Answer:
The correct answer is - Frequency is the number of wavelengths, which is measured in hertz.
Explanation:
Frequency is the number of waves that go through a fixed point at a particular time. Hertz is the SI unit for frequency which means that one hertz is equal to a unit number of waver passes in a unit time to a fixed point.
As the frequency of a wave increases which means the number of waves increases in the unit time, the shorter the wavelength will be.
a higher frequency wave has more energy than a lower frequency wave with the same amplitude.
7. Cells often store materials like water, salts, proteins and carbohydrates in sac-like structures called A. Chloroplasts. B. Lysosomes. C. Mitochondria. D. Vacuoles.
Answer:
A
Explanation:
the chloroplast holds the water , nutrients
Answer:
[tex]\boxed {\boxed {\sf D. \ Vacuoles}}[/tex]
Explanation:
First, let's examine each answer choice.
A. Chloroplasts
These structures are only found in plant cells. They are the site of photosynthesis: the process that turns water, carbon dioxide, and light energy into glucose and oxygen.B. Lysosomes
These help remove and break down cellular waste. They contain special enzymes that allow them to digest certain molecules, bacteria, and old parts of the cell.C. Mitochondria
These are famously known as the powerhouse of the cell. They create energy from glucose and oxygen in a process called cellular respiration.D. Vacuoles
Vacuoles are sacs that store substances, including water, nutrients, and waste.Since the question asks us to pick the sac-like structures that store materials in cells, choice D: vacuoles is correct.
4. How many molecules are equal to 2.25 moles of sulfur dioxide?
5. How many moles are equal to 2.4 x 1023 particles of sodium chloride?
Answer: 4. We know that one mole of any chemical compound always contains 6.022 x 10^23 molecules. Therefore, we can calculate the number of molecules of 2.25 moles of sulfur dioxide SO2 by multiplying the number of moles by the Avogadro's constant 6.022 x 10^23:
2.25 moles SO2 (6.022x10^23 molecules/1mole) = 1.355 x 10^24 molecules of sulfur dioxide
5. The number of moles of sodium chloride are 0.40 moles
Explanation:
Baby Mice
Seif's pet mouse had babies. Five of the babies were black and two were white. The
father mouse was black. The mother mouse was white. Seif and his friends wondered
why the mice were different colors. These were their ideas
Jerome: Baby mice inherit more traits from their fathers than their mothers
Alexa: The baby mice got half their traits from their father and half from their mother.
Juner Male traies are stronger than female traits.
Seif Rack mke have more traies than white mice.
Fiona: The black baby mice are probably make and the white baby mice are probably
female
India, Paver in die for colo don't matter what whine will
Consider Seif and his friends responses/ideas. Answer the
following questions:
1. Which friend has the correct answer about how traits are inherited in this method of reproduction?
2. Is this type of reproduction asexual or sexual? How do you know? (use details from the texti
Answer:
I would say for #1 Fiona and for #2 sexual
Explanation:
Please give brailiest
Determine the number of moles in 300 g S.
The number of moles present in 300 g of glucose is 1.7 moles or 2 moles approximately.
Explanation:
i did glucose cause i dont know what u meant by the S?
The velocity of an object consists of its speed and..
A. Average speed
B. Distance
C. Displacement
D. Direction
Answer:
direction
Explanation:
The results of photosynthesis as glucose and oxygen
A) Photosynthesis
B)Products
C)Chloroplasts
D)Glucose
Answer:
Products
Explanation:
give a reason why it is not advisable to heat magnesium before heating ammonium nitrate
Answer:
it can result in an increasing risk of the accumulation of decomposition products, self-heating (from the heat released by the slow decomposition reactions)
Magnesium can result in an increased risk of the accumulation of decomposition products, self-heating (from the heat released by the slow decomposition reactions)
What is ammonium nitrate?Ammonium nitrate is used commonly in fertilizers; in pyrotechniques, herbicides, and insecticides; and in the manufacture of nitrous oxide.
