Which of the following processes have a ΔS < 0? Which of the following processes have a ΔS < 0? carbon dioxide(g) → carbon dioxide(s) water freezes propanol (g, at 555 K) → propanol (g, at 400 K) methyl alcohol condenses All of the above processes have a ΔS < 0.

Answer:

[tex]r_A=-1\frac{M}{s}[/tex]

Explanation:

Hello,

In this case, given the rate of production of C, we can compute the rate of consumption of A by using the rate relationships which include the stoichiometric coefficients at the denominators (-1 for A and 2 for C) as follows:

[tex]\frac{1}{-1} r_A=\frac{1}{2}r_C[/tex]

In such a way, solving the rate of consumption of A, we obtain:

[tex]r_A=-\frac{1}{2} r_C=-\frac{1}{2}*2\frac{M}{s}\\ \\r_A=-1\frac{M}{s}[/tex]

Clearly, such rate is negative which account for consumption process.

Regards.

Answer:Liquid

Explanation:

Answer:

1 L

Explanation:

ppm means parts per million. Generally the relationship between mass and litre is given as;

1 ppm = 1 mg/L

This means that 1 ppm is equivalent to 1 mg of a substance dissolved in 1 L of water.

Answer:

7.50 L

Explanation:

The balloon has a volume of 1.20 L (V₁) when the pressure at the sea floor is 6.25 atm (P₁). When it reaches the surface, the pressure is that of the atmosphere, that is, 1.00 atm (P₂). If we consider the gas to behave as an ideal gas and the temperature to be constant, we can calculate the final volume (V₂) using Boyle's law.

P₁ × V₁ = P₂ × V₂

V₂ = P₁ × V₁ / P₂

V₂ = 6.25 atm × 1.20 L / 1.00 atm

V₂ = 7.50 L

Answer:

1, C, Xe 2, B,He

Explanation:

1, cause as u go down a group the boiling point increases.

2, boiling point of single element is greater than a compound

According to  periodic trends in periodic table boiling point increases down the  group and hence Xe has highest boiling point and more amount of heat is required to boil an element hence He has highest boiling point.

Periodic table is a tabular arrangement of elements in the form of a table. In the periodic table, elements are arranged according to the modern periodic law which states that the properties of elements are a periodic function of their atomic numbers.

It is called as periodic because properties repeat after regular intervals of atomic numbers . It is a tabular arrangement consisting of seven horizontal rows called periods and eighteen vertical columns called groups.

Elements present in the same group have same number of valence electrons and hence have similar properties while elements present in the same period show gradual variation in properties due to addition of one electron for each successive element in a period.

Learn more about periodic table,here:

https://brainly.com/question/11155928

#SPJ2

Answer:

D. Malleable, conducts electricity, high melting point, giant structure, metallic lattice

Explanation:

Copper is a metal with an atomic number of 29. This metal is soft and reddish in color which explains why it is very malleable(beaten to form various shapes without breaking).

All metals are good conductors of electricity including copper which is also a metal. Metals generally are insoluble in water. Copper also has a high melting point which is a characteristic of metals due to their giant structure and metallic lattice which makes it difficult to be broken down.

Answer:

A (Atomic mass number or Nucleon number)

Explanation:

The mass number is the total number of protons and nucleons in an atomic nucleus.

Hope this helps.

Please mark Brainliest...

Answer:

That means that if you are calculating entropy change, you must multiply the enthalpy change value by 1000. So if, say, you have an enthalpy change of -92.2 kJ mol-1, the value you must put into the equation is -92200 J mol-1

The entropy change in the surroundings associated with this reaction occurring at 25 degree C is calculated as ΔS = -ΔH/T J/K.

Entropy is a quantity which gives idea about the randomness or arrangement of atoms or molecules present in any sample.

Entropy change will be calculated as:
ΔS = -ΔH/T, where

ΔH = chnage in enthalpy (J/mole)

T = temperature (K)

So to calculate the entropy change first we have to know about the value of enthalpy in joules and then divide it by the temperature.

