Which kind of bond would occur between sodium (Na, Group IA) and chlorine (Cl, Group VIIA)?

Answer:

62.5 moles of O₂.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

2C₈H₁₈ + 25O₂ —> 16CO₂ + 18H₂O

From the balanced equation above,

2 moles of C₈H₁₈ reacted with 25 moles of O₂.

Finally, we shall determine the number of mole of O₂ needed to react with 5 moles of C₈H₁₈. This can be obtained as shown below:

From the balanced equation above,

2 moles of C₈H₁₈ reacted with 25 moles of O₂.

Therefore, 5 moles of C₈H₁₈ will react with = (5 × 25) / 2 = 62.5 moles of O₂.

Thus, 62.5 moles of O₂ is needed for the reaction.

Answer:

a. 1 x 10^-35

Explanation:

The correct compound given is: [tex]\mathsf{Cu_3(AsO_4)}_2[/tex]

To predict the approximate Ksp value of the given compound, we will need to express the oxidation-reduction half-reaction of the compound and its dissociation, then, we will use the Nernst equation to determine the approximate Ksp value.

To start with the reduction half-reaction:

[tex]\mathsf{Cu_3(AsO_4)_{2}(s) + 6e^- \to 2As O_{4}^{3-}_{(aq)}+3Cu(s) }[/tex]

The oxidation half-reaction is:

[tex]\mathsf{3Cu(s) \to 3CU^{2+}_{(aq)} + 6e^-}[/tex]

The overall cell reaction now is:

[tex]\mathsf{Cu_3(AsO_4)_{2}(s) \to 3Cu^+ (aq) + 2As O_{4}^{3-}_{(aq)} }[/tex]

From the reduction half-reduction, the number of moles of electrons (n) transferred is 6 moles.

By applying the Nernst equation:

[tex]\mathsf{E_{cell} = E^0_{cell} -\dfrac{0.0591V}{n}log [Cu^{2+}]^3[AsO_4^{3-}]^2 }[/tex]

At standard conditions;

The standard cell potential [tex]\mathsf{E^0_{cell} = -0.342 \ V}[/tex]

and [tex]\mathsf{E_{cell} = 0 \ V}[/tex] since it is at equilibrium.

∴

[tex]\mathsf{0 = -0.342 -\dfrac{0.0591V}{6}log [Cu^{2+}]^3[AsO_4^{3-}]^2 } \\ \\ \\ \mathsf{0.342 = -\dfrac{0.0591V}{6}log [Cu^{2+}]^3[AsO_4^{3-}]^2 }[/tex]

[tex]\mathsf{log [Cu^{2+}]^3[AsO_4^{3-}]^2 = \dfrac{-(0.342)*6}{0.0591 }}[/tex]

[tex]\mathsf{log [Cu^{2+}]^3[AsO_4^{3-}]^2 = -34.7}[/tex]

[tex]\mathsf{log [Cu^{2+}]^3[AsO_4^{3-}]^2 \simeq -35}[/tex]

[tex]\mathsf{[Cu^{2+}]^3[AsO_4^{3-}]^2 = 10^{-35}}[/tex]

[tex]\mathbf{K_{sp} = [Cu^{2+}]^3[AsO_4^{3-}]^2 = 1\times 10^{-35}}[/tex]

Answer:

Answer: Atoms of chlorine (CI) and magnesium (Mg)

Answer: Atoms of chlorine (CI) and magnesium (Mg)is your answer

Same molecular structure and same properties.

Molecular structure is three dimensional structure in which arrangement of atoms is placed.

The molecular structure of a compound determines the polarity and its reactivity.

The different states of matter solid, liquid and gas have different molecular structure and different properties from each other.

The molecular structure of a molecule will have same properties as of the entire molecule based on its state.

Learn more at https://brainly.com/question/24325752

Answer:

the location of atoms, groups, or ions relative to one another and the number, type, and location of covalent bonds

Answer: Newton's Third Law of Motion.

Explanation:

Newton's Third Law of Motion simply states that every action force creates a reaction force and then, this reaction force will be equal in strength and opposite in direction.

The statement simply implies that in every interaction, there will be a pair of forces that is acting on the two interacting objects. An example of Newton's third law of motion can be seen when a person jumps, thenlegs of the person will apply a force to the ground which will then propel the person into the air.

Answer:

I could be wrong letter c

Explanation:

Your search - What is the answer to 9.7300x10^2+9.8700x 10^3 1.0843x 10^ in scientific notation - did not match any documents.

