Answer:
CHCI3
Explanation:
there are no free CI ions hence it doesnt precipitate with an aqeous solution of AQUO33
Many home barbeques are fueled with propane gas (C3H8)(C3H8). Part A What mass of carbon dioxide is produced upon the complete combustion of 27.9 LL of propane (the approximate contents of one 5-gallon tank)
Answer:
41264 g of CO₂
Explanation:
Combustion reaction is:
C₃H₈ + 5O₂ → 3CO₂ + 4H₂O
1 mol of propane react to 5 moles of oxygen in order to proudce 3 moles of carbon dioxide and 4 moles of water.
In a combustion reaction, our reactant reacts to oxygen and the products are always CO₂ and water.
We have the volume of propane but we need moles of it, so we need to apply density.
Density = mass / volume so mass = density . volume.
Density of propane is: 493 g/L
Mass of propane is 493 g/L . 27.9L = 13754.7 g
We convert mass to moles: 13754.7 g . 1 mol/ 44g = 312.6 moles
According to reaction, 1 mol of propane can produce 3 moles of CO₂
Our 312.6 moles will produce 312.6 . 3 = 937.8 moles
We convert moles to mass: 937.8 mol . 44 g/mol = 41264 g
Sugar is added to water and initially completely dissolves, but eventually solid sugar collects on the bottom of the container. Sugar and water are ________partially miscible . This produces a dynamic equilibrium. Ethanol (a liquid) is added to water and only a single layer is observed no matter how much ethanol is added. Ethanol and water are__________
Answer: Sugar is added to water and initially completely dissolves, but eventually solid sugar collects on the bottom of the container. Sugar and water are both partially miscible. This produces a dynamic equilibrium. Ethanol (a liquid) is added to water and only a single layer is observed no matter how much ethanol is added. Ethanol and water are miscible.
Explanation:
When a substance (solute) dissolves partially in a solvent then it is known as partially miscible in the solvent. In such cases, a small amount of solute remains at the bottom of solution.
If a solute dissolves completely in solvent like water such that only one layer is seen in the solution then it means that the solute is miscible in solvent.
Thus, we can conclude that sugar is added to water and initially completely dissolves, but eventually solid sugar collects on the bottom of the container. Sugar and water are both partially miscible. This produces a dynamic equilibrium. Ethanol (a liquid) is added to water and only a single layer is observed no matter how much ethanol is added. Ethanol and water are miscible.
Acetic acid and water react to form hydronium cation and acetate anion, like this:
HCH3CO2(aq) + H2O → H3O+(l)(aq) + CH3CO2^-(aq)
Imagine 226 mmol of CH3CO2- are added to a flask containing a mixture of HCH3CO2, H2O, H3O + and CH3CO2- at equilibrium.
Required:
What is the rate of the reverse reaction before any CH3CO2^- has t:een added to the flask?
Answer:
The rate of the reverse reaction before any addition of CH3CO2- is zero
Explanation:
When the reaction is in equilibrium:
HCH3CO2(aq) + H2O ⇄ H3O+(l)(aq) + CH3CO2^-(aq)
The reaction quotient, Q = Ka and no more products or reactants are produced because their concentrations are in the right proportion.
Now, as no reaction occurs,
The rate of the reverse reaction before any addition of CH3CO2- is zeroThe chemical formula is different from the empirical formula in
Answer:be careful and relax
Explanation:
Answer:
Hahaha be careful and relax
8.7 Two products are formed in the following reaction in a 50:50 mixture. Would the resulting solution be optically active
Answer:
Yes. The solution would be optically active.
Explanation:
Diastereomer are defined as the image that is non mirror and non -identical. It is made up of two stereoisomers. They are formed when the two stereoisomers or more than two stereoisomers of the compound have the same configuration at the equivalent stereocenters.
In the given context, as the product given is a diastereomeric mixture, the product would have an optical activity in total.
So the answer is Yes.
liquid junction potential arise due to?
Answer:
liquid junction potentials
when a cell contains a boundary between two electrolytic solutions of different composition or concentration, a liquid junction potential is developed due to the "diffusion of the various components at characteristic rates in the boundary zone."
#carryonlearning
During a reaction, ΔH for reactants is −750 kJ/mol and ΔH for products is 920 kJ/mol. Which statement is correct about the reaction? (5 points)
Group of answer choices
It is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed.
It is endothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed.
It is exothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed.
