When the equation,
O2 + __C 10H 22 →
CO2 +
H2O is balanced, the coefficient of O2 is?

Please help!

Answers

Answer 1
(10)O_2+C_10 H_22-->(10)CO_2+(11)H_2 O

This is the correct balanced equation

The coefficient would be (20) when you multiply 10 by 2

Related Questions

cesium-131 has a half life of 9.7 days. what percent of a cesium-131 sample remains after 60 days?

Answers

1.37% of cesium–131 will remain after 60 days

Explanation:

From the question given above, the following data were obtained:

Half-life (t½) = 9.7 days

Time (t) = 60 days

Percentage remaining after 60 days =?

Next, we shall determine the number of half-lives that has elapsed. This can be obtained as follow:

Half-life (t½) = 9.7 days

Time (t) = 60 days

Number of half-lives (n) =?

n = t / t½

n = 60 / 9.7

Finally, we shall determine the percentage remaining. This can be obtained as follow:

Let the original amount be N₀

Let the amount remaining be N

Number of half-lives (n) = 60 / 9.7

N = N₀ / 2ⁿ

Divide both side by N₀

N/N₀ = 1/2ⁿ

N/N₀ = 1 / 2⁽⁶⁰÷⁹•⁷⁾

N/N₀ = 0.0137

Multiply by 100 to express in percentage

N/N₀ = 0.0137 × 100

N/N₀ = 1.37%

Therefore, the percentage remaining after 60 days is 1.37%

NOTE; N/N₀ is the fraction remaining.

Learn more: https://brainly.com/question/14883322

Which phenomenon explained below is an example of deposition?
Select the correct answer below:

A) Hail is formed from water droplets lifted by air currents to an altitude where they turn into pellets of ice.

B) Frost forms when cold evening temperatures convert the humidity in the air to thin layers of ice on the ground.

C) In the winter, the top few inches of a pond turn to ice.

D) The visible cloud arising from a boiling tea kettle is not actually steam, but droplets of liquid water that form as the
steam cools in the air.

Answers

Answer:

b

Explanation:

deposition is when water turns from gas to solid. b is the only one that fits

Deposition is frost forms when cold evening temperatures convert the humidity in the air to thin layers of ice on the ground.

What is deposition?

Deposition is a process that involves collection of large mass or when mean distance between molecules are reduced. It can also be explained as gathering of substances together to form a larger mass.

Therefore, the phenomenon explained in the given example about deposition is frost forms when cold evening temperatures convert the humidity in the air to thin layers of ice on the ground.

Learn more about deposition here: https://brainly.com/question/6110024

Assume you have 4 solids (A, B, C and D) of similar mass. Which of these requires the greatest energy input to melt?


polar covalent

covalent network

ionic compound

nonpolar covalent

Answers

The solid that require the greatest energy input to melt by mass is the option;

Covalent network

Reason for the above answer is as follows;

The elementary particles of a solid are held together by bonds that require

an input of energy to unlock, and once broken, the particles are then able

to change location within their containing vessels with less restrictions

Types of bonds

Polar covalent molecular solids have the following characteristics;

a) Soluble in water b) Low melting point, b) Conduct electricity

Solids that are made up of a covalent network have the following characteristics

a) High melting point temperature b) Non conductive of electricity c) Not soluble in water

Solids of ionic compounds have the following characteristics;

a) High melting point temperature b) The liquid state and solution

conducts electricity c) Soluble in water

Solids that have nonpolar covalent bonds have;

a) Low melting point b) Normally in the gaseous or liquid state b) Not water soluble

Therefore, the covalent network, and the solids ionic compounds require the most energy to melt, however, the strength of the ionic bond in an ionic compound is a factor the charges present and the sizes of the atom, while

the covalent network solid, are combined to form essentially as a single

molecule and therefore require the greatest heat energy input break the bonds of the molecule down in order to melt

Learn more about the properties of the different types of bonds here;

https://brainly.com/question/13510199

https://brainly.com/question/21628972

https://brainly.com/question/14823280

state function and non state function ​

Answers

Answer:

State functions represent quantities or properties of a thermodynamic system, while non-state functions represent a process during which the state functions change. For example, the state function PV is proportional to the internal energy of an ideal gas, but the work W is the amount of energy transferred as the system performs work.

