Answer:
Functions of an operating system. An operating system provides three essential capabilities: It offers a UI through a CLI or GUI; it launches and manages the application execution; and it identifies and exposes system hardware resources to those applications -- typically, through a standardized API.
Explanation:
Which of the following are advantages of a local area network, as opposed to a wide area network? Select 3 options.
provides access to more networks
higher speeds
more secure
lower cost
greater geographic reach
Answer:
✅ more secure
✅ lower cost
✅ higher speeds
Explanation:
Edge 2022
What is indirect program memory addressing? Explain the working of the following instructions?
a) JMP AX
b) JMP LIST[DX]
c) JMP NEAR PTR[DI+3]
The instructions operate as follows:
a)
JMP AX :
The JMP instruction is being used to execute an unconditional jump.AX is indeed the label's name. JMP AX codes are being used to transfer control of the flow program to the AX label.b)
JMP LIST:
The JMP command can be used to execute an unconditional jump, JMP LIST[DX] is the label's name. The JMP LIST[DX] program is being used to transfer control of its flow programs to the specified section. It is the segment to which the flow control is transmitted.c)
JMP NEAR PTR[DI+3]:
Unconditional jumps could be done with the JMP command as you'll see, the label is JMP NEAR PTR[DI+3]. It's being used to transmit flow control to a particular section, throughout this case [DI+3]. The close keyword indicates that perhaps the code segment would be in the line of code being nearby.Learn more:
brainly.com/question/20320915
Which Windows installation method requires that you manually rename computers after the installation?
Answer:
Command line
Explanation:
After installation of the machine one needs to manually rename the computer. This can be done through the start then settings, then system, and select rename the PC in the right-hand side column.The slope and intercept pair you found in Question 1.15 should be very similar to the values that you found in Question 1.7. Why were we able to minimize RMSE to find the same slope and intercept from the previous formulas? Write your answer here, replacing this text.
Differentiate between email and NIPOST System
Answer: NIPOST System is sending mail physical like photos and letters and many items
Email is electronic mail sent through the internet but you can send it anywhere
Explanation:
What’s cloud-based LinkedIn automation?
Answer:
Cloud based LinkedIn automation includes tools and software that run through the cloud-system and are not detectable by LinkedIn. Cloud based LinkedIn automation tools are becoming the favorite among B2B marketers and sales professionals as they are giving the desired outcomes without any effort.
By Using the following schema, answer the following SQL queries and commands: Product(P_code.P_name, P_price, P_on_hand,vend_code) Vender(vend_code, vend_fname, vend_areacode, vend_phone) 1- find the venders names who sell products in TN-5 area and their names include "dan". 2- find the code, name and vender code of product that has price between 1500S and 2500S and the product that has price between 48005 and 5600S. 3- Find the name, and code of venders who had 5 microwaves that has price less than 3500S. 4- Find the phone numbers of venders who sell Televisions. 5- Delete the records of venders who their first name is 'smith'
Explanation:
answer me pls i need sol bbbd
DESCRIBE THE GENERAL STRATEGY BEHIND DEALOCK PREVENTION AND GIVE A PRATICAL EXAMPLE
Answer:
........
Explanation:..........
While troubleshooting an Internet connection problem for your network, you restarted the modem and then the router. The router is now communicating with the Internet, which you can confirm by observing the blinking light on the router's WAN indicator. However, now your laptop is not communicating with the router. Order the commands below to fix the problem and confirm connectivity.
a. ping
b. ipconfig /renew
c. nslookup microsoft.com
d. ipconfig /release
Answer:
d. ipconfig /release
b. ipconfig /renew
a. ping
c. nslookup microsoft.com
Explanation:
A router can be defined as a network device that is designed typically for forwarding data packets between two or more networks based on a well-defined routing protocol.
Basically, it is an electrical device or node that is designed to connect two (2) different networks (in different locations) together and allows them to communicate.
Generally, routers are configured using a standard routing protocol with an IP address as the default gateway.
Dynamic Host Configuration Protocol (DHCP) is a standard protocol that assigns IP address to users automatically from the DHCP server.
