Which element increases its oxidation number in this reaction? 3KOH + H3PO4 → K3PO4 + 3H2O

Answers

Answer 1

Answer:

The answer is "no changes in oxidation number "

Explanation:

Given equation:

[tex]3KOH + H_3PO_4 \longrightarrow K_3PO_4 + 3H_2O[/tex]

In the above-given equation, there are no changes in the oxidation number which can be defined as follows but first we defined the oxidation: In the chemical process, it requires the transfer of ions is oxidation. In particular, it means that products that supply electrodes are oxidized. In the given equation, when 3Potassium hydroxide reacts with phosphoric acid it will produce potassium phosphate and 3 moles of water.

 


Related Questions

Why is particle size the main parameter used in selecting a mechanical phase-separation device?

Answers

Answer:

This is because mechanical phase-separation device such as filtration, centrifugation etc operate according to the unique particle size feature in which they are designed to separates.

The process of centrifugation separates particles of size range between 0.1 μm to 5.0 μm efficiently.

The process of filtration however varies as there are different types of pore sizes which covers a wide range of particle sizes.

CH4 + 2O2 → CO2 + 2H2O In the chemical reaction, if 10 moles of H2O are produced, moles of CO2 are also produced

Answers

Answer:

The correct answer is 5 moles of CO2 are produced.

Explanation:

The given reaction:  

CH₄ (g) + 2O₂ (g) ⇔ CO₂ (g) + 2H₂O (g)

The given reaction is an illustration of a combustion reaction. Any reaction in which a substance is burnt in excess of oxygen to generate water and carbon dioxide is termed as a combustion reaction. From the given equation, it is clear that the moles of the formation of the products are in the ratio 1: 2, that is, if 10 moles of H₂O is produced, the production of 5 moles of CO₂ will be produced.  

Let us multiply, the given equation with 5 we get,  

5CH₄ + 10O₂ ⇔ 5CO₂ + 10H₂O

Hence, it is clear that with the formation of 10 moles of H₂O, formation of 5 moles of CO₂ will also take place.  

1. Which material had the highest rate of absorption? What can you conclude about the rate
of absorption in the natural world? How might this influence climate regions?

Answers

it might be porous materials

Answer:

Air had the highest rate of absorption.  Air absorbs most of the suns heat and sun rays and air can move to different areas which are warm and colder.

Explanation:

Calculate the pressure drop over a 100m length due to friction when a slurry made from 1.0-mm silica particles is pumped through a horizontal 6-cm diameter pipeline (smooth pipe) at 2.5 m/s. The slurry contains 25 per cent silica by volume. The density of silica is 2700 kg/m3, rhow = 1000 kg/m3, μw = 0.001 kg/ms. Use a value of 82 for Ω. Drag coefficient for these particles,CD, may be taken as 0.44 .


For the slurry/Pipe system in question 1, estimate the deposition velocity.

Answers

Answer:

The answer is "2.78".

Explanation:

Given values:

CD= 0.44

Formula:

[tex]\bold{f_r= \frac{v^{2}}{ g(s-1)D}}[/tex]

g=9.8

s= 2.7

D= 0.06

[tex]\to f_r=\frac{2.5^2}{9.8(2.7-1)0.06}\\\\[/tex]

        [tex]=\frac{2.5 \times 2.5}{9.8 \times 1.7 \times 0.06 }\\\\=\frac{6.25}{.9996 }\\\\=6.252501[/tex]

[tex]\phi = \frac{82\times v}{ \sqrt{cD} \times f_r^{-1.5}}\\\\[/tex]

   [tex]= \frac{82 \times 0.25 }{ \sqrt{0.44} \times 6.25^{1.5}}\\\\=2.4285\\[/tex]

[tex]\frac{\bigtriangleup P f_1 s_1}{L} = \frac{\bigtriangleup Pf_w}{L}(1+\phi)\\[/tex]

           [tex]=\frac{2fwSwv^2 (1+2.4285)}{D}\\\\[/tex]

[tex]Re= \frac{D \bar v Sw}{M_w}\\[/tex]