Hence the unit of entropy is joule per kelvin.

To know more about entropy, visit the below link:
https://brainly.com/question/6364271

Answer:

C) SO3

Explanation:

Lewis formula shows the bonding between atoms of a molecule and expresses the lone pair present in the atoms.

SO3 or Sulfur trioxide cannot be adequately described by a single Lewis formula because it has majorly 3 resonance structures because Sulfur does not follow the octet rule and can expand electrons in its outer shell.

Hence, the correct answer is C) SO3

Answer:

[tex]Cd(s)|Cd^{2+}(aq) || Cu^{2+}(aq)|Cu(s)[/tex]

Explanation:

A galvanic cell is composed of two electrodes immersed in a suitable electrolyte and connected via a salt bridge. One of the electrodes serves as a cathode where reduction or gain of electrons takes place. The other half cell functions as an anode where oxidation or loss of electrons occurs.

The representation is given by writing the anode on left hand side followed by its ion with its molar concentration. It is followed by a salt bridge. Then the cathodic ion with its molar concentration is written and then the cathode.

As it is given that cadmium acts as anode, it must be on the left hand side and copper must be on right hand side.

[tex]Cd(s)|Cd^{2+}(aq) || Cu^{2+}(aq)|Cu(s)[/tex]

The given question is incomplete. The complete question is:

Compound X has a molar mass of 153.05 g/mol and the following composition:

element mass %

carbon 47.09%

hydrogen 6.59%

chlorine 46.33%

Write the molecular formula of X.

Answer: The molecular formula of X is [tex]C_6H_{10}Cl_2[/tex]

Explanation:

If percentage are given then we are taking total mass is 100 grams.

So, the mass of each element is equal to the percentage given.

Mass of C= 47.09 g

Mass of H = 6.59 g

Mass of Cl = 46.33 g

Step 1 : convert given masses into moles.

Moles of C =[tex]\frac{\text{ given mass of C}}{\text{ molar mass of C}}= \frac{47.09g}{12g/mole}=3.92moles[/tex]

Moles of H =[tex]\frac{\text{ given mass of H}}{\text{ molar mass of H}}= \frac{6.59g}{1g/mole}=6.59moles[/tex]

Moles of Cl =[tex]\frac{\text{ given mass of Cl}}{\text{ molar mass of Cl}}= \frac{46.33g}{35.5g/mole}=1.30moles[/tex]

Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.

For C = [tex]\frac{3.92}{1.30}=3[/tex]

For H = [tex]\frac{6.59}{1.30}=5[/tex]

For Cl =[tex]\frac{1.30}{1.30}=1[/tex]

The ratio of C : H: Cl= 3: 5 :1

Hence the empirical formula is [tex]C_3H_5Cl[/tex]

The empirical weight of [tex]C_3H_5Cl[/tex] = 3(12)+5(1)+1(35.5)= 76.5g.

The molecular weight = 153.05 g/mole

Now we have to calculate the molecular formula.

[tex]n=\frac{\text{Molecular weight }}{\text{Equivalent weight}}=\frac{153.05}{76.5}=2[/tex]

The molecular formula will be=[tex]2\times C_3H_5Cl=C_6H_{10}Cl_2[/tex]

Answer:

influencing consumer tastes

increasing product awareness

promoting company branding

Explanation:

Advertising is basically a form of communication using creative ideas and communicating benefits of the products. Advertising plays a very crucial role in product business and some of the important uses of advertising are as follows:

Hence, the correct options are:

Answer:

1,3,4

Explanation:

I took the test

Answer:

0.327 M

Explanation:

Step 1: Write the balanced equation

2 NH₃(g) ⇄ N₂(g) + 3H₂(g)

Step 2: Make an ICE chart

        2 NH₃(g) ⇄ N₂(g) + 3 H₂(g)

I              x             0            0

C          -2y            +y         +3y

E         x-2y             y           3y

Step 3: Find the value of y

The concentration of N₂ at equilibrium is 0.0161 M. Then,

y = 0.0161

Step 4: Find the value of x

The concentration of NH₃ at equilibrium is 0.295 M. Then,

x-2y = 0.295

x-2(0.0161) = 0.295

x = 0.327

Answer:

Triacontyl palmitate

Explanation:

In this case, we have a reaction between an acid and an alcohol. When we put together these kind of compounds an ester is produced. This reaction is called "esterification".

