When iron(III) oxide (Fe2O3) is exposed to carbon monoxide (CO) under high pressure, metallic iron (Fe) and carbon dioxide (CO2) are produced. Write and balance the reaction equation

When Iron(III) Oxide (Fe2O3) Is Exposed To Carbon Monoxide (CO) Under High Pressure, Metallic Iron (Fe)

Answers

Answer 1

Answer:

The equation is Fe₂O₃ + CO ⇒ Fe + CO₂.

The balanced reaction equation is Fe₂O₃ + 3CO ⇒ 2Fe + 3CO₂.

Explanation:

First, we have to write our equation. It's actually pretty straightforward - first we look for our reactants (looks like it's Fe₂O₃ and CO), then we look for our products (Fe and CO₂). Then, we have to balance it so that both sides have the same number of both element.

Currently, we have the equation Fe₂O₃ + CO ⇒ Fe + CO₂. There are 2 Fe atoms, 4 O atoms, and 1 C atom on the left side. There is 1 Fe atom, 2 O atoms, and 1 C atom on the right side.

First thing we can do is give our Fe on the right side a coefficient of 2. This will make it equivalent to the 2 Fe atoms on the left side:

Fe₂O₃ + CO ⇒ 2Fe + CO₂

Next, we need to make sure that we have the same number of C and O atoms on each side. This takes a little bit of thinking, but what we have to do is give CO a coefficient of 3 and CO₂ a coefficient of 3. This gives us 6 O atoms on the left side (when we include the O₃) and 6 O atoms on the right side (since there are 3 O₂ atoms and 3 times 2 is 6). Here's what that looks like:

Fe₂O₃ + 3CO ⇒ 2Fe + 3CO₂

And that's how I balanced the equation. It can be confusing, but with enough practice, it will get easier and easier. :)


Related Questions

Mixture of a 25.00 mL aliquot of the sample solution with 5.00 mL of a 0.250 ppm warfarin standard yielded a solution with an intensity of 670. Calculate the percentage of warfarin in the sample.

Answers

Answer:

750

Explanation:

Select all the correct answers.

To formulate hypotheses and construct theories, astronomers analyze data. This analysis helps them find trends that may exist. Which two statements does the data in this table support? If you’re not sure, take a guess.
A. The farther a planet is from the Sun, the longer its orbital period is.
B. Planets with a greater diameter have longer days.
C. The closer a planet is to the Sun, the greater its axial tilt is.
D. Planets with greater mass tend to have more moons.

Answers

Answer: A. The farther a planet is from the Sun, the longer its orbital period is, and D. Planets with greater mass tend to have more moons.

Explanation: trust

Given: 800 mL of 2.5 M NaCl. Find grams of NaCl needed

Answers

Answer:

Answer: molar mass of NaCl is 58.5 gm/mol. This refers to the fact that 1 mole of NaCl weighs 58.5 gram.

Explanation:

What is the mole ratio between FeCl3 and Fe(C5H7O3)3 ?

Answers

Answer:      162.2 g FeCl3. mL of soln = 0.07028 mol FeCl3x ... mol FeCl3 = mol Fe(OH)3 = 0.01291 mol ... (a) MaVa = MbVb since HCl and KOH react in a 1:1 molar ratio.

Explanation:

Hi! ❤️ , im looking for some help here. ill give brainliest if able to.

Answers

A student builds a model of a race car. The scale is 1:15. In the scale model, the car is 8 cm tall. How tall is the actual car?

Answers:

A. 120 cm

#CarryOnLearning

Fine rice and wheat are homogeneous or heterogeneous​

Answers

Answer:Heterogeneous

Explanation:they can be separated by using the method of winnowing

Use the choose reaction drop down menu to see other equations, and balance them. Check your answers and then write the balanced equations. AI+ HCI-> AICI3+ H2

NaCI -> Na + CI2

Na2S + HCI -> NaCI + H2S​

Answers

3 and then you do that yea

Identify the reactant that gets oxidized in the following reaction.

