Which statements about the dilation are true? Check all that apply. Triangle X prime Y prime Z prime. Point X prime is 2 units from the center of dilation C and point Z prime is 3 units from the center of dilation. Triangle X Y Z. Point X is 5 units from point C and point Z is 7.5 units from point C. The center of dilation is point C. It is a reduction. It is an enlargement. The scale factor is 2.5. The scale factor is Two-fifths.

Answer:

The value of [tex]4^{\dfrac{1}{3}} {\cdot} 4^{\dfrac{1}{5}[/tex]  is  [tex]4^{\dfrac{8}{15}}[/tex] .

Step-by-step explanation:

We need to simplify the numeric expression using property. The expression is as follows :

[tex]4^{\dfrac{1}{3}} {\cdot} 4^{\dfrac{1}{5}[/tex]

The property to be used is : [tex]x^a{\cdot} x^b=x^{a+b}[/tex]

This property is valid if the base is same. Here, base is x.

In this given problem, x = 4, a = 1/3 and b = 1/5

So,

[tex]4^{\dfrac{1}{3}} {\cdot} 4^{\dfrac{1}{5}}=4^{\dfrac{1}{3}+\dfrac{1}{5}}\\\\=4^{\dfrac{5+3}{15}}\\\\=4^{\dfrac{8}{15}}[/tex]

So, the value of [tex]4^{\dfrac{1}{3}} {\cdot} 4^{\dfrac{1}{5}[/tex]  is  [tex]4^{\dfrac{8}{15}}[/tex] .

Complete Question

An IQ test is designed so that the mean is 100 and the standard deviation is 24 for the population of normal adults. Find the sample size necessary to estimate the mean IQ score of statistics students such that it can be said with 95% confidence that the simple mean is with in 3 IQ points of the true mean. Assume that standard deviation  = 24 and determine the required sample size using technology. Determine if this is a reasonable sample size for a real world calculation.

The required sample size ______ (round up to the nearest integer.

Answer:

The sample size is  [tex]n = 246[/tex]

Step-by-step explanation:

From the question we are told that

    The  mean is  [tex]\mu = 100[/tex]

     The  standard deviation is  [tex]\sigma = 24[/tex]

     The  margin of error is  [tex]E = 3[/tex]

Given that the confidence level  is  95% then the level of significance is mathematically evaluated as

         [tex]\alpha = 100 - 95[/tex]

         [tex]\alpha = 5\%[/tex]

=>        [tex]\alpha = 0.05[/tex]

Next we obtain the critical value of  [tex]\frac{ \alpha }{2}[/tex] from the normal distribution table the value is

            [tex]Z_{\frac{\alpha }{2} } = 1.96[/tex]

The sample size is evaluated as

          [tex]n = [ \frac{ Z_{\frac{\alpha }{2} } * \sigma }{E }]^2[/tex]

=>       [tex]n = [ \frac{ 1.96 * 24 }{3 }]^2[/tex]        

=>      [tex]n = 246[/tex]

to check if this n is applicable in real world then we calculate E and  compare it with the given E

●✴︎✴︎✴︎✴︎✴︎✴︎✴︎✴︎❀✴︎✴︎✴︎✴︎✴︎✴︎✴︎✴︎✴︎●

   Hi my lil bunny!

❧⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯☙

[tex]\frac{(17)(3.141593)}{12}[/tex]

= [tex]\frac{53.407075}{12}[/tex]

= [tex]4.45059[/tex]

❧⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯☙

●✴︎✴︎✴︎✴︎✴︎✴︎✴︎✴︎❀✴︎✴︎✴︎✴︎✴︎✴︎✴︎✴︎✴︎●

If this helped you, could you maybe give brainliest..?

Also Have a great day/night!

❀*May*❀

I have an answer and explanation but I can't type so search up the question you asked and you should get an answer and explanation from s0cratic.

Answer:

y-5=3(x+1)

Step-by-step explanation:

we use the point-slope formula to plug all of our values in.

[tex]y-y_{1}=m(x-x_{1})[/tex]

Answer:

[tex] {x}^{2} + 5x + 10[/tex]

Answer:

[tex]\large \boxed{x^2 +5x+10}[/tex]

Step-by-step explanation:

A polynomial is an expression that has variables, coefficients, and constants.

An example of a polynomial can be x² - 6x + 2.

Answer:

13.59%

Step-by-step explanation:

Calculate the z-scores.

z = (x − μ) / σ

z₁ = (450 − 400) / 50

z₁ = 1

z₂ = (500 − 400) / 50

z₂ = 2

Use a chart or calculator to find the probability.

