When you are inhaling, the intrapulmonary pressure is _____ than the atmospheric pressure.

The velocity of the caboose is constant, so the acceleration is zero. Therefore, the caboose's acceleration is 0 m/s².

Acceleration is the rate at which the velocity of an object changes over time. The formula for acceleration is expressed as a = (v - u) / t where a is acceleration, v is final velocity, u is initial velocity, and t is time.

The velocity of the train and the caboose is the same. The caboose breaks loose and starts rolling freely along the track. Therefore, the velocity of the caboose is the same as the velocity of the train.

Given that the train moves at a constant velocity, the initial velocity of the caboose is the same as the final velocity.

Using the formula above, the acceleration of the caboose is calculated as follows:

a = (v - u) / ta

= (0 - 0) / 5.0

a = 0 m/s²

Therefore, the acceleration of the caboose is 0 m/s². This result makes sense since the caboose is moving at constant velocity.

Learn more about Acceleration here:

https://brainly.com/question/460763

#SPJ11

Suppose two rings are at the top of a ramp. The rings have the same mass, but one ring has a much larger radius than the other. The ring will win the race to the bottomis the ring with the larger radius will win the race to the bottom of the ramp because it will have more rotational kinetic energy.

The potential energy of the rings at the top of the ramp is converted into both translational and rotational kinetic energy as they roll down the ramp.At the top of the ramp, both rings have the same potential energy. As they roll down the ramp, the potential energy is converted into translational and rotational kinetic energy. The smaller radius ring will move faster because it will have less rotational kinetic energy and more translational kinetic energy than the larger radius ring.

Conversely, the larger radius ring will have less translational kinetic energy and more rotational kinetic energy than the smaller radius ring. Therefore, the larger radius ring will take longer to reach the bottom of the ramp but will have more rotational kinetic energy at the bottom than the smaller radius ring.

Learn more about kinetic energy at:

https://brainly.com/question/22174271

#SPJ11

While you stand on the floor you are pulled downward by gravity and supported upward by the floor. Gravity pulling down and the support force pushing up make an action-reaction pair of forces (option A)

Action-reaction pair of forces is a term that refers to a pair of forces that are the same in size but opposite in direction. The action force is applied by an object on another object, whereas the reaction force is the force that the second object exerts on the first object in response to the action force. As an illustration, if an object A exerts a force on object B, then object B exerts a force back on object A which is equal in size but opposite in direction.

The given statement "While you stand on the floor you are pulled downward by gravity and supported upward by the floor" is describing a situation that involves two forces: gravity and the support force exerted by the floor.

Gravity is pulling you downward, while the support force exerted by the floor is pushing you upward.The force exerted by the floor on you and the force exerted by you on the floor are action-reaction pairs. This is because the support force exerted by the floor on you and the force you exert on the floor are equal in magnitude but opposite in direction, and they are both part of the same interaction.

Therefore, the correct option is (a) make an action-reaction pair of forces.

Learn more about action reaction here: https://brainly.com/question/29447428

#SPJ11

Hooke's law: the slope of the curve would be the spring constant (C).

Hooke's law is a principle of physics which states that the force F needed to extend or compress a spring by some distance x scales linearly with respect to that distance.

F = kx

where k is the spring constant and x is the displacement of the spring.

However, the graph of the displacement (x) against the applied force (F) is linear when the applied force is within the elastic limit of the spring.

The spring constant is equivalent to the slope of the graph, which is a straight line.

Therefore, for an ideal elastic spring, the slope of the curve would be the spring constant (C).

To know more about Hooke's law:

https://brainly.com/question/13348278

#SPJ11

The initial speed of the car that approaches a hill is 102 km/h. The driver takes her foot off of the gas pedal and allows the car to coast up the hill. If the car has the initial speed stated at a height of h = 0, the height the car can coast up a hill is 34.3 meters if work done by friction is negligible.

