the following circuit connects the output of a comparator (u1a) to an led (d1). which of the following condition is correct? g
The following circuit connects the output of a comparator (U1A) to an LED (D1). The condition is correct.
To determine if the condition is correct, we must examine the circuit and the functionality of the components. U1A is a comparator, meaning it takes two inputs and compares them. If the input voltage of U1A is higher than the reference voltage, U1A's output will be high (1). D1 is an LED, meaning when it is activated it will produce light. In this circuit, D1 is connected to U1A's output. Therefore, if U1A's output is high, the LED will be activated, and if U1A's output is low, the LED will not be activated.
To determine if the condition is correct, we must consider the logic of the circuit. If U1A's input voltage is higher than the reference voltage, U1A's output will be high and the LED will be activated. Therefore, the given condition is correct.
For such more questions on circuit :
brainly.com/question/28655795
#SPJ11
write the pseudocode to represent the logic of a simple input and output program
Mortgage classifications and borrower creditworthiness Suppose Yvette is planning to purchase a home and in her mortgage application, she declares that she plans to put a 45 percent down payment on the home. Additionally, Yvette's debt-to-Income ratio and credit score are 8 percent and 850, respectively. Assuming that Yvette's mortgage application is accepted by the lender, how would her mortgage likely be classified? Federally insured mortgage Fixed-rate mortgage Prime mortgage Subprime mortgage Suppose Musashi, Rina, and Sean are looking to purchase homes in Los Angeles, and they all happen to find exactly the home they are looking for within a mile of one another, each costing $680,000. None of the homeowners have enough cash to purchase their selected home outright, so each of them needs to submit a mortgage application in order for their lender to determine whether or not the borrower will be able to repay the mortgage loan. Suppose Musashi, Rina, and Sean all use Chase Bank as their lender and that they all submit their mortgage applications at the same time. The following table shows: (1) the amount that each borrower suggests they will put as a down payment on their home, (2) each borrowers' debt-to-income ratio, and (3) each borrower's credit score. Using the information in the table, answer the question that follows. Borrower Down Payment Debt-to-Income Ratio Credit Score Musashi $136,000 10% 780 Rina $61,200 29% 450 Sean $61,200 18% 610 Given the information in the table, which of the three borrowers has neither the strongest nor the weakest mortgage application?
Musashi has neither the strongest nor the weakest mortgage application. Based on the information provided, Musashi has the highest credit score (780) and the lowest debt-to-income ratio (10%), but his down payment is the lowest of the three at $136,000.
Rina has the lowest credit score (450), but the highest down payment ($61,200) and the highest debt-to-income ratio (29%). Sean has the second highest credit score (610), the second lowest debt-to-income ratio (18%), and the second highest down payment ($61,200). As a result, none of the three borrowers have the strongest or weakest application; they all have similar qualities.
For more such questions on application
https://brainly.com/question/27847789
#SPJ11
cross validation (CV) is way of
____
42) Identify the correct algorithm to use for finding the insertion position of a new item in the linked list studentList.
a. ListFindInsertionPosition(studentList, dataValue) {
curNodeA = null
curNodeB = studentList⇢head
while (curNodeB == null and dataValue > curNodeB⇢data) {
curNodeA = curNodeB
curNodeB = curNodeB⇢next
}
return curNodeA
}
b. ListFindInsertionPosition(studentList, dataValue) {
curNodeA = null
curNodeB = studentList⇢tail
while (curNodeB != null and dataValue > curNodeB⇢data) {
curNodeA = curNodeB
curNodeB = curNodeA
}
return curNodeA
}
c. ListFindInsertionPosition(studentList, dataValue) {
curNodeB = null
curNodeA = studentList⇢head
while (curNodeB == null and dataValue < curNodeB⇢data) {
curNodeA = curNodeB
curNodeB = curNodeB⇢next
}
return curNodeB
}
d. ListFindInsertionPosition(studentList, dataValue) {
curNodeA = null
curNodeB = studentList⇢head
while (curNodeB != null and dataValue > curNodeB⇢data) {
curNodeA = curNodeB
curNodeB = curNodeB⇢next
}
return curNodeA
}
The best algorithm to use for finding the insertion position of a new item in the linked list studentList.curNodeA = curNodeB is a linear search algorithm. A linear search algorithm is a simple search algorithm that looks for a value within a list by sequentially checking each element of the list until it finds the desired element or reaches the end of the list. In this case, the algorithm would start at the beginning of the studentList.curNodeA, and then check each node until it finds the desired insertion position.
