Es(CO) .
muchas gracias!!
Answer:
[tex]{ \bf{a). \: CO}}[/tex]
Given the reaction:
Sn2+ (aq) + 2Fe3+ (aq) → Sn4+ (aq) + 2Fe2+ (aq)
The oxidizing agent in this reaction is?
A Sn2+
B Fe3+
C Sn4+
D Fe2+
set goals and objectives for a company
Explanation:
Objectives and goals serve as a foundation for successful organizations since they establish the business's objective and aid in the identification of required measures. Goals are broad assertions of what you want to achieve, whereas goals are the precise stages or steps you need to take to get there.
Identify which of the following statements about the isotopes of an element is correct.
A. They have the same electron configuration.
B. They have the same mass number.
C. They have the same numbers of protons and neutrons in the nucleus.
D. They have more protons than neutrons.
Answer:
A
Explanation:
because B is wrong as it doesn't have the same mass number. C is wrong as it has different number of neutrons. D is wrong as it has more neutrons than protons.
What is ozone hole?
What causes an ozone hole?
Answer:
Ozon prevents us from UV rays of the sun. Ozone hole means that UV rays are entering the Earth. This results in cancer.
Explanation:
Chlorofluorocarbons are causing this
Answer:
The term ‘ozone hole’ refers to the depletion of the protective ozone layer in the upper atmosphere (stratosphere) over Earth's polar regions. People, plants, and animals living under the ozone hole are harmed by the solar radiation now reaching the Earth's surface—where it causes health problems, from eye damage to skin cancer.
Ozone depletion occurs when chlorofluorocarbons (CFCs) and halons—gases formerly found in aerosol spray cans and refrigerants—are released into the atmosphere.
A teacher brings in a cup of iced water and asks students to discuss if the system is exothermic or endothermic . Aida states the system is exothermic , while Alexander states the system is endothermic .
Answer:
C
Explanation:
In thermodynamics, a exothermic system looses heat to the surroundings while an endothermic system absorbs heat from the surroundings.
A system is a part the universe marked off by a specified boundary. The contents of the cup constitutes the system in this case.
The region of space outside the system is called the surroundings. Hence everything outside the cup constitutes the surroundings.
Calculate the number of moles of NaOH in an aqueous solution of 36 cm3 of 0.1 mol dm−3.
PLSS EXPLAIN WHAT YOU DO I DONT GET IT
Answer: The number of moles of NaOH is 0.0036 moles
Explanation:
Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Moles of solute}\times 1000}{ \text{Volume of solution (mL)}}[/tex] .....(1)
Given values:
Molarity of NaOH = [tex]0.1mol/dm^3=0.1mol/L[/tex] (Conversion factor: [tex]1L=1dm^3[/tex]
Volume of the solution = [tex]36cm^3=36 mL[/tex] (Conversion factor: [tex]1mL=1cm^3[/tex]
Putting values in equation 1, we get:
[tex]0.1=\frac{\text{Moles of NaOH}\times 1000}{36}\\\\\text{Moles of NaOH}=\frac{0.1\times 36}{1000}=0.0036mol[/tex]
Hence, the number of moles of NaOH is 0.0036 moles
Which fundamental force(s) can act over very long distances?
A. Gravity and electrostatic force
B. Strong nuclear force and weak nuclear force
C. Gravity only
D. Electrostatic force and strong nuclear force
Answer:
C. Gravity only
Explanation:
When a catalyst is added to a chemical reaction it provides a new reaction pathway that results in a different
Answer: That results in a different ALTERNATE pathway which has a LOWER ACTIVATION ENERGY.
Explanation:
There are many factors that affects a chemical reaction, these include'
--> surface area
--> concentration,
--> temperature,
--> pressure and
--> presence of CATALYST.
A CATALYST is defined as the substance that has the ability to alter the rate of a chemical reaction. Many reaction very slowly when left alone, but become faster when other substances are added. Such substances that merely alter the rate of reactions but do not take part in the reactions are called CATALYSTS.
Activation energy is defined as the energy barrier that must be overcome before a reaction takes place. A catalyst is able to increase the rate of a chemical reaction by decreasing the activation energy of the chemical system.
A catalyst provides an ALTERNATE PATHWAY for the reaction that has a LOWER ACTIVATION ENERGY. When activation energy is lower, more reactant particles have enough energy to react, so the reaction occurs faster.
What BEST describes these three molecules?
Standardization of a Borax solution (Na2B4O7). You are given a 1.044 M solution of H2SO4. It takes 2.63 mL of this H2SO4 to reach the end point. Knowing it takes 1 H2SO4 to neutralize 2 Na2B4O7, what was the concentration of this Borax solution?
