which system of units is used by only a small number of countries in the world, including the u.s

I am 95 percent sure the answer in C

Answer: C

Explanation:

Answer:

Explanation:

true true fauls true fauls fauls

1 . The higher the frequency, the closer the waves are together and the LOWER the energy carried by the waves will be. FALSE

2. The greater the force that produces a wave, the greater the amplitude of the wave and the greater the energy carried by the wave. TRUE

3. In a transverse wave the higher the wave, the LOWER the amplitude FALSE

4.Wavelength is a measure of the distance from the crest on one wave to the crest on the very next wave, TRUE
5. Speed is a measure of the distance a wave travels in an amount of time TRUE

6. As a wave enters a different medium, the wave’s speed changes. Waves travel at different speeds in different media TRUE

7. The highest point of a transverse wave is the crest and the lowest point is called a trough. TRUE

A wave is a disturbance in a medium that carries energy and  as well as momentum. Energy can be transferred in the form of wave in the medium. there are two types of wave,

longitudinal wave : in which, vibration of the medium (particle) is parallel to propagation of the wave as shown in the fig.1. Sound wave is a longitudinal wave.

Transverse wave : in which, vibration of the medium (particle) is perpendicular to propagation of the wave as shown in the fig.2. Light wave is a longitudinal wave.

1. E = hυ where υ is a frequency which shows direct relation between Energy E and frequency υ. Hence it is false.

2. True

3. In a transverse wave the higher the crest in the wave, the higher the amplitude. FALSE

4. True

5. True, Speed = Distance÷Time

6. due to change in refractive index, velocity changes TRUE

7.True

To know more about wave, click :

https://brainly.com/question/3639648

#SPJ3

Answer:

Potential energy does not have an absolute measurement. It is always relative to some reference point. Gravitational potential always increases when you go up and decreases when you go down. But the choice of a zero point is arbitrary.

If you’re dropping objects onto the ground, then choosing the ground as a zero point makes the calculations easier. But you could just as easily make the zero point the top of Mt. Everest, and all the answers would turn out the same. Up still means more energy and down means less, but now the PE of an object at sea level would have a negative sign, but not as negative as an object ten meters above sea level.

So everything would still work fine.

In fact, planetary astronomers take this idea to extremes. Instead of the top of Mt. Everest, they set the zero point for potential energy as infinitely high—so far “up” that gravity is so weak that going “up” another kilometer doesn’t gain you any energy. Then the value for potential energy everywhere else in the universe anywhere near a planet has a negative sign, but just as before, all the answers in relative terms turn out fine.

Explanation:

PLEASE MARK ME AS BRAINLIEST

Answer:

Earth's rotation and orbit and the Moon's orbit cause observable patterns (Day and night, seasons, phases of the Moon, tides).

Answer:

Why sex cells only need half the number of chromosomes compared to other cells in the body?  As gametes are produced, the number of chromosomes must be reduced by half. Why? The zygote must contain genetic information from the mother and from the father, so the gametes must contain half of the chromosomes found in normal body cells.

Explanation:

Brainliest Plzz

Answer:

During Mitosis, the chromosomes split at G2 Phase.

Answer:

Generally, when thermal energy is transferred to a material, the motion of its particles speeds up and its temperature increases. There are three methods of thermal energy transfer: conduction, convection, and radiation. ... Convection transfers thermal energy through the movement of fluids or gases in circulation cells.

Explanation:

Answer:

Why do you think transferring energy into or out of a substance can change the molecules’ freedom of movement?

Explanation:

We know that transferring energy can cause a change in molecules' freedom of movement. Another way to say this is that transferring energy into or out of a substance can cause a phase change.

Answer:

Object's final momentum = 16.7 kg-m/s

Explanation:

Given that,

Impulse, J = 12.2 kg-m/s

Initial momentum, [tex]P_i=4.5\ kg-m/s[/tex]

We need to find the object's final momentum. We know that the impulse is equal to the change in momentum. So,

Impulse = change in momentum

[tex]J=P_f-P_i\\\\P_f=J+P_i\\\\P_f=12.2+4.5\\\\P_f=16.7\ kg-m/s[/tex]

So, the object's final momentum is 16.7 kg-m/s.

Given:

We know the relation,

→ [tex]Impulse = Change \ in \ momentum[/tex]

or,

→ [tex]J = P_f-P_i[/tex]

then,

→ [tex]P_f = J+P_i[/tex]

By substituting the values,

        [tex]= 12.2+4.5[/tex]

        [tex]= 16.7 \ kg-m/s[/tex]

Thus the above answer is right.      

