Answer:
B) increasing the number of turns in the
Explanation:
A) Increasing the space between the turns in the coil will decrease the number of coils. It will result in a decrease in the strength of the magnetic field because the strength of the magnetic field of an electromagnet is directly proportional to the number of coils.
B) Increasing the no. of turns in the coil will result in an increase in the strength of the magnetic field.
C) Strength of magnetic field is directly proportional to the magnitude of current passing through the electromagnet. Therefore, decreasing the current will decrease the strength of the magnetic field.
D) Decreasing the voltage will decrease the current and as a result, the strength of the magnetic field will also be decreased.
Hence, the correct option is:
B) increasing the number of turns in the
The average mass of an adult American female is 75 kilograms. What is the weight of
the average female in pounds?
Answer:
with 75kg --> 165.35 pound(lb)
Explanation:
[tex] \frac{75}{0.45359237} [/tex]
What formula should I use?
- Find the velocity of a wave in the ocean if the wavelength is 2.0m and the frequency is 0.56Hz.
Please please help
Define and describe the following terms: amplitude, wavelength, frequency, period, tension.
Answer:
Amplitude—distance between the resting position and the maximum displacement of the wave
Frequency—number of waves passing by a specific point per second
Period—time it takes for one wave cycle to complete
wavelength λ - the distance between adjacent identical parts of a wave, parallel to the direction of propagation.
Tension - described as the pulling force transmitted axially by the means of a string, a cable, chain, or similar one-dimensional continuous object, or by each end of a rod, truss member, or similar three-dimensional object
A 74.2 kg teenager slides down a frictionless slide that has an angle of inclination of 38˚. What is the magnitude of the acceleration of the teenager down the slide?
Answer:
Explanation:
This is one-dimensional motion on an incline which makes it so much more funner :/
The equation for this is
w*sinθ - f = ma which is just a fancy version of Newton's second law that says that the sum of the forces acting on an object are equal to that object's mass times its acceleration.
w is the weight of the teen which is also the normal force, [tex]F_n[/tex]. Therefore,
[tex]w=F_n=mg[/tex] where m is mass and g is gravity:
[tex]w=F_n=(74.2)(9.8)[/tex] and we need 2 sig figs for this since there are 2 in 9.8:
w = 730N
Since there is no friction in this problem, the value for f, frictional force, is 0, making our job a bit shorter. Filling in the main equation:
730sin38 - 0 = 74.2a
Since the left side is subtraction and we will eventually have to divide, and the rules for subtraction/addition are different from those for multiplication/division, we will have to subtract first, get the correct number of sig figs for that difference, and then divide, following the rules for division.
730sin38 will have 2 sig figs which is 450. Now
450 - 0 = 74.2a and
450 = 74.2a and divide to 2 sig figs:
a = 6.1 m/s/s
The force of gravity between you and Earth is greater than the force of gravity between you and a car because Earth has more __________ than the car.
Answer:Earth has more mass than the car.
in the question
Our entire ______ _____
is built in the backbone of metals.
Answer:
modern world
Explanation:
If a body is thrown up with an initial velocity 'u' and covers a maximum height of 'h' , then 'h' is equal to u²/2g
Explain in detail.
Answer:
1/2 m u^2 initial Kinetic Energy of body
m g h Potential Energy body attains as it rises to height
1/2 m u^2 = m g h conversion of KE to PE
h = u^2 / ( 2 g)
who is the first physicist and what did he invented?
Answer:
hippocrates
I guess..........
What is the acceleration of a 250 kg object pushed with a force of 7500 newtons?
Answer:
a = 30 m/s²
Explanation:
Given: 250 kg, 7500N
To find: Acceleration (a)
Solution: To find the acceleration (A), divide the force by the weight
A = F ÷ m
= 7500 ÷ 250
= 30 m/s²
Newtons are derived units, equal to 1 kg-m/s². In other words, a single Newton is equal to the force needed to accelerate one kilogram one meter per second squared.
In 1993, the gold reserves in the United States were about 8.490 × 106
kg. If all
that gold were made into a thick wire with a cross-sectional area of 1cm2
, its
total resistance would be about 6.60 × 102 Ω. If the same operation were
applied to the gold reserves of Germany, France, and Switzerland, the
resistances would be 2.40 × 102 Ω, 2.00 × 102 Ω, and 2.00 × 102 Ω,
respectively. Now consider all four resistors connected as shown in the circuit
diagram below. Find the equivalent resistance.
The equivalent resistance of the circuit is 65.98 Ω.
What is Resistor?
A resistor is an electrical component that limits or regulates the flow of electrical current in a circuit. It is designed to provide a specific amount of resistance to the flow of electrons, measured in ohms, and is typically made of a material that can resist the flow of electricity, such as carbon or metal. Resistors are used in a wide range of electronic devices and circuits, from simple LED flashers to complex computer systems.