Once the algorithm finds the desired insertion position, it would then insert the new item into the list, either at the beginning, middle, or end. To insert at the beginning, the algorithm would shift all the other elements down and make room for the new item. To insert at the middle, the algorithm would again shift all the other elements down, while making room for the new item. And to insert at the end, the algorithm would simply append the new item onto the end of the list.
To summarize, the best algorithm to use for finding the insertion position of a new item in the linked list studentList.curNodeA = curNodeB is a linear search algorithm. This algorithm can search for the desired insertion position and then insert the new item at the beginning, middle, or end of the list as needed.
for more such questions on algorithm .
https://brainly.com/question/24953880
#SPJ11
What BEST describes the difference between copyrighted graphics and written
works?
Answer:
the main difference between copyrighted graphics and written works is that copyrighted graphics are protected by copyright law, while written works are protected by both copyright and intellectual property law. Copyright law grants exclusive rights to the author of the work (such as the right to reproduce or distribute the work) while intellectual property law protects the expression of ideas.
Assume the user responds with a 4 for the first number and a 6 for the second number.
answerA = input("Enter a number. ")
answerB = input("Enter a second number. ")
numberA = int(answerA)
numberB = int(answerB)
result = numberA - numberB / 2
print ("The result is" , result)
What is the output?
The result is
Answer:
1.0 ----------------------------------------
C. What are the some of the bad habits of using computers?
Answer:
1. Poor Posture: Sitting in the same position for too long can lead to poor posture, which can cause muscle fatigue, back and neck pain, and headaches.
2. Carpal tunnel syndrome: Repetitive motions such as typing on a keyboard can cause carpal tunnel syndrome, a type of nerve damage that can cause pain and numbness in the hands and wrists.
3. Eyestrain: Prolonged use of a computer can cause eyestrain, which can lead to headaches and vision problems.
4. Poor diet: Sitting in front of a computer can lead to snacking, which can lead to a poor diet and health problems.
5. Lack of physical activity: Using a computer all day can lead to lack of physical activity, which can cause health problems such as obesity.
Put the steps in order to produce the output shown below. Assume the indenting will be correct in the program.
JDoe
1. Line 1
print (answer)
2. Line 2
return strFirst[0] + strLast
3. Line 3
def username (strFirst, strLast):
4. Line 4
answer = username ('Joann', 'Doe')
Answer:
1. Line 3
def username (strFirst, strLast):
2. Line 2
return strFirst[0] + strLast
3. Line 1
answer = username ('Joann', 'Do')
4. Line 4
print (answer)
Output: JDo
The structures used to store data
Answer:
you can store data in list , Tuple , map and array
Explanation:
list means in the form:
list = [1,2,3,4,5]
Tuple = (1,2,3,4,5)
map = {1:2, 2:3 , 3:4}
array = [
[1,2,3,4,5]
[6,7,8,9,10]
]
difference
list is used to access the stored data by usinf the index. Tuple consider each elements as a string
map used to store connected data's like age and name of some one and acces it using either of them and areay used to store 2 dimensional data
Check my work Rearrange the following algorithm in the correct order to determine whether a string of n characters is a palindrome. 8 03:44:21 Rank the options below. return answer procedure palindromecheck(a1, a2, ... an: string) if a;an+1-¡then answer := false answer := true for i == 1 to [n/2] while (a;= an +1-and i
The correct order of the algorithm to determine whether a string of n characters is a palindrome is:
Procedure palindrome Check(a1, a2, ... an: string)
begin answer := true; for i := 1 to [n/2] while (a(i) = an + 1 - i) do be
gin answer := false; break; end; end; r e turn answer;
In order to determine whether a string of n characters is a palindrome or not, one of the ways to do it is by using the above-stated algorithm. The algorithm works as follows: Start with defining the procedure as palindrome Check with parameters as a1, a2, ... an as a string.
