Answer:
b, d, e
Explanation:
An atom is made up of electrons, protons and neutrons. Gold is an atom thus has the above particles.
What are the effects of acid precipitation in city centers
Answer:
Answer to the following question is as follows.
Explanation:
Acid rain causes harm to houses and buildings by dissolving stone or corroding metal exposed to the elements. Acid rain can degrade calcium carbonate or calcium-based chemicals found in some of these products.
The acidic particles damage metal and accelerate the deterioration of paint and stone. They also make buildings and other structures, like as monuments, filthy.
please provide is matter about us pure all NCERT questions and answers
Answer:
I hope that's what u were lookong for :))
Explanation:
How many ATOMS of boron are present in 3.61 grams of boron trifluoride ?
Answer:
To determine the number of atoms of Boron that are present within 3.61 grams of Boron Trifluoride, it would be best to convert the grams to moles of the compound and then after that use the Avogadro's number to determine the number of molecules and then use the 1 to 3 ratio to determine the total number of Boron atoms.
Determine the enthalpy for the reaction A+B --> C If we know the following:
A+E --> C+D; delta H = -200 kJ
D+B --> E; delta H = -100 kJ
Explanation:
here is the answer to the question
How could the experiment be changed to allow for a result to be shown for the insoluble food
colouring?
Answer:
no lo se yo hablo en español no en ingles
Una muestra de S2 (g) se coloca en un recipiente rígido vacío a 800 K y ésta ejerce una presión inicial de 0,92 atm, luego se combina para formar S8 (g) mediante la reacción: S2 (g) ⇆ S8 (g) Una vez alcanzado el equilibrio, la presión parcial de S2 (g) ha disminuido a 0,18 atm. Calcule Kp para la reacción a esta temperatura
Answer:g
Explanation:
I need answers to question 1,2,3
Answer:
1. 0.125 mole
2. 42.5 g
3. 0.61 mole
Explanation:
1. Determination of the number of mole of NaOH.
Mass of NaOH = 5 g
Molar mass of NaOH = 23 + 16 + 1
= 40 g/mol
Mole of NaOH =?
Mole = mass /molar mass
Mole of NaOH = 5/40
Mole NaOH = 0.125 mole
2. Determination of the mass of NH₃.
Mole of NH₃ = 2.5 moles
Molar mass of NH₃ = 14 + (3×1)
= 14 + 3
= 17 g/mol
Mass of NH₃ =?
Mass = mole × molar mass
Mass of NH₃ = 2.5 × 17
Mass of NH₃ = 42.5 g
3. Determination of the number of mole of Ca(NO₃)₂.
Mass of Ca(NO₃)₂ = 100 g
Molar mass of Ca(NO₃)₂ = 40 + 2[14 + (3×16)]
= 40 + 2[14 + 48]
= 40 + 2[62]
= 40 + 124
= 164 g/mol
Mole of Ca(NO₃)₂ =?
Mole = mass /molar mass
Mole of Ca(NO₃)₂ = 100 / 164
Mole of Ca(NO₃)₂ = 0.61 mole
True or false, Henry Moseley discovered through X-Ray crystallography the number of neutrons that were present
in the nucleus of atoms of every element.
Answer:
Im pretty sure its true
Explanation:
Answer:
answer is true .
Explanation:
this may help you
every action produces an equal and opposite -- ---------- when one object exterts a force on another object,the second object pushes back with the same amount of---------
someone knows the answer
thank you so much for putting all the answers in there
Answer:
[tex]\huge\color{cyan}{\colorbox{magenta}{Answer}}[/tex]
thank you
Methane is the main component of natural gas. Using the given reaction enthalpy, calculate the heat energy produced by the combustion of one kilogram of methane.