Explanation:

1.46 mol sample of nitrogen gas at a temperature of 14.0 °C is found to occupy a volume of 23.7 liters. The pressure of this gas sample is mm Hg​

Answers

Explanation:

Since there are no gas constant with the unit of mmHg, you just have to use the gas constant for atm, and then convert that into mmHg

Starting from (R)-3-methylhex-1-yne as the substrate at the center of your page, draw a reaction map showing the regiochemical and stereochemical outcome or outcomes for each of the following series of reagents. Name each of your products, including stereochemical designations for any chirality centers that are generated.

a. HgSO4, H2SO4, H2O
b. 1. 9-BBN; 2. H2O2, NaOH
c. Br2, CCl4
d. HBr

Answers

Solution :

A substrate is defined as the chemical species that are being observed in the chemical reaction where the substrate reacts with a reagent and forms a product. It can also be referred to the surface where some other chemical reactions are performed.

Stereochemistry is defined as the study of relative spatial arrangement of the atoms which forms the structure of the molecules and their respective manipulations.

In the context, the products including the stereochemical designations for any chirality centers starting from the  (R)-3-methylhex-1-yne as the substrate are attached below.  

Cho biết độ tan của NH4Cl trong nước ở 20oC và 70oC lần lượt là 37,2 g/100 gam nước và 60,2 gam/100 g nước. Hòa tan 166,8 gam NH4Cl vào 400 gam nước ở 70oC thu được dung dịch X. Sau đó, hạ nhiệt độ dung dịch X xuống 20oC. Tính khối lượng (gam) NH4Cl kết tinh lại trong X?

Answers

Answer: Hợp chất CTHH 0 °C 10 °C 20 °C 30 °C 40 °C 50 °C 70 °C

Actini(III) hydroxide Ac(OH)3   0,0022    

Amonia NH3 1176 900 702 565 428 333 188

Amoni azua NH4N3 16  25,3  37,1  

View 42 more rows  

                    hehe

1. A
a stiff structure that surrounds and
protects a coll: found in plant, fungus, and some bacteria cells.
2.
is living things consisting of many cells.
3.
a green pigment that traps energy
from the sun.
the process in which plants and
some other organisms use the energy in sunlight to make food.
5. A
found in the nucleus of a cell,
a long nucleic acid molecule containing the genetic instructions
for the development and functioning of all living organisms.

Answers

Answer:

1 cell wall

2 yes

3 chloroplast

4 photosynthesis

5 Deoxyribonucleic acid (I believe)

hope this helped a little and pls mark brainiest if it did :)

Explanation:

The cell wall is a rigid layer that is found outside the cell membrane and surrounds the cell, providing structural support and protection.

how many moles of oxygen atoms are present in 0.4 moles of oxygen gas​

Answers

Answer:

Each molecule of O2 is made up of 2 oxygen atoms. So 1 mole of O2 molecules is made up of 2 moles of oxygen atoms. Therefore 1 mole of oxygen gas contains 2 moles of oxygen atoms. And 0.4 moles of oxygen gas contains 0.8 moles of oxygen atoms.

There are 0.8 moles of oxygen atoms in 0.4 moles of oxygen gas.

Oxygen gas (O₂) consists of two oxygen atoms bonded together. Therefore, to determine the number of moles of oxygen atoms present in a given amount of oxygen gas, we can simply multiply the number of moles of oxygen gas by the number of oxygen atoms per molecule, which is 2.

Given that we have 0.4 moles of oxygen gas, we can calculate the number of moles of oxygen atoms as follows:

Number of moles of oxygen atoms = Number of moles of oxygen gas × Number of oxygen atoms per molecule

= 0.4 moles × 2

= 0.8 moles

Therefore, there are 0.8 moles of oxygen atoms present in 0.4 moles of oxygen gas.

This calculation is based on the stoichiometry of oxygen gas, which indicates that each molecule of O₂ contains two oxygen atoms. By considering the mole ratio between oxygen gas and oxygen atoms, we can determine the number of moles of oxygen atoms in a given quantity of oxygen gas.

To learn more about moles, here

https://brainly.com/question/34302357

#SPJ2

Aspirin that has been stored for a long time may give a vinegar like odour and give a purple colour with FeCl3. What reaction would cause this to happen
?.