     [tex]=\frac{0.06 \times 2.5 \times 1000 }{0.001}\\\\=\frac{150 }{0.001}\\\\= 150 \times 10^{3}\\\\= 1.50 \times 10^{5}\\\\[/tex]

[tex]fw= 0.00389[/tex]

[tex]\to \frac{\bigtriangleup P f_1 s_1}{L}[/tex]

[tex]\to \frac{2 \times 0.00389 \times 1000 \times2.5^2 \times 3.4265}{0.06}\\\\\to 2.78[/tex]

Potatoes are cut into many parts, making sure that each part has at least one eye (bud). Each piece of potato will usually grow into a new potato plant. Will a new potato plant grow, if planted only with the eye? A. Yes, a full new potato plant can grow from it. B. Yes, but the new plant will take a slightly longer time to germinate. C. No, a new potato plant will not grow because the food needed for germination comes from the potato piece. D. No, a new potato plant will not grow because the leaves emerge only from the potato piece.

Answers

Answer:

b

Explanation:

the eye is the most important so it would grow but it will take some time because if we plant it with piece it has some food

Scientific method quick check

Answers

Answer:

Quick you said:

-Purpose/Question

Ask a question.

-Research

Conduct background research. Write down your sources so you can cite your references. In the modern era, a lot of your research may be conducted online. Scroll to the bottom of articles to check the references. Even if you can't access the full text of a published article, you can usually view the abstract to see the summary of other experiments. Interview experts on a topic. The more you know about a subject, the easier it will be to conduct your investigation.

-Hypothesis

Propose a hypothesis. This is a sort of educated guess about what you expect. It is a statement used to predict the outcome of an experiment. Usually, a hypothesis is written in terms of cause and effect. Alternatively, it may describe the relationship between two phenomena. One type of hypothesis is the null hypothesis or the no-difference hypothesis. This is an easy type of hypothesis to test because it assumes changing a variable will have no effect on the outcome. In reality, you probably expect a change but rejecting a hypothesis may be more useful than accepting one.

-Experiment

Design and perform an experiment to test your hypothesis. An experiment has an independent and dependent variable. You change or control the independent variable and record the effect it has on the dependent variable. It's important to change only one variable for an experiment rather than try to combine the effects of variables in an experiment. For example, if you want to test the effects of light intensity and fertilizer concentration on the growth rate of a plant, you're really looking at two separate experiments.

-Data/Analysis

Record observations and analyze the meaning of the data. Often, you'll prepare a table or graph of the data. Don't throw out data points you think are bad or that don't support your predictions. Some of the most incredible discoveries in science were made because the data looked wrong! Once you have the data, you may need to perform a mathematical analysis to support or refute your hypothesis.

-Conclusion

Conclude whether to accept or reject your hypothesis. There is no right or wrong outcome to an experiment, so either result is fine. Accepting a hypothesis does not necessarily mean it's correct! Sometimes repeating an experiment may give a different result. In other cases, a hypothesis may predict an outcome, yet you might draw an incorrect conclusion. Communicate your results. The results may be compiled into a lab report or formally submitted as a paper. Whether you accept or reject the hypothesis, you likely learned something about the subject and may wish to revise the original hypothesis or form a new one for a future experiment.

You are pushing a box with 20 N of force that has
a mass of 10 kg, solve for acceleration

Answers

Answer:

Force=mass ×acceleration.

20=10×acceleration.

20=10a.

a=2m/s^2.

6th edition before we begin, let's first establish an understanding of basic terminology. it may be harder than you think to clearly define what is a chemical versus a chemical reaction. to help us better differentiate between closely related terms, review the words listed here. sort each of the words into the three categories: contains chemicals, chemical reaction, or neither.

Answers

Answer:

Chemicals are substances in any form of matter with a chemical composition and property. Chemical reaction involves the combination of two or more different atoms chemically combined together, which are not easily separated.

Explanation:

CHEMICALS

Vitamin [tex]B_{1}[/tex]proteingraniteoranges

CHEMICAL REACTIONS

neutralisationcombustionbleachingphotosynthesis

NEITHER

sunlightheatrainbow

5 (01.01 LC)
Which of the following would be a warning sign that information about a weight loss medication is not reliable science?