2 AgNO₃(aq) + CaI₂(aq) → 2 AgI(s) + Ca(NO₃)₂(aq)

A) Ag in AgNO₃
B) I in CaI₂
C) N in AgNO₃
D) Ca in CaI₂
E) This is not an oxidation/reduction type of reaction

Answers

Answer:

E) This is not an Oxidation/ Reduction type of reaction

Explanation:

Oxidation involves the loss of electrons while reduction involves the addition of electrons. None of the elements change their oxidation number in the reaction, so this is not an oxidation/reduction type of reaction.

The addition of oxygen and the removal is electrons is called oxidation. In a reaction that has both the process is called the redox reactions.

The correct answer to the question is option E

In this reaction, not any elements have the loose and gain the electrons in order to tell the oxidation and reduction.

This reaction is a neutralization reaction.

Hence, the correct answer is E that is not an oxidation/reduction type of reaction.

For more information, refer to the link:-

https://brainly.com/question/3523174

giving brainly for correct answer! :)

Answers

Answer:

Mass is the amount of matter in an object

Answer:

Mass

Explanation:

matter is weighed by the mass of an object

convert 3.49g/cm³ to kg/m³​

Answers

1 g/cm3 to kg/m3 = 1000 kg/m3

3.49 g/cm³= 3.49 x 1000

                 = 3490 kg/m³​

Ans: 3490 kg/m³​

An initial solution of orange juice has a solute concentration of 0.50 M and a volume of 155.0 mL. What is the final solute concentration of the juice after its been diluted with 52.5mL of water?

Answers

Answer:

0.37 M

Explanation:

An initial solution of orange juice has a solute concentration of 0.50 M and a volume of 155.0 mL. What is the final solute concentration of the juice after its been diluted with 52.5mL of water?

the old molarity was 0.50 M, and a volume of 1555.0 ml

the new volume is a total of 155.0 ml + 52.5 ml =207.5 ml

so the new molarity is (155.0/207.5) X 0.50 M = 0.37 M

How many molecules of aspartame are present in 1.00 mg of aspartame?

Answers

Answer:

0.2 x 10^19

Explanation:

In order to complete a reaction, a chemist needs to react 4 moles of aluminum atoms with 3 moles of oxygen molecules. How many grams of aluminum would be required to make this happen?

Answers

Answer:

4 Al + 3 O2 → 2 Al2O3

To react with 4 moles of Al, (3×32) g oxygen is required.

So, to react with 2.4 moles of Al, {(3×32)/4} × 2.4 = 57.6 g oxygen is required.

Hope this helps.

Which two characteristics determine the strength of the gravitational force
between two objects?
A. The distance between the objects' centers
B. The distance between the objects' surfaces
C. The amount of matter in the objects
D. The total volume of the objects

Answers

Answer:

A and C

Explanation:

I took the test

The distance between the objects' centers and The amount of matter in the objects are two characteristics determine the strength of the gravitational force between two objects.

What is Gravitational force?

All objects with mass or energy are attracted to one another by gravity, which is a fundamental interaction.

The electromagnetic force, the weak interaction, and the strong interaction are all significantly stronger than gravity, which is by far the weakest of the four fundamental interactions.

As a result, it has no appreciable impact on subatomic particle level phenomena. However, at the macroscopic level, gravity is the most important interaction between objects and governs the motion of planets, stars, galaxies, and even light.

Therefore, The distance between the objects' centers and The amount of matter in the objects are two characteristics determine the strength of the gravitational force between two objects.

To learn more about Objects, refer to the link:

https://brainly.com/question/14964361

#SPJ2

pls help i am in 8th grade k12

Answers

Answer:

zzxdczxc V

Explanation:

An exothermic reaction releases 86.5 kJ. How many kilocalories of
energy are released?