Then, initialize the answer variable to true. This variable will store the answer of whether the string is a palindrome or not. Next, for the length of the string until half its length, keep checking whether the character from start and end match. If they do not match, assign false to answer and break out of the loop. Then, return the answer value as the final result.
For such more question on palindrome:
https://brainly.com/question/29804965
#SPJ11
14.
(05.03 MC)
Which example of the always secure design principle states that the resiliency of software and devices against attacker attempts depends heavily on the protection of its at risk components? (5 points)
Psychological acceptability
Complete mediation
Separation of privilege
Weakest link
15.
(05.03 LC)
Which principle states that the confidentiality of a system should remain even when availability is interrupted? (5 points)
Failsafe defaults
Complete mediation
Open design
Weakest link
16.
(05.03 LC)
Which principle states that if the design is highly complex, chances are good that security vulnerabilities increase? (5 points)
Open design
Weakest link
Economy of mechanism
Failsafe defaults
17.
(05.03 LC)
Which key soft skill involves evaluating evidence with an open mind? (5 points)
Critical thinking
Communication
Teamwork
Enthusiasm
18.
(05.03 LC)
Darren was assigned a big project planning a new network for his company. The network will connect several computers throughout a building. Which type of hard skill will he need in this situation? (5 points)
Virtual private network
Local area network
Wide area network
Private area network
19.
(05.03 LC)
What is one method attackers might use to smuggle hidden messages within an unsuspecting file? (5 points)
Copyright
Encoding
Network steganography
Digital encryption
20.
(06.01 MC)
Jackson just started working for a large technology company and received a list of rules that must be followed. He must sign an agreement that he will follow these rules before he can start his job. Which term best describes this agreement? (5 points)
Methods
Procedures
Regulations
Recommendations
21.
(06.01 LC)
________ is the government agency responsible for creating and monitoring safe workspaces in the United States. (5 points)
FDA
DOE
OSHA
USDA
22.
(06.02 LC)
Sarah has ambition and drive to create innovative products and set her own working hours. What type of career opportunity should Iris consider? (5 points)
Mentorship
Leadership
Practicum
Entrepreneurship
23.
(06.03 LC)
Peter has some job experience, but he took some time off to travel and visit friends. Which résumé format should he avoid using due to gaps in his employment history? (5 points)
Video
Combination
Chronological
Functional
24.
(06.03 LC)
Which résumé format would be a good fit for individuals with little to no work experience? (5 points)
Chronological
Video
Functional
Combination
25.
(06.03 LC)
Amy abbreviated the date as 10.27.21 in her business letter. After proofreading her letter, she realized the date format was incorrect. What is the correct format for the date? (5 points)
write the extension for the following programs Ms.word, PowerPoint ,excel, image
Answer:
Microsoft word: docx or doc
PowerPoint: pptx
Excel: There's a few for Excel, but I believe the default is xlsx
Image: jpg, jpeg, png
Which of the following is a fast and easy way to gather information about a company? (Choose all that apply.)
a. Conduct port scanning.
b. Perform a zone transfer of the company’s DNS server.
c. View the company’s Web site.
d. Look for company ads in phone directories.
The options that are a fast and easy way to gather information about a company are as follows View the company's website, Look for company ads in phone directories. Therefore the correct option is option C and D.
To acquire information about a company, conducting a zone transfer of the company’s DNS server and port scanning aren't the recommended techniques because they’re intrusive and can lead to security risks.