It is exothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed.
Answer: The statement it is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed, is true.
Explanation:
A chemical reaction in which heat energy is released is called an exothermic reaction. For exothermic reactions, the value of [tex]\Delta H[/tex] is always negative.
A chemical reaction in which heat energy is absorbed is called an endothermic reaction. For endothermic reaction, the value of [tex]\Delta H[/tex] is always positive.
In endothermic reactions, energy required for breaking the bonds between reactants is less than the energy when products are formed due to which the value of [tex]\Delta H[/tex] remains positive.
Thus, we can conclude that the statement it is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed, is true.
It is endothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed. The correct option is B.
The above reaction is endothermic because more energy is produced when new bonds form in the products (H = 920 kJ/mol) than is required to break bonds in the reactants (H = -750 kJ/mol).
In an endothermic process, more energy than is generated during bond creation is absorbed from the environment to dissolve existing bonds. This causes a net absorption of energy, which cools the system.
The reaction takes more energy than it releases, proving its endothermic nature, as seen by the positive difference between the energy needed to dissolve bonds and the energy released during bond formation.
Thus, the correct option is B.
For more details regarding endothermic process, visit:
https://brainly.com/question/28909381
#SPJ3
Your question seems incomplete, the probable complete question is:
During a reaction, ΔH for reactants is −750 kJ/mol and ΔH for products is 920 kJ/mol. Which statement is correct about the reaction? (5 points)
Group of answer choices
A. It is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed.
B. It is endothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed.
C. It is exothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed.
D. It is exothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed.
A balloon contains 0.118 mol of gas and has a volume of 2.58 L . If an additional 0.116 mol of gas is added to the balloon (at the same temperature and pressure), what will its final volume be? Can you also show the work so I can understand why is it that answer. thank you
Answer:
v2=5.11L
Explanation:
given
v1=2.58L
N1=0.118mol
N2=0.234
v2=x
according to charles law V1/N1=V2/N2
2.58/0.118=V2/0.234
21.86=V2/0.234
21.86×0.234= v2
5.116L=v2
5.116L is the
answer or u can simplify it and make 5.1 L
Identify the intermolecular attractions for dimethyl ether and for ethyl alcohol. Which molecule is expected to be more soluble in water? Explain.
Answer:
See explanation
Explanation:
All molecules possess the London dispersion forces. However London dispersion forces is the only kind of intermolecular interaction that exists in nonpolar substances.
So, the only kind of intermolecular interaction that exists in dimethyl ether is London dispersion forces.
As for ethyl alcohol, the molecule is polar due to the presence of polar O-H bond. In addition to London dispersion forces, dipole-dipole interactions and specifically hydrogen bonding also occurs between the molecules.
Because ethyl alcohol is polar, it is more soluble in water than dimethyl ether.
Calculate the volume in liters of a 1.60 mol/L sodium nitrate solution that contains of sodium nitrate . Round your answer to significant digits.
Answer:
1.5L of NaNO3 must be present
Explanation:
That contains 200g of sodium nitrate. Round to 2 significant digits
To solve this question we need to convert the mass of NaNO3 to moles using its molar mass (85g/mol). With the moles and the molar concentration we can find the volume in liters of the solution:
Moles NaNO3:
200g * (1mol / 85g) = 2.353 moles NaNO3
Volume:
2.353 moles NaNO3 * (1L / 1.60moles) =
1.5L of NaNO3 must be presentThe position of the equilibrium for a system where K = 6.4 × 10 9 can be described as being favoring ________________
Answer:
to the right (products side)
Explanation:
The equilibrium constant K describes the ratio between the concentration of products and reactants at equilibrium. For a general reaction:
a A + b B → c C + d D
The equilibrium constant expression is:
[tex]K = \frac{[C]^{c} [D]^{d} }{[A]^{a} [B]^{b} }[/tex]
A low value of K indicates that the concentration of products (C and D) is low in relation with the concentration of reactants (A and B).
Conversely, a high value of K indicated that the concentration of products is high compared with the concentration of reactants.
Since K = 6.4 × 10⁹ is a high value, the concentration of products is higher than the concentration of reactants at equilibrium. Thus, the position of the equilibrium is favored to the right.
g A sample of chlorine gas starting at 681 mm Hg is placed under a pressure of 991 mm Hg and reduced to a volume of 513.7 mL. What was the initial volume, in mL, of the chlorine gas container if the process was performed at constant temperature?