Answers

Answer:

See explanation

Explanation:

The IUPAC name of aspirin is 2-Acetoxybenzoic acid. It is composed of an acetoxy moiety and a benzoic acid moiety.

The compound can be hydrolysed under prolonged storage conditions to yield acetic acid which causes the vinegar like odour.

Also, one of the products of this hydrolysis bears a phenol group which reacts with FeCl3 to give a purple color.

g An aqueous solution of nitric acid is standardized by titration with a 0.137 M solution of calcium hydroxide. If 19.0 mL of base are required to neutralize 21.8 mL of the acid, what is the molarity of the nitric acid solution

Answers

Answer:

M of HNO₃ is 0.119M

Explanation:

A basic concept of titration is that in equivalence point:

mmoles of acid = mmoles of base

We have data from base and we only have data from volume of acid.

In a case our titration is a strong acid against a strong base.

We apply formula:

M of acid . Vol of acid = M of base . Vol of base

M of acid . 21.8 mL = 0.137M . 19 mL

M of acid = (0.137M . 19 mL) / 21.8 mL

M of acid = 0.119 M

When we neutralize all the titrant we reach the equivalence point.

At this point, pH = 7

2HNO₃  +  Ca(OH)₂ → Ca(NO₃)₂ +  2H₂O

At a constant temperature, a sample of gas occupies 1.5 L at a pressure of 2.8 ATM. What will be the pressure of this sample, in atmospheres, if the new volume is 0.92 L?

Answers

V1=1.5LV2=0.92LP1=2.8atmP2=?

Using boyles law

[tex]\boxed{\sf v\propto \dfrac{1}{p}}[/tex]

[tex]\\ \sf\longmapsto P_1V_1=P_2V_2[/tex]

[tex]\\ \sf\longmapsto P_2=\dfrac{P_1V_1}{V_2}[/tex]

[tex]\\ \sf\longmapsto P_2=\dfrac{2.8\times 1.5}{0.92}[/tex]

[tex]\\ \sf\longmapsto P_2=\dfrac{4.2}{0.92}[/tex]

[tex]\\ \sf\longmapsto P_2=4.56atm[/tex]

[tex]\\ \sf\longmapsto P_2\approx 4.6atm[/tex]

Answer:

[tex]\boxed {\boxed {\sf 4.6 \ atm}}[/tex]

Explanation:

We are asked to find the new pressure given a change in volume. We will use Boyle's Law, which states the volume of a gas is inversely proportional to the pressure. The formula for this law is:

[tex]P_1V_1= P_2V_2[/tex]

Initially, the gas occupies 1.5 liters at a pressure of 2.8 atmospheres.

[tex]1.5 \ L * 2.8 \ atm = P_2V_2[/tex]

The volume is changed to 0.92 liters, but the pressure is unknown.

[tex]1.5 \ L * 2.8 \ atm = P_2* 0.92 \ L[/tex]

We are solving for the final pressure, so we must isolate the variable P₂. It is being multiplied by 0.92 liters. The inverse operation of multiplication is division, so we divide both sides by 0.92 L.

[tex]\frac {1.5 \ L * 2.8 \ atm}{0.92 \ L} = \frac{P_2* 0.92 \ L}{0.92 \ L}[/tex]

[tex]\frac {1.5 \ L * 2.8 \ atm}{0.92 \ L}= P_2[/tex]

The units of liters cancel each other out.

[tex]\frac {1.5 * 2.8 \ atm}{0.92 }=P_2[/tex]

[tex]\frac {4.2}{0.92} \ atm= P_2[/tex]

[tex]4.565217391 \ atm = P_2[/tex]

The original measurements of pressure and volume have 2 significant figures, so our answer must have the same. For the number we calculated, that is the tenths place. The 6 in the hundredth place tells us to round the 5 up to a 6.

[tex]4.6 \ atm \approx P_2[/tex]

The pressure is approximately 4.6 atmospheres.

what is valency of an atom?​

Answers

The number of replaceable electrons in an atom is called its valency.

Examples

Monovalent - HydrogenDivalent - Oxygen

Valency = 8 - Number of electron in last shell [When number of electrons in last shell > 4]

Valency = Number of electron in last shell [When number of electrons in last shell < 4]

Thanks !