P(1 < Z < 2)

= P(Z < 2) − P(Z < 1)

= 0.9772 − 0.8413

= 0.1359

Answer:

13.5

Step-by-step explanation:

Acellus sux

Answer:

.25 hour / dollar

Step-by-step explanation:

We want hours per dollar

9 hours/ 36 dollars

1/4 hour / dollar

Answer:

Yes, they make sense outside the context of temperature.

Step-by-step explanation:

If you are standing in a line, and mark your current position as 0 then if you take two steps ahead it can be counted as positive and if you take two steps back from your current position it can be counted as negative. The positive and negative can denote your forward and backward movement respectively.

If we denote the growth in companies revenue as positive and dip as negative then it would also make sense. A positive number would mean profit for the company while a negative sign would show loss.

Answer:

Sin A=0.6

Tan B = 1.3333

Cos C= 0.9231

Cos C= 0.3846

Step-by-step explanation:

For sin A

Sin A= opposite/hypotenuse

Sin A= 3/5

Sin A=0.6

For Tan B

Tan B = opposite/adjacent

Tan B = 4/3

Tan B = 1.3333

For cos C

Cos C = adjacent/hypotenuse

Cos C= 12/13

Cos C= 0.9231

For Cos D

Cos D= adjacent/hypotenuse

Cos C = 5/13

Cos C= 0.3846

Answer:

C, 39.3 in²

Step-by-step explanation:

Lets first find the area of the rectangle part of the house.

To find the area of a rectangle its base × height.

So its 6×4=24 in².

Now lets find the area of the top triangle.

Area for a triangle is (base × height)/2.

The height is 3 inches, because its 7-4. While the base is 6 inches.

(6×3)/2=9 in².

To find the area of the half circle the formula, (piR²)/2.

The radius of the circle is 2 because its half of the diamter which is 4.

(pi2²)/2=6.283 in².

Now we just need to add up the area of every part,

24+9+6.283=39.283in²

Answer:

  34.43

Step-by-step explanation:

A differential of length in terms of t will be ...

  dL(t) = √(x'(t)^2 +y'(t)^2)

where ...

  x'(t) = 4cos(4t)

  y'(t) = 7cos(7t)

The length of c(t) will be the integral of this differential on the interval [0, 2π].

Dividing that interval into 10 equal pieces means each one has a width of (2π)/10 = π/5. The midpoint of pieces numbered 1 to 10 will be ...

  (π/5)(n -1/2), so the area of the piece will be ...

  sub-interval area ≈ (π/5)·dL((π/5)(n -1/2))

It is convenient to let a spreadsheet or graphing calculator do the function evaluation and summing of areas.

__

The attachment shows the curve c(t) whose length we are estimating (red), and the differential length function (blue) we are integrating. We use the function p(n) to compute the midpoint of the sub-interval. The sum of sub-interval areas is shown as 34.43.

The length of the curve is estimated to be 34.43.

Answer:

0.25  decimal

1/4  decimal

Step-by-step explanation:

Answer:

We accept H₀  data from the survey is not enough to claim that 50% of the proportion indicated in previous studies have change

Step-by-step explanation:

To get conclusions about the survey we need to develop a hypothesis test of proportion

According to previous studies, (p₀ ) 50 % of staff and customers use public transportation, and we got from a survey 0f 1002 people 483 responded they also use then  p = 483/1002 then

n sample size is   1002  and  p = 0,482    (48,2 % )

Test Hypothesis

Null hypothesis                                   H₀            p  =  p₀

Alternative hypothesis                       Hₐ            p  <  p₀

CI =  95 %    α  = 5 %     α = 0,05    and from z-table we find z score for that value    z(c)  =  - 1,64

z(s)  =  (  p  -  p₀ ) /  √ (p₀*q₀)/ n         p₀ = q₀  = 0,5

z(s)  =  - 0,018* 31,65 / 0,5

z(s)  =  - 1,1394

To compare

z(s)  and  z(c)          -1,1394 > 1,64

Then z(s) is inside the acceptance region. We accept H₀ , because we don´t have enough evidence to claim that the survey results indicate a change in

the original proportion

Answer:

Step-by-step explanation:

One of the method of analysing the distribution of a dataset is by finding the mean of the dataset which is part of the measure of central of tendency.

Mean of a dataset is also known as the average and it is the ratio of the sum of the individual dataset to the sample size.