Answers

Answer:

The scientists and all test subjects involved in the investigation work for the company that sells the medication.

Explanation:

The options are as below:

A. The investigation compared a group that took the medication to a control group that did not take the medication.

B. The scientists and all test subjects involved in the investigation work for the company that sells the medication.

C. The weight loss medication worked for 95 out of the 100 test subjects, while only 15 of the 100 control subjects lost weight.

D. The weight loss results were replicated by scientists conducting a study at an independent institution

The correct option would be that the scientists and all test subjects involved in the investigation work for the company that sells the medication.

When selecting the test subjects for research, the selection must be as random as possible so as to ensure an unbiased outcome and increase the reliability of the research.

Limiting the test subjects to those that work in the company that sells the medication will generally reduce the reliability of the outcome because of element of bias that can be introduced either knowingly or unknowingly.

The test subjects must have been selected from the general population of target users for the medication and not limited to just the employees of the manufacturing company.

Correct option: B

What is the product of the reaction of pentanoic acid with ethanol in the presence of a strong acid?

Answers

Answer:

ethylpentanoate

Explanation:

Alkanoic acids react with alkanols in the presence of mineral acids to yield an ester and water. This is the organic analogue of the inorganic neutralization reaction. The reaction his commonly called esterification. It is an acid catalysed reaction.

The reaction of pentanoic acid and ethanol in the presence of a string acid is shown below;

CH3CH2CH2CH2COOH(aq) + CH3CH2OH(aq) ----> CH3CH2CH2CH2COOCH2CH3(aq) + H2O(l)

The name of the compound formed is ethylpentanoate.

Chemistry is often called the __________ science because it involves the study of the materials in the universe and the changes these materials undergo

Answers

Answer:

Central

Explanation:

Chemistry is often called the central science because of connects the physical sciences, life sciences and applied sciences.

Chemistry is the study of matter and changes undergone by matter. This makes chemistry to occupy a central place in many scientific disciplines including medicine, engineering, pharmacy, geology etc. Basic knowledge of chemistry is usually required by experts in these disciplines.

Suppose a compound is involved in three different reactions denoted R1, R2, and R3. Tripling the concentration of this reactant in all three reactions causes the rates of reaction to increase by factors of 3, 9, and 1, respectively. What is the order of each reaction with respect to this reactant? 1. R1 = 1; R2 = 2; R3 = 0

Answers

Answer:

The order of reaction is as follows, R1 = 1; R2 = 2; R3 = 0

Explanation:

The rate of a chemical reaction is the number of moles of reactants consumed per unit time or the number of moles of products formed per unit. the rate of a chemical reaction is affected by the concentration of reactants

The relationship between the rate of a chemical reaction and the concentration of its reactants is given by the rate law or equation.

Generally, the rate equation is given as;

Rate = k[A]ᵃ[B]ᵇ..., where k = rate constant which is independent of concentration of the reactants, [A] = concentration of reactant A, a = order of reaction A, [B] = concentration of reaction B, b = order of reaction B.

For the given reactions R1, R2 and R3

For R1; rate = 3, Concentration = 3[A]

3 = k[A]3ˣ

3¹ = k[A]3ˣ

Since rate is proportional to concentration, therefore, the order of reaction, x = 1

For R2; rate = 9, Concentration = 3[A]

9 = k[A]3ˣ

3² = k[A]3ˣ

Since rate is proportional to concentration, therefore, the order of reaction, x = 2

For R1; rate = 1, Concentration = 3[A]

1 = k[A]3ˣ

3⁰ = k[A]3ˣ

Since rate is proportional to concentration, therefore, the order of reaction, x = 0

Therefore, the order of reaction is as follows, R1 = 1; R2 = 2; R3 = 0

What is an empirical formula?​

Answers

Answer:

a formula giving the proportions of the elements present in a compound but not the actual numbers or arrangement of atoms.

Hope this helped!!!

Answer:

Empirical formulas show the simplest whole-number ratio of atoms in a compound

Explanation:

A botanist measures a plant growth at 3cm over a two week period. The information she gathers is called.

Answers

Answer:

The correct answer is quantitative data.