☺️☺️☺️☺️☺️☺️☺️

Answer:

the combining capacity if an atom is know as valency.

the property of an element that determines the number of other atimd with an aton if the element can combine.

calcium is added to water,the liberated gas is

Answers

Answer:

In both cases, the gas evolved is H2. When calcium reacts with water the heat evolved is not suffcient for hydrogen to catch fire. On the other hand, sodium metal reacts with water violently and in this case a lot of heat is evolved which is sufficient for hydrogen to catch fire.

Explanation:

may this answer is helpful for you

Hydrogen

The reaction is given by

[tex]\boxed{\sf {Ca\atop Calcium}+{H_2O\atop Water}\longrightarrow {Ca(OH)_2\atop Calcium\:Hydroxide}+{H_2\atop Hydrogen}}[/tex]

Balanced equation:-

[tex]\boxed{\sf {Ca\atop Calcium}+{2H_2O\atop Water}\longrightarrow {Ca(OH)_2\atop Calcium\:Hydroxide}+{H_2\atop Hydrogen}}[/tex]

how many mols of nh4cl are present in 279.0ml of a 0.975 M nh4cl soution?

Answers

Answer:

how many mols of nh4cl are present in 279.0ml of a 0.975 M nh4cl soution?

PLEASE HELP ASAP
A total of 132.33g C3H8 is burned in 384.00 g O2. Use the following questions to determine the amounts of products formed.
• How many grams of CO2 and H2O will be produced? (2 points)
















b. If the furnace is not properly adjusted, the products of combustion can include other gases, such as CO and unburned hydrocarbons. If only 269.34 g of CO2 were formed in the above reaction, what would the percent yield be? (2 points)

Answers

A combustion reaction takes place in the presence of O2 (g). The
products of a complete combustion reaction are CO2 (g) and H2O
(g).

Please guys please answer this

Answers

Answer:

1. Because the rules will keep you safe it prevents you from getting hurt.

2.i) don't taste chemical

ii) Always wear protective gears

iii) be careful with tool

iv) wear protective gloves

Explanation:

help everyone get out quickly

The decrease in the water table due to overuse of water.

Answers

Answer:  Groundwater and surface water are connected. When groundwater is overused, the lakes, streams, and rivers connected to groundwater can also have their supply diminished. Land subsidence occurs when there is a loss of support below ground. This is most often caused by human activities, mainly from the overuse of groundwater, when the soil collapses, compacts, and drops.

Hope it Helps. :)

Identify the conjugate pairs in the following acid-base reaction

H₂CO₃(aq) + C₅H₅N(aq) HNO₃-(aq) + HC₅H₅N+(aq)

Answers

H2CO3 is an acid because it gave away a proton to become HNO3~.

HNO3~ is a conjugate Base because Acids become conjugate Bases after giving away a proton.

C5H5N is a base because it accepted the proton from H2CO3 to become HC5H5N+.

HC5H5N+ is a conjugate Acid because Bases become Conjugate Acids after accepting a proton.

What information does the first quantum number of an electron give?
A. The sublevel that the electron is in
B. The specific orbital the electron is in
C. The energy level the electron is in
D. The spin that the specific electron has ​

Answers

Answer:

с

Explanation:

the first quantum number of an electron gives the information about the energy level the electron is in

The information first quantum number of an electron give is the energy level the electron is in.

What are quantum numbers?

Quantum numbers is a set of symbols which gives idea about the position  of electron present inside an atom.

First quantum number is denoted by symbol 'n' which gives idea about the number of shell or energy level in which electron is present.The sublevel that the electron is in is the second quantum number denoted by symbol 'l'.The specific orbital in which electron is present is denoted by symbol 'm' and it is the third quantum number.The spin that the specific electron has is the forth quantum number and denoted by symbol 's'.

Hence first quantum number of electron gives ideal about the energy level.

To know more about quantum numbers, visit the below link:
https://brainly.com/question/11575590

Which substance has the highest boiling point?
Select the correct answer below:

A) ethyl ether
B) ethyl alcohol
C) water
D) these all have the same boiling point

Answers

Answer:

D) these all have the same boiling point

Which method of separation would be most appropriate for separating a mixture of water and alcohol?

A. evaporation

B. chromatography

C. distillation

D. filtration

Answers

To separate a mixture of alcohol and water, you can use a process known as fractional distillation. This technique relies on the fact that the compounds in the mixture have different boiling points.

