Answer:
acceleration = - 150 m/s^2
distance = 9 miles.
Explanation:
initial speed, u = 60 mph
time, t = 12minutes = 0.2 hour
final speed, v = 30 mph
Let the acceleration is a and the distance is s.
By the first equation of motion
v = u + at
30 = 60 + a x 0.2
a = - 150 m/s^2
Let the distance is s.
Use third equation of motion is
[tex]v^2 = u^2 + 2 a s \\\\30^2 = 60^2 + 2 \times 150\times s\\\\s = 9 miles[/tex]
A completely inelastic collision occurs between two balls of wet putty that move directly toward each other along a vertical axis. Just before the collision, one ball, of mass 3.0 kg, is moving upward at 22 m/s and the other ball, of mass 1.3 kg, is moving downward at 11 m/s. How high do the combined two balls of putty rise above the collision point
Answer:
The height balls rise above the collision point, is approximately 7.37 meters
Explanation:
The given parameters just before the collision are;
The mass, m₁ and velocity, v₁ of the ball moving upward are;
m₁ = 3.0 kg, v₁ = 22 m/s
The mass, m₂ and velocity, v₂ of the ball moving downward are;
m₂ = 1.3 kg, v₂ = -11 m/s (downward motion)
The type of collision = Inelastic collision
We note that the momentum is conserved for inelastic collision
Let, [tex]v_f[/tex], represent the final velocity of the balls after collision, we have;
∴ Total initial momentum = Total final momentum
m₁·v₁ + m₂·v₂ = (m₁ + m₂)·[tex]v_f[/tex]
Therefore, we get;
m₁·v₁ + m₂·v₂ = 3.0 kg × 22 m/s + 1.3 kg × (-11) m/s = 51.7 kg·m/s
(m₁ + m₂)·[tex]v_f[/tex] = (3.0 kg + 1.3 kg) ×
∴ 51.7 kg·m/s = 4.3 kg × [tex]v_f[/tex]
[tex]v_f[/tex] = (51.7 kg·m/s)/4.3 kg ≈ 12.023 m/s
The final velocity, [tex]v_f[/tex] ≈ 12.023 m/s
The maximum height, h, the combined balls will rise from the point of collision, moving upward at a velocity of [tex]v_f[/tex] ≈ 12.023 m/s, is given from the kinetic equation of motion, v² = u² - 2·g·h, as found follows
At maximum height, we have;
[tex]h_{max} = \dfrac{v_f^2}{2 \cdot g }[/tex]
Therefore;
[tex]h_{max} \approx \dfrac{12.023^2}{2 \times 9.81 } \approx 7.37[/tex]
The height the combined two balls of putty rise above the collision point, [tex]h_{max}[/tex] ≈ 7.37 m.
Why does An apple, potato, and onion all taste the same if you eat them with your nose plugged
Un móvil recorre una trayectoria en línea recta de 6000 metros y demora 30 minutos. ¿Cuál es su rapidez expresada en Km/h?
Answer:
La rapidez del móvil es 12 kilómetros por hora.
Explanation:
Asumamos que el móvil experimenta un movimiento rectilíneo uniforme, cuya ecuación cinemática es la siguiente:
[tex]v = \frac{x}{t}[/tex] (1)
Where:
[tex]x[/tex] - Distancia recorrida, en kilómetros.
[tex]t[/tex] - Tiempo, en horas.
[tex]v[/tex] - Rapidez, en kilómetros por hora.
Si tenemos que [tex]x = 6000\,m[/tex] y [tex]t = 30\,min[/tex], entonces la rapidez del móvil es:
[tex]v = \frac{6000\,m\times \frac{1}{1000}\,\frac{km}{m}}{30\,min \times \frac{1}{60}\,\frac{h}{min} }[/tex]
[tex]v = 12\,\frac{km}{h}[/tex]
La rapidez del móvil es 12 kilómetros por hora.
Principles What are the advantages of total reflecting prism over plane mirror?
Answer:
There is no significant energy loss in the total internal reflection and the reflected ray has entire light wave energy so that a brighter image is formed, but some energy in the plane mirror is absorbed inside and thus energy loss.