In our case, the alcohol is a structure with 30 carbon in which the "OH" group is bonded on carbon 1. The name of this compound is "n-triacontanol". The acid is a structure in which we have 16 carbon in which the "COOH" group is placed on carbon 1. The name of this compound is "palmitic acid". The ester produced by the acid and the alcohol is "Triacontyl palmitate".

See figure 1.

I hope it helps!

Answer:

There are fifteen molecular orbitals in benzene filled with electrons.

Explanation:

Benzene is an aromatic compound. Let us consider the number of bonding molecular orbitals that should be present in the molecule;

There are 6 C-C σ bonds, these will occupy six bonding molecular orbitals filled with electrons.

There are 6 C-H σ bonds, these will occupy another six molecular orbitals filled with electrons

The are 3 C=C π bonds., these will occupy three bonding molecular pi orbitals.

All these bring the total number of bonding molecular orbitals filled with electrons to fifteen bonding molecular orbitals.

Answer:

a. Methanol remains the same

b. Methanol decreases

c. Methanol increases

d. Methanol remains the same

e. Methanol increases

Explanation:

Methanol is produced by the reaction of carbon monoxide and hydrogen in the presence of a catalyst as follows; 2H2+CO→CH3OH.

a) The presence or absence of a catalyst makes no difference on the equilibrium position of the system hence the methanol remains constant.

b) The amount of methanol decreases because the equilibrium position shifts towards the left and more reactants are formed since the reaction is exothermic.

c) If the volume is decreased, there will be more methanol in the system because the equilibrium position will shift towards the right hand side.

d) Addition of helium gas has no effect on the equilibrium position since it does not participate in the reaction system.

e) if more CO is added the amount of methanol increases since the equilibrium position will shift towards the right hand side.

Answer:

[tex]1.25~mol~H_2O[/tex] and [tex]0.627~mol~N_2[/tex]

Explanation:

Our goal for this question is the calculation of the number of moles of the molecules produced by the reaction of hydrazine ([tex]N_2H_4[/tex]) and oxygen ([tex]O_2[/tex]). So, we can start with the reaction between these compounds:

[tex]N_2H_4~+~O_2~->~N_2~+~H_2O[/tex]

Now we can balance the reaction:

[tex]N_2H_4~+~O_2~->~N_2~+~2H_2O[/tex]

In the problem, we have the values for both reagents. Therefore we have to calculate the limiting reagent. Our first step, is to calculate the moles of each compound using the molar masses values (32.04 g/mol for [tex]N_2H_4[/tex] and 31.99 g/mol for [tex]O_2[/tex]):

[tex]20.1~g~N_2H_4\frac{1~mol~N_2H_4}{32.04~g~N_2H_4}=0.627~mol~N_2H_4[/tex]

[tex]20.1~g~O_2\frac{1~mol~O_2}{31.99~g~O_2}=0.628~mol~O_2[/tex]

In the balanced reaction we have 1 mol for each reagent (the numbers in front of [tex]O_2[/tex] and [tex]N_2H_4[/tex] are 1). Therefore the smallest value would be the limiting reagent, in this case, the limiting reagent is [tex]N_2H_4[/tex].