Learn more about momentum here:

https://brainly.com/question/18551770

Answer:

  2 m/s

Explanation:

The crest of the wave moves 8 meters in 4 seconds, so its speed is ...

  (8 m)/(4 s) = 2 m/s

Answer:

2 m/s is the answer .

Explanation:

Answer:

300 J

Explanation:

From conservation of energy;

Gravitational potential energy at top = Kinetic Energy at bottom

mgh = ½mv²

We are given;

Mass; m = 12 kg.

Height; h = 2.5 m

g = 10 m/s²

Thus;

mgh = 12 × 2.5 × 10 = 300 J

Since mgh = Kinetic Energy at bottom.

Thus; kinetic energy of the ball once it reach the ground = 300 J

Answer:

The final equilibrium temperature of the tin-water mixture is approximately 18.468 °C

Explanation:

The parameters of heat energy transfer from the tin to the water are given as follows;

The mass of the sample of tin, m₁ = 0.225 kg

The initial temperature of the tin, T₁ = 97.5 °C

The mass of the water into which the tin is dropped, m₂ = 0.115 kg

The initial temperature of the water, T₂ = 10.0 °C

The specific heat capacity of tin, c₁ = 230 J/(kg·°C)

The specific heat capacity of water, c₂ = 4,200 J/(kg·°C)

Let 'T' represent the final equilibrium temperature of the tin-water mixture, we have;

The heat lost by the tin, ΔQ[tex]_{tin}[/tex] = The heat gained by the water ΔQ[tex]_{water}[/tex]

∴  ΔQ[tex]_{tin}[/tex] = ΔQ[tex]_{water}[/tex]

Where;

ΔQ[tex]_{tin}[/tex] = m₁·c₁·(T₁ - T)

ΔQ[tex]_{water}[/tex] = m₂·c₂·(T - T₂)

By substitution, we have;

ΔQ[tex]_{tin}[/tex] = 0.225 kg × 230 J/(kg·°C) × (97.5°C - T)

ΔQ[tex]_{water}[/tex] = 0.115 kg × 4,200 J/(kg·°C) × (T - 10.0°C)

From ΔQ[tex]_{tin}[/tex] = ΔQ[tex]_{water}[/tex], we have;

0.225 kg × 230 J/(kg·°C) × (97.5°C - T) = 0.115 kg × 4,200 J/(kg·°C) × (T - 10.0°C)

∴ 5,045.625 J - 51.75 J/°C × T = 483 J/°C × T - 4,830 J

5,045.625 J + 4,830 J = 534.75 J/°C × T

∴ 534.75 J/°C × T = 9,875.625 J

T =  9,875.625 J/(534.75 J/°C) = 18.4677419 °C ≈ 18.468 °C

The final equilibrium temperature of the tin-water mixture, T ≈ 18.468 °C.

Answer:

4 N

Explanation:

mass = 2 kg

acceleration = 2 m/s^2

Force = mass * acceleration

         = 2 *2

         = 4 N

Answer:

d

Explanation:

Answer:

D: wire

Explanation:

Answer:

2.22m/s^2

Explanation:

Answer:

F = ma or force is equal to mass times acceleration.

Explanation:

Answer:

Natural

Explanation:

Answer:

It's a Natural System

Explanation:

When the Solar System was formed Human didn't even exist. the planets clashed and a lot of changes happened to create earth and different planets.

Answer:

a computer modeling

Explanation:

Answer:

306 m/s

Explanation:

Law of conservation of momentum

m1v1 + m2v2 = (m1+m2)vf

m1 is the bullet's mass so it is 0.1 kg

v1 is what we're trying to solve

m2 is the target's mass so it is 5.0 kg

v2 is the targets velocity, and since it was stationary, its velocity is zero

vf is the velocity after the target is struck by the bullet, so it is 6.0 m/s

plugging in, we get

(0.1 kg)(v1) + (5.0 kg)(0 m/s) = (0.1 kg + 5.0 kg)(6.0 m/s)

(0.1)(v1) + 0 = 30.6

(0.1)(v1) = 30.6

v1 = 306 m/s

The initial velocity of the bullet can be determined from the total momentum of the system. The velocity of the bullet was 306 m/s.