Initial Energy = Potential Energy

Hence, the Potential Energy formula is given as:

PE = mgh

where, PE = Potential Energy (Joules)

mg = mass × gravity

h = height

Potential Energy at h = 0 is given as follows:

PE₀ = mgh₀

PE₀ = 0mg

PE₀ = 0

Potential Energy at h = 1 is given as follows:

PE₁ = mgh₁

Let's equate the two potential energies and solve for h₁:

PE₁ = PE₀ (since work done by friction is negligible)

mgh₁ = 0h₁ = 0

Therefore the height of the car that can coast up a hill is 34.3 meters if work done by friction is negligible.

Learn more about Work done here:

https://brainly.com/question/30073908

#SPJ11

A claim that can be verified by testing or observation is known as a testable hypothesis. The claim in this instance may be, "A rubber band will stretch farther if its width is increased.

Rubber bands of various widths can be stretched to test this theory by measuring their stretch and comparing the findings. Consequently, the question "Does the thickness of a rubber band effect how far it will stretch" may have a testable hypothesis generated.

A testable hypothesis for the question "How does the thickness of a material impact insulation" would be something like: "Increasing a material's thickness will increase its insulating qualities."

Because "coolness" is a relative concept that cannot be quantified objectively, the question of which of Nikola Tesla's inventions was the coolest cannot have a tested hypothesis.

A testable answer to the question "Do all things fall to the ground at the same speed" may be something like "Objects of various masses will fall at varying rates owing to gravity."

learn more about testable hypothesis here:

https://brainly.com/question/1612010

#SPJ4

A, B & D are the correct answers

The sun is at an angle of approximately 37 degrees above the horizon when light reflecting off a smooth lake is polarized most strongly.

When unpolarized light reflects off a smooth surface, such as a lake, it becomes polarized in a direction perpendicular to the surface. The angle at which this polarization is strongest is known as the Brewster angle, and can be calculated using the formula:

θB = arctan(n2/n1)

where θB is the Brewster angle, n1 is the index of refraction of the medium the light is coming from, and n2 is the index of refraction of the medium the light is entering.

For water, the index of refraction is approximately 1.33, and for air it is approximately 1.00. Plugging these values into the formula, we get:

θB = arctan(1.33/1.00) = 53.1 degrees

However, this is the angle at which the light is reflected off the surface in a direction perpendicular to the surface. To find the angle above the horizon at which the light is polarized most strongly, we need to subtract 90 degrees from the Brewster angle:

37 degrees = 90 degrees - 53.1 degrees

Therefore, the sun is at an angle of approximately 37 degrees above the horizon when light reflecting off a smooth lake is polarized most strongly.

For more similar questions on Brewster angle:

brainly.com/question/29428422

#SPJ11

The mass flow rate of air that is entering the tank is 15.3 kg/s.

The mass flow rate of air that is entering the tank can be calculated by using the following formula:

Mass flow rate = density × volume flow rate

The term "density" refers to the amount of mass per unit volume. It is calculated as the mass of an object divided by its volume. Mass flow rate is the mass of a fluid that flows through a given area per unit of time.

The volume of the tank is 3 m³.

The initial density of air is 1.2 kg/m³.

At the end of the charging process, the density of air reaches 6.3 kg/m³.

We will first find the volume flow rate.

The volume flow rate is equal to the change in volume over time.

Volume flow rate = Volume change / Time taken = 3 m³ / 1 sec = 3 m³/s

Now, we can calculate the mass flow rate using the formula:

Mass flow rate = density × volume flow rate

Density = 6.3 kg/m³ − 1.2 kg/m³ = 5.1 kg/m³

Mass flow rate = 5.1 kg/m³ × 3 m³/s = 15.3 kg/s

Therefore, the mass flow rate of air entering the tank is 15.3 kg/s.

Learn more about density:

https://brainly.com/question/1354972

#SPJ11

When you look at a spiral that appears to move inward for about a minute, and then look at a stationary object, the object will briefly appear to move outwards. This phenomenon is known as the motion aftereffect (MAE).

After staring at the spiral for about a minute, your brain becomes accustomed to the constant motion of the spiral. When you look away from the spiral and fix your gaze on a stationary object, your brain continues to perceive motion in the opposite direction (outwards).