To find the equivalent resistance of the circuit, we need to use the formula for resistors in parallel:
1/Req = 1/R1 + 1/R2 + 1/R3 + 1/R4
where Req is the equivalent resistance, and R1, R2, R3, and R4 are the resistances of the four resistors.
Substituting the given values, we get:
1/Req = 1/6.60 × 102 + 1/2.40 × 102 + 1/2.00 × 102 + 1/2.00 × 102
1/Req = 0.01515
Req = 65.98 Ω
Therefore, the equivalent resistance of the circuit is 65.98 Ω.
Learn more about Resistor from given link
https://brainly.com/question/17563681
#SPJ1
John often sees squiggly lines when he looks at a bright sky or white paper. His doctor says that they are called eye floaters, which are small bits of protein in the fluid that fills the eyeball.
In what part of the eye are eye floaters found?
a) cornea
b) vitreous humor
c) retina
d) convex lens
Answer- It's B, i double checked it on a few websites
The vitreous humor is the eye is eye floaters.
What is vitreous humor?The vitreous body (vitreous meaning "glass-like"; from Latin vitreus 'glassy', from vitrum 'glass', and -eus) is the clear gel that fills the space between the lens and the retina of the eyeball (the vitreous chamber) in humans and other vertebrates. It is often referred to as the vitreous humor (also spelled humour, from Latin meaning liquid) or simply "the vitreous". Vitreous fluid or "liquid vitreous" is the liquid component of the vitreous gel, found after a vitreous detachment. It is not to be confused with the aqueous humor, the other fluid in the eye that is found between the cornea and lens.
StructureThe vitreous humor is a transparent, colorless, gelatinous mass that fills the space in the eye between the lens and the retina. It is surrounded by a layer of collagen called the vitreous membrane (or hyaloid membrane or vitreous cortex) separating it from the rest of the eye. It makes up four-fifths of the volume of the eyeball.The vitreous humour is fluid-like near the centre, and gel-like near the edges.
Learn more about vitreous humor
https://brainly.com/question/14266481
#SPJ2
How is it possible a plant can sustain itself for 70 years locked inside a jar ?
Answer:
If you are talking about the experiment in which mouse and plants are kept in a closed glass jar in sunlight so in that case, they both survive because the CO2 released by the respiration of mouse is being utilized by the plants and fixed ( phosynthesis) and O2 is released as by product, which is taken by the mouse for respiration.
2. Give at least 2 major roles of mining in our lives.
Answer:
Mined materials are needed to construct roads and hospitals, to build automobiles and houses, to make computers and satellites, to generate electricity, and to provide the many other goods and services that consumers enjoy.
Explanation:
Use Newton's second law of motion and a free-body diagram to...
1. ...calculate the normal force acting upon a 50-kg passenger who accelerates upward at a rate of 3.0 m/s/s.
2. ...calculate the normal force acting upon a 50-kg passenger who accelerates downward at a rate of 3.0 m/s/s.
Please don't put any links or I will report you.
An electromagnet is a device that uses an electric current to produce a magnetic field.
Electromagnets are typically composed of a piece of metal wrapped with wire and connected to a battery. The battery provides the electric current, and the loops or coils of wire enhance the magnetic field. The more loops there are, the stronger the magnetic field.
When electric current flows through the electromagnet, the metal core becomes magnetized, so it possesses a north pole and a south pole.
Motors place electromagnets inside of permanent magnets as shown below.
However, motors are designed so that the polarity of the electromagnet constantly flips. That is, the north pole becomes the south pole, and the south pole becomes the north pole, every time the electromagnet turns 180 degrees.
Why is it designed this way?
A.
to conserve the energy in the battery
B.
to constantly polarize the field magnet
C.
so the electromagnet will continuously turn
D.
so the magnetic field will get stronger
The reason why motors are designed so that the polarity of the electromagnet constantly flips.is
C. so the electromagnet will continuously turn
Why is motor designed that wayThe reason motors are designed so that the polarity of the electromagnet constantly flips is to continuously turn the electromagnet. This allows the motor to rotate continuously, rather than becoming stuck in one position.
The flipping of the polarity causes the electromagnet to attract and repel from the permanent magnets, creating a rotating motion.
Therefore, the correct answer is C.
Learn more about motors at:
https://brainly.com/question/18619348
#SPJ1
A step down transformer has a primary coil consisting of 700 tons and a secondary coil consisting of 300 times. What is the potential difference in the second circuit, if the primary coil is supplied with an effective AC potential difference of 110 V?
Answer is 47.14 v
by the relation
[tex]\frac{V out}{V in } = \frac{N secondary}{N primary }[/tex]
The three things to remember about gravitational forces in space are: 1. 2. 3.
Answer:
(1) The gravitational forces are inversely proportional to the square of the distance between the objects. More is the distance between the objects , less will be the gravitational force between them.