Explanation:

The value of data in the form of numbers of counts where each set of data exhibits a specific numerical value associated with it is termed as quantitative data. This information refers to any quantifiable knowledge, which can be used for statistical analysis and mathematical calculations so that decisions of real-life can be taken based on the mathematical outcomes. The quantitative data is used to find the solutions of the queries like how often, how much, or how many.  

In the given case, a botanist measured the growth of the plant for two weeks, and the outcome came in the form of numerical value. Thus, the knowledge she collected is known as quantitative data.  

H2SO4 is also called
a. king of acid
b. king of chemical
c. blue vitriol
d. Antacid​

Answers

Answer:

[tex]\huge\boxed{King\ of \ Acid}[/tex]

Explanation:

H2SO4 (also called sulfuric acid) is also called King of Acids. It is a highly reactive acid.

Answer:

[tex]\large \boxed{\mathrm{a. \ king \ of \ acid }}[/tex]

Explanation:

[tex]\sf H_2SO_4[/tex] or sulfuric acid is known as the king of acid. It is a very reactive acid and is a strong acid in general.

begging u to answer Which is not an inter molecular force? Select one: a. Inter atomic bonds b. van der waals forces c. hydrogen bonds

Answers

Answer:

a-Interatomic bonds

Explanation:

First of all, it is not a force. Let alone be molecular force.

Which of the following sequences describes how a four-stroke engine cycle
powers the engine?

Answers

Answer: Air and fuel intake, compression and ignition, combustion and expansion, exhaust

Explanation:

Qu
What can you determine about the feasibility of a
reaction if the enthalpy is positive and the entropy is
negative?

1
A. The reaction will usually occur because it is unlikely the
entropy will be greater than the enthalpy.
B. The Gibbs energy will always be positive, and the reaction will
never be feasible.
C. The Gibbs energy will always be negative, and the reaction will
always be feasible.
D. The reaction could be feasible above a certain temperature,
Reset Selection​

Answers

Answer:

B. The Gibbs energy will always be positive, and the reaction will

never be feasible.

Explanation:

The relationship between gibbs fee energy, G, enthalpy, H and Entropy, S is given as;

ΔG = ΔH - TΔS

If enthalpy is positive and entropy is negative, it means that we are going t always have  a positive value for the gibbs free energy.

This means the correct option is option B.

How many significant figures are in 0.08260 L? 4 5 6

Answers

Answer:

5

Explanation:

Count the digits after the first non zero number, any number after that (even zero) counts.

Hope that helped!!! k

Answer:

[tex]\boxed{4}[/tex]

Explanation:

[tex]\sf Leading \ zeros \ are \ not \ significant.[/tex]

[tex]\sf Trailing \ zeros \ are \ significant.[/tex]

[tex]\sf Non\ zeros \ are \ significant.[/tex]

[tex]0.08260 \sf \ has \ 4 \ significant \ figures.[/tex]

why is carbon iv oxide used in fire extinguishers

Answers

Answer:

Carbon dioxide extinguishes work by displacing oxygen, or taking away the oxygen element of the fire triangle. The carbon dioxide is also very cold as it comes out of the extinguisher, so it cools the fuel as well.

-K-12 Scientific Method
3/10
A(n)
simply states what will be observed and always
true, but does not explain why.

Answers

Answer:

The correct answer is - scientific law.

Explanation:

A scientific law is an explanation to a well observed phenomenon of the world which is found true every time tested and universal proven fact, but the reason behind the phenomenon and its existence.

To explain the scientific law there will be various explanation that are called scientific theory, however these theories can not be proved.

Thus, the correct answer is - scientific law.

A student is worried about determining if a chemical is radioactive. Which
section of the SDS would the student refer to?
Product Information
Fire Fighting Methods
Physical and Chemical Properties
Hazards Identification

Answers

Answer:

Hazards Identification

Explanation:

A safety data sheet, SDS, is an informational document provided by the manufacturer or importer of a hazardous chemical detailing the chemical, physical, health, and environmental health hazards associated with the chemical as well as safety precautions in handling the chemical.

Some of the sections in the SDS include:

Product Information: It identifies the chemical as well as its recommended uses. The contact information of the manufacturer is also provided.