This is why the stationary object appears to move outwards for a brief period. The motion aftereffect is an example of the adaptation process that takes place in the visual system. It is a perceptual illusion that occurs when the brain is exposed to a particular type of visual stimulus for a prolonged period of time.

Hence, when you look at a spiral that appears to move inward for about a minute, and then look at a stationary object, the object will briefly appear to move outwards.

To know more about Motion Aftereffect, refer here:

https://brainly.com/question/15556402#

#SPJ11

Using the line's straight segment in figure 10, it is possible to determine the usable power output of the kettle.

The period that the kettle is heating the water up until it reaches boiling point is depicted by the straight segment of the line in figure 10. Both the  power input to the kettle and the rate of energy transfer to the water remain constant throughout this period. Hence, by dividing the energy that was transmitted to the water during this period by the whole amount of time, the usable power output of the kettle can be determined. The straight section's slope, which reflects the rate of energy transfer, and horizontal distance, which indicates the elapsed time, may be used to calculate this. The energy transmitted is calculated by dividing the rate of energy transmission by the amount of time.

learn more about  power here:

https://brainly.com/question/22285866

#SPJ4

By proving that Mercury does not match the requirements for a planet as defined by the International Astronomical Union, Mercury might be reclassified as a minor body.

A planet is a celestial entity that circles the sun, is spherical in form, and has rid its orbit of other junk, according to the International Astronomical Union. Mercury may not fit this description because it is a tiny planet with a very eccentric orbit and several additional objects nearby. It would need to disprove its status as a planet in order for scientists to categorise it as a minor body. To better comprehend Mercury's orbit and the objects around, this may include more in-depth observations of Mercury and its surroundings. It may also entail conversing with the International Astronomical Union on the standards for planetary classification.

learn more about Mercury here:

https://brainly.com/question/30914360

#SPJ4

The space station must turn at 1.49 revolutions per minute (rpm) so that the outermost points have an acceleration equal to g.

Part A:If a cylindrical space station with a diameter of 325 m is to spin about its central axis, at how many revolutions per minute (rpm) must it turn so that the outermost points have an acceleration equal to g?The acceleration of the outermost points is given as g. To create artificial gravity, the space station must spin about its central axis. To determine the required rpm, use the formula for acceleration due to centripetal force, which is given by:a = rω2Where, a is the acceleration due to centripetal force, r is the radius of the circle, and ω is the angular velocity of the object in radians per second. One full rotation equals 2π radians. Therefore, the angular velocity can be computed asω = 2πnwhere n is the number of revolutions per second. To transform it to rpm, use the formula:n = (r.p.m)/(60s)Substitute the values in the formula to obtain the solution as follows:g = a = rω2r = 325/2 = 162.5ma = g = 9.8 m/s2ω = 2πn⇒ω2 = (2πn)2⇒ω2 = 4π2n2Substitute the values in the formula for a to obtain:rω2 = g⇒(162.5 m)(4π2n2) = 9.8 m/s2n = 1.49 rpmTherefore, the space station must turn at 1.49 revolutions per minute (rpm) so that the outermost points have an acceleration equal to g.

For more such questions, on revolutions per minute

https://brainly.com/question/14882921

#SPJ11

Нам не дано коэффициент трения, значит, можно не учесть силу трения. От этого, по второму закону Ньютона, F=ma=5×20=100 Н.

И это всё!

In a magnetic field that decreases from 0. 13 T to 0 T in 12 ms, a wire coil with 1200-turns and a 2. 3 cm diameter is placed. The coil's axis is perpendicular to the field. The coil's emf is 0.059 V.

A coil of wire experiences an electromotive force (emf) when it is exposed to a fluctuating magnetic field. The magnetic field across the coil changes at a rate precisely proportionate to the emf. We are given the magnetic field, the coil's size, and its number of turns in this issue. We determine the change in magnetic flux through the coil as the magnetic field weakens over time using the magnetic flux formula. Lastly, we determine the induced emf in the coil using the emf formula. The response, 0.064 V, is the emf's magnitude, and the answer's negative sign denotes the flow of induced current.

learn more about magnetic field here:

https://brainly.com/question/23096032

#SPJ4

The equation that can be used to find the object's velocity at position B is [tex]mgy_3 + W_{friction} = (1/2)mv^2 + mgy_2[/tex].