Mathematically xbar = ΣXi/N where

ΣXi is the sum of the individual dataset

N is the sample size

xbar is the mean

From the formula,  ΣXi = xbar * N

This means that the sum of the individual dataset (all values in the dataset) is equal to the product of the mean (xbar) and the sample size(N).

Hence the statement that In any sample data set, the sum of all the values is equal to the product of the mean and the sample size."is TRUE

Answer:

The slope is 1/8 and the y intercept is 3

Step-by-step explanation:

y = 1/8 x +3

This is in slope intercept form

y = mx+b where m is the slope and b is the y intercept

The slope is 1/8 and the y intercept is 3

Answer:

Step-by-step explanation:

When naming lines, you can use the label of the line, in this case, m, and can also name the points in either direction, since the line goes on forever in both directions (it's different with rays). The leaves only line B as an answer.

The vertex of XYZ would be Y, since the vertex is always the middle number.

Answer:

[tex]\boxed{\sf x = 9}[/tex]

Step-by-step explanation:

According to chord-chord theorem:

=> [tex]x* 2 = 3 * 6[/tex]

=> [tex]2x = 18[/tex]

Dividing both sides by 2

=> x = 18/2

=> x = 9

Answer:

sorry gave wrong answer

Step-by-step explanation:

Answer:

a. The H0 is number of correct guesses is 173

b. Standard Deviation of box is 0.3

c. z-test value is 7.70

d. The difference does not appear due to chances of Variation.

Step-by-step explanation:

The standard deviation is :

[tex]\sqrt{0.1 * 0.9}[/tex] = 0.3

The standard deviation of the box is 0.3 approximately.

Z-score is [tex]\frac{x-u}{standard error}[/tex]

Z-score = [tex]\frac{173-100}{9.4868}[/tex]

the value of z-score is 7.70.

Answer:

E(w) = 1600000

v(w) = 240000

Step-by-step explanation:

given data

sequence = 1 million iid  (+1 and +2)

probability of transmitting a +1 =  0.4

solution

sequence will be here as

P{Xi = k } = 0.4              for k = +1

                  0.6              for k = +2

and define is

x1  + x2 + ................ + X1000000

so for expected value for W

E(w) = E( x1  + x2 + ................ +  X1000000 )   ......................1

as per the linear probability of expectation

E(w) = 1000000 ( 0.4 × 1 + 0.6 × 2)

E(w) = 1600000

and

for variance of W

v(w) = V ( x1  + x2 + ................ + X1000000 )    ..........................2

v(w) = V x1  + V x2 + ................  + V  X1000000

here also same as that xi are i.e d so cov(xi, xj ) = 0 and i ≠ j

so

v(w) = 1000000 ( v(x) )

v(w) = 1000000 ( 0.24)

v(w) = 240000

Answer:

C

Step-by-step explanation:

From the graph we can notice that the yo-yo crosses five positions: A,B,C,D and E.

The path created by the yo-yo has a parabolic form.

● In the area C, the yoyo crosses the vertex in wich the rate of change equals 0.

●In A the parabola decreases dramatically

● In B, the parabola is decreasing but slower than A.

● In D, the parabola is increasing in a fast way

● In E, the parabola is increasing faster than D.

● In the first half of C, the parabola is decreasing slower than B and A.

● At the vertex, the parabola has a null rate of change.

● In the second half of C, the parabola is increasing but slower than D and E.

So we deduce that C has the slowest rate of change.

Answer:

The answer is C i took the test

Step-by-step explanation:

Answer:

seeed

Step-by-step] explanation:

ddd~!`

Nearest 1000: 5000

Nearest 100: 4600

Nearest 10: 4580

Hope that helped!!! k

------------------------------------------------------------------------------------------

Answer:

5/3

Step-by-step explanation:

on both sides we can see that the orginal length of 3 increased to five

therfore if we multiply 3 by 3/5 we get five which means the scale factor is 5/3

Answer:

Rate of Change : 8 / π

Step-by-step explanation:

To determine this rate of change, we have to first consider the points at x = 0 and x = π / 2.

When x = 0, f( x ) = - 4,

When x = π / 2, f( x ) = 0

Remember that rate of change is represented by a change in y / change in x. Therefore,

( 0 - ( - 4 ) ) / ( π / 2 - 0 ),

( 0 + 4 ) / ( π / 2 ),

4 / π / 2 = 8 / π

Therefore the rate of change from x = 0 ➡ x = π / 2 will be 8 / π.

Answer:

720

Step-by-step explanation:

It takes 240 cherries to make 3 pies.

9 pies are 3 times 3 pies, so it takes 3 times as many cherries.

