Answers
Answer:
considered as element
Helium He
Related Questions
Hehe someone help I have put down heat but I think there is another
Answers
Answer:
chemical potential enery
Mark brainliest
A cylinder fitted with a movable piston and filled with a gas has a volume of 188.5mL at 26.7 °C when the applied pressure is 755.2 torr. The temperature of the oil bath surrounding the cylinder was increased to 165.2 °C, and the load on the piston was changed. Careful measurement now gave a value of 210.5mL for the volume. What was the final pressure in the system, in torr? Select one:
O a. 715.5 tor O b. 576.9 torr Oc. 988 6 torr O d. 1233 torr 462.6 tor
Answers
Answer:
C
Explanation:
To find the new pressure, we will use this formula: P₁V₁/T₁ = P₂V₂/T₂
P₁ = Original pressure (755.2)
V₁ = Original volume (188.5)
T₁ = Original temperature in kelvins (26.7 + 273.15 = 299.85)
P₂ = Final Volume (?)
V₂ = Final volume (210.5)
T₂ = Final temperature in kelvins (165.2 + 273.15 = 438.35)
Here is our equation
(755.2)(188.5)/(299.85) = (210.5)P₂/(438.35)
Hopefully, you have a calculator handy because this equation will end up looking like this:
474.75471 = (0.48021)P₂
Divide both sides by the coefficient
474.75471/0.48021 = (0.48021)P₂/0.48021
P₂ = 988.64
Determine the molecular and empirical formulas of the following:
a. the organic solvent benzene, which has six carbon atoms and six hydrogen atoms.
b. the compound silicon tetrachloride, which has a silicon atom and four chlorine atoms and is used in the manufacture of computer chips.
c. the reactive substance diborane, which has two boron atoms and six hydrogen atoms
d. the sugar called glucose, which has six carbon atoms, twelve hydrogen atoms, and six oxygen atoms.
Answers
Answer:
the answer is b im pretty sure
Explanation:
sorry if im wrong
The empirical formula for benzene is CH. The molecular formula for benzene is C[tex]_6[/tex]H[tex]_6[/tex]. The empirical formula is also known as the simplest basic formula.
What is molecular formula ?A molecular formula is indeed a formula derived with molecules that corresponds to the total number of distinct atoms in the molecule of a chemical. A subscript inside a molecular formula denotes the number for each type of atoms in the substance's molecule.
The empirical formula provides the most basic formula for something like a compound, defined by the ratio between subscripts of the formula's smallest entire number of constituents. It is also known as the simplest basic formula. An empirical formula is the formula of a material given with the least integer subscript. The empirical formula for benzene is CH. The molecular formula for benzene is C[tex]_6[/tex]H[tex]_6[/tex].
Therefore, the molecular formula for benzene is C[tex]_6[/tex]H[tex]_6[/tex].
To learn more about molecular formula, here:
https://brainly.com/question/28647690
#SPJ6
What is the Molality of a solution prepared by dissolving 84.7 g of KMnO4 (potassium permanganate, an oxidizing agent) in 165 g of water?
a) 0.513 m
b) 11.3 m
c) 0.308 m
d) 3.25 m
e) 0.958 m
Answers
which picture shows the particles in a compound?
picture I and II
picture I
picture III and IV
picture II
Answers
hi <3
compound are 2(or more) elements combined together
thus your answer will be picture I
hope this helps <3
13. Find the total number of atoms present in the following molecules.
a. 5 H₂O
b. Zn Cl₂
Answers
Answer:
zxcdfzdg
Explanation:
zszghzd
How do I calculate the volume?
Answers
Answer:
2477.6 cm³
Explanation:
Volume = length x width x height
Label in cm³
Answer
Choice A
Answer
Choice B
Answer
Choice C
Question
A scientist hypothesizes that a new medication can reduce
the chances of catching a cold Which of these would most
likely be the dependent variable in a study involving this
medication?
//
The participants
who do not receive
the medication
Color PURPLE
The number of
participants who
catch a cold
Color YELLOW
The age of the
participants
Color GRAY
Tt remains the
T+ is purposely
It is used for
Answers
Answer:
what is the question????
This picture shows students working in a
chemistry laboratory. What could they do to make
their lab safer?
Label the test tubes and plastic cups.
Move the fire extinguisher closer to their
table.
Wear chemical protective gloves.
Reduce the clutter on the table.
Stand at the table instead of sitting. Tie long hair back.