Both the website and the phone directory are easy to access, safe, and are often trustworthy sources of information. To gather the required information, one can quickly check out the company's website, where it is possible to find the required information that one needs, and also look for company ads in phone directories.
These two methods are fast and easy to access. One can also go through the company profile on various social media platforms for getting insights into the company's culture, employee reviews, and reviews from customers. Therefore the correct option is option C and D.
For such more question on directories:
https://brainly.com/question/29486744
#SPJ11
Which of the following statements about changing requirements in software development, are correct?
The following statement about changing requirements in software development, is correct: Organizations must adapt to rapidly changing market conditions to stay relevant in business. (Option D)
What is software development?Software development refers to the process of designing, creating, testing, and maintaining software applications, frameworks, or other software components used by computers or other devices.
The statement "Changes are acceptable till design but once development starts, any further change should be rejected" is incorrect as changes in software requirements can occur at any stage of the software development life cycle.
However, changes made later in the development cycle can be more expensive and time-consuming to implement, and they can introduce additional risks to the project.
The statement "In traditional way of software development, once the requirements are baseline, further changes can be easily accepted with light process" is also not entirely true. Any changes to baselined requirements should be subject to a formal change control process.
Learn more about software development on:
https://brainly.com/question/3188992
#SPJ1
Full Question:
Although part of your question is missing, you might be referring to this full question:
Which of the following statements about changing requirements in software development, are correct?
In traditional way of software development, once the requirements are base lined, further changes should undergo heavy change control process
Changes are acceptable till design but once development starts, any further change should be rejected
In traditional way of software development, once the requirements are base lined, further changes can be easily accepted with light process.
Organizations must adapt to rapidly changing market conditions to stay relevant in business
fill in the blank. ___ are text-based systems. Users must key in commands to tell the computer what to do. The primary method of inputs is the keyboard. A mouse is not needed.
Computers are text-based systems. Users must key in commands to tell the computer what to do. The primary method of input is the keyboard; a mouse is not needed.
In order to interact with the computer, a user must input commands into the system in order to give the computer instructions. The commands are usually in the form of words, numbers, and symbols. After the user enters the command, the computer will process the command and respond accordingly. The user can then type in more commands and the computer will repeat the process until the user is finished. This method of input allows users to be very precise in their instructions, as each individual command is processed and executed by the computer.
For more such questions on Computers
https://brainly.com/question/28498043
#SPJ11
FILL IN THE BLANK. In the Reno TCP when TCP enters the fast recovery if a new (non-duplicate) ACK arrives, TCP _____.
In the Reno TCP, when TCP enters the fast recovery if a new (non-duplicate) ACK arrives, TCP increments the congestion window by 1 segment instead of 1/2 segment.
The Reno TCP was the first modification of TCP that addressed congestion. It replaces the slow start and congestion avoidance algorithms with a more aggressive algorithm that speeds up the recovery process when packet loss is detected in the network. The Reno TCP is able to detect the loss of a packet by the receipt of three duplicate acknowledgments, as it believes that the sender has transmitted a packet that has been lost. The Reno TCP then changes to fast recovery mode when it detects the third duplicate acknowledgement.
The Reno TCP is an enhancement to the TCP congestion avoidance algorithm that improves its ability to handle congestion in the Internet. It is a variant of TCP that is designed to cope with network congestion by quickly responding to lost packets, rather than relying on the slow, steady approach of TCP's congestion avoidance algorithm. The Reno TCP is able to detect the loss of a packet by the receipt of three duplicate acknowledgments, as it believes that the sender has transmitted a packet that has been lost.
For such more questions on TCP :
brainly.com/question/29848408
#SPJ11
Cora is a network engineer for a large company and has been given instructions on how to configure a private fiber connection between her company's data center and the cloud service provider her company uses. She needs to configure an ASN on one of the core routers in the data center as part of the connection. Which of the following protocols is she most likely being instructed to configure for use with the CSP?