Answer:
747.5 mL
Explanation:
Assuming ideal behaviour, we can solve this problem by using Boyle's law, which states that at constant temperature:
P₁V₁ = P₂V₂Where in this case:
P₁ = 681 mm HgV₁ = ?P₂ = 991 mm HgV₂ = 513.7 mLWe input the data given by the problem:
681 mm Hg * V₁ = 991 mm Hg * 513.7 mLAnd solve for V₁:
V₁ = 747.5 mLg Elimination reaction simulation, Kim had tried to prepare cyclohexene from cyclohexanol using HCl as a catalyst, but he got a weird side product cyclohexyl chloride. Cyclohexyl chloride is formed possibly from the side reaction called A. SN1 substitution reaction B. E2 reaction C. E1 reaction D. SN2 substitution reaction
Answer:
SN1 substitution reaction
Explanation:
cyclohexanol is a secondary alkanol. The mechanism of acid catalysed dehydration of cyclohexanol involves the protonation of the -OH group.
This is followed by loss of water which is a good leaving group. At this stage, a proton could be abstracted to yield cyclohexene by E1 mechanism or an SN1 substitution reaction may occur to yield Cyclohexyl chloride.
The both reactions are equally likely.
The first law of thermodynamics defines chemical energy. defines entropy. is a statement of conservation of energy. provides a criterion for the spontaneity of a reaction.
Answer: The first law of thermodynamics is a statement of conservation of energy.
Explanation:
According to the first law of thermodynamics, heat provided to a system is actually the sum of internal energy and work done by the system or on the system.
Mathematically, [tex]\Delta Q = \Delta U + \Delta W[/tex]
The first law of thermodynamics also means that energy can neither be created nor it can be destroyed. Hence, energy is conserved.
Thus, we can conclude that the first law of thermodynamics is a statement of conservation of energy.
A student dropped a pea size amount of K2CO3 into a solution of HCl(aq). He observed the formation of gas bubbles and collected the gas into another test tube. The student performed a splint test and observed that the splint was extingished when he placed the splint into the test tube of the gas. What can be said about the results of this students experiment?
a. The student completed the experiment correctly and there were no errors in the experiment.
b. The experiment was performed incorrectly. K2CO3 doesn't react with HCl. Therefore, the student picked up the wrong compound when conducting the experiment.
c. The student performed the splint test incorrectly. He should of observed the splint flare up when the splint was placed in the test tube.
d. The student performed the splint test incorrectly. He should of observed a popping sound when the splint was placed in the test tube.
Answer:
The student completed the experiment correctly and there were no errors in the experiment.
Explanation:
When a pea size amount of K2CO3 is dropped into a solution of HCl, the following reaction occurs;
K2CO3(s) + 2HCl(aq) ----> 2KCl(aq) + CO2(g) + H2O(l)
The gas CO2 does not support burning hence, when the student performed a splint test and observed that the splint was extinguished when he placed the splint into the test tube of the gas.
Hence, the experiment was properly conducted and the student completed the experiment correctly and there were no errors in the experiment.
Why the catalytic and optical properties of nanomaterial are different from bulk material
Answer:
The material properties of nanostructures are different from the bulk due to the high surface area over volume ratio and possible appearance of quantum effects at the nanoscale. ... Yu; they found that the structural distortions on the quantum dots depend both on the kind of dopant and on the size of the dots.