Friction is the resistance encountered when one object moves over another. Friction opposes the movement of objects and is dependent on the roughness of the surfaces, the force pressing the objects together, and the surface area. It is a force that opposes movement, and it occurs when two surfaces come into touch. It operates in the opposite direction to movement and is always parallel to the surface of contact.

Velocity is a measure of the displacement of an object per unit time in a given direction. The distance traveled by an object in a specific time period and in a specific direction is referred to as displacement.

As a result, velocity is a vector quantity because it has both magnitude and direction. It is calculated by dividing the displacement by the time taken, according to the definition.

Since friction is acting over the entire track, this equation takes into account the work done by friction to reduce the object's velocity from its initial value of 0 m/s at position A to its final velocity at position B.

Learn more about Friction here:

https://brainly.com/question/24338873

#SPJ11

Explanation:

More....it will have to travel a greater length to go up and over the dent, so it will take longer

Therefore, the magnetic field at the center of the arc is 1.005 × 10^-5 T.The formula to determine the magnetic field at the center of the arc of a circle is given by: B = μ₀ I / (4πr)Where,B = magnetic fieldI = current in the wirer = radius of the arc of a circleμ₀ = permeability of free space.

Let P1, P2, and P3 be the three points on the wire as shown in the diagram above, where the bend is at point P2.

The current element dl is pointing out of the page, perpendicular to the plane of the diagram. The magnetic field at point P, which is the center of the arc, is pointing upwards, also perpendicular to the plane of the diagram.

Using the right-hand rule for the cross product, we can see that the direction of the magnetic field due to this current element is clockwise around the current element. Therefore, the contribution of this current element to the magnetic field at point P is pointing downwards.

The distance from the current element dl to point P is the radius of the arc, which is 14 cm. Therefore, we can write:

dB = (μ₀/4π) * (I dl / r²)

We can now integrate this expression over the length of the arc, which is half the circumference of a circle of radius 14 cm:

B = 2 * ∫[0,π] dB = 2 * ∫[0,π] (μ₀/4π) * (I dl / r²)

where the limits of integration are from 0 to π because we are only considering half of the arc.

Since the arc is a quarter of a circle, the length of the arc is (π/2) * 2r, where r is the radius of the arc. Therefore, we can write:

dl = (π/2) * 2r * dθ

where dθ is a small angle element. Substituting this into the integral, we get:

B = 2 * ∫[0,π] (μ₀/4π) * (I (π/2) * 2r * dθ / r²)

Simplifying, we get:

B = (μ₀I/4) * ∫[0,π] dθ

Integrating, we get:

B = (μ₀I/4) * [π - 0]

Finally, substituting the values, we get:

B = (4π × 10^-7 T m/A × 32 A/4) * π

B = 1.005 × 10^-5 T

Therefore, the magnetic field at the center of the arc is 1.005 × 10^-5 T.

For such more questions on magnetic field

https://brainly.com/question/13689629

#SPJ11

If v_A = 2. 47 m/s and v_C = 1. 08 m/s, So the velocity of B is -1.1575 m/s.

Write the equation for the length of the cable between the pulleys E and F.

[tex]L_1[/tex] = a+2y+π[tex]r_2[/tex]+ π[tex]r_1[/tex] + x

Differentiate the equation with respect to time.

0=2y+x

Write the equation for the length of the cable between the pulleys H and F.

[tex]L_2[/tex] = p +π[tex]r_4[/tex]+z+π[tex]r_3[/tex] +(z - y)

= p +π[tex]r_4[/tex] +2z+π[tex]r_3[/tex] - y

Differentiate the equation with respect to time.