The question is incomplete, the complete question is:
Standardization of a Borax solution (Na2B4O7). A student titrates a 20.00 mL sample of an aqueous borax solution with 1.044 M H2SO4. It takes 2.63 mL of acid to reach the equivalence point. Knowing it takes 1 H2SO4 to neutralize 2 Na2B4O7, what was the concentration of this Borax solution?
Answer: The concentration of borax solution is 0.069 M.
Explanation:
To calculate the concentration of borax solution, the formula used is:
[tex]n_1C_1V_1=n_2C_2V_2[/tex] ....(1)
where,
[tex]n_1, C_1\text{ and }V_1[/tex] are the n-factor, concentration and volume of sulfuric acid
[tex]n_2,C_2\text{ and }V_2[/tex] are the n-factor, concentration and volume of borax solution.
We are given:
[tex]n_1=1\\C_1=1.044M\\V_1=2.63mL\\n_2=2\\C_2=?M\\V_2=20mL[/tex]
Putting values in equation 1, we get:
[tex]1\times 1.044\times 2.63=2\times C_2\times 20\\\\C_2=\frac{1\times 1.044\times 2.63}{2\times 20}\\\\C_2=0.069M[/tex]
Hence, the concentration of borax solution is 0.069 M.
How would the equilibrium of the reaction below be affected if the temperature decreased?
Answer:
A. More O2, SO2, and SO3 would be produced.
Explanation:
What is the speed of a wave that has a frequency of 220 Hz and a wavelength
of 0.39 m?
A. 0.002 m/s
B. 564 m/s
C. 85.8 m/s
D. 0.01 m/s
Answer:
12d
Explanation:
Can metals have covalent radius and van der Waal's radius instead of metallic radius?
Explanation:
Whether you choose to use van der Waals radii or metallic radii as a measure of the atomic radius, for metals the ionic radius is smaller than either, so the problem doesn't exist to the same extent. It is true that the ionic radius of a metal is less than its atomic radius (however vague you are about defining this).
Whether you choose to use van der Waals radii or metallic radii as a measure of the atomic radius, for metals the ionic radius is smaller than either, so the problem doesn’t exist to the same extent. It is true that the ionic radius of a metal is less than its atomic radius (however vague you are about defining this).
HOPE SO IT HELPS YOU
Soluitions and solubility
Answer:
solutions are homogeneous mixtures of two or more solutes in a solvent
solubility is the ability of a solute to dissolve in a solvent
Explanation:
hope this is helpful
Which method do you think the suspects used to make the coins, additive plating or displacement plating?
Answer:
See explanation
Explanation:
Electroplating is a method used to coat a metal on top of another metal for various purposes.
Additive plating involves the coverage of a metal surface by another metal. To make the coins, the suspects had to coat the required coinage metal on another metal called the base metal so as to produce the coin.
Hence the method used must be additive plating method.
How many grams are in 36.2 moles of Iron (I) fluoride?
Answer:
4084.808 grams (SigFigs: 4085 grams)
Explanation:
The molar mass of Iron fluoride is 112.84 g/mol.
To calculate the mass, multiply the molar mass by the number of moles.
36.2 mol * 112.84 g/mol = 4084.808 g
Convert to Sigfigs (if necessary):
4085 g
Answer:
The person above is correct
Explanation:
sulphur dioxide reacts with oxygen to produce sulphur trioxide, balance the chemical equation using lcm method?
Answer:
2SO2 + O2 → 2SO3
Explanation:
According to this question, sulphur dioxide (SO2) reacts with oxygen to produce sulphur trioxide (SO3). The equation is as follows:
SO2 + O2 → SO3
The above equation is unbalanced because there are unequal number of atoms of each element in the both reactants and products. To balance the equation, we use coefficients to make the number of atoms equal. The balanced equation is as follows:
2SO2 + O2 → 2SO3
- There are 2 moles of S on both sides of the equation.
- There are 4 moles of Oxygen on both sides of the equation.
Some foods undergo sterilization in order to kill bacteria living in and on the
food. What type of radiation is used in sterilization to kill bacteria?
A. Gamma
B. Alpha
C. Beta
D. Fission
Answer:
A: Gamma
Gamma rays have enough energy to kill bacteria
What is the value of the quantum number n for a spin-up electron in a 2p orbital?
A. +2
B. -1/2
C. +1
D. +1/2
Answer:
+1/2
Explanation:
spin up is always +1/2
What exacerbates the heat waves?
Answer:
A heatwave occurs when a system of high atmospheric pressure moves into an area and lasts two or more days.
Explanation:
In such a high-pressure system, air from upper levels of our atmosphere is pulled toward the ground, where it becomes compressed and increases in temperature.
Helppppp plz ASAP DON’T GUESS
Explanation:
A B C D isme koyi ans hain doond lo
What is the function of the rough
ER?