Fire fighting methods: It gives measures and guidelines necessary for fighting a fire caused by the chemical.

Physical and chemical properties: states the physical and chemical properties of the chemical substance such as:  appearance, odor, pH, melting/freezing point, boiling point and boiling range, flammability, etc.

Hazards identification: states the hazards of the chemical and the necessary warnings regarding the hazards. Some of the information provided include: hazard classification of the chemical (for example flammable liquid, oxidizing gases,explosives, etc), signal word, hazard statement (for example radioactive), pictograms, precautionary statements, etc.

From the above information provided, the student should refer to the hazards identification section.

What element is depicted by the following electron configuration:


Answers

you can determine this by

adding the numbers of the sub-shells, 2+2+6+2+4=16the number on the last sub-shell, 4 means on the 4th main groupthe 3 before 3p4, tells us on the 3rd period, so the answer is Sulphur.

3.Identifica en tu casa 2 elementos en donde sea evidente la elasticidad y dos elementos en los que se manifieste poco y has una pequeña descripción de estos elementos y lo que le permite o no ser evidentemente elásticos

Answers

Answer:

Objetos elásticos: forma de cama y neumático de ciclo.

Objetos no elásticos: muebles y cuchara

Explicación:

Dos materiales elásticos que están presentes en las casas son forma y neumático de ciclo y dos materiales no elásticos como muebles y cuchara. Los materiales elásticos son aquellos que muestran alguna deformación en su forma al aplicar fuerza y al eliminar la fuerza, recupera su forma original, mientras que los materiales no elásticos son duros y no pueden cambiar su tamaño y forma.

Which are the physical properties of water

Answers

Answer:

Some physical properties of water:

It is odorless.It could appear as a white crystalline solid in solid form, a transparent gas with almost no color but a slight hint of blue in liquid form, or a colorless gas in gas form.It has a melting point of 0°C and a boiling point of 100°C.Its density (at 25°C) is about 0.99701 grams/cm³.It has a viscosity of 0.8903 centi-poise.

Of course, there are many more but these are some common ones.

Which of the following is NOT a product of the electrolysis of NaCl? A. Chlorine gas B. None of these C. Hydrogen gas D. Oxygen gas

Answers

Answer:D. Oxygen gas

Explanation: because the experiment showed

Which of the following is NOT the property of a non-metal? A. Non-rigid structure B. Not ductile C. Low density D. Malleable

Answers

Answer:

The answer is D.

Explanation:

Malleable is the property of metal not non-metal.

Answer:

malleable

Explanation:

because a non metal cannot be harmmed into sheets

Describe the reaction of an acid with an alkali.?

Answers

Your question has been heard loud and clear.

The reaction of an acid with an alkali is neutralization reaction. It is a neutralization reaction because , they both neutralize each other (means it makes them chemically inactive after reacting) and produce a salt , and maybe water too.

An example: hydrochloric acid + sodium hydroxide → sodium chloride + water

Thank you

it will neutralise because if you add both of them together with a matching Ph such as 5 and 9 equally then it will neutralise and have a Ph of 7

could you please make me brainliest

explain how sodium and calcium react with water. explain with equations

Answers

Reaction of sodium with water

Sodium metal reacts rapidly with water to form a colourless solution of sodium hydroxide (NaOH) and hydrogen gas (H2). The resulting solution is basic because of the dissolved hydroxide. The reaction is exothermic. During the reaction, the sodium metal may well become so hot that it catches fire and burns with a characteristic orange colour. The reaction is slower than that of potassium (immediately below sodium in the periodic table), but faster than that of lithium (immediately above sodium in the periodic table).

2Na(s) + 2H2O → 2NaOH(aq) + H2(g)

Compound A, C6H12O2, was found to be optically active, and it was slowly oxidized to an optically active carboxylic acid B, C6H12O3, by Ag(NH3)2. Oxidation of A by anhydrous CrO3 gave an optically inactive compound D that reacted with Zn amalgam/HCl to give 3-methylpentane. With aqueous H2CrO4, compound A was oxidized to an optically inactive dicarboxylic acid C, C6H10O4. Give structures for compounds A, B, and C; do not specify stereochemistry.