Answer: The heat energy produced is 53831.25KJ
Explanation:
METHANE is the main component of natural gas. It can undergo combustion reaction in air with a bright blue flame to produce carbondioxide and water. The heat of reaction (enthalpy) is negative because heat is absorbed during the chemical reaction. To calculate the heat energy produced by the combustion of one kilogram (1 kg) of methane the following steps are taken:
Molecular mass of methane =16 gm/mol.
So moles of 1 kg methane =
Given mass of methane ÷ molecular weight of methane
But the given mass = 1kg = 1000g
Therefore,
moles of 1000g methane = 1000÷16
= 62.5 moles
Hence, energy evolved = (moles of methane) × (heat of combustion)
Therefore,
heat energy produced= 62.5 × (-861.3kj)
= -53831.25kj
The heat energy produced by the combustion of one kilogram of methane is –53831.25 KJ
We'll begin by calculating the number of mole in 1 Kg of CH₄
Mass of CH₄ = 1 kg = 1000 g
Molar mass of CH₄ = 12 + (4×1) = 16 g/mol
Mole of CH₄ =?Mole = mass /molar mass
Mole of CH₄ = 1000 / 16
Mole = 62.5 moles Finally, we shall determine the heat energy produced from the reaction.CH₄ + 2O₂ —> CO₂ + 2H₂O ΔH = –861.3 KJ
From the balanced equation above,
1 mole of CH₄ reacted to produce –861.3 KJ.
Therefore,
62.5 moles of CH₄ will react to produce = 62.5 × –861.3 = –53831.25 KJ
Thus, –53831.25 KJ of heat energy is produced.
Complete Question is located in the attached photo
Learn more: https://brainly.com/question/13671340
If a reaction occurs, what will be the products of the unbalanced reaction below?
Cu(s) + Ni(NO3)2(aq)
The Activity Series of Elements
A.
CuNi(NO3)4(s)
B.
Ni(s) + Cu(NO3)2(aq)
C.
No reaction will occur.
D.
CuNi(s) + NO2(g)
Cu(s) + Ni(NO3)2(aq) ⇒Ni(s) + Cu(NO3)2(aq)
The answer is option B.
What is electrochemical series?
Electrochemical or hobby series when the electrodes (metals and non-metals) in touch with their ions are organized on the idea of the values of their preferred discount potentials or standard oxidation potentials, the resulting series is called the electrochemical.
The electrochemical series is built up by means of arranging various redox equilibria so as of their fashionable electrode potentials (redox potentials). The maximum poor E° values are placed at the pinnacle of the electrochemical series, and the maximum wonderful at the lowest.
Learn more about chemical equation here:-https://brainly.com/question/11231920
#SPJ2
Which best describes a swimming pool?
A.
It is a solute.
• B.
It IS
solvent.
C.
It is solution.
D.
It is a reactant.
•
E.
It is a product.
Answer:
Swimming pool is an example of solution
Explanation:
It has water (solvent) and dissolve ion (solute)
Answer:
it is a solution
Explanation:
the combining of (water and Cl and other pool chemicals) make it a solution.
(d) (i) How can the water molecules from the iceberg end up as water in the lake?
Explanation:
If the iceberg is near the lake and the water molecules melt, then the molecules will slide down. The iceberg could be melting for many reasons - it can be purposely destroyed, the sun could be melting it, or it might naturally fall in. So, this is the answer to your question. Hope it helps!
Balance the equation of. _C + _O2 -- _CO
Explanation:
2C +O2 = 2CO
this will be the answer
Trends in the periodic table indicate that the element with the greatest ionization energy is in which of the following periods and groups?
a
Period 2, Group 1
b
Period 7, Group 2
c
Period 6, Group 17
d
Period 1, Group 18
Answer:
D Period 1, Group 18
Explanation:
it's helium
it's top right corner of the periodic table
Which has more mass, 2 kg of steel or 5 kg of feather.
Answer:
5 kg of feather
Explanation:
Which redox reaction would most likely occur if silver and zinc metal were added to a solution that contained silver and zinc ions?