Answer:C. distillation

Explanation:

Compounds having  different boiling points when  mixed can be separated by Fractional distillation.

Now when there is a mixture of  water and alcohol, Upon heat, we would see that the alcohol will boil at a lower temperature than water  for eg, ethanol will boil at 78.5 degrees Celsius, vaporizes and  distills into the fractionating columns leaving the  water which we know boils at 100 degrees  Celsius.

See related link here :https://brainly.com/question/13113349

Determine the effect each given mutation would have on the rate of glycolysis in muscle cells.

a. loss of binding site for fructose 1 ,6-bisphophate in pyruvate kinase.
b. loss of allosteric binding site for ATP in pyruvate kinase.
c. loss of allosteric binding site for AMP in phosphofructokinase.
d. loss of regulatory binding site for ATP in phosphofructokinase.

1. Increase
2. decrease
3. No effect

Answers

Answer:

a. Decrease

b. Increase

c. Increase

d. No effect

Explanation:

Glycolysis is present in muscle cells which converts glucose to pyruvate, water and NADH. It produces two molecules of ATP. Cellular respiration produces more molecules of ATP from pyruvate in mitochondria. Glycolysis increases in pyruvate kinase.

a. Loss of binding site for fructose 1,6-bisphosphate in pyruvate kinase: Decrease

b. Loss of allosteric binding site for ATP in pyruvate kinase: No effect

c. Loss of allosteric binding site for AMP in phosphofructokinase: Increase

d. Loss of regulatory binding site for ATP in phosphofructokinase: Increase

A. An important substrate in the glycolysis pathway is fructose 1,6-bisphosphate. It stimulates pyruvate kinase, an essential enzyme in glycolysis. The amount of pyruvate kinase that is activated will decrease if the fructose 1,6-bisphosphate binding site in pyruvate kinase is eliminated. As a result the rate of glycolysis in the muscle cells will probably decrease.

B. The allosteric ATP binding site of pyruvate kinase controls how active the enzyme is. However, pyruvate kinase is not significantly regulated by ATP in muscle cells. Therefore, it is unlikely that deletion of the ATP-binding allosteric site in pyruvate kinase would have no effect on the rate of glycolysis in muscle cells.

C. The rate-limiting enzyme in glycolysis, phosphofructokinase, is activated from all forms by AMP. It increases the rate of glycolysis by stimulating the activity of phosphofructokinase. If the allosteric binding site for AMP is eliminated, phosphofructokinase activation will be reduced. As a result, the rate of glycolysis in muscle cells will decrease.

D. Phosphofructokinase is inhibited allosterically by ATP. It regulates the rate of glycolysis by a feedback mechanism. High ATP concentrations cause phosphofructokinase to bind to its regulatory site, limiting its activity and delaying glycolysis. If the regulatory binding site for ATP is eliminated, the inhibitory action of ATP on phosphofructokinase would be lost. As a result, muscle cells will glycolysis at a faster rate.

Learn more about glycolysis, here:

https://brainly.com/question/26990754

#SPJ6

Predict the missing component in the nuclear equation.
238 92U → 234 90Th + X

A. 4 2He
B. 0 -1e
C. 0 0v​

Answers

Answer:

A

Explanation:

helium (alpha particle)

A skydiver slows down from 65 m/s to 5 m/s by opening the parachute. If this
takes 0.75 seconds, what is the skydiver's acceleration?
A. 45 m/s2 up
B. 80 m/s2 up
C. 45 m/s2 down
D. 80 m/s2 down

Answers

Answer:

D. -80m/s^2

Explanation:

V = u + at

5 = 65 + a (0.75)

0.75a = -60

a = -60/0.75

a = -80m/s^2

Therefore, is decelerating at 80m/s^2

Answer:

[tex]\boxed {\boxed {\sf D. \ 80 \ m/s^2 \ down}}[/tex]

Explanation:

We are asked to find the acceleration of a skydiver. Acceleration is the change in velocity over the change in time, so the formula for calculating acceleration is:

[tex]a= \frac{v_f-v_i}{t}[/tex]

The skydiver was initially traveling 65 meters per second, then he slowed down to a final velocity of 5 meters per second. He slowed down in 0.75 seconds.