Answer: Cora is most likely being instructed to configure the Border Gateway Protocol (BGP) for use with the cloud service provider (CSP).
Explanation:
Cora is most likely being instructed to configure the Border Gateway Protocol (BGP) for use with the cloud service provider (CSP). BGP is a routing protocol that is commonly used in large networks, including those that connect data centers to cloud service providers. It allows for the exchange of routing information between different networks and helps to ensure that data is routed efficiently and reliably. BGP uses Autonomous System Numbers (ASNs) to identify different networks and to facilitate routing between them, which is why Cora needs to configure an ASN on one of the core routers in the data center.
Beri is analyzing some network traffic statistics and sees a metric that appears to indicate that frames are being corrupted as they're being sent across the network. Which of the following might be the metric that causes her to believe that is the case?
Answer:
The metric that Beri might be looking at is the frame check sequence (FCS) error rate. The FCS error rate measures the number of frames that are received with errors due to corruption or other issues. A high FCS error rate indicates that frames are being corrupted as they are being sent across the network.
how can website be used to increase ingagement in a business
Answer:
Ads
Explanation:
can be used to increase the number of consumer to specific product by showing it to more people Which is advantaging , also The SEO will notify the one who search about the specific thing the user browsed and direct to this websites so it increase it
The management has five functions:a.) Planning ,b.) Organization,c.) Staffing,D.) Directing and e.) Controlling
Discuss each throughly
Answer:
Planning: Planning is the function of management that involves setting objectives and determining a course of action for achieving those objectives. It involves the creation of a plan, which outlines the steps necessary to reach a desired goal. Planning involves analyzing current and potential resources, predicting future needs, and setting priorities for achieving objectives.
Organization: Organization is the function of management that involves arranging people and other resources to work towards a common goal. It involves creating and structuring a hierarchy of authority within the company, assigning tasks and responsibilities, and establishing systems for communication and decision making.
Staffing: Staffing is the function of management that involves recruiting, selecting, training, and developing employees to fill the positions needed to complete the tasks required for achieving an organization’s goals. It involves assessing the skills and qualifications of potential employees, understanding the organization’s current and future needs, and creating a team of individuals with the right skills and experience.
Directing: Directing is the function of management that involves providing guidance and motivation to employees to ensure that tasks are completed on time and with the desired quality. It involves setting expectations, giving instructions and feedback, and providing support and encouragement.
Controlling: Controlling is the function of management that involves monitoring the performance of employees and the organization as a whole to ensure that goals and objectives are being met. It involves evaluating performance, identifying areas for improvement, and taking corrective action when needed.
Given the following statements, what is the value in AL and the status flags values? (Answer 1 for the flag is set, 0 for clear)
mov AL, 7Bh
add AL, 98h
AL =
Sign Flag =
Zero Flag =
Carry Flag =
Overflow Flag =
The given statements are not provided in the question. Hence, it's not possible to determine the value in AL and the status flag values.
However, let's understand what each flag represents:Sign Flag - This flag is set to 1 when the result of an arithmetic operation is negative. If the result is positive or zero, the flag is cleared.Carry Flag - This flag is set to 1 when there is a carry out of the most significant bit (MSB) during an arithmetic operation. If there is no carry out, the flag is cleared.Overflow Flag - This flag is set to 1 when the result of a signed arithmetic operation exceeds the maximum positive or negative value that can be represented. If the result is within the range of representation, the flag is cleared.In conclusion, the value in AL and the status flag values depend on the given statements, which are not provided in the question.for more such question on arithmetic
https://brainly.com/question/28369191
#SPJ11
you write the sql query below. add a from clause that will retrieve the data from the playlist table.
SELECT FROM playlist will return the whole playlist table's columns and rows.
How does SQL retrieve data FROM a table?The SELECT statement in SQL is used to retrieve data from our tables. The output of this command is always a table, which we can use to develop dynamic web pages or desktop apps or to browse with our database client software.