When ammonium nitrate is heated, it decomposes exothermically into nitrous oxide and water.
Hence, Magnesium can result in an increased risk of the accumulation of decomposition products, self-heating (from the heat released by the slow decomposition reactions)
Learn more about ammonium nitrate here:
https://brainly.com/question/5148461
#SPJ2
P4O10 + 6H20 → 4H3PO4
If 30 g of H2O reacts with 40g of P4O10, what is the limiting reactant? How much H3PO4 can be formed?
Answer: [tex]P_4O_{10}[/tex] is the limiting reagent
66.6 g of [tex]H_3PO_4[/tex] will be formed.
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex] [tex]\text{Moles of} P_4O_{10}=\frac{40g}{284g/mol}=0.14moles[/tex]
[tex]\text{Moles of} H_2O=\frac{30g}{18g/mol}=1.7moles[/tex]
[tex]P_4O_{10}+6H_2O\rightarrow 4H_3PO_4[/tex]
According to stoichiometry :
1 mole of [tex]P_4O_{10}[/tex] require 6 moles of [tex]H_2O[/tex]
Thus 0.14 moles of [tex]P_4O_{10}[/tex] will require=[tex]\frac{6}{1}\times 0.14=0.84moles[/tex] of [tex]H_2O[/tex]
Thus [tex]P_4O_{10}[/tex] is the limiting reagent as it limits the formation of product and [tex]H_2O[/tex] is the excess reagent.
As 1 mole of [tex]P_4O_{10}[/tex] give = 4 moles of [tex]H_3PO_4[/tex]
Thus 0.17 moles of [tex]P_4O_{10}[/tex] give =[tex]\frac{4}{1}\times 0.17=0.68moles[/tex] of [tex]H_3PO_4[/tex]
Mass of [tex]H_3PO_4=moles\times {\text {Molar mass}}=0.68moles\times 98g/mol=66.6g[/tex]
Thus 66.6 g of [tex]H_3PO_4[/tex] will be formed.
Which of the following formulas represent acids? Select all that apply.
a. NaOH
b. HCI
c. H2SO4
d. Ca(OH)2
e. KOH
f. HNO3
Answer:
B. HCl, C. H2SO4, F. HNO3
Explanation:
Acids have hydrogen (H) at the beginning
bases have OH at the end
HCl, H₂SO₄,HNO₃ are the chemical formulas which represent acids.
What are acids?Acids are defined as substances which on dissociation yield H+ ions , and these substances are sour in taste. Out of the following , given sets of compounds HCl, H₂SO₄ and HNO₃ are acids as they yield H+ ions on dissociation.
According to the number of H+ ions which are generated on dissociation acids are classified as mono-protic , di-protic ,tri-protic and polyprotic acids depending on the number of protons which are liberated on dissociation.
Acids are widely used in industries for production of fertilizers, detergents batteries and dyes.They are used in chemical industries for production of chemical compounds like salts which are produced by neutralization reactions.
Learn more about acids,here:
https://brainly.com/question/13586622
#SPJ2
Heat from the sun is absorbed by the _____?
Answer:
earth
Explanation:
What do plants do that requires Energy?
Answer:
Photosynthesis
Explanation:
Photosynthesis uses energy from light to convert water and carbon dioxide molecules into glucose (sugar molecule) and oxygen. The oxygen is released, or “exhaled”, from leaves while the energy contained within glucose molecules is used throughout the plant for growth, flower formation, and fruit development.
PLEASE I NEED HELP ILL GIVE BRAINLYEST
What percentage increase did CO2 experience from 1800 to 2004 AD?
The percentage of CO2 increased 48 percent. Hope this helped!
Can someone please help me with my chemistry hw
Answer:
a) 18
b)288g
Explanation:
a) 1:4
4.5mol TiCl4 so HCl is 4(4.5mol)
b) mm of HCl is 36
because 1:4 we multiply 2.0 mol by 4
8mol of HCl
we multiply 8mol by 36 (molar mass of HCl) and we get 288g because mol×molar mass= grams
PLEASE HELP!!!