(2) The gravitational forces are the weakest of all the four fundamental forces (Nuclear forces, weak forces, electromagnetic forces, gravitational forces) in nature.
(3)Gravitational forces are always attractive . They are also conservative in nature. work done by these forces or against these forces doesn't depend on the path followed.
Explanation:
help.....please science
Answer:
please mark me brainliest
Explanation:
ohm
The SI-derived unit of electric resistance is the ohm, which is defined as a volt per ampere.
Answer:
I cant see that
1.-Una fuerza horizontal de 40 N es apenas suficiente para poner en marcha un trineo de 600 N sobre nieve compacta. Después de empezar el movimiento se requieren tan solo 10 N para mantener el trineo a rapidez constante. Halle los coeficientes de fricción estática y cinética
Answer:
Los coeficientes de fricción estática y cinética son [tex]\frac{1}{15}[/tex] y [tex]\frac{1}{60}[/tex], respectivamente.
Explanation:
Por la Primera Ley de Newton, sabemos que la fuerza externa debe tener igual magnitud y dirección contraria a la fuerza de reacción (fricción). Puesto que el trineo se mueve sobre una superficie horizontal, la magnitud de la fuerza normal es la del peso ([tex]W[/tex]), en newtons. El coeficiente de fricción estática ([tex]\mu_{s}[/tex]), sin unidad, es la razón de la fuerza de fricción justo antes del movimiento inminente ([tex]F[/tex]), en newtons, a la fuerza normal ([tex]N[/tex]), en newtons:
[tex]\mu_{s} = \frac{F}{W}[/tex] (1)
Si sabemos que [tex]F = 40\,N[/tex] y [tex]W = 600\,N[/tex], entonces el coeficiente de fricción estática es:
[tex]\mu_{s} = \frac{F}{W}[/tex]
[tex]\mu_{s} = \frac{40\,N}{600\,N}[/tex]
[tex]\mu_{s} = \frac{1}{15}[/tex]
El coeficiente de fricción cinética ([tex]\mu_{k}[/tex]), sin unidad, es la razón de la fuerza de fricción experimentada por el trineo en movimiento ([tex]F[/tex]), en newtons, a la fuerza normal:
[tex]\mu_{k} = \frac{F}{W}[/tex] (2)
Si sabemos que [tex]F = 10\,N[/tex] y [tex]W = 600\,N[/tex], entonces el coeficiente de fricción cinética es:
[tex]\mu_{k} = \frac{F}{W}[/tex]
[tex]\mu_{k} = \frac{10\,N}{600\,N}[/tex]
[tex]\mu_{k} = \frac{1}{60}[/tex]
Los coeficientes de fricción estática y cinética son [tex]\frac{1}{15}[/tex] y [tex]\frac{1}{60}[/tex], respectivamente.
A 0.140 kg baseball is thrown with a velocity of 28. m/s It is struck with an average force of 5000.0 N,which results in a velocity of 37.0 m/s in the opposite direction. How long were the bat and ball in contact?
Check the images.. it has a few different questions and answers! Hope it helps
How does the motion of the molecules change when you increase the temperature
Answer:
They speed up as temperature increases.
Explanation:
As temperatures increases within a molecule the particles will speed up.
True or False. The Magnitude of the induced voltage in a coil of wire depends on how quickly the magnetic flux through the coil of wire changes.
Answer:
Yes, its true
Explanation:
hdheheishdhieijzuwhs
Answer: yes its true
Explanation:
nmo
The inventor of the electric cell was:
O Coulomb
Franklin
o Gilbert
O Volta
Answer:
The inventor of the electric cell was:
Alessandro Volta (in other words, Volta)
Explanation:
Answer:
Volta
Hope this helped you!!
Brainliest plsss
Explanation:
Alessandro Volta, in full Conte Alessandro Giuseppe Antonio Anastasio Volta, (born February 18, 1745, Como, Lombardy [Italy]—died March 5, 1827, Como), Italian physicist whose invention of the electric battery provided the first source of continuous current
If you're the white mouse, what will you do in order for you to survive
Answer:
If I was the white mouse, I would either find somewhere to hide that matches my fur color to camoflouge with or dig into the dirt so less visible.
To find white colour habitat.
What will I do for my survival?If I was the white mouse, I would find white colour place for living because in that white colour the predators can't see me and i will be safe from them so we can conclude that finding white colour habitat is the best choice to safe myself.
Learn more about survive here: https://brainly.com/question/24323334
Why does the golf ball sink in
water, while the beach ball
floats?
A- The beach ball weighs less than
the golf ball
B- The golf ball has a higher density
than the beach ball
C- The beach ball has a higher
density than the golf ball
D- The golf ball has more mass than
the beach ball
Which of these statements explains why we have day and night? [1] The Earth orbits the Sun once a day The Sun orbits the Earth once a day. The Sun spins on its axis once a day. The Earth spins on its axis once a day.