Suggestions:

Make sure that all words are spelled correctly.

Try different keywords.

Try more general keywords.

Try fewer keywords.

Answer: The given amount of [tex]Cd(NO_3)_2.4H_2O[/tex] contains 0.430 moles of Cd, 0.860 moles of N and [tex]2.59\times 10^{23}[/tex] molecules of water.

Explanation:

The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

Given mass of [tex]Cd(NO_3)_2.4H_2O[/tex] = 132.4 g

Molar mass of [tex]Cd(NO_3)_2.4H_2O[/tex] = 308.5 g/mol

Plugging values in equation 1:

[tex]\text{Moles of }Cd(NO_3)_2.4H_2O=\frac{132.4g}{308.5g/mol}=0.430 mol[/tex]

1 mole of [tex]Cd(NO_3)_2.4H_2O[/tex] contains 1 mole of Cd, 2 moles of nitrogen atom (N), 10 moles of oxygen atom (O) and 8 moles of hydrogen atom (H).

So, 0.430 moles of [tex]Cd(NO_3)_2.4H_2O[/tex] will contain = [tex](1\times 0.430) = 0.430mol[/tex] of Cd and [tex](2\times 0.430)=0.86mol[/tex] of N

According to the mole concept:

1 mole of a compound contains [tex]6.022\times 10^{23}[/tex] number of molecules

So, 0.430 moles of [tex]Cd(NO_3)_2.4H_2O[/tex] will contain = [tex]\frac{6.022\times 10^{23}}{1mol}\times 0.430mol=2.59\times 10^{23}[/tex] number of water molecules.

Hence, the given amount of [tex]Cd(NO_3)_2.4H_2O[/tex] contains 0.430 moles of Cd, 0.860 moles of N and [tex]2.59\times 10^{23}[/tex] molecules of water.

Answer: broooo what is this

Explanation:

Explanation:

it is that when an object is moving 25 m per sec to calculate its time we can simply divide 1.5 by 25 and multiply by 1

Answer:

Create a new account as the thing you're experiencing now is due to the fact that Brainly had blocked your account.

Answer:

the reactants are carbon dioxide ,iron, oxygen

The heat of hydration is defined as the heat absorbed or evolved when one mole of a substance undergoes hydration. The heat of solution is the enthalpy change associated with he dissolution of a solute. The lattice energy is the heat. Lattice energy is the energy released when the components of the lattice are brought together from infinity.

Hence the heat of solution for LiF → Li^+ + F- is -1966  kJ/mol

Given that;

Heat of hydration = ΔH solution – ΔH lattice energy

Where,

ΔH solution  = Heat of the solution

ΔH lattice energy = Lattice energy of the solution

The heat of solution or enthalpy of dissolution is defined as the enthalpy change associated with the dissolution of a solute in a solvent

From the formula above;

ΔH solution = Heat of hydration + ΔH lattice energy

Heat of hydration = [(-431) + (-499)] = -930 kJ/mol

ΔH solution = (-930) + (-1,036) = -1966  kJ/mol

Hence the heat of solution for LiF → Li^+ + F- is -1966  kJ/mol

https://brainly.com/question/13526282

The correct answer is D ... and if the answer was added to the word "explode" .. it would have been more correct .

Answer:

the answer is 47.9 and ik because I just had that question

The empirical formula of the compound is O₄Pb₃.

An Empirical system is the chemical system of a compound that offers the proportions of the elements gifted within the compound however not the real numbers or arrangement of atoms. This would be the lowest complete variety ratio of the elements within the compound.

Amount of lead (Pb) = 90.6%

⇒and amount of oxygen = 9.4%

taking the whole number ratio

o = 4

Pb = 3

∴ ⇒O: Pb=4:3

O4Pb3 answer.

Learn more about empirical formula here:-https://brainly.com/question/1603500

#SPJ2

6.94 is much more closet to 7.016, so Li 7 is more abundant

Answer:

69

Explanation:

I thought that I answer is correct

Answer:

The answer is 69

Explanation:

Because if you add one its 66, and so on, hope this helps! but if you add five it will be 69, if you need help with easy equations let me know

Answer:

See explanation

Explanation:

Tyndall effect refers to the scattering of light in a solution. Tyndall effect occurs when the size of particles in the solution exceeds 1 nm in diameter. Such solutions are actually called false solutions.

In tincture of iodine, the size of particles in solution is less than 1 nm in diameter hence the solution does not exhibit Tyndall effect. Hence, tincture of iodine is a true solution.