[tex]\bullet \ v_f = 5 \ m/s \\\bullet \ v_i= 65 \ m/s \\\bullet \ t= 0.75 \ s[/tex]

Substitute the values into the formula.

[tex]a= \frac{ 5 \ m/s - 65 \ m/s}{0.75 \ s}[/tex]

Solve the numerator.

[tex]a= \frac{-60 \ m/s}{0.75 \ s}[/tex]

Divide.

[tex]a= -80 \ m/s^2[/tex]

The acceleration of the skydiver is -80 meters per second squared or 80 meters per second squared down. The skydiver is slowing down or decelerating, so the acceleration is negative or down.

Determine whether each of the examples represents a colligative property or a non-colligative property. boiling point elevation Choose... color Choose... freezing point depression Choose... vapor pressure lowering Choose... density Choose...

Answers

Answer:

boiling point elevation - colligative property

color - non-colligative property

freezing point depression - colligative property

vapor pressure lowering - colligative property

density - non-colligative property

Explanation:

A colligative property is a property that depends on the number of particles present in the system.

Freezing point depression, boiling point elevation and vapour pressure lowering are all colligative properties of solutions.

Colour and density do not depend on the number of particles present hence they are not colligative properties.

The boiling point elevation, freezing point depression, and vapor pressure lowering are colligative properties. And color and density are non-colligative properties.

Explanation:

The colligative properties are the properties depending upon the number of particles of solute not on the nature of the solute.Example of colligative properties:Vapor pressure loweringElevation boiling pointDepression in freezing pointOsmotic pressureThe non-colligative properties are the properties depending upon the nature of solute and solvent.Example of non-colligative properties :ViscositySurface tensionDensitySolubility

So, from this, we can conclude that boiling point elevation, freezing point depression, and vapor pressure lowering are colligative properties. And color and density are non-colligative properties.

Learn more about colligative properties here:

brainly.com/question/10323760?referrer=searchResults

brainly.com/question/4227527?referrer=searchResults

Calculate [H3O+] for pH 1.86. Steps please.

Answers

Answer:

[H₃O⁺] = [H⁺] = 10^-pH = 10⁻¹°⁸⁶ = 0.0138M in [H⁺]  

Explanation:

By definition pH = -log[H⁺] => [H⁺] = 10^-pH = 10⁻¹°⁸⁶ = 0.0138M in [H⁺]

Using your calculator ... I am using a TI-30XA scientific calculator.

=> start by entering the number 1.86 => then press the (+/-) function => this will insert a negative symbol => -1.86,=> next find button with "2nd" printed on face (on some calculators the button is in yellow); press this button to change to 'secondary mode',=> find the symbol (10ˣ) ... the button below this symbol is usually the 'log' button, then press it => the answer of interest will show in the display window. => ...

Depending on the calculator, the answer may show as 0.0138, or  1.38x10⁻², or 1.38E-2 (=1.38 x 10⁻²). It is the user's job to insert dimensional units into answer of interest =>  0.0138M, or  1.38 x 10⁻²M, or 1.38E-2M.

1.38E-2 which is 1.38 x 10⁻².

Determine the value of the equilibrium constant for the following reaction, where the following amounts of each species are present at equilibrium in a 5.00 L container: 1.34 mol HCl, 4.30 mol O2, 30 g H2O, and 2.42 mol Cl2.
4 HCl(g) O2(g) ----> 2 H2O(l) 2 Cl2(g)

Answers

Explanation:

here's the answer to your question about

What volume of carbon dioxide is required for inflating the Ziploc bag prototype ?

Answers

Answer:

The front passenger airbag has a volume of around 140 l and fully inflates in around 35 ms. The process is similar for side airbags (thorax airbags).

A filament for a light bulb needs to conduct electricity. Which of the elements listed below might be useful as a light bulb filament? Explain your thinking.

A. Tungsten, W
B. Sulfur, S
C. Bromine, Br

Answers

Answer:

A. tungsten

Explanation:

Tungsten is a material which high melting point ie. does not melt easily incase of high temperature

Answer:

option(A):Tungsten

Explanation:

tungsten has highest melting point.