Answer:
D. Zn²⁺ + 2Ag → Zn + 2Ag⁺
Explanation:
On the reduction potential chart, we have that silver ion Ag⁺ is a stronger oxidizing agent than, zinc, Zn, which is a reducing reducing agent the compared to silver
Therefore, the redox reaction that will occur is that the zinc, Zn, will be oxidized to Zn²⁺ ion, while the silver, Ag²⁺ ion will be reduced to silver deposits Ag, therefore, the zinc will displace the silver in the solution containing silver and zinc ions because zinc is higher than silver in the reactivity series
The reduction potential Zn → Zn²⁺ + 2e⁻ = +0.76
The reduction potential for Ag⁺ + e⁻ → Ag = +0.8
Therefore, given that redox reactions are reversible, we get the following likely redux reaction;
Zn(s) + 2Ag⁺(aq) ⇄ 2Ag(s) + Zn²⁺(aq)
Therefore, from the given options;
Zn²⁺(aq) + 2Ag(s) → Zn(s) + 2Ag⁺(aq) is the reaction most likely to occur.
Cuál o cuáles de las siguientes características son correctas para la mayoría de los compuestos del carbono?
I) Los compuestos del carbono son solubles en disolventes no polares como el hexano, benceno, éter, etc.
II) Los compuestos del carbono generalmente presentan puntos de fusión y de ebullición bajos
III) La gran mayoría de los compuestos del carbono son combustibles, sean estos, gaseosos, líquidos o sólidos
IV) El enlace covalente es característico de los compuestos del carbono
Todas son correctas
II
I y IV
I, III y IV
Answer:
Todas son correctas
Explanation:
I) Los compuestos del carbono son solubles en disolventes no polares como el hexano, benceno, éter, etc. VERDADERO. La mayoría de los compuestos de carbono son apolares, y basados en la regla: Similar disuelve similar, podemos presumir que la mayoría de compuestos de carbono se disuelven en solventes no polares.
II) Los compuestos del carbono generalmente presentan puntos de fusión y de ebullición bajos. VERDADERO. Al ser sustancias apolares, sus fuerzas electrostáticas son bajas. De la misma manera, como su masa atómica es pequeña, las fuerzas de Van der Waals son despreciables haciendo que sus puntos de fusión y ebullición sean bajos respecto a sustancias de estrucutra similar.
III) La gran mayoría de los compuestos del carbono son combustibles, sean estos, gaseosos, líquidos o sólidos. VERDADERO. Los gases (Como el gas natural) son combustibles usados para cocina. Los líquidos (Como la gasolina) son combustibles y bastante inflamables. Los sólidos (Como la madera) se usan como combustibles para hacer asados o son el combustible en incendios forestales.
IV) El enlace covalente es característico de los compuestos del carbono. VERDADERO. La polaridad del carbono es neutral haciendo que la mayoría de los enlaces que forma sean covalentes.
Todas son correctas
Suppose that you chose sodium carbonate to precipitate the chromium ions from a solution of chromium (III) chloride. Write and balance the equation of this double-displacement reaction.
If the solution has a volume of 520 mL and the concentration of chromium (III) chloride is 0.224 M, how many grams of sodium carbonate should you add to the solution to precipitate out all the chromium ions?
Answer:
18.5g Na2CO3
Explanation:
Chromium (III) chloride, CrCl3, reacts with Na2CO3 as follows:
2CrCl3 + 3Na2CO3 → Cr2(CO3)3(s) + 6NaCl
Where 2 moles of CrCl3 react with 3 moles of Na2CO3 to produce 1 mole of Cr2(CO3)3 -The precipitate-
To solve this question we need to find the moles of CrCl3 added. With the chemical equation we can find the moles of Na2CO3 and its mass as follows:
Moles CrCl3:
520mL = 0.520L * (0.224mol/L) = 0.116 moles CrCl3
Moles Na2CO3:
0.116 moles CrCl3 * (3 mol Na2CO3 / 2mol CrCl3) = 0.175 moles Na2CO3
Mass Na2CO3 -Molar mass: 105.99g/mol-
0.175 moles Na2CO3 * (105.99g/mol) = 18.5g Na2CO3
A gas is put into a cosed container.