Answers

Answer:

kindly check the attach file for the drawing of the chemical structures.

Explanation:

So, we are going to start from the compound D, which is stated in the question to be optically active. Therefore, we will have that:

STEP ONE: THE OXIDATION OF COMPOUND A, C6H12O2 TO GIVE COMPOUND C.

The oxidation of compound A,C6H12O2 gives another chemical compound that is chemical compound C which is a optical inactive di-carboxylic acid. The chemical equation is given below:

C6H12O2 + H2Cr2O4 --------------------------------------------> HOOCCH2CHCH3CH2COOH.

STEP TWO: THE OXIDATION OF COMPOUND A, C6H12O2 TO GIVE COMPOUND B.

The oxidation of compound A,C6H12O2 gives another chemical compound that is chemical compound C which is a optically active acid. The chemical equation is given below:

C6H12O2 + Ag(NH3)2^+ -----------------------------> C6H12O3.

Since the question asked us to give the structures of Compound A,B and C there is no need to to show the chemical reaction for compound D.

Kindly check the picture below for the chemical structures.

Other Questions
Which of the following is the difference between Athenian direct democracy and American representative democracy? A. In a direct democracy, citizens elect others to represent them, and in representative democracy, citizens participate directly. B. In a representative democracy the citizens are not allowed to vote for their representatives, and in a direct democracy citizens are allowed to elect representatives. C. In a direct democracy, citizens participate directly in decision making, and in a representative democracy, citizens elect officials to make decisions on their behalf. D. In a representative democracy the citizens are allowed to vote for their representatives, and in a direct democracy citizens are not allowed to particpate in the government. At a local high school, the student population is growing at 12% a year. If the original population was 242 students, how long will it take the population to reach 300 students? Round to the nearest tenth of a year. Would someone help me rewriting these sentences correctly. Thank you. In order to study the mean blood pressure of people in his town, Richard samples the population by dividing the residents by age and randomly selecting a proportionate number of residents from each age group. Which type of sampling is used? a. Convenience sampling b. Cluster sampling c. Stratified sampling d. Systematic sampling Please Help! Three times the quantity of a number increased by 7 is equal to the same number decreased by 15 Apply the square root property of equality.x + = Use the diagram to complete the statement. Triangle J K L is shown. Angle K J L is a right angle. Angle J K L is 52 degrees and angle K L J is 38 degrees. Given JKL, sin(38) equals cos(38). cos(52). tan(38). tan(52). youwork.Factor each expression. If the expression cannot be factored, writecannot be factored. Use algebra tiles if needed. (Examples 4,5,64. 3x + 65. 2x - 156.12x+30y Find the value of x. Determine whether the word in bold is a plural noun, a possessive noun, or neither of them. Maureens goal is to play drums in Lons band. Question 41 options: a) plural b) possessive c) neither of them List the angles in order from the largest to the smallest for ABC.AB= 14, AC = 15, BC = 16 Mrs. Patterson was told by Chris's previous teacher that he cannot sit still and often disrupts class discussion. As a result, Mrs. Patterson assigned Chris a seat in the back of the room and does not call on him. He becomes disinterested and shouts out during discussion. The result is an example of During the Paleocene-Eocene Thermal Maximum, when global surface temperatures spiked, we observe temperate forests ____________________, insect herbivory of temperature. How much energy is required to accelerate a spaceship with a rest mass of 121 metric tons to a speed of 0.509 c? Is MNO=PQR? If so, name the congruence postulate that applies.Given:ME=PQNO=QRMO=PRA. Congruent - ASAB. Congruent - SSSC. Congruent - SASD. Might not be congruent write a strong cause and effect paragraph If the area of the square is A(s) = s, find the formula for the area as a function of time, and then determine A(s(3)). -What is the product?(-3s +2)(4s-1) Simplify:[tex] \frac{ {a}^{5} {b}^{8} }{ {a}^{4} {b}^{10} } [/tex]HELP! answer if you can ! The period of a pendulum is the time it takes the pendulum to swing back and forth once. If the only dimensional quantities that the period depends on are the acceleration of gravity, g, and the length of the pendulum, , what combination of g and must the period be proportional to? (Acceleration has SI units of m s-2.)