Momentum of a body is the product of its mass and velocity. For a collision, the momentum before and after collision will be the same for the colliding system.

Let m1 and m2 be the masses and u be the initial velocity and v is the final velocity.

then,  m1 u1  + m2 u2 = m1 v1  + m2 v2.

Given m1 = 5 kg

m2 =  0.1 kg

The velocity of the combined mass v = 6 m/s.

The momentum of the target is zero since it was stationary.

(0.1 × u1) = (0.1 + 5)6 m/s

(0.1 × u1) = 30.6 m/s

then u1 = 30.6/0.1 = 306 m/s

Therefore, the velocity of the bullet before hitting was 306 m/s.

Find more on momentum:

https://brainly.com/question/29113044

#SPJ2

Answer:

Image result for Why does the Moon appear red during a lunar eclipse?

A lunar eclipse takes place when the sun, Earth and moon line up in space. The moon passes through Earth's shadow. ... Bottom line: The moon can look red during a total lunar eclipse because of sunlight that's filtered and refracted by Earth's atmosphere

Answer:

Kinetic energy

Explanation:

The energy associated with an object's motion is called kinetic energy. A speeding bullet, a walking person, and electromagnetic radiation like light all have kinetic energy.

Kinetic energy. For example, a walking person.

Answer:

frequency = 0.5 /s

speed = 2m/s

Explanation:

frequency = 1/period = 1/2 = 0.5 /s

speed = frequency × wavelength

= 0.5 × 4 = 2m/s

Answer:

the 750 j will have potential energy is 375

Explanation:

750/2 is 375

The standard equations of the parabolas are listed below:

In this question we have four case of parabolas with vertical axes of reference, whose standard formula is:

[tex]y - k = \frac{1}{4\cdot p}\cdot (x-h)^{2}[/tex]     (1)

Where:

Please notice that p < 0 when the directrix is above the focus, otherwise p < 0. The vertex is the midpoint of line segment between the directrix and the focus.

Now we proceed to derive the standard equations of the parabola:

1) Vertex:

(h, k) = 0.5 · (- 6, 4) + 0.5 · (- 6, - 3)

(h, k) = (- 6, 0.5)

Least distance:

p = - 3.5

y + 6 = - (1/14) · (x + 6)²

2) Vertex:

(h, k) = 0.5 · (0, - 4) + 0.5 · (0, - 5)

(h, k) = (0, - 4.5)

Least distance:

p = 0.5

y = (1/2) · (x + 4.5)²

3) Vertex:

(h, k) = 0.5 · (2, 3) + 0.5 · (2, 7)

(h, k) = (2, 5)

Least distance:

p = 2

y - 5 = - (1/8) · (x - 2)²

4) Vertex:

(h, k) = 0.5 · (- 2, - 6) + 0.5 · (- 2, - 4)

(h, k) = (- 2, - 5)

Least distance:

p = 1

y + 5 = (1/4) · (x + 2)²

To learn more on parabolas: https://brainly.com/question/4074088

#SPJ1

Answer:

hola

Explanation:

jffkbjkcvncncjcncjcjchchchcjcjcjcjcjckgmndjekbm hdfstfm mvndbfncn bdhwhgmvmch

Answer:

P = 928.09 Pa

Explanation:

Given that,

Mass of a gas cylinder, m = 90 kg

The diameter of the cylinder, d = 1.1 m

Radius, r = 0.55 m

We need to find the ground pressure. The pressure is equal to force per unit area. So,

[tex]P=\dfrac{F}{A}\\\\P=\dfrac{mg}{\pi r^2}\ (A\ is\ area\ of\ base)\\\\P=\dfrac{90\times 9.8}{\pi \times (0.55)^2}\\\\P=928.09\ Pa[/tex]

So, the ground pressure is 928.09 Pa.

The standard form of the given exponential function is 120000.

By putting the number as a base and the number of repetitions as a little number to its upper right, a representation of repeated multiplications of the same number is known as an exponential form.

It is simpler to write repeated multiplication using base and exponents in the exponential form.

The equation f(x) = aˣ, in which the input variable x appears as an exponent and a as the base, describes an exponential function.

So, the given exponential function is,

1.2 x 10⁵

Here, 10 is the base and 5 is the exponent.

10⁵ = 100000

Therefore, the standard form of the given equation is,

1.2 x 100000 = 120000

To learn more about exponential function, click:

https://brainly.com/question/29166310

#SPJ6