The container and the gas inside it are heated.
What will happen to the pressure inside the container?
Answer:
When gases in containers are heated, their molecules increase in average speed. This means that they exert a greater force when they collide with the container walls, and also collide with the walls more frequently. The gas is therefore under greater pressure when its temperature is higher.
What is the frequency of a wave that has a wavelength of 28 m? c = λυ where c = 2.998 x 108 m/s
a. 1.07 x 107 Hz
b. 2.3 x 107 Hz
c. 10 Hz
d. 10.7 Hz
Answer:
The frequency of a wave that has a wavelength of 28 m is 1.07*10⁷ Hz.
Explanation:
Wavelength is the minimum distance between two successive points on the wave that are in the same state of vibration. It is expressed in units of length (m).
Frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).
The propagation speed is the speed with which the wave propagates in the medium, that is, it is the magnitude that measures the speed at which the wave's disturbance propagates along its displacement. Relate the wavelength (λ) and the frequency (f) inversely proportional using the following equation:
v = f * λ.
Being:
v= 2.998*10⁸ m/sf= ?λ= 28 mReplacing:
2.998*10⁸ m/s= f* 28 m
Solving:
[tex]f=\frac{2.998*10^{8}m/s }{28m}[/tex]
f= 1.07*10⁷ Hz
The frequency of a wave that has a wavelength of 28 m is 1.07*10⁷ Hz.
what is the application of chemistry
Answer:
Chemistry plays an important and useful role towards the development and growth of a number of industries. This includes industries like glass, cement, paper, textile, leather, dye etc. We also see huge applications of chemistry in industries like paints, pigments, petroleum, sugar, plastics, Pharmaceuticals.
Cotton plant is mainly harvested at flowering stage true false
During a process called photoact, ________ give up an electron as a part of the light-dependent reactions.
Answer:
Chloroplasts?
Explanation:
 Help ASAP only right answers only no spam don’t answer if you don’t know
i know the answer is a theory
A chemical bond formed when two atoms share two pairs of electrons is a ________ bond; it is best described as ________.
Answer:
A chemical bond formed when two atoms share two pairs of electrons is a double bond; it is best described as a covalent bond.
Explanation:
A chemical bond in which two pairs of electrons are shared has to be defined as covalent since ionic bonds don't involve electron sharing. They consist only of electrostatic attraction between ions.
The combination of ions most likely to produce a precipitate is Group of answer choices Mg2 and C2H3O2-. Fe3 and OH-. Li and PO43-. Pb2 and NO3-. NH4 and SO42-.
Answer:
The combination of ions most likely to produce a precipitate is a group of answer choices:
lead nitrate soluble in water
Mg2+ and C2H3O2-.
Fe3+ and OH-.
Li+ and PO43-.
Pb2+ and NO3-.
NH4+ and SO42-.
Explanation:
Among the given options,
magnesium acetate, lithium phosphate, lead nitrate, ammonium sulfate are soluble in water.
The only one which is insoluble in water is [tex]Fe^3+[/tex] and [tex]OH^-[/tex] combination.
[tex]Fe(OH)_3[/tex] is insoluble in water. It forms a precipitate.
how many distinct monochlorinated products can result when methylcyclohexane is subjected to free radical chlorination under UV light
Answer:
How many distinct monochlorinated products can result when methylcyclohexane is subjected to free radical chlorination under UV light.
Explanation:
Consider 1-methylcyclohexane:
Its structure is shown below:
It has primary [tex]1^o[/tex], secondary [tex]2^o[/tex]and tertiary [tex]3^o[/tex] carbons as shown in the image.
So, the following mono chlorinated product will be formed.
radical example ....