Answers

Since 1 calories is 4.1858 Joules, 86.5kJ is 86.5 x (1/4.1858) = 20.66510583 kCal = 20.7 kCal (3 s.f)

How many peaks will you observe in the 13C spectrum of cyclohexane ?
1 1 - incorrect
3
6

Answers

3 peaks

Explanation:

You can do this perfectly well without referring to chemical shift tables at all. In the spectrum there are a total of three peaks - that means that there are only three different environments for the carbons, despite there being four carbon atoms.

How do I calculate the pH of the solution given the following [H3O+] or [OH−] values?[OH−] = 4.0×10^−11 M?


pH= _______

Answers

I think it’s i have no clue

Sắp xếp 4 axit sau theo thứ tự tính axit tăng dần:
CH3-CH2-CH2-COOH (1), CH3-CH2-CHCl-COOH (2)
CH3-CHCl-CH2-COOH (3), CH2Cl-CH2-CH2-COOH (4

Answers

CH3CH2CHClCOOH > CH3CHClCH2COOH > CH2ClCH2CH2COOH > CH3CH2CH2COOH
(2)>(3)>(4)>(1)

nkkljihghjhytuyftghvnvm
jkhjkhjkh

Answers

Answer:

seriously ....,........

I don't like chemistry

U ever get an answer

Answers

yesn’t. they are either wrong or links

A \pu{1.60 g}1.60 g1, point, 60, space, g calcium supplement contains 37.8\%37.8%37, point, 8, percent \ce{Ca}CaC, a by mass. The calcium is present in the supplement as \ce{CaCO3}(s)CaCOX 3 ​ (s) (molar mass \pu{100.09 g/mol}100.09 g/mol100, point, 09, space, g, slash, m, o, l). How many grams of \ce{CaCO3}(s)CaCOX 3 ​ (s) are in the calcium supplement?

Answers

A 1.60 g calcium supplement that contains 37.8% Ca by mass, contains 1.51 g of CaCO₃.

We want to calculate the mass of CaCO₃ in a 1.60 g supplement. We need to consider the following relationships.

The mass percent of Ca is 37.8%, that is, there are 37.8 g of Ca every 100 g of supplement.The molar mass of Ca is 40.08 g/mol.The molar ratio of Ca to CaCO₃ is 1:1.The molar mass of CaCO₃ is 100.09 g/mol.

[tex]1.60gSup \times \frac{37.8gCa}{100gSup} \times \frac{1molCa}{40.08gCa} \times \frac{1molCaCO_3}{1molCa} \times \frac{100.09gCaCO_3}{1molCaCO_3} = 1.51gCaCO_3[/tex]

A 1.60 g calcium supplement that contains 37.8% Ca by mass, contains 1.51 g of CaCO₃.

Learn more: https://brainly.com/question/14990953

A 1.60 g calcium supplement contains 37.8% Ca by mass. The calcium is present in the supplement as CaCO₃(s) (molar mass 100.09 g/mol). How many grams of CaCO₃(s) are in the calcium supplement?

The formation of aluminum chloride can be described by the balanced chemical equation. 2Al+3Cl2⟶2AlCl3 How many moles of Cl2 molecules are required to react with 3.90 mol Al atoms? moles of Cl2 required

Answers

moles(AL)/moles(CL2) = 2/3

moles(CL2) = 3/2 * 3.90

moles(CL2) = 5.85 mol

which best describes how heat energy moves within the system?

Answers

Answer: B

Heat always travels from warmer areas to cooler areas in the form of radiation or convection currents due to the temperature difference. You could kind of think of this movement like diffusion: travelling from a higher concentration to a lower one (if you take biology). This is how a gas heats up a pan on the stove or a radiator warms a room

When performing an experiment, the following footwear is best

Answers

Answer:

sneakers

Explanation:

Answer:

closed toe shoe

Explanation:

becusae if a cemcal spills it cant hurt your feet

The student burns 10 g of magnesium in air to produce magnesium oxide (MgO).
2Mg + 0 + 2MgO
Calculate the maximum mass of magnesium oxide that could be produced in the reaction.

