvent.
As a result, they may be made water-soluble by reacting with acids. For instance, when an amine is added to an aqueous solution of hydrochloric acid, the amine ionizes and dissolves in the acidic solution. Water-soluble salts, such as ammonium chloride, are formed. Other acid-based techniques for making amines water-soluble include reacting them with sulfonic acids and oxoacids. Amines with low molecular weight are also soluble in water because they can form hydrogen bonds with water molecules.Solubility in water may be achieved by adding an amine to an aqueous solution of NaOH, which serves as a base, neutralizing the amine and making it soluble. Water-insoluble amines are converted to water-soluble compounds when they react with NaOH.
for such more question on amine
https://brainly.com/question/9631835
#SPJ11
Enzyme A has a very broad pH optimum and exhibits the same catalytic activity at pH 6.5, as at pH 8.5. However, a competitive inhibitor, X, is effective at pH 6.5, but not at pH 8.5. Explain this observation. NOTE: Your answer must include potential effect(s) of pH 8.5 on X.
Enzyme A has a broad pH optimum, which means that it is able to function at a wide range of pH levels. Its catalytic activity is the same at pH 6.5 as it is at pH 8.5. A competitive inhibitor, X, is able to stop the enzyme from functioning at pH 6.5, but not at pH 8.5. This is because the environment at pH 8.5 is different from that at pH 6.5, and the pH 8.5 environment is not conducive for X to interact with the enzyme and block it from functioning.
At pH 8.5, the inhibitor X is less active because the higher pH causes the inhibitor to become more positively charged, thus making it less able to bind to the active site of the enzyme. Furthermore, the increased pH causes the enzyme to become more positively charged, reducing the electrostatic attraction of the inhibitor. As a result, the enzyme is able to function at pH 8.5, even in the presence of the inhibitor X.
In summary, the broad pH optimum of enzyme A means that it can remain active at both low and high pH values, while the competitive inhibitor X is only active at lower pH levels due to its reduced ability to interact with the enzyme at higher pH.
To know more about competitive inhibitor visit:-
https://brainly.com/question/30837079
#SPJ11
Give the approximate bond angle for a molecule with an octahedral shape. 109.5° 180° 120 O 105° 90° QUESTION 3 What is the hybridization of the orbitals on carbon in C2H4?
1. The approximate bond angle for a molecule with an octahedral shape is 90 degree. so, option (e) is correct.
2. The hybridization of the orbitals on carbon in C2H4 is SP2 hybridization.
The octahedral shape of molecules is defined as the shape of molecules where six atoms or ligands or groups of atoms are arranged in a systematic way around a central dogma or atom. The Octahedral Shape of Molecules contains eight faces and the band angel is 90 degree. It consists of two square pyramids back to back each square pyramid with four faces.
In sp² hybridization is defined as the hybridization where one s orbital and two p orbitals hybridize to form three sp² orbitals each of this consisting of 33% s character and 67% p character. SP2 hybridization is required whenever an atom is surrounded by three groups of electrons.
To learn more about octahedral shape
https://brainly.com/question/30160815
#SPJ4
The complete question is,
1. Give the approximate bond angle for a molecule with an octahedral shape.
a. 109.5°
b. 180°
c. 120
d. 105°
e. 90°
2. What is the hybridization of the orbitals on carbon in C2H4?
Please Help me with this question, No.4
17.0 g of Al₂O₃ forms from 16 g of O₂ and excess Al ,and when the molar mass of Al₂O₃ is 102 g/mol.
What is molar mass?Molar mass is the mass of one mole of a substance. It is usually expressed in units of grams per mole (g/mol). For example, the molar mass of carbon is 12.01 g/mol, which means that one mole of carbon has a mass of 12.01 grams. Molar mass is useful in chemistry because it allows us to convert between mass and moles of a substance, which is important for many chemical calculations.
The molar mass of Al₂O₃ is 102 g/mol, which means that for every 102 g of Al₂O₃ produced, 3 × 32 g (or 96 g) of O₂ is consumed.
We can use this ratio to find the mass of Al₂O₃ formed from 16 g of O₂:
96 g of O₂ produces 102 g of Al₂O₃
1 g of O₂ produces (102 g / 96 g) of Al₂O₃
16 g of O₂ produces (102 g / 96 g) × 16 g = 17.0 g of Al₂O₃
To know more about Molar mass, visit:
https://brainly.com/question/22997914
#SPJ1
The model for the atom that was understood when Bohr made his contributions was called the:
Select the correct answer below:
planetary model
plum pudding model
solid sphere model
quantum model
The model for the atom that was understood when Bohr made his contributions were called the option (A) Planetary Model.
What is the Bohr's Model?Bohr's model, also known as the Planetary model, is a basic model of the atom that explains the atomic structure. The atomic nucleus is in the center of the atom, with electrons moving in circular orbits about it at different energy levels.
The model is called the planetary model because it resembles the planets in the solar system revolving around the sun. The electrons are arranged in concentric circles around the nucleus, with each circle corresponding to a specific energy level.
In summary, when Bohr made his contributions, the model for the atom that was understood was called the Planetary Model.
To know more about the planetary model:
https://brainly.com/question/30790603
#SPJ11
A chemist heats the block of gold as shown in the interactive, then places the metal sample in a cup of oil at 25.00 °C instead of
a cup of water. The temperature of the oil increases to 26.52 °C. Calculate the mass of oil in the cup. The specific heat of gold is
0.129 J/g °C and the specific heat of oil is 1.74 J/g °C.
moil =
$
4
d
%
5
<
6
MacBook Air
FG
&
7
3
F7
00 *
8
DII
FB
9
DD
F9
O
4
F10
4
F11
+ 11
Do
8
√3)
F12
Select all of the following molecules that contain stereocenters.-alkene with H wedges and CH3 dash-both 1,2-dimethylcyclohexane-cyclohexane with wedge-dash methyl
The stereocenter-containing molecule is:
1,2-dimethylcyclohexane (both carbons at position 1 and 2 are stereocenters as they have four distinct substituents connected to them)
(both carbons at position 1 and 2 are stereocenters as they have four different substituents attached to them)
Stereocenters are absent from the other compounds that were listed. Because the double bond does not include any substituents that are distinct from one another, the alkene with H wedges and the CH3 dash does not have stereocenters. As all of the carbons in cyclohexane are symmetric and do not have four separate substituents connected to them, the cyclohexane with wedge-dash methyl likewise lacks stereocenters., the only molecule in the list that contains stereocenters is 1,2-dimethylcyclohexane.
learn more about stereocenter-containing here:
https://brainly.com/question/23096013
#SPJ4