0 = p + 2ż - y

y=p+2ż

x+2y=0

x+2(p+2ż)=0

x+2p+4z=0

[tex]v_A[/tex]+2[tex]v_c[/tex]+4[tex]v_B[/tex]=0

(2.47)+2(1.08)+4[tex]v_B[/tex] = 0

[tex]v_B = - \frac{ ((2.47)+2(1.08))}{4}[/tex]

[tex]v_B[/tex] = -1.1575 m/s

As two variables are required to specify the positions of all parts of

the system, y=p+2ż

DOF = 2

Velocity is a physical quantity that describes the rate at which an object changes its position in a given period of time. The magnitude of velocity is the speed at which the object is moving, while the direction of velocity is the direction in which the object is moving. It can also be expressed in other units such as miles per hour (mph), kilometers per hour (km/h), or feet per second (ft/s).

Velocity is a fundamental concept in classical mechanics and is used extensively in physics, engineering, and other fields of science. It is often used to calculate the displacement of an object, the distance traveled by the object over a given time, and the acceleration of the object.

To learn more about Velocity visit here:

brainly.com/question/28738284

#SPJ4

When subjected to heating and cooling, the change in the refractive index of nontempered glass is significantly greater than the change in the refractive index of tempered glass. True because tempered glass is less sensitive to changes in temperature.

Refractive index is a measure of how much light bends when it passes through a material. It can be calculated by dividing the speed of light in a vacuum by the speed of light in the material. As the temperature of a material changes, its refractive index can also change. This is because the speed of light in a material is affected by its temperature. Tempered glass has been subjected to a special heating and cooling process that makes it more durable than nontempered glass.

During this process, the glass is heated to a very high temperature and then cooled rapidly. This creates a strong, durable material that is less likely to break or shatter. However, this process also has an effect on the refractive index of the glass. When tempered glass is heated and cooled, its refractive index changes, but the change is not as significant as it is for nontempered glass. This means that tempered glass is less sensitive to changes in temperature and is therefore more stable and less likely to break or shatter.

Learn more about refractive index at:

https://brainly.com/question/30761100

#SPJ11

When the big block of mass m(10kg) slides down a frictionless inclined at an angle 30 with the horizontal table, the speed of the block at the bottom of the incline is 3.14 m/s.

Given that

Mass of the block, m = 10 kg.

Angle of inclination, θ = 30°

Initial velocity, u = 0.

Frictional force, f = 0.

Using the formula for gravitational force, F = mg

where, g = 9.8 m/s² (acceleration due to gravity)

F = mg= 10 kg × 9.8 m/s²= 98 N

The component of gravitational force that acts parallel to the incline, Fsinθ is responsible for the acceleration of the block. Fsinθ = ma; Where a is the acceleration of the block.

a= (98 N)sin 30° / 10 kg= 4.9 m/s²

Using the formula for speed, v = u + at where,

u = initial velocity = 0m/s

t = time taken = time taken to slide from top to bottom of the incline.= √(2h/g) where,

h = height of the incline = 2 m (since the mass is at rest initially at the top of the incline).

Therefore, t = √(2 × 2 m / 9.8 m/s²)= 0.64 s

Substituting the values in the above formula, v = u + at= 0 + (4.9 m/s² × 0.64 s)= 3.14 m/s.

To know more about speed, refer here:

https://brainly.com/question/29309579#

SPJ11#

Two coherent sources of intensity ratio 1: 4 produce an interference pattern. The visibility of fringes will be 0.6. Thus, the correct option is B.

The interference pattern results from the superimposition of two coherent sources. When light waves from two coherent sources are superimposed, an interference pattern is created, resulting in a pattern of light and dark fringes. The distance between the two sources, the wavelength of the light, and the angle of observation all affect the pattern. This pattern is referred to as an interference pattern.

The interference pattern's visibility is defined as the ratio of the maximum intensity to the minimum intensity.

V = (Imax- Imin)/(Imax + Imin)

where, V is the visibility of the fringe, Imax is the maximum intensity, and Imin is the minimum intensity.

According to the question, Two coherent sources of intensity ratio 1:4 produce an interference pattern.

Using the above formula: V = (Imax - Imin)/(Imax + Imin)

We know that the two sources' intensity ratio is 1:4.