Therefore, if the size of particles in solution exceeded 1nm in diameter, Tyndall effect is observed.

Answer:

B.

No products will be formed.

Explanation:

it helps to make juices.

It helps to make concentrated acid into dilute acid.

Answer:

Explanation:

Here are a few more examples:

1. Smoke and fog (Smog)

2. Dirt and water (Mud)

Ca(s)+ H2O (l)----->H2 +Ca(oH)2

Ca(s)+2H2O(l)----->H2(g)+Ca(oH)2

I hope this helps

sorry if it's wrong

Answer:

See explanation

Explanation:

The reaction occurs as follows;

KBr(aq) + AgNO3(aq) ----> AgBr(s) + KNO3(aq)

Number of moles of AgBr formed = mass /molar mass =1.740 g/187.77 g/mol = 0.0093 moles

From the reaction equation;

1 mole of KBr yields 1 mole of AgBr

Hence the number of moles of KBr reacted = 0.0093 moles

Mass of KBr present = 0.0093 moles × 119g/mol = 1.11 g

Mass of KNO3 = 2.850 g - 1.11 g = 1.74 g

Percentage of KBr = 1.11 g/2.850 g × 100 = 38.9%

Percentage of KNO3 = 1.74 g/2.850 g × 100 = 61.1%

Answer:

a) Barney wants to repeat the rutheford experiment

b) the element will be in row 8 column 1 being an alkali metal

c) it should be a radioactive element, with a lot of mass

Explanation:

n this exercise they indicate that the particle Gz has atomic number 119 and atomic mass 305 amu, when reviewing the element periodicity table with this atomic number it has not yet been discovered, it should be in row 8 column 1 therefore it should be an alkali metal .

Therefore, it has only one electron in its last orbit.

a) Barney wants to repeat the rutheford experiment

b) the element will be in row 8 column 1 being an alkali metal

c) it should be a radioactive element, with a lot of mass

Using Gay Lussac's Law

[tex]\boxed{\sf \dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}}[/tex]

[tex]\\ \sf\longmapsto \dfrac{30}{27}=\dfrac{90}{T_1}[/tex]

[tex]\\ \sf\longmapsto T_1=\dfrac{90\times 27}{30}[/tex]

[tex]\\ \sf\longmapsto T_1=81°C[/tex]

Gay Lussac's Law:-

It states that at constant volume (V),The pressure(P) of fixed amount of gas caries directly with its absolute temperature(T).

[tex]\\ \sf\longmapsto P\propto T[/tex]

[tex]\\ \sf\longmapsto \dfrac{P}{T}=Constant[/tex]

[tex]\\ \sf\longmapsto \dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}[/tex]

[tex]\\ \sf\longmapsto P_1T_2=P_2T_1[/tex]

The final temperature of the gases with 90 lbs/in² is equal to 627°C assuming the volume is constant.

Gay-Lussac's law can be described as if the volume (V) of the gas remains constant then the pressure (P) is directly proportional to the absolute temperature (T) of the gas.

Gay Lussca's law in mathematical expression can be represented as:

P/T = k

It can be also represented as the pressure (P) being directly proportional to the temperature (T).

P ∝ T                            ( V of gas is constant)

or,    P₁/T₁ = P₂/T₂

Given, the initial temperature of the gas, T₁ = 27°C = 27 + 273 = 300 K

The initial pressure of the gas, P₁ = 30 lbs/in²

The final pressure of the gas,  P₂ = 90 lbs/in²

The final temperature of the gases in a hair spray can be determined as:

[tex]{\displaystyle \frac{P_1}{T_1} =\frac{P_2}{T_2}[/tex]

[tex]{\displaystyle T_2 =\frac{P_2\times T_1}{P_1}[/tex]

[tex]{\displaystyle T_2 =\frac{90\times 300}{30}[/tex]

T₂ = 900 K = 900 - 273

T₂ = 627°C

Learn more about Gay Lussac's law, here:

brainly.com/question/11387781

#SPJ2

Answer:

hhshshhxujejushwhbwhsjs s hs

Answer:

nitrogen is used in the production of  1) fertilisers  2) nitric acid  3) nylon  4) dyes  and  5) explosives

please give me brainliest if you can :))

Force = The external energy that changes or tends to change the state of any body or object is called force.

Speed = The rate of distance is called speed.

Answer:

Force is a push or pull which changes or tend to change the position of a body.

The rate of change its position with time or magnitude is called speed.