With this in mind, we can calculate the number of moles for each product. In the case of [tex]N_2[/tex] we have a 1:1 molar ratio (1 mol of [tex]N_2[/tex] is produced by 1 mol of [tex]N_2H_4[/tex]), so:

[tex]0.627~mol~N_2H_4\frac{1~mol~N_2}{1~mol~N_2H_4}=~0.627~mol~N_2[/tex]

We can follow the same logic for the other compound. In the case of [tex]H_2O[/tex] we have a 1:2 molar ratio (2 mol of [tex]H_2O[/tex] is produced by 1 mol of [tex]N_2H_4[/tex]), so:

[tex]0.627~mol~N_2H_4\frac{2~mol~H_2O}{1~mol~N_2H_4}=~1.25~mol~H_2O[/tex]

I hope it helps!

Explanation:

a. Esters

b. Carboxylic acids

c. Esters (ethyl hexanoate smells like pineapple)

d. Carboxylic acids (produces a carboxylic salt)

For the given phrases the following description is better.

a. Esters

b. Carboxylic acids

c. Esters (ethyl hexanoate smells like pineapple)

d. Carboxylic acids (produces a carboxylic salt)

An ester is a synthetic compound got from a corrosive in which somewhere around one - OH hydroxyl bunch is supplanted by an - O-alkyl (alkoxy) bunch, as in the replacement response of a carboxylic acid and a liquor.

Carboxylic acid is any of a class of natural mixtures in which a carbon (C) particle is clung to an oxygen (O) molecule by a twofold bond and to a hydroxyl bunch (―OH) by a solitary bond.

Find more information about esters here:

brainly.com/question/9165411

Answer:

Difference of the enthalpy (of a system) minus the product of the entropy and absolute temperature

Explanation:

The basis of spontaneity in a chemical reaction is that ∆G must be negative. ¡∆G is known as the change in free energy of a system. If ∆G is negative, then the reaction will occur without any external help (the reaction is spontaneous at room temperature).

∆G is given by;

∆G= ∆H -T∆S

Where;

∆H= change in enthalpy of the system

T= absolute temperature of the system

∆S= change in entropy

Hence; when ∆H -T∆S gives a negative result, the reaction proceeds without any external help.

The element which can not loose electron easily and having electronagtive character is called non-metal it has following property-

1. it can not conduct heat and electricity

2. it is netiher ductile not malleable

3. it is not lsuturous and also not sonorous

Explanation:

a nonmetal (or non-metal) is a chemical element that mostly lacks the characteristics of a metal. Physically, a nonmetal tends to have a relatively low melting point, boiling point, and density. A nonmetal is typically brittle when solid and usually has poor thermal conductivity and electrical conductivity. Chemically, nonmetals tend to have relatively high ionization energy, electron affinity, and electronegativity. They gain or share electrons when they react with other elements and chemical compounds. Seventeen elements are generally classified as nonmetals: most are gases (hydrogen, helium, nitrogen, oxygen, fluorine, neon, chlorine, argon, krypton, xenon and radon); one is a liquid (bromine); and a few are solids (carbon, phosphorus, sulfur, selenium, and iodine). Metalloids such as boron, silicon, and germanium are sometimes counted as nonmetals.

Answer:

It will react with water

Explanation:

I know this is an older question, but I just wanted to provide the correct answer.

Since we are dealing with a weak base, and the acid is somewhat stronger, it will react with the water molecules to produce hydronium, which will affect the pH of the solution.

The conjugate base of a weak acid affect pH because it will react with hydronium ion.

A weak acid is an acid that does not dissociate completely in water. On the other hand, a strong acid achieves almost 100% dissociation in water.

Acids dissociate in water to yield the hydronium ion and a conjugate base. For instance, the weak acid, acetic acid is dissociated as follows;

CH3COOH(aq) + H2O(l) ⇄ CH3COO-(aq) + H3O+(aq)

We can see that the conjugate base( CH3COO-) could react with the hydronium ions thereby moving the equilibrium position to the left hand side and affecting the pH by decreasing the hydronium ion concentration.