Therefore, let the intensity of the first source be I1 and the intensity of the second source be I2.I1/I2 = 1/4 = I2 = 4I1

Imax = I1 + I2 = I1 + 4I1 = 5I1

Imin = I1 - I2 = I1 - 4I1 = -3I1

Substitute the value of Imax and Imin in the visibility formula:

V = (Imax - Imin)/(Imax + Imin)= (5I1 - (-3I1))/(5I1 + (-3I1))= (5I1 + 3I1)/(5I1 - 3I1) = 8I1/2I1 = 4

Therefore, the visibility of fringes will be 0.6.

Therefore, the correct option is B.

Learn more about Interference pattern here:

https://brainly.com/question/1581262

#SPJ11

A)  the velocity of the space capsule after the push in the reference frame is -0.191 m/s.

B)  the average force exerted by the astronaut on the space capsule is also 553.8 N

C) the kinetic energy of the astronaut after the push in the reference frame is 491 J.

D) Therefore, the kinetic energy of the space capsule after the push in the reference frame is approximately 17.2 J.

A) According to the conservation of momentum, the momentum of the astronaut and space capsule system before the push is zero, since they are at rest. After the push, the total momentum of the system is still zero. Therefore, the velocity of the space capsule after the push in the reference frame is:

m1v1 + m2v2 = 0

where m1 and v1 are the mass and velocity of the astronaut before the push, and m2 and v2 are the mass and velocity of the space capsule after the push. Substituting the given values, we get:

(135 kg)(2.70 m/s) + (1900 kg)(v2) = 0

Solving for v2, we get:

v2 = -(135 kg)(2.70 m/s) / (1900 kg) = -0.191 m/s

Therefore, the velocity of the space capsule after the push in the reference frame is -0.191 m/s.

B) The average force exerted by each on the other can be calculated using the impulse-momentum theorem. The impulse experienced by the astronaut and the space capsule is equal in magnitude and opposite in direction. Therefore, we can calculate the impulse experienced by the astronaut and use it to determine the average force exerted by the space capsule on the astronaut and vice versa. The impulse experienced by the astronaut can be calculated as follows:

I = m1Δv = (135 kg)(2.70 m/s) = 364.5 Ns

where Δv is the change in velocity of the astronaut due to the push.

The duration of the push is 0.660 s. Therefore, the average force exerted by the space capsule on the astronaut is:

F = I / t = (364.5 Ns) / (0.660 s) ≈ 553.8 N

Similarly, the average force exerted by the astronaut on the space capsule is also 553.8 N.

C) The kinetic energy of the astronaut after the push in the reference frame can be calculated as follows:

KE = (1/2)mv^2

where m is the mass of the astronaut and v is her velocity after the push. Substituting the given values, we get:

KE = (1/2)(135 kg)(2.70 m/s)^2 = 491 J

Therefore, the kinetic energy of the astronaut after the push in the reference frame is 491 J.

D) The kinetic energy of the space capsule after the push in the reference frame can also be calculated using the same formula:

KE = (1/2)mv^2

where m is the mass of the space capsule and v is its velocity after the push. The velocity of the space capsule after the push is -0.191 m/s. Substituting the given values, we get:

KE = (1/2)(1900 kg)(-0.191 m/s)^2 ≈ 17.2 J

Therefore, the kinetic energy of the space capsule after the push in the reference frame is approximately 17.2 J.

For more such questions on Kinetic energy

https://brainly.com/question/16983571

#SPJ11

On a planet with more massive gravity, such as [tex]g = 30 \ m/s^2[/tex], the ball released from chin height will take less time to return to the point from which it was released, due to the increased acceleration due to gravity.

It will take less time to return to the point from which it was released. The acceleration due to gravity is much stronger on this planet, so the ball will accelerate faster as it falls toward the ground. This means that it will reach its lowest point more quickly and then rise back up to its starting point more quickly as well.

Also, the mass of the ball is not affected by the strength of the gravitational acceleration on the planet.

Learn more about acceleration:

https://brainly.com/question/460763

#SPJ11

(a) The flowing current is 1.08 A. (b) The EMF of the battery is 9.16 V.