Explanation:
hope it helps
What mass of steam initially at 120oC is needed to warm 200g of water in a glass container from 20.0 oC to 50.0 oC
Complete question:
What mass of steam initially at 120 ⁰C is needed to warm 200g of water in a 100 g glass container from 20.0 oC to 50.0 ⁰C
Answer:
the initial mass of the steam is 10.82 g
Explanation:
Given;
mass of water, m₁ = 200 g
mass of the glass, m₂ = 100 g
temperature of the steam = 120 ⁰C
initial temperature of the water, 20⁰ C
final temperature of the water, = 50⁰ C
let the mass of the steam = m
specific heat capacity of water c = 1 cal/g ⁰ C
specific heat capacity of glass c₂ = 0.2 cal/g ⁰ C
laten heat of vaporization of steam L = 540 cal/g
Apply principle of conservation energy;
Heat given off by the steam = Heat absorbed by water + heat absorbed by glass
[tex]mc\Delta T_1 + mL + mc\Delta T_2 = m_1c\Delta T_3 + m_2c_2\Delta T_3\\\\mc\Delta T_1 + mL + mc\Delta T_2 = [m_1c + m_2c_2]\Delta T_3[/tex]
m(1) (120 - 100) + m(540) + m(1) (100 - 50) = [200(1) + 100(0.2)] (50 - 20)
20m + 540m + 50m = 6600
610 m = 6600
m = 6600 / 610
m = 10.82 g
Therefore, the initial mass of the steam is 10.82 g
Complete and balance the equations for the given single displacement reactions. Write the reaction in molecular form. Phases are optional. If you need to clear your work and reset the equation, click the CLR button.Li(s) + H2O---------- Ca(s) + H2O ---------------
Answer:
Li(s) + H2O(l) -----> LiOH(aq) + H2(g)
Ca(s) + 2H2O(l) ---------------> Ca(OH)2(aq) + H2(g)
Explanation:
Metals react with water to yield the metal hydroxide and hydrogen gas as shown in the answer above.
The reaction equations were balanced, the number of atoms of each element on both side of the reaction equation is exactly the same.
This is the way to write a balanced reaction equation for the species shown in the question.
Draw the Lewis structure for the polyatomic formate anion. Be sure to include all resonance structures that satisfy the octet rule.
Answer:
Lewis structure of polyatomic formate anion.
Explanation:
To draw Lewis structure for any chemical species,
1)Count the total number of valence electrons present in it.
This can be obtained by adding valence electrons of each constituent atom.
2)Arrange those valence electrons in such a way that each atom should attain eight electrons around it to satisfy octet theory.
The structure of formate ion and its Lewis structure are shown below:
HCOO- is the formate ion.
It has total:
1+4+6+6+1 = 18 valence electrons.
Since, hydrogen has one, carbon has four and oxygen has six valence electrons and the charge of the anion is one.
Arrange this 18 electrons in such a way that each atom should get 8 electrons around it.
Resonance structures of formate ion:
How much carbon dioxide is released when it is fully combusted with 4Kg of ethanol with more than enough oxygen? How do you work it out?
Answer:
7.640 kg
Explanation:
Step 1: Write the balanced complete combustion equation for ethanol
C₂H₆O + 3 O₂ ⇒ 2 CO₂ + 3 H₂O
Step 2: Calculate the moles corresponding to 4 kg (4000 g) of C₂H₆O
The molar mass of C₂H₆O is 46.07 g/mol.
4000 g × 1 mol/46.07 g = 86.82 mol
Step 3: Calculate the moles of CO₂ released
86.82 mol C₂H₆O × 2 mol CO₂/1 mol C₂H₆O = 173.6 mol CO₂
Step 4: Calculate the mass corresponding to 173.6 moles of CO₂
The molar mass of CO₂ is 44.01 g/mol.
173.6 mol × 44.01 g/mol = 7640 g = 7.640 kg
Which is the primary type of radiation from the sun that is absorbed by the ozone layer?
A. infrared radiatin
B. UV-B
C. X-rays
D. UV-C
E. UV-A
the answer to the question is B.UV-B
Which of the following was NOT explained by Dalton's atomic theory?
ANSWER:
A. the Law of Multiple Proportions
B. the difference between elements and compounds
C.?the difference between isotopes of an element
D. the Law of Conservation of Mass
Answer:
A. the Law of Multiple Properties
Answer:
A. the law of multiple proportions
A 46.6-mgmg sample of boron reacts with oxygen to form 150 mgmg of the compound boron oxide. Part A What is the empirical formula of boron oxide
Answer:
B₂O₃
Explanation:
Step 1: Calculate the mass of oxygen in 150 mg of boron oxide
Of 150 mg of boron oxide, 46.6 mg belong to boron. The mass of oxygen is:
150 mg - 46.6 mg = 103.4 mg
Step 2: Calculate the percent by mass of each element
We will use the following expression.
%Element = mElement/mCompound × 100%
%B = 46.6 mg/150 mg × 100% = 31.1%
%O = 103.4 mg/150 mg × 100% = 68.9%
Step 3: Divide each percentage by the atomic mass of the element
B: 31.1/10.81 = 2.88
O: 68.9/16.00 = 4.31
Step 4: Divide both numbers by the smallest one (2.88)
B: 2.88/2.88 = 1
O: 4.31/2.88 ≈ 1.5
Step 5: Multiply both numbers by 2 so that they are integers
B: 1 × 2 = 2
O: 1.5 × 2 = 3
The empirical formula is B₂O₃.
define saturated and unsaturated fats
Answer:
unsaturated fats, which are liquid at room temperature,are different from saturated fat because they contain one or more double bonds and fewer hydrogen atoms on their carbon chain.