Learn more: https://brainly.com/question/8592296

Missing parts;

Why will the conjugate base of a weak acid affect pH? Select the correct answer below: O it will react with hydroxide O it will react with water O it will react with hydronium O none of the above

Answer:

C

Explanation:

According to the mole ratio, using 2NH3 will give you 3H2. Which means in order to find the moles of H2 you would only need to divide 2 and multiply 3 to get the amount of moles of H2 produced.

Answer:

I think it's C

Explanation:

Please, tell me if I'm incorrect.

Answer:

0.17 lb

Explanation:

78 g * (1 lb/454 g)=0.17 lb

If you want additional help with chemistry or another subject for FREE, check out growthinyouth.org.

Answer:

Higher frequency than visible light -  Ultraviolet light, X-rays, and Gamma rays

Lower frequency than visible light - Infrared radiation, microwaves, and Radio waves

Explanation:

The frequencies of electromagnetic radiations vary according to their wavelengths. The relationship between the frequency and wavelength of the waves is expressed such that:

      λ = c/f, where λ = wavelength, c = speed of light, and f = frequency.

Thus, there is an inverse relationship between the wavelength and the frequency of electromagnetic waves.

The order of the electromagnetic waves based on their frequency from the lowest to the highest is radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma-rays

Hence, electromagnetic waves with higher frequencies than visible light include ultraviolet light, X-rays, and Gamma rays while those with lower frequencies include Infrared radiation, microwaves, and Radio waves.

Answer:

need points

Explanation:

Answer:

Explanation:

MnO₂(s) + 4 HCl(aq)  = MnCl₂(aq) + 2 H₂O(l) + Cl₂

87 g                                                                     22.4 x 10³ mL

volume of given chlorine gas at NTP or at 760 Torr and 273 K

=  175 x ( 273 + 25 ) x 715 / (273 x 760 )

= 179.71 mL

22.4 x 10³ mL of chlorine requires 87 g of MnO₂

179.4 mL of chlorine will require    87 x 179.4 / 22.4 x 10³ g

= 696.77 x 10⁻³ g

= 696.77 mg .

Answer:

[Ag⁺] = 5.0x10⁻¹⁴M

Explanation:

The product solubility constant, Ksp, of the insoluble salts PbI₂ and AgI is defined as follows:

Ksp(PbI₂) = [Pb²⁺] [I⁻]² = 1.4x10⁻⁸

Ksp(AgI) = [Ag⁺] [I⁻] = 8.3x10⁻¹⁷

The PbI₂ just begin to precipitate when the product  [Pb²⁺] [I⁻]² = 1.4x10⁻⁸

As the initial [Pb²⁺] = 0.0050M:

[Pb²⁺] [I⁻]² = 1.4x10⁻⁸

[0.0050] [I⁻]² = 1.4x10⁻⁸

[I⁻]² = 1.4x10⁻⁸ / 0.0050

[I⁻]² = 2.8x10⁻⁶

So, as the [I⁻] concentration is also in the expression of Ksp of AgI and you know concentration in solution of I⁻ = 1.67x10⁻³M:

[Ag⁺] [I⁻] = 8.3x10⁻¹⁷

[Ag⁺] [1.67x10⁻³] = 8.3x10⁻¹⁷

Explanation:

they are called hydrocarbyls

pls mark me brainliest

Answer:

The first carbon atom that attaches to the functional group is referred to as the alpha carbon.

Answer:

The empirical formulae for the compound is CH3.

Answer:

Oxidation half equation;

3Cd(s) -------> 3Cd^2+(aq) + 6e

Reduction half equation;

2In^3+(aq) + 6e -----> 2In(s)

Explanation:

Since the reduction potentials of Indium and Cadmium are -0.34 V and - 0.40 V respectively, we can see that cadmium will be oxidized while indium will the reduced.

We arrived at this conclusion by examining the reduction potential of both species. The specie with more negative reduction potential is oxidized in the process.

Oxidation half equation;

3Cd(s) -------> 3Cd^2+(aq) + 6e

Reduction half equation;

2In^3+(aq) + 6e -----> 2In(s)