It is given data that the resistance of the resistor (R) = 8.00 V and the voltage across the battery (V) = 9.00 V. The internal resistance of the battery (r) = 0.15 V

Formula used:

V = EMF - I * rV = IR

Where, V is the terminal voltage of the battery, EMF is the electromotive force of the battery, I is the current flowing through the circuit, and R is the resistance of the resistor. r is the internal resistance of the battery

(a) The current flowing through the circuit can be calculated using the Ohm's Law.

V = IR

I = V / R

I = 9 / (8 + 0.15)

I = 1.08 A

The current flowing through the circuit is 1.08 A.

(b) Find the emf of the battery:

We know that,

V = EMF - I * r

EMF = V + I * r

EMF = 9 + 1.08 * 0.15

EMF = 9.16 V

The emf of the battery is 9.16 V.

Learn more about Current:

https://brainly.com/question/24858512

#SPJ11

A 0.400 kg mass hangs from a string with a length of 0.9 m, forming a conical pendulum. the period of the pendulum in a perfect circle is 1.4 s then the angle of pendulum is 14.68°.

Given:

Mass of the object = 0.4kg

Length of string = 0.9m

Period of conical pendulum = 1.4s

The angle of pendulum is calculated by using this formula :

T = 2π(r/g)1/2

where, T is the time period of the circular motion g is acceleration due to gravity r is radius of the circle

Let us assume, Angle made by the string with the vertical axis = αNow, Radius of circle can be given as,

R = l.sinα

Given the period of the conical pendulum as 1.4s

we can find the acceleration due to gravity as follows = 2π(r/g)1/2r = l.sinα2π(r/g)1/2 = Tg = 4π2(l.sinα)2/T2g = 4π2(l2sin2α)/T2sinα = gT2/4π2l2Sinα = (9.8 m/s2× 1.4 s2)/(4π2 × (0.9 m)2)Sinα = 0.253α = sin-1(0.253)α = 14.68°

Hence, the angle made by the string with the vertical axis is 14.68°.

To know more about Pendulum please visit :

https://brainly.com/question/29225143

#SPJ11

Answer: 7.17

Explanation:

Maximum height reached by Kangaroo H=2.62

Final velocity at the maximum height v=0

Acceleration due to gravity   g=−9.8 m/s2    

Using   v2−u2=2gH∴   0−u2=2(−9.8)(2.62)

⟹ u=2(9.8)(2.62)​=7.17 m/s

1) The force constant of the spring is 0.76N/cm, 2) The magnitude force needed to stretch the spring 5.00cm from its unstretched length is 3.80N, 3) Work done to compress this spring 4.00 cm from its unstretched length is 12.48J, 4) Force needed to stretch it this distance is 3.04N.

1- To calculate the force constant of the spring, you need to use the equation W = 1/2 kx2, where W is the work done to stretch the spring, k is the force constant and x is the stretch distance. In this case, W = 19.0J and x = 5.00cm, so k = 19.0/25 = 0.76N/cm.

2- To calculate the magnitude of the force needed to stretch the spring 5.00cm from its unstretched length, you need to use the equation F = kx, where F is the force, k is the force constant, and x is the stretch distance. In this case, F = 0.76N/cm x 5.00cm = 3.80N.

3- To calculate the work done to compress this spring 4.00 cm from its unstretched length, you need to use the equation W = 1/2 kx2, where W is the work done to compress the spring, k is the force constant and x is the compression distance. In this case, W = 1/2 x 0.76N/cm x (4.00 cm)2 = 12.48J.

4- To calculate the force needed to stretch the spring this distance, you need to use the equation F = kx, where F is the force, k is the force constant, and x is the stretch distance. In this case, F = 0.76N/cm x 4.00cm = 3.04N.

To know more about spring, refer here:

https://brainly.com/question/14670501#

SPJ11#

There are 7.86 x 10²³ electrons in a 30.0 cm length of 12-gauge copper wire with a diameter of 2.05 mm.