17. The density of a population would influence which limiting factor?
O niche
O growth rate
O weather
O space
Answer:
The answer is growth rate
Explanation:
it will help you
Assuming equal concentrations and complete dissociation, rank these aqueous solutions by their freezing points from highest to lowest. CoCl3, NH4Cl, Li2SO4
Answer:
NH4Cl > Li2SO4 > CoCl3
Explanation:
Let us recall that the freezing point depression depends on the molality of the solution and the number of particles present.
Let us also recall that freezing point depression is a colligative property. It depends on the number of particles present in solution.
Usually, the more the number of particles present, the lower the freezing point. Hence, NH4Cl which has only two particles will have the highest freezing point while CoCl3 which has four particles will have the lowest freezing point.
Zn-64 = 48.63%
Zn-66 = 27.90%
Zn-67 = 4.10%
Zn-68 = 18.75%
Zn-70 = .62%
Calculate the average atomic mass/given their percent abundance
Answer:
A = 65.46 u
Explanation:
Given that,
The composition of zinc is as follows :
Zn-64 = 48.63%
Zn-66 = 27.90%
Zn-67 = 4.10%
Zn-68 = 18.75%
Zn-70 = .62%
We need to find the average atomic mass of the given element. It can be solved as follows :
[tex]A=\dfrac{48.63\times 64+27.90\times 66+4.1\times 67+18.75\times 68+0.62\times 70}{100}\\A=65.46\ u[/tex]
So, the average atomic mass of zinc is 65.46 u.
Question 1
1 pts
How many mols of bromine are present in 35.7g of
Tin(IV) bromate?
Answer:
n = 0.0814 mol
Explanation:
Given mass, m = 35.7g
The molar mass of Tin(IV) bromate, M = 438.33 g/mol
We need to find the number of moles of bromine. We know that,
No. of moles = given mass/molar mass
So,
[tex]n=\dfrac{35.7}{438.33}\\\\n=0.0814\ mol[/tex]
So, there are 0.0814 moles of bromine in 35.7g of Tin(IV) bromate.
calculate the molarity in a 0.550 m solution of NaCl in water. Assume that the solution density is 1.03g/mol
Answer:
M=0.549M
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to perform this calculation by firstly assuming we have 1 kg of water as the solvent so that we have 0.550 moles of NaCl as well. Moreover, we realize we have 1000 grams of water and the correct mass of the solution can be calculated by converting 0.550 moles of NaCl to grams by using its molar mass:
[tex]m_{solute}=0.550mol*\frac{58.44 g}{1mol}= 32.14g\\\\m_{solution}=1000g+32.14g=1032.14g[/tex]
And subsequently, the volume in liters by using the density and the correct conversion factor:
[tex]V_{solution}=1032.14g*\frac{1mL}{1.03g} *\frac{1L}{1000mL} =1.002L[/tex]
Finally, the molarity will be:
[tex]M=\frac{0.550mol}{1.002L} =0.549M[/tex]
Regards!
Give the following reaction: ammonium nitrate—> dinitrogen monoxide + water.
a.) Write a complete balanced chemical equation.
b.) Calculate the number of molecules of water produced by 11.2g of ammonium nitrate
Answer:
a) NH₄NO₃ ⇒ N₂O + 2 H₂O
b) 1.69 × 10²³ molecules
Explanation:
Step 1: Write the balanced equation
NH₄NO₃ ⇒ N₂O + 2 H₂O
Step 2: Convert 11.2 g of NH₄NO₃ to moles
The molar mass of NH₄NO₃ is 80.04 g/mol.
11.2 g × 1 mol/80.04 g = 0.140 mol
Step 3: Calculate the moles of H₂O produced
0.140 mol NH₄NO₃ × 2 mol H₂O/1 mol NH₄NO₃ = 0.280 mol H₂O
Step 4: Calculate the number of molecules in 0.280 moles of water
We will use Avogadro's number.
0.280 mol × 6.02 × 10²³ molecules/1 mol = 1.69 × 10²³ molecules