Explain how an electric car might still run on fossil fuels.
Answer:
Explanation:
When you use electricity to charge your car, you can integrate renewable resources like solar into the fueling process. Without solar, your electric vehicle is still effectively running off of fossil fuels – it's just the fossil fuels utilized at the power plant and not within your engine.
Fossil fuels include substances like natural gas, coal, and oil. It is possible for electric cars to run on these fossil fuels. Fossil fuels like coal are burnt up to generate electricity. So when cars run on electricity, they are indirectly tapping into fossil fuels.
As the world continues to seek measures to reduce carbon emissions, electric cars are gradually becoming an option. While it is true that these fossil fuels might not be used directly on electric cars, they still find use indirectly in these cars. When coal is burnt up at the power plant to generate electricity, electric cars tap into fossil fuels indirectly.Learn more here:
https://brainly.com/question/10172005
65 g of NaOH is dissolved to make 500 mL of solution. Find moles of NaPH and Molarity of solution.
Answer:
3.25 M
Explanation:
Number of moles = mass/ molar mass
mass of NaOH = 65 g
Molar mass of NaOH = 40 g/mol
Number of moles of NaOH = 65g/40 g/mol = 1.625 moles
Let us recall that;
n = CV
n = number of moles of solute
C = concentration of solution
V = volume of solution
C = n/V
n = 1.625 moles
V = 500/1000 L = 0.5 L
C = 1.625 moles/0.5
C = 3.25 M
3. Which of the following is the correct mathematical expression to use to
calculate the pH of a 0.10 Maqueous Ba(OH)2 solution at 25°C ?
Answer:
The pH of a 0.10 Maqueous Ba(OH)2 solution at 25°C is 13.30
Explanation:
The balanced equation is Ba(OH)2(s)→Ba2++2OH−
This indicates that the concentration is 0.2 M
We will find H+ ion concentration
As we know that
[H+][OH−]=1.0×10−14M
Given -
[OH−]=2.0×10−1M
Putting value of [OH-] in above equation we get -
[H+]=5.0×10−14M
pH=−log10[H+]
pH=−log10[5.0×10−14] = 13.30.
what are some ways that you can change the physical phase of matter?
How does matter change from one state to another
Answer:
Adding or removing energy can change the physical matter.
Explanation:
Like for example changing temperature
A scientist combines three atoms of chlorine and six atoms of sodium resulting in a chemical reaction. How many atoms of chlorine must be in the product?
I uploaded the answer to a file hosting. Here's link:
bit.[tex]^{}[/tex]ly/3a8Nt8n
Solar power, natural gas, and wood are all nonrenewable energy sources
Both renewable and nonrenewable resources
What is the pH of a solution that contains [OH-]=2.60 x 10-6 M?
Answer:
Explanation:
Find the pH of a 0.0025 M HCl solution. ... The hydronium ion concentration can be found from the pH by the reverse of the mathematical operation
HOW DO THE STATES OF MATTER FIT INTO THE K-M THEORY? PLS NO LINKS
Answer:Matter can exist in one of three main states: solid, liquid, or gas. Solid matter is composed of tightly packed particles. A solid will retain its shape; the particles are not free to move around.
Explanation:
the minister in change of religious and charititable patreonage was known as
Answer:
sadr
Explanation:
Pls give brainlist
Dos objetos presentan fuerzas eléctricas repulsivas entre sí. ¿Cómo pueden ser las cargas eléctricas de estos objetos?
Answer:
Las cargas eléctricas de los objetos son ambas positivas o son ambas negativas.
Explanation:
Si dos objetos presentan fuerzas eléctricas repulsivas entre sí, quiere decir que ambos tienen el mismo tipo de carga.