Answers

Answer:

x=403/24,3 = 16.58 gm MgO

EXPLANATION

The student burns 10 g of magnesium in air to produce magnesium oxide (MgO)

2Mg + 0 + 2MgO

Calculate the maximum mass of magnesium oxide that could be produced in the reaction.

Oxygen exist in nature as O2, diatomic.

so

The student burns 10 g of magnesium in air to produce magnesium oxide (MgO).

2Mg + 02 + 2MgO

Calculate the maximum mass of magnesium oxide that could be produced in the reaction.

2 moles of Mg produce 2 moles of MgO

1 mole of Mg weighs 24.3 and produces 1 mole of MgO

Mg HAS AN ATOMIC MASS OF 24.3

Mg HAS A MOLAR MASS OF 24.3 +16 = 40.3gm/mole

so 24.3 gm of Mg produce 40.3 gm MgO

set up the ratio

10 gm Mg/x of MgO  = 24.3/40.3

or

10/x = 24.3/40.3

cross multiply and isolate x (use Algebra I)

24.3x =403

x=403/24,3 = 16.58 gm MgO

Convert 21 grams of radon into atoms of radon.

Answers

Answer:

The atomic mass of radon is 222.

Explanation:

. That means that one mole of radon weighs 222 grams (222 grams/moles). We can therefore make the following equation:

Grams × (1/222) = Moles of Radon

Lattice energy is_______________ proportional to the distance between two ions in an ionic compound; therefore, the compound with the smaller lattice energy will have the _________________ distance between the ions.

Answers

Lattice energy is inversely proportional to the distance between two ions in an ionic compound; therefore, the compound with the smaller lattice energy will have the larger distance between the ions.

Discussion;

The lattice energy of an ionic compound is a measure of the strength of the bond in the compound.

The lattice energy is Inversely proportional to the distance of the atoms apart.

Read more:

https://brainly.com/question/24228788

what is a nucleus and what are the functions?

Answers

nucleus, in biology, a specialized structure occurring in most cells (except bacteria and blue-green algae) and separated from the rest of the cell by a double layer, the nuclear membrane. This membrane seems to be continuous with the endoplasmic reticulum (a membranous network) of the cell and has pores, which probably permit the entrance of large molecules. The nucleus controls and regulates the activities of the cell (e.g., growth and metabolism) and carries the genes, structures that contain the hereditary information

Fission is the of a heavy nucleus into two smaller nuclei. This process is used in __________ .

Answers

Nuclear Fission

Nuclear fission, subdivision of a heavy atomic nucleus, such as that of uranium or plutonium, into two fragments of roughly equal mass. The process is accompanied by the release of a large amount of energy. In nuclear fission the nucleus of an atom breaks up into two lighter nuclei.

Nuclear fission is a process where the nucleus of an atom is split into two or more smaller nuclei, known as fission products. The fission of heavy elements is an exothermic reaction, and huge amounts of energy are released in the process.