Basically, a DHCP server is designed to automatically assign internet protocol (IP) address to network devices connected to its network using a preconfigured DHCP pool and port number 67.
On a related note, when a computer that is configured with DHCP cannot communicate or obtain an IP address from the DHCP server, the Windows operating system (OS) of the computer automatically assigns an IP address of 169.254.33.16, which typically limits the computer to only communicate within its network.
I. ipconfig /release
II.. ipconfig /renew
III. ping
IV. nslookup microsoft.com
5. Which events is used to code on any form load
a) Form Text b) Form Code c) Form Load d) Form Data
Answer:
I think b is correct answer
Argue whether we can infer anything about a candidate’s ability to work in a professional environment based on his or her resume’s formatting.
Compare how you would address a resume with wacky fonts to how you would respond to grammatical errors in a resume.
Answer:
when dressing feaded back is postive and then list areas of inprovmenr to met the job requirements
Explanation:
Describe two types of storage devices?
Answer:
Central Process Unit and Random Access Memory
Write equivalent predicate statement for Every teacher who is also a painter loves Bob
Answer:
Every teacher who is also a painter loves Bob
10. Which property is used to show the form in maximize state
a) Selection State b) Window State c) Mode d) Opening State
Answer:
windows state
Explanation:
the answer is windows state.
when was first generation of computer invented?
Which one is the result of the ouWhen you move a file to the Recycle Bin, it will be immediately deleted from your computer.
A. True
B. Fals
Answer:
B => false
Explanation:
it just keep it on recycle bin => not being removed
Cryptarithmetic algorithm
Answer:
CryptArithmetic or verbal arithmetic is a class of mathematical puzzles in which the digits are replaced by letters of the alphabet or other symbols. Usually it is required that each letter would be replaced by a unique digit. Each letter having different value from the other letters.
Explanation:
Cryptarithm now denotes mathematical problems usually calling for addition, subtraction, multiplication, or division and replacement of the digits by letters of the alphabet or some other symbols. ... Since D × B has only one digit, B must be 3 or less. The only two possibilities are 0 and 2.
In the home tab under the paragraph group of options what are you unable to do?
how did hitles rules in nazi germany exemplify totiltarian rule?
Answer:
hope this helps if not srry
hi, please help me, please help me.
Code Example 4-1 int limit = 0; for (int i = 10; i >= limit; i -= 2) { for (int j = i; j <= 1; ++j) { cout << "In inner for loop" << endl; } cout << "In outer for loop" << endl; } (Refer to Code Example 4-1.) How many times does "In inner for loop" print to the console? a. 1 b. 0 c. 2 d. 5 e. 7
Answer:
"In inner for loop" is printed twice.
Answer: C. 2
Explanation:
Code:
int main()
{
int limit = 0;
for (int i =0; i>=limit; i-=2) {
for (int j = i; j <= 1; ++j){
cout << "In inner for loop" << endl;
}
cout << "In outer for loop" << endl;
}
return 0;
}
Output:
In inner for loop
In inner for loop
In outer for loop
The output "In inner for loop" print twice.
Thus, option (c) is correct.
In the given code example, the inner for loop has a condition j <= 1.
This condition means that the loop will execute as long as j is less than or equal to 1.
However, the initial value of j is i, and the value of i decreases by 2 in each iteration of the outer for loop.
When i = 8, the inner loop has the condition j ≤ 1.
The loop will iterate as long as j is less than or equal to 1.
So the inner loop executes twice: once when j = 8, and then when j = 9. The statement "In inner for loop" prints twice.
Therefore, the output print twice.
Thus, option (c) is correct.
Learn more about Output problem here:
https://brainly.com/question/33184382
#SPJ4
The analog computer deals directly with
continuously variable aspects of physical phenomena such as a electrical, mechanical etc.
The analog computer deals directly with measured values of continuous physical magnitude.
What is an Analog computer?An analog computer may be defined as a type of computer that is significantly used to process analog data. These computers store data as a continuum of physical quantities and perform calculations using measurements.