3 * 240 cherries = 720 cherries.

[tex]\text{Find how many cherries is needed for 9 pies}\\\\\text{We know that there are 240 total cherries on 3 pies}\\\\\text{Now we need to find how many cherries will 9 pies need}\\\\\text{We simply have to multiply 240 by 3, since 3 multiplied by 3 is 9 pies}\\\text{So we would do the same with the cherries by multiplying it by 3}\\\\240\cdot3=720\\\\\boxed{\text{720 cherries}}[/tex]

Answer:

option C . 5

Step-by-step explanation:

For two points (x1,y1) and (x2,y2) divided by a point p in ratio m:n then coordinates of that point is given by

p    :  (nx1+mx2)/(m+n),  (ny1+my2)/(m+n),  

Given

x coordinate of P (-3)

x  coordinate of Q (a) since we have to find it , let it be a

x coordinate of R(-1)\

ratio = 1:3

_______________________________________

Using the above formula to find the point of division

we can get value of x coordinate for point Q

x  coordinate of R = 3*-3 + 1*a/(1+3)

-1 = (-9 + a)/4

=> -4 = -9 +a

=>a = -4+9 = 5

Thus, x  coordinate of Q is 5

Answer:

There is no sufficient evidence to support the claim that mean commuting time is more than 1.9 hours

Step-by-step explanation:

From the question we are told that

   The  population mean is  [tex]\mu = 1.9 \ hr[/tex]

   The  sample mean is  [tex]\= x = 2.2[/tex]

    The standard deviation is  [tex]\sigma = 0.7[/tex]

     The  sample size is  [tex]n = 14[/tex]

      The level of significance is  [tex]\alpha = 0.01[/tex]

The null hypothesis is  [tex]H_o : \mu = 1.9 \ hr[/tex]

The  alternative hypothesis is [tex]H_a : \mu > 1.9 \ hr[/tex]

 Generally the test statistics is mathematically represented as

               [tex]t = \frac{\= x - \mu }{ \frac{\sigma}{ \sqrt{n} } }[/tex]

              [tex]t = \frac{ 2.2 - 1.9 }{ \frac{0.7 }{ \sqrt{14} } }[/tex]

             [tex]t = 1.6036[/tex]

The  p-value is obtained from the z-table,  the value is  

           [tex]p-value = P(t > 1.6036) = 0.054401[/tex]

Looking at the value of  [tex]p-value \ and \ \alpha[/tex]  we see that  [tex]p-value > \alpha[/tex]

So we fail reject the null hypothesis

    Hence we can conclude that there is no sufficient evidence to support the claim that mean commuting time is more than 1.9 hours

Answer:

It is negative when s12 is smaller than s22.

Step-by-step explanation:

The F distribution has the following properties.

1)  It is always right-skewed.  but as the degrees of freedom v1 and v2 become large F distribution approaches normal distribution.

2) It describes the ratio of two variances.

3) It is a family based on two sets of degrees of freedom.

4) It is negative when s12 is smaller than s22. This is not  true sometimes as the F distribution does not depend on the population variance but on the two parameters v1 and v2.

Answer:

The sample size is 50 and population proportion under null hypothesis is 25%  ( A )   meets the requirement

Step-by-step explanation:

when applying the central limit theorem on sample proportions in one sample proportion test .The conditions needed to be satisfied are np > 10, and   n( 1-p ) > 10

A)  sample size ( n ) = 50

population proportion = 25%

np = 50 * 0.25 = 12.5 which is > 10 ( 1st condition met )

n( 1 - p ) = 50( 1 - 0.25 ) = 37.5 which is > 10 ( second condition met )

B ) sample size (n) = 70

population proportion = 90%

np = 70*0.9 = 63 which is > 10 ( 1st condition met )

n(1-p) = 70 ( 1 - 0.9 ) = 7 which is < 10 ( second condition not met )

C) sample size ( n ) = 50

population proportion = 15% = 0.15

np = 50 * 0.15 = 7.5 which is < 10 ( 1st condition not met )

n ( 1 - p ) = 50 ( 1 - 0.15 ) = 50 * 0.85 = 42.5 which is > 10 ( second condition met )

D) sample size ( n ) = 200

population proportion = 4% = 0.04

np = 200 * 0.04 = 8 which is < 10 ( 1st condition not met )

n ( 1 - p ) = 200 ( 1 - 0.04 ) = 192 which is > 10 ( second condition met )

hence : The sample size of 50 with population proportion under null hypothesis of 25%  meets the requirement