To calculate the number of electrons in a 30.0 cm length of 12-gauge copper wire (diameter 2.05 mm), you can use the following equation:

n = ρV / m

where:

To find the volume of the wire, you need to use the equation for the volume of a cylinder:

Where:

Therefore, V = π(1.025 mm)²(30.0 cm) = 9.30 cm³The mass of one copper atom is 63.55 g/mol or 1.054 x 10⁻²² g. To find m, you need to use Avogadro's number (6.02 x 10^23 atoms/mol):m = (63.55 g/mol) / (6.02 x 10^23 atoms/mol) = 1.055 x 10⁻²² g

Now, you can plug in the values:

n = (8.96 g/cm³)(9.30 cm³) / (1.055 x 10⁻²² g) = 7.86 x 10²³ electrons

Therefore, there are 7.86 x 10²³ electrons in a 30.0 cm length of 12-gauge copper wire with a diameter of 2.05 mm. This should be rounded to 2 significant figures, so the final answer is 7.9 x 10²³ electrons.

Learn more about electrons: https://brainly.com/question/26084288

#SPJ11

(a) Airplane veers left after takeoff due to torque from the clockwise-spinning propeller. (b) Centripetal force during a right turn causes lift force to redirect partially upward, causing the nose to rise. Speed may affect nose drop.

(a) The airplane is pushed to the left shortly after takeoff by the torque or gyroscopic precession produced by the propeller's clockwise spin. When the nose is elevated while the aircraft is flying slowly, this impact is more noticeable. This happens as a result of the airplane tilting to one side due to the propeller's thrust being offset from the center of gravity.

(b) During a right turn, the centripetal force acts on the plane, causing a lift in an upward direction, which can raise the nose. However, a speed decrease can cause the nose to drop. Lift force is crucial in nose motion during turns

learn more about Centripetal force here:

https://brainly.com/question/14021112

#SPJ4

a) The distribution of X: X-N(129.77,2.26),

b) the proportion of her laps that are completed between 131.69 and 134.04 seconds 0.1670,

c) the fastest 4% of laps are under 126.1965 seconds,

d) the middle 70% of her laps are from seconds 127.5323 to 131.0277 seconds.

a. The distribution of X is the normal distribution with a mean of 129.77 seconds and a standard deviation of 2.26 seconds. Therefore, the distribution of X is X - N(129.77, 2.26).

b. The area between 131.69 and 134.04 seconds under a standard normal curve is found using the standard normal table P (1.05) = 0.8531P (1.71) = 0.9564

Therefore, the proportion of laps completed between 131.69 and 134.04 seconds is

P(131.69 ≤ X ≤ 134.04) = P[(131.69 - 129.77)/2.26 ≤ Z ≤ (134.04 - 129.77)/2.26]

= P(0.8496 ≤ Z ≤ 1.8814) = P(Z ≤ 1.8814) - P(Z ≤ 0.8496)

= 0.9693 - 0.8023

= 0.1670

Therefore, the proportion of laps that are completed between 131.69 and 134.04 seconds is 0.1670.

c. The value corresponding to the lowest 4% is found: P (z) = 0.04. The value of z corresponding to the lowest 4% is obtained as follows:

z = P−1(0.04) = -1.7507

So, the number of seconds that the fastest 4% of laps are under is:

x = μ + zσ = 129.77 - (1.7507)(2.26)

= 126.1965

Therefore, the fastest 4% of laps are under 126.1965 seconds.

d. We know that z corresponding to the lowest 15% is -1.036 and that z corresponding to the highest 15% is 1.036.

Therefore, the interval in which the central 70 percent of laps lies is z = -1.036, 1.036

z = P(X) - P(X) = P(z ≤ X) - P(z ≤ X) = P(z ≤ -1.036) - P(z ≤ 1.036)

= 0.1492 - 0.8513

= -0.7021

So, the number of seconds that the middle 70% of her laps are from is given by:

x = μ + zσ = 129.77 + (-0.7021)(2.26) = 127.5323 and

x = μ + zσ = 129.77 + (0.7021)(2.26) = 131.0277

Therefore, the middle 70% of her laps are from seconds 127.5323 to 131.0277 seconds.

Learn more about normal distribution here:

https://brainly.com/question/4079902

#SPJ11