A. build proteins
B. modify and repackage proteins
C. contains enzymes
A. build proteins
Explanation:
The endoplasmic reticulum can either be smooth or rough, and in general its function is to produce proteins for the rest of the cell to function. The rough endoplasmic reticulum has on it ribosomes, which are small, round organelles whose function it is to make those proteins
How many molecules are present in this sample
0.423 mol co
Jason combines the two intermediate steps shown. 2 equations. First: upper N subscript 2 (g) plus upper O subscript 2 (g) right arrow 2 upper N upper O (g). Second: 2 upper N upper O (g) plus upper O subscript 2 (g) right arrow 2 upper N upper O subscript 2 (g). Which best describes what Jason should do with the oxygen molecules?
Answer:
The molecules of oxygen should be placed as reactants in the equation.
Explanation:
1: N₂ + O₂ → 2NO
2: 2NO + O₂ → 2NO₂
complete reaction:
N₂ + 2O₂ → 2NO₂
In both intermediate equations' oxygen is used as reactant because the end product is the product of the combination of nitrogen and oxygen. So in the complete or overall reaction, oxygen should also be placed as reactant.We can not place oxygen at the side of products neither we can cancel it because, products can only be obtained at the end of the reaction but according to the equations' oxygen is not the end product of the reaction. But the addition into the reaction (Eq. 2) to make the new product.
Also, we can not cancel it because to cancel out molecules of oxygen should be present at the both sides with same amount in the stoichiometric equation.
Hence, in a balanced chemical equation, oxygen should be written as a reactant by using the correct number of moles.
tolong saya jawab yahhh
(i) Liang - liang stoma lebih banyak di bahagian bawah daun berbanding di bahagian atas permukaan daun.
(ii) Struktur X berfungsi mangawal pembukaan dan penutupan liang stoma
Complete the following statements to describe solids, liquids, and gases. Select the correct answer fror
A solid
A liquid
A gas
va definite volume and
a definite volume and
a definite volume and
v
a definite shape.
a definite shape.
a definite shape.
Answer:
solid is definite volume and shape
liquid is a definite volume but not a definite shape because it can move around and fit into different shapes, like on different water bottles.
gas is not a definite volume and not a definite shape because gas particles can expand and spread out which affects both volume and shape
heyoo I need help pleaseeeeee
c) Current cannot flow
Reason: Because the switch is not closed.
Answer:
current can't flow
Explanation:
by the way of explanation it is open circuit in which the current flow whereas in closed circuit the current flow.
if you like my answer please mark as brainlist.
it will be too much help for me.
A neutral atom has 37 electrons. How many protons does the
atom have?
a more than 37 protons
bless than 37 protons
C exactly 37 protons
d it is impossible to know without more information
Answer:
It's answer is c) exactly 37 protons
Answer:
C) , Exactly 37 protons.
Explanation:
Remember the electrons have a negative charge, so to make a atom with 37 electrons neutral, you will need the same amount of the opposite type. That means you need 37 protons.
List two possible steps where impurities may be gained, which would appear to be an increase in copper
yield (why you may get more than 100% of the copper back at the end). Be specific about the steps and
how they might add impurities.
Answer:
i) During washing
ii) During Measurement
Explanation:
The two possible steps are :
i) During washing : during the washing method the residue may be not completely dried out and this residue ( water) will add up to the final product ( copper yield ) and this kind of error is called human error.
ii) During measurement : If the weighing instrument is faulty there might be addition in value of the final copper yield which will see the final yield value > 100% . this error occurs when the initial value and final value is been weighed
The frequency of an X ray is 6.5 x 1018 Hz. What is the X ray’s wavelength? .
Answer:
The X ray’s wavelength is 4.61*10⁻¹¹ m
Explanation:
Wavelength is the minimum distance between two successive points on the wave that are in the same state of vibration. It is expressed in units of length (m).
Frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).
The propagation speed is the speed with which the wave propagates in the medium, that is, it is the magnitude that measures the speed at which the wave's disturbance propagates along its displacement. Relate the wavelength (λ) and the frequency (f) inversely proportional using the following equation:
v = f * λ.
In this case:
The frecuency f= 6.5*10¹⁸ Hz The speed v=c= 3*10⁸ [tex]\frac{m}{s}[/tex]Replacing:
3*10⁸ [tex]\frac{m}{s}[/tex]= 6.5*10¹⁸ Hz* λ
Solving:
[tex]wavelength= \frac{3*10^{8} \frac{m}{s} }{6.5*10^{18} Hz}[/tex]
λ= 4.61*10⁻¹¹ m
The X ray’s wavelength is 4.61*10⁻¹¹ m