Other Questions
Can someone answer this Recombination (crossing over) during prophase I of meiosis occurs when: Select all of the following that are ordered pairs of the given function.(x) = 3 - 2x Free Speech Regulated on Social Media pros and cons Which part of the South was more likely to favor secession?A. Appalachian MountainsB. border statesC. coastal citiesD. Deep SouthE. Upper South what i compound is FeI2 It takes 10 seconds to move 1 centimeter. How long will it take the snail to move 2.5 centimeters Good night people, how are you? Corporate bonds from Dagofi Radar are selling at 88. 354, bonds from Chambers Translation are selling at 112. 894, and bonds from Essentia Inc. Are selling at 96. 262. If Roger wants to buy two bonds with a par value of $1,000 each from Dagofi Radar, five bonds with a par value of $500 each from Chambers Translation, and four bonds with a par value of $1,000 each from Essentia Inc. , how much can he expect to spend? a. $8,439. 91 b. $8,500. 00 c. $2,975. 10 d. $9,343. 97. What is a solvent? please answerA. The material that is dissolvedB. The material that increases the speed of the dissolutionC. The material that reduces how much can be dissolvedD. The material that is dissolving another materialWILL MARK BRAINLIEST Why is the sculpture above an example of an environment sculpture?a.The stones are arranged so that they appear to have been placed there by natural forces.b.It was created using stones from the environment in which it is located in.c.The design of the stones is a geometric shape, common to environment sculptures.d.The stones are place in a river bed, which is a geographical landform.Please select the best answer from the choices providedABCD escucha de nuevo las lineas 15 a 18 y actua como un detective 2. Summarize the properties of the three types of triglycerides by completing the table. What is an activation energy Simplify:-0.2sqrt(x^2) Can someone please help me find the answers to this. Maybe you could attach a picture with the answers, or find an answer key online and show me how to see it. Please help! help me find the domain of Social advertisement means______________A) Which gives a social message B) The manufacture and advertising agencyC) Buyer and seller D) Commercial Advertisement Rainwater fills a crack in the rock. The water freezes in a cold climate. After the water thaws, it evaporates. The crack left behind is larger than it was originally. What is the physical weathering factor? Uhaul general mechanical questions 2021Not a question. But the answers. 1) The PRIMARY purpose of the dual rear tires on this truck is to: (A) Reduce the chance of a blowout. (B) Withstand a heavier load and add greater stability. (C) Add more weight to the rear of the truck.B2) Which of these tools should be used on a Phillips-head screw?B3) Which arrow points to the alternator?C4) With the truck backing up and the front tires turned as shown, which way will the rear of the truck swing?A5) Above are four tools. Three of the tools have a similar function while one is different. Which tool performs the most different function of the four tools?D6) Which scaffolding above could probably hold more weight?B7) Which refrigerator will be easier to roll over uneven ground?A8) Assuming the pick-up trucks, trailers and road conditions are exactly the same, which vehicle will take a longer distance to stop?B9) What is the proper battery cable connection when jumping two automotive batteries? (A) Negative to Negative / Positive to Positive (B) Negative to Positive / Negative to Positive (C) It doesn't matter on 12-volt automotive batteriesA10) Which of these filters is associated with airflow?A11) If a box of clothes weighing 10 lbs (4.5 kg) and a box of books weighing 10 lbs (4.5 kg) were placed on a scale, what is most likely to occur?C12) Which area will get the smoothest ride?B13) Which trailer has more downward pressure where it attaches to the car?A14) Which direction will wheel three rotate?B15) The tire above has a recommended tire pressure of 35 PSI, however, its current pressure is only 26 PSI. Which of the following could occur if driven on? (A) A tire blowout. (B) Unstable handling of the vehicle. (C) Both A & B.C16) Which is the proper position of the adjustable wrench for tightening a nut?A17) Which tire has more tread? (A) Image A (B) Image B (C) Cannot be determinedB18) Which picture best illustrates the correct location for loading ONLY the washer in this trailer?B19) Which is the MOST LIKELY use for the following object? (A) Checking for a vacuum source. (B) Checking for the proper voltage at the battery. (C) Checking for electrical current traveling through a wire.C20) If this truck backs up with the front tires turned as shown, which way will the rear of the trailer swing?B21) Which illustration best demonstrates the safest ladder for this person to use?A22) Which method requires the least amount of effort to move the refrigerator?A23) With the side gears turning in the direction shown, in which direction will the top gear turn?B24) In order for the Hitch ball to be secured properly, what should be the last part assembled? (A) Nut (B) Shank (C) Cotter PinC25) As the truck backs up, which way should the front tires be turned in order to make the trailer follow the road?B