Other Questions
Please help im new and i need help!Please help me if you onlw the answers please!! point O is at a distance named K from the line D. What should be the value of K if we want to find three points that their distance from line D is 4cm and from point O is 6cm?1)42)83)24)3and please tell me how to solve this, I'll mark you the brainliest Graph the function need ASAP helpIs it a, b , c or d? Analyze one of three poems - "The Lady of Shalott" by Alfred, Lord Tennyson,Sonnet 50 by William Shakespeare, or "Grievance" by Amy Lowell - and then write anew poem that uses the same meter, rhyme scheme, and form as the one youanalyzed. Your original poem should be at least two stanzas long (about 8 lines), orexactly 14 lines if you're writing a sonnet.Your assignment should include the following elements: An introduction paragraph with a hook and a thesis statement about the theme ofthe poem you've chosen to analyze An analysis paragraph that describes the rhyme scheme and meter of yourchosen poem 8 - 10 annotations that go into detail about the poetic elements in your chosenpoem An original poem that follows the same form (sonnet, ballad, or free verse) as thepoem you've chosen to analyze answer these questions2) Your basic needs are the things you ____ to live a normal life.(a) should have(b) must have(c) need to have(d) ought to have3) The gate was open so we ____ to wait outside.(a) dont have(b) neednt have(c) didnt have (d) hadnt have4) I knew there ____ be a test, so I ____ need to study.(a) wont; dont(b) wouldnt; didnt(c) mightnt; didnt(d) couldnt; didnt5) I studied all night, then ____ out the test was cancelled. I ____ studied at all.(a) found; neednt have(b) have found; neednt have(c) found; oughtnt to have(d) found; mustnt have6) There are ____ artists whose paintings are worth millions.(a) quite few(b) the few(c) quite a few(d) only few What is the midpoint of a line segment connecting the points (4,6) and (8,2) Need answer fast Name two organs that are made up of all four tissues? Which of the following is the correct way to end a business letter? Lopez Company has a single employee, who earns a salary of $60,000 per year. That employee is paid on the 15th and last day of each month. On January 15, based, in part, on the information set forth in the accounting records, the following must be withheld from the employee's pay: FICASocial Security Taxes (at 6.2%), FICAMedicare Taxes (at 1.45%), Employee Federal Income Taxes (in the amount of $400), Employee State Income Taxes (in the amount of $25), and Employee Medical Insurance (in the amount of $100). (The employees paycheck has not yet been prepared.) Entries to prepare the January 15 journal entry for Lopez would include: There are hundreds if not thousands of wineries. Each winery tries to emphasize how their product is superior to others, though they are all close substitutes. Barriers to entry are low in this industry, and profits for new entrants are small. Which industrial model best fits the wine market Write an expression for the baseball teams Purchase. ________=126Fill the blank pls I need it fast Question 7Which of the following is true of skeletal muscle tissue?AEach cell has a single nucleus.BA muscle cell is composed of hundreds of muscle fibers.Askeletal muscle fiber typically contains a sarcolemma, t-tubules, and myofibrils.DSkeletal muscle cells have the same shape as smooth muscle cells. Which audience is "How to Eat an Ice-Cream Cone" most likely written for? Find the length of the missing sides. Round your answers to the nearest tenth. 8 y x 21 Can someone compress this ipv6 address? 558c:0000:0000:d367:7c8e:1216:0000:66be Alejandro wants to adopt a puppy from an animal shelter. At the shelter, he finds eight puppies that he likes: a male and female puppy from each of the four breeds of and Labrador. The puppies are each so cute that Alejandro cannot make up his mind, so he decides to pick the dog randomly. Find the probability that Alejandro chooses a . the core characteristics of appropriate technology Help!!! QUICK! What is the pattern of the exponents on the a terms in Pascal's Triangle? A. The largest exponent value of the a terms is equal to one more than the value of the exponent on the binomial. The exponent values then decrease from left to right. B. The largest exponent value of the a terms is equal to the value of the exponent on the binomial. The exponent values then decrease from left to right. C. The largest exponent value of the a terms is equal to the value of the exponent on the binomial. The exponent values are then equal to 0 throughout the expansion. D.The largest exponent value of the a terms is equal to one more than the value of the exponent on the binomial. The exponent values are then equal to 1 throughout the expansion. PLZZZZZ HELP 15 POINTSWrite a PEEL paragraph: Evaluate the effectiveness of being an upstander when confronted with a bullying situationWrong answers will be deleted