DONE
Answers
Answer:
yes it is true they apply necessary safety measures
Answer: Label the test tubes, wear chemical protective gloves, tie long hair back
Explanation:
Just got it wrong
If the sum of the last
number and the middle
number of three consecutive
integersis is 71, then the
Least (smallest) number
mumber must be
Answers
Answer:
number must be 0000.999
Solid calcium oxide and gaseous water are produced by the decomposition of solid calcium oxide hydroxide. Write a balanced chemical equation for this reaction.
Answers
[tex]\boxed{\sf {Ca(OH)_2(s)\atop Calcium\:Hydroxide}\longrightarrow {CaO(s)\atop Calcium\;oxide}+{H_2O(g)\atop water}}[/tex]
On reactant side
Hydrogen= 2atomsOxygen=2atomsCalcium=1atomOn product side
Hydrogen=Oxygen=2atomsCalcium=1atom.hence balanced.
Arrange the following aqueous solutions in order of increasing boiling points.
0.050 m Mg(NO 3) 2; 0.100 m ethanol; 0.090 m NaCl
a. Mg(NO3) < NaCl < ethanol
b. ethanol < Mg(NO3)2 < NaCl
c. ethanol < NaCl < Mg(NO3)2
d. NaCl < ethanol < Mg(NO3)2
e. Mg(NO3)2 < ethanol < NaCl
Answers
Answer:
The correct choice is option b. ethanol < Mg(NO3)2 < NaCl
Explanation:
Ethanol = 0.100 m
Mg(NO3)2 = 0.15 m
NaCl = 0.18 m
The molar concentration of NaCl is the highest, which is why its boiling point will be the highest, too.
how many grams are in one mole of CH3CO2H ?
Answers
Answer: 60.2g
Explanation:
One mole acetic acid weighs 60.2g
What is an atomic number
Answers
Answer:
the number of protons is called the atomic number
hope it helps you buddy
Answer: number of protons in an atom
Explanation:
1. Distinguish between a mixture and a pure substance.
Answers
Answer:
1)Mixture is the combination of substance
2)There are two types of mixture such as heterogeneous mixture and homogeneous mixture
3)foreg=Salt solution ,sedimentation
Pure substance
1)Pure substances are also called elements
2)They are made up of small atoms
3)for eg= oxygen,Venadium ,Iron,Oxygen
In which way are the scientific method and the design process the same?
Answers
Answer: A lot of the steps are the same.
Explanation:
Scientific Method
State your question
Do background research
Formulate your hypothesis, identify variables
Design experiment, establish procedure
Test your hypothesis by doing an experiment
Analyze your results and draw conclusions
Communicate results
Steps of The Scientific Method
Engineering Design Process
Define the problem
Do background research
Specify requirements
Create alternative solutions, choose the best one and develop it
Build a prototype
Test and redesign as necessary
Communicate results
Steps of The Engineering Design Process
A student performs an experiment to determine the molar mass of magnesium oxide. The student repeats the experiment five times and collects the following data: 40.220gmol, 40.654gmol, 40.314gmol, 40.165gmol, and 40.554gmol. What is the relative standard deviation (RSD) for this set of data?
Answers
The relative standard deviation for the set of data obtained by the student is 0.470%
The formula for calculating the relative standard deviation is given below as:
Relative standard deviation (RSD) = (S * 100)/x
where S stands for the standard deviation and x is the mean of the data set.
The following are the steps to calculate to determine the relative standard deviation using the given formula:
Step 1: Calculate the mean of the numbers in the data set.
mean, x = sum of numbers / number of numbers
(40.220 + 40.654 + 40.314 + 40.165 + 40.554)/5
mean = 40.381 g/mol
Step 2: Subtract the mean from each number in the data to determine the deviation for each number and then square the deviations.
(40.220 - 40.381)² = 0.0259
(40.654 - 40.381)² = 0.0745
(40.314 - 40.381)² = 0.00449
(40.165 - 40.381)² = 0.0466
(40.554 -40.381)² = 0.0299
Step 3: Sum the squared deviations.
0.0259 + 0.0745 + 0.00449 + 0.0466 + 0.0299 = 0.181
Step 4: Determine the variance by dividing the sum of the squared deviations by the total number of values.
Variance = 0.181/5 = 0.0362
Step 6: Determine the standard deviation of the data by taking square root of the variance.
Standard deviation, S = √0.0362 = 0.190
Step 7: Determine the relative standard deviation by inserting the values in the formula, (RSD) = (S * 100)/x
RSD = (0.190 * 100)/40.381
RSD = 0.470%
Learn more at: https://brainly.com/question/475676
6. How many meters are in 0.00253 kilometers?
Answers
Answer:
2.53 kilometers