Explanation:
Advantages
If the light is reflected from the total prism, the entire light is completely reflected internally. But only about 90% of the incident light is reflected from the mirror of the plane. Consequently, reflected light intensity is more in the prism than light reflected in the plane mirror. There are no more reflections in the prism as in the plane mirror in its entirety. In the case of a total prism as in the plane mirror, the image is not reversed laterally. It requires no silvering, one of the benefits.How does sound travel?
A car travelling at 10ms ,acceleration uniformly at 2ms what will be its velocity after 5s?
[tex]we \: know \: that \\ acceleration = \frac{(final \: velocity - initial \: velocity)}{time} \\ = > a = \frac{(v - u)}{t} \\ = > 2m {s}^{ - 2} = \frac{{(v - 10m {s}^{ - 1} })}{5s} \\ = > 2m {s}^{ - 2} \times 5s = v - 10m {s}^{ - 1} \\ = > 10m {s}^{ - 1} = v - 10m {s}^{ - 1} \\ = > 10m {s}^{ - 1} + 10m {s}^{ - 1} = v \\ = > 20m {s}^{ - 1} = v \\ = > 20m {s}^{ - 1} = initial \: velocity[/tex]
Hope it helps!!
Thanks!!
Answer:
20 ms
Explanation:
You know
acceleration=2ms initial Velocity=10ms Time=5s
We are finding Final V
Use the equation Final v = (a x t) + initial v
2 x 5 = 10
10 + 10 = 20
Atoms can create fields to interact with each other without touching.
True
or
False
Answer:
True
Explanation:
True, atoms create electromagnetic fields that form repulsion to keep them from touching.
what is the efficiency of an engine that dies 288 J of work and exhausts 72 J of heat while taking 360 J of heat?
Answer:
80%
Explanation:
Energy Input: 360 J
Energy Output: 288 J
e= 288/360 × 100
e= 80%
Alternatively,
e= W(total)/ Q (in)
e= 288/360
e=0.8×100
e=80%
Two objects, one with a mass of and the other with a force of 30.0kg experience a gravitational force of attraction of 7.50 * 10^- 8 N how far apart are centers of mass?
Answer:
Explanation:
The formula for this is
[tex]F_g=\frac{Gm_1m_2}{r^2}[/tex] where F is the gravitational force, G is the gravitational constant, m1 is the mass of one object and m2 is the mass of the other object. We are looking for r, the distance between the centers of their masses.
Filling in:
[tex]7.5*10^{-8}=\frac{6.67*10^{-11}(90.0)(30.0)}{r^2}[/tex] and moving things around to solve for r:
[tex]r=\sqrt{\frac{6.67*10^{-11}(90.0)(30.0)}{7.5*10^{-8}} }[/tex] Doing all that and rounding to the 3 sig fig's you need gives us a distance of 1.55 m
The ability of a metal to react with air and water is a
property.
O chemical, physical, respectively
O physical, chemical, respectively
o physical, physical, respectively
O chemical, chemical, respectively
[tex]\bold{{Answer}}[/tex]
O physical, chemical, respectively
please buddy correct me if im wrong
The ability of a metal to react with air and water is a chemical, chemical, respectively property
What is a chemical change?A chemical change occur when the substance's composition is changed or when bonds are broken and new ones are forms a chemical change occur .
When a metal burn in air or react with air it form metal oxide and when metal react with water it forms oxides or hydroxides and release hydrogen gas . In both the cases change in composition is taking place . hence , bot are chemical reactions
correct answer is O chemical, chemical, respectively
learn more about chemical change
https://brainly.com/question/23693316?referrer=searchResults
#SPJ3
Na + Cl2 → 2NaCl
The equation is
because the number of
atoms is
on both sides of the arrow.
Answer:
what do u want to ask ????
in parallel combination of electrical appliances Total Electric Power a. increase b. decrease c. remain same
Answer:
In a parallel combination of electrical appliances total electric power will increase
Answer is A it will increase
The moon's mass is____
a 1.18 x 1011 kg
b 7.35 x 1022 kg
С 5.32 x 10kg
d 3.20 x 1018 kg
Answer:
7.35kg
Explanation:
Hope this is helpful :)
If sensed fuel in the Piper Archer reaches ____ gallons in either tank, the yellow Low Fuel caution light will illuminate on the MFD for the corresponding side
Answer:
10 litres.