To retrieve data FROM tables, which clause is used?The SELECT phrase designates one or more columns to be retrieved; to specify more than one column, separate column names with a comma. Use the wildcard * to access all columns (an asterisk).
To know more about columns visit:-
https://brainly.com/question/15081354
#SPJ1
Question:
Assuming a database schema with a table called "playlist", write an SQL query that retrieves data from the table. Add a FROM clause to the query.
Given the following values of arr and the mystery method, what will the values of arr be after you execute: mystery()? private int[] arr - (-17, -14, 3, 9, 21, 34); public void mystery() for (int i = 0; i < arr.length / 2; i += 2) arr[i] = arr[i]. 2;
A. {-34, -28, 6, 18, 42, 68}
B. {-17, -14, 3, 18, 21, 34}
C. {-34, -28, 6, 9, 21, 34)
D. {-34, -14, 6, 9, 21, 34}
E. {-34, -14, 6, 9, 42, 34}
The final value of arr will be {-8, -14, 1, 9, 10, 34}, which is closest to option B: {-17, -14, 3, 18, 21, 34}. Therefore, the answer is option B.
The mystery method is dividing the length of the array by 2 and iterating over the array by incrementing i by 2 in each iteration. In each iteration, it's updating the value at index i to be half of its current value.
Starting with the given values of arr: {-17, -14, 3, 9, 21, 34}
In the first iteration, i = 0, and arr[0] will be updated to -8.5, but since it's an integer array, it will be rounded down to -8.
After the first iteration: {-8, -14, 3, 9, 21, 34}
In the second iteration, i = 2, and arr[2] will be updated to 1.5, but since it's an integer array, it will be rounded down to 1.
After the second iteration: {-8, -14, 1, 9, 21, 34}
In the third iteration, i = 4, and arr[4] will be updated to 10.5, but since it's an integer array, it will be rounded down to 10.
After the third iteration: {-8, -14, 1, 9, 10, 34} Option B.
For more such questions on mystery
https://brainly.com/question/30331783
#SPJ11
TRUE/FALSE. The str method is a good example of a polymorphic method that appears throughout Python's system of classes.
Polymorphic method that appears throughout Python's system of classes is a true statement.
The str method is an example of such a method in Python.In Python, a method that can be used with multiple types of objects is known as a polymorphic method. Python's polymorphic nature allows it to perform many operations without needing to be explicitly declared for specific data types. Python supports polymorphism via a broad variety of concepts, such as functions, method overloading, and operator overloading.
Str method example:As mentioned earlier, the str method in Python is a good example of a polymorphic method that appears throughout Python's system of classes. The str method is used to convert an object into a string. The str method is known as an instance method since it is called on an instance of a class.Str method definition:This method returns a string representation of the object. If no argument is given, it returns a string representation of the empty object.
For such more questions on str method:
brainly.com/question/29602416
#SPJ11
you have a windows workstation connected to a small network. match the utilities on the right with the functions they perform on the left.
System File Checker (SFC) – This utility can scan your system files and restore corrupted or missing system files.
Defrag – This utility is used to optimize and defragment your the hard drive, which can improve its performance. Disk Cleanup – This utility can be used to clean up the temporary files and all other unnecessary files, freeing up the disk space.
Registry Editor – This utility can be used to edit the Windows registry, which contains settings for Windows and all installed programs. Device Manager – This utility is used to the view and manage the hardware connected to your system, including the drivers.
For more such questions on System File Checker .
https://brainly.com/question/28111651
#SPJ11
Note- Complete questions isn't available on the search engine.
Which of the below is float? Select 2 options.