Answer:
The Earth spins on its axis once a day.
Explanation:
In simple words,The Earth revolves on its axis once every 24 hours and circles the sun once every 365 days. The Earth's rotation on its axis, not its orbit throughout the sun causes day as well as night. The word 'one day' refers to the period it requires the Earth to spin entirely on its axis, which involves both day as well as night.
A stereo speaker is made of a flexible cone-shaped material that vibrates, creating a sound wave. A sound wave formed be a speaker travels through air to your ear as a series of compressions and rarefactions of air molecules.
Which statement classifies the sound wave?
transverse wave in which the particles of the wave move in a direction parallel to the wave motion
longitudinal wave in which the particles of the wave move in a direction parallel to the wave motion
transverse wave in which the particles of the wave move in a direction perpendicular to the wave motion
O longitudinal wave in which the particles of the wave move in a direction perpendicular to the wave motion
Answer: longitudinal wave in which the particles of the wave move in a direction parallel to the wave motion
The sound wave is a longitudinal wave in which the particles of the wave move in a direction parallel to the wave motion.
What is a wave of sound?A sound wave can be described as the pattern of distribution caused by the movement of energy that is traveling through a medium, such as air, water, or any liquid or solid matter, etc, as it is traveling away from the source of the sound. There are two types of sound waves:
Longitudinal wave: When the particles of the medium move in a direction parallel to the direction that the wave moves then the wave is known as the longitudinal wave.
Transverse Wave: When the particles of the medium move in a direction perpendicular to the direction that the wave moves then the wave are known as the transverse wave.
As it is given that the sound wave formed by the speaker travels through the air to your ear as a series of compressions and rarefactions of air molecules, therefore, the particles of the medium move in a direction parallel to the direction that the wave.
Hence, the sound wave is a longitudinal wave in which the particles of the wave move in a direction parallel to the wave motion.
Learn more about Sound Wave:
https://brainly.com/question/11797560
Which beach balls have potential energy and not kinetic energy?
Answer:
Beach ball 4
Explanation:
it is because, Potential Energy = M G H
P(e) directly proportional to H.
if H increase then P energy also increases
A specified volume of space contains an electric field for which the magnitude is given by E=E0cos(ωt). Suppose that E0 = 20 V/m and ω = 1.0 × 107 s−1. What is the maximum displacement current through a 0.40 m2 cross-sectional area of this volume?
Answer: [tex]0.708\ mA[/tex]
Explanation:
Given
[tex]E_o=20\ V/m[/tex]
[tex]\omega =10^7\ s^{-1}[/tex]
Cross-sectional area [tex]A=0.40\ m^2[/tex]
Current density is given by
[tex]J=\epsilon_o \dfrac{dE}{dt}[/tex]
Displacement current
[tex]\Rightarrow I=JA\\\Rightarrow I=8.854\times 10^{-12}\times 20\times 10^7\times 0.4\\\Rightarrow I=0.708\times 10^{-3}\ A[/tex]
The required value of the maximum displacement current of the given space is [tex]7.08 \times 10^{-4} \;\rm A[/tex].
Given data:
The intensity of electric field is, [tex]E_{0}=20 \;\rm V/m[/tex].
The angular frequency of electric field is, [tex]\omega=1.0 \times 10^{7} \;\rm s^{-1}[/tex].
The cross-sectional area of space is, [tex]A =0.40 \;\rm m^{2}[/tex].
In the given problem, the instantaneous electric field is given by [tex]E = E_{0} \times cos(\omega t)[/tex]
So, the expression for the current density is,
[tex]J= \epsilon_{0} \times \dfrac{dE}{dt}[/tex]
Here, [tex]\epsilon_{0}[/tex] is the permittivity of free space. Solving as,
[tex]J= \epsilon_{0} \times \dfrac{d(E_{0} \times cos(\omega t))}{dt}\\\\J= -\epsilon_{0} \times E_{0} \times \omega \times sin(\omega t)[/tex]
And the expression for the maximum displacement current is,
[tex]I = J \times A[/tex]
And the maximum displacement current is possible only when, J is positive and J will be positive for [tex]sin(\omega t)=-1[/tex].
Then solving as,
[tex]I = (-\epsilon_{0} \times E_{0} \times \omega \times sin(\omega t)) \times A\\\\I = (-8.85 \times 10^{-12} \times 20 \times (1.0 \times 10^{7}) \times (-1)) \times 0.40\\\\I = 7.08 \times 10^{-4} \;\rm A[/tex]
Thus, we can conclude that the required value of the maximum displacement current of the given space is [tex]7.08 \times 10^{-4} \;\rm A[/tex].
Learn more about the displacement current here:
https://brainly.com/question/20344850