Explanation:
The air fuel ratio for aircraft is 12:1. It is due to simplicity piper archer is equipped with continuous flow injection system. There is a fuel sensing is Piper Archer which informs the pilot about the low fuel when the fuel level reaches to as low as 10 litres only in the tank. The yellow low furl light will illuminate to alert the pilot.
The four laws of liquid pressure
Answer:
1-The liquid pressure is same at all points lying on the same horizontal plane in a stationary liquid.
2-The liquid pressure at a point inside the liquid is same in all directions.
3-The liquid pressure at a point inside the liquid is directly proportional to the depth of that point from the free surface of liquid.
4-The pressure of liquid at same depth is different for different liquids. It is directly proportional to density of liquid. That is, for same depth the liquid pressure is larger for liquid of larger density.
Explanation:
To overcome the problems that blur images and don't provide the best resolution from Earth, astronomers have started using flexible mirrors that change shape many times each second. This technique is called:
Answer:
adaptive optics
Explanation:
simple
Calculate the distance travelled by the car in part Q use the equation distance travelled= average speed x time
Explanation:
distance travelled = average speed x time
=30m/s*100s
=3000m
Answer:
3000m
Explanation:
30m/s*100s
3000m
Which of the following is NOT TRUE about food irradiation?
O It is practiced around the world.
O It leaves food mildly radioactive.
It is effective in killing microorganisms.
o It destroys microorganisms without cooking.
Answer:
It is practiced around the world .
The statement, that is, food irradiation leaves food mildly radioactive is not true.
• A technology, which uses ionizing radiation to improve safety and extend the shelf life of foods by eliminating and reducing insects and microbes is known as food irradiation.
• Irradiation is used in canning fruits and vegetables and pasteurizing milk to make food safer for consumption.
• Irradiation does not compromise nutritional quality, makes food radioactive, or change the texture, text, or appearance of food. The effect of irradiation is so minimal that it is not easy to identify that whether the food is irradiated.
• Food irradiation has been approved in over forty countries and is almost practiced globally.
Thus, the statement, that is, it leaves food mildly radioactive is incorrect.
To know more about:
https://brainly.com/question/19586033
what is physical change ?
Answer:
Physical Changes :- The substance in which no new substance is formed are called physical changes.
The molecular composition of the substance are totally same.
For example :- Crushing a mineral into powder.
A 1.25cm diameter cylinder is subjected to a load of 2500kg.Calculate the stress on the bar in mega pascal
Answer:200 Mpa
Explanation:
Given that diameter of cylinder = d = 1-25cm = 1.25 100 =0.0125m
Load or mass = m = Stress 0 = ? 2500kg
Solution: Formula N = F A
Area of Cross-section of cylinder = A=πr2 A = π(d/2) 2
= π(d2/4)
=(3.14)(0.0125)2/4
A = 1.226x10-4
F ・ mg = = F A 24500 2500 x 9.8 = 24500 N
1-226x10-4
1998 36 867.9
= 200 x 106 Pa
= 200 MPa
*Hope it helps you*
Good luck
How did the current change when the circuit was initially closed in Part 2 of this exercise? Explain your answer by referencing Panel 1 and the definitions of a capacitor and of current.
Answer:
Some current is lost.
Explanation:
Change occur in the current when the circuit was initially closed because in a closed circuit the current moves from the start towards the end of the circuit through various resistors. There is heat produced in the wire when the current flows through the circuit. Due to this heat, some of the current is lost during on his own way. Capacitor is a device used to store an electric charge, having of one or more pairs of conductors separated by an insulator. while on the other hand, electric current is a stream of charged particles, such as electrons moving through conductor or space.
how much of the electro magnetic spectrum is visible to us
Answer:
The entire rainbow of radiation observable to the human eye only makes up a tiny portion of the electromagnetic spectrum – about 0.0035 percent. This range of wavelengths is known as visible light.