2.5
25
3e-2
'2.5'
"25"
Answer:2.5 and '2.5'
Explanation:
A float number is a number that isn't whole, like for example a decimal number, so the only floats I saw were 2.5 and '2.5'
I hope you get a 100%
difference between multimedia and ordinary text
Answer:
Multimedia uses a combination of different forms of media such as text, images, audio, video, and animations to communicate information and engage an audience, while ordinary text only uses written or typed words. Multimedia is often more engaging and immersive, while ordinary text is more straightforward and accessible. The choice between multimedia and ordinary text depends on the context, audience, and purpose of the content.
Explanation:
Multimedia refers to any content that uses a combination of different forms of media such as text, images, audio, video, and animations to convey information or engage an audience. In contrast, ordinary text refers to content that consists of words and sentences that are written or typed.
The key differences between multimedia and ordinary text are:
Types of media used: Multimedia combines different types of media, including text, images, audio, video, and animations. In contrast, ordinary text only uses written or typed words.
Communication of information: Multimedia is often used to communicate complex ideas or information in a more engaging and interactive way. Ordinary text is typically used to convey information in a more straightforward and concise manner.
Engagement: Multimedia content is often more engaging than ordinary text because it appeals to different senses and offers a more immersive experience. It can capture the attention of the audience and hold their interest for longer periods. Ordinary text, on the other hand, may be less engaging and may require more effort on the part of the reader to maintain interest.
Accessibility: Ordinary text is typically easier to access and consume than multimedia content, as it only requires basic reading skills. Multimedia content, on the other hand, may require more advanced technology and skills to access and use.
In summary, multimedia offers a more dynamic and engaging way to communicate information, while ordinary text is a more straightforward and accessible method for conveying information. The choice between multimedia and ordinary text will depend on the context, audience, and purpose of the content.
Which of the following statements about the guarding against overestimating variable consideration under U.S. GAAP and IFRS is true?
Under IFRS, sellers only include an estimate of variable consideration to extent it is "probable" that a significant reversal of revenue recognized to date will not occur.
Under U.S. GAAP, sellers only include an estimate of variable consideration to extent it is "probable" that a significant reversal of revenue recognized to date will not occur.
U.S. GAAP and IFRS convey the same likelihood with regards to the uncertainty associated with the variable consideration.
The statement is true because regarding U.S. GAAP and IFRS when it comes to guarding against overestimating variable consideration is that "Under IFRS, sellers only include an estimate of variable consideration to extent it is "probable".
IFRS requires that estimates of variable consideration be included only when the likelihood of significant reversal of revenue is “probable”, and this is a stricter standard than the “reasonably possible” standard under U.S. GAAP.
Under U.S. GAAP, estimates of variable consideration are only included when the amount of the estimate is both “reasonably possible” and “probable”. Therefore, U.S. GAAP and IFRS do not convey the same likelihood when it comes to the uncertainty associated with the variable consideration.
Under IFRS, the seller must be more certain that there will not be a significant reversal of revenue before including the estimate, while under U.S. GAAP, the seller only needs to be reasonably certain that there is a possibility of a significant reversal.
For more such questions on revenue
https://brainly.com/question/13440727
#SPJ11
Give an example of security breaches as they relate to each of the six dimensions of e-commerce security. For instance, what would be a privacy incident?
E-commerce security involves protecting online transactions and the information exchanged during them. The six dimensions of e-commerce security are:
Integrity: Ensuring that information exchanged between parties is accurate and unaltered. A security breach in this dimension could involve a hacker changing the price of a product during a transaction, resulting in the customer paying more than intended.Availability: Ensuring that systems are available and accessible to authorized users. A security breach in this dimension could involve a DDoS attack, where a hacker overwhelms a website with traffic to make it unavailable to users.Confidentiality: Ensuring that sensitive information is kept private and not disclosed to unauthorized parties. A security breach in this dimension could involve a hacker stealing credit card information during a transaction and using it for fraudulent purchases.Authenticity: Ensuring that users and systems are who they claim to be. A security breach in this dimension could involve a hacker using a stolen identity to make purchases or access sensitive information.
To learn more about E-commerce click the link below:
brainly.com/question/31086520
#SPJ4