Las cargas iguales (positivo con positivo, o negativo con negativo) se repelen, mientras que las cargas diferentes (positivo con negativo) se atraen.
Which of the following is a symptom of mycoplasmosis in birds?
A. itchy rash
B. white ulcers
C. cloudy eyes
D. swollen joints
Answer:
Cloudy eyes
Explanation:
The article talks about eye infection
how do particles of salt and dust affect cloud formation?
Answer:
Cloud formation: Insoluble dust particles can form cloud droplets that affect global and regional climate. Scientists have long recognized the importance of soluble particles, such as sea salt and sulfates, in creating the droplets that form clouds and lead to precipitation.
Write Avogadro's number in "longhand", and then in scientific notation.
Answer:
Explanation: the scientific notation used to calculate a mole is 6.022 x 1023.
Avogadro's number in scientific notation is 6.023×10²³ atoms, molecules, moles.
What is Avogadro's number?Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.
It has a SI unit of reciprocal mole whose numeric value is expressed in reciprocal mole which is a dimensionless number and is called as Avogadro's constant.It relates the volume of a substance with it's average volume occupied by one of it's particles .
According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.
Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number.
Learn more about Avogadro's number,here:
https://brainly.com/question/11907018
#SPJ2
Plz someone help, really struggling
How many liters of carbon monoxide are needed to react with 32.65 g oxygen gas to produce carbon dioxide?
Answer:
2.040 mol CO
Explanation:
First, write out your reaction:
CO + O2 --> CO2
Balance the reaction:
2CO + O2 --> 2CO2
Now divide the 32.65 g O2 by the molar mass of O2 (32.00 g/mol) to get moles of O2. Then multiply by the mole ratio of 2 mol CO for every 1 mol O2 to get moles of CO needed to fully react.
32.65 g O2 / 32.00 g/mol = 1.020 mol O2
1.020 mol O2 • 2 mol CO / 1 mol O2 = 2.040 mol CO
Great Sand Dunes National Park in Colorado is famous for its giant sand dunes. Sand dunes are landforms that are found in deserts and on beaches. Visitors to the park can surf down the dunes on sleds or boards.
Which process causes the shape of these giant dunes?
A. deposition
B. erosion
C. weathering
D. waves
bismuth (V) nitrate + strontium hydroxide
Answer: [tex]2Bi(NO_3)_5(aq)+5Sr(OH)_2(aq)\rightarrow 2Bi(OH)_5(s)+5Sr(NO_3)_2(aq)[/tex]
Explanation:
A double displacement reaction is one in which exchange of ions take place. The salts which are soluble in water are designated by symbol (aq) and those which are insoluble in water and remain in solid form are represented by (s) after their chemical formulas.
A double displacement reaction in which one of the product is formed as a solid is called as precipitation reaction.
The balanced chemical equation is:
[tex]2Bi(NO_3)_5(aq)+5Sr(OH)_2(aq)\rightarrow 2Bi(OH)_5(s)+5Sr(NO_3)_2(aq)[/tex]
When we look at heat transfer problems that include phase transitions, there can bemanynec-essary steps. Consider a material of massmthat undergoes two phase transitions: from solid toliquid and then from liquid to gas. It starts at an initial temperature ofT0(well below the meltingtemperature ofTm) and it heated until it is a gas at a temperature ofTf(well above the boilingtemperature ofTv). How many different steps (simple temperature changes or phase transitions)of heat transfer would you need for this problem
Answer:
There would be 3 temperature changes and 2 phase transitions
Explanation:
The temperature of the material would first increase from T0 to Tm (its melting point)- This is one temperature change.
It would the change from solid to liquid at its melting point Tm.- This is one phase transition.
Its temperature would then increase from its melting point Tm to its boiling point Tv -This is another temperature change.
It would then change from liquid to gas at its boiling point Tv - This is another phase transition.
Finally, its temperature would then increase from its boiling point to T(f) - This is the third temperature change.
So, there would be 3 temperature changes and 2 phase transitions