Explanation:
Please Mark me brainliest
A scientist that applies the laws of science to the needs of communities is called _____.
the experimental scientist
the engineer
the teacher
the technician
Answer:
The experimental scientist
As compared with lower kVp exposures, when using high kVp will result in a scattered photon that is of ________ energy. Group of answer choices
Answer:
Increased
Explanation:
kVp is an acronym for kilovoltage peak, and it determines the strength x-ray beam strength, and the quality of the beam, it is a measure of the highest that the x-ray machine produces. A 60 kVp x-ray will produce photons with a maximum energy of 60 kilovolts while a 70 kVp will produce photons having 70 kilovolts as the maximum energy
Therefore, a high kVp exposure will result in scattered photon that is of increased energy compared with a lower kVp exposure.
The amount of solar radiation received by Earth from the sun, known as _______________________, is greatest when the sun is directly overhead a location. (Answer must be correctly spelled and is case sensitive).
The amount of solar radiation received by Earth from the sun, known as insolation, is greatest when the sun is directly overhead a location.
The amount of solar radiation received by Earth from the sun is known as insolation, solar insolation is greatest when the sun is directly overhead a location.
What is solar energy?The energy transferred from the Sun in the form of electromagnetic radiation is known as the solar energy
It can be used as thermal energy for various life purposes as well as for electricity conversion with the help of solar photovoltaic cells
The ratio of total electrical energy generated by a solar photovoltaic panel to its total thermal energy is known as solar energy efficiency. The solar panel's area and design have an impact on how energy-efficient it is.
Thus, the term "insolation" refers to the amount of solar radiation that Earth receives from the sun. Solar insolation is highest when the sun is directly overhead a location.
Learn more about solar energy from here, refer to the link;
brainly.com/question/9704099
#SPJ2
Which of the following is defined as a force that pushes and pulls the current through the circuit? Group of answer choices D) resistance B) electricity A) current C) voltage
Answer:
C voltage
Explanation:
Voltage is the change in electric potential so basically current flows from high potential to low potential due to voltage.
12. Which of these is more dense?
A. 10kg of a block of wood
B. 1kg of a block of styrofoam
C. 1kg of feathers
D. 10kg of feathers
E. 10kg of stryfoam
F. 1 kg of wood
Answer:
answer is E
Explanation:
What is the enthalpy change, AH, for this reaction? Show your work to receive full credit. URGENT PICTURE INCLUDED !!!
Answer:
150 kJ
Explanation:
Applying,
ΔH = Energy level of Product(E') - Energy level of reactant(E)
Where ΔH = enthalpy change, E' and E = energy level of the product and the reactant respectively
ΔH = E'-E............. Equation 1
From the diagram,
Given: E' = 200 kJ, E = 50 kJ
Substitute these values into equation 1
ΔH = 200-50
ΔH = 150 kJ
Hence the enthalpy change for the reaction is 150 kJ
A small car increases its speed from 10 m/s to 15 m/s. Its mass is 1,200 kg. What is the impulse?
A. 6,000 kg-m/s
B. 18,000 kg-m/s
C. 12,000 kg.m/s
D. 1,200 kg-m/s
Answer:
A
Explanation:
We know that impulse(J) is the force times the change in time OR mass times the change in velocity. Because we're given mass and a final and initial velocity, we'll use the second option written as:
mΔv=J
Since Δ means change in, and Δv= vf-vi, we subtract 10 m/s from 15 m/s to get 5 m/s for Δv.
Now plugging in Δv and m(1,200 kg)
1,200 kg * 5 m/s =J
6000 kg* m/s = J
the bodies in this universe attract one another name the scientist who propounded this statement
Answer: The scientist named Isaac Newton proposed this universal law of gravitation.
It is given that the bodies in this universe attract one another.
It is required to name the scientist who propounded this statement.
What is the name of the scientist who propounded this statement?According to Newton's law of gravitation, every object in the universe attracts every other object with a force that is proportional to the multiplication of the masses and inversely proportional to the square of the distance between the objects. This is the universal law that means this is a constant term that can't be changed with respect to place which was proposed by Isaac Newton in 1687.
Therefore, Isaac Newton proposed this universal law of gravitation.
Learn more about gravitation here:
https://brainly.com/question/12528243
#SPJ5