It is completely different from digital computers, which use symbolic numbers to represent results. are great for situations that require data to be measured directly without conversion to numbers or codes. Analog computers, although readily available and used in scientific and industrial applications such as control systems and aircraft, have largely been superseded by digital computers due to the many complications involved.
Therefore, the analog computer deals directly with measured values of continuous physical magnitude.
To learn more about Analog computers, refer to the link:
https://brainly.com/question/18943642
#SPJ2
Your question seems incomplete. The most probable complete question is as follows:
The analog computer deals directly with:
number or codes.measured values of continuous physical magnitude.signals in the form of 0 or 1.signals in discrete values from 0 to 9What are computer programs that make it easy to use and benefit from techniques and to faithfully follow the guidelines of the overall development methodology
Answer:
A Tool
Explanation:
Tools are computer programs that make it simple to use and benefit from techniques while adhering to the overall development methodology's guidelines. The correct option is A).
What are computer programs?A computer-aided software development case tool is a piece of software that aids in the design and development of information systems. It can be used to document a database structure and provide invaluable assistance in maintaining design consistency.
A computer software application is one that is developed to assist a particular organizational function or process, such as payroll systems, market analysis, and inventory control.
The goal of introducing case tools is to reduce the time and cost of software development, while also improving the quality of the systems created.
Therefore, the correct option is A) Tools.
To learn more about computer programs, refer to the below link:
https://brainly.com/question/9963733
#SPJ2
The question is incomplete. Your most probably complete question is given below:
A) Tools
B) Techniques
C) Data flow
D) Methodologies
mk chưa hiểu nên các bạn giúp mk vs
Answer:
my tab and state it all over my name to
Which is not a MARKETING impact of technology?
Social
Cultural
Economic
Environmental
Answer:
the answer is environmental
The Lisp function LENGTH counts the number of elements in the top level of a list. Write a function ALL-LENGTH of one argument that counts the number of atoms that occur in a list at all levels. Thus, the following lists will have the following ALL-LENGTHs.
(A B C) => 3
((A (B C) D (E F)) => 6
(NIL NIL (NIL NIL) NIL ) => 5
Answer:
bc
Explanation:
Scenarios are quite common where an IT professional is tasked with modify a file on many computer systems or many files on a single computer or a combination of the two. For example, a large software may need the copyright notice comment to be changed on every source file in the project. Or, a configuration file may need to be modified on every server in a multi-server deployment. Doing this task manually is not a viable way to approach the problem. Instead, a better solution is to use a scriptable environment to perform search and replace functionality on the files in question. Python is an excellent tool for this kind of task.
Description
Samba is a unix/linux file sharing suite of programs designed to provide Windows interoperable file and print sharing services. Much of the configuration for the Samba daemon is provided by the text file smb.conf (renamed to smb.txt for this assignment). After an update was deployed to three dozen linux servers it was discovered that a couple of configured parameters were incorrect. Unfortunately, since there are unique aspects to each server, copying the contents of a single file to each server is not a viable solution. To fix the problem, the IT department must connect to each server, edit the smb.conf file, and restart the smbd daemon. To automate this task, each server will have a Python script copied to it. Then an SSH session will be initiated to each server from which the script will be executed. Your task is to write the Python script.
The invocation of the script must be as follows:
python modify.py fileSpec "from" "to"
where,
modify.py is the name of your script
fileSpec is the name of the file to be modified (smb.txt)
"from" is the text to be searched for (be sure to enclose any white space in quotes.
"to" is the text the searched text is to be replaced with.
Testing the script is your responsibility. However a good test case is:
python modify.py smb.txt "password sync = yes" "password sync = no"
Answer:
Explanation:/
The example Python script that can be used to automate the modification of the smb.conf file on multiple Linux servers is shown below
What is the code?python
import subprocess
import sys
def modify_smb_conf(file_spec, search_text, replace_text):
try:
# Open the file for reading
with open(file_spec, 'r') as file:
# Read the contents of the file
file_contents = file.read()
# Perform the search and replace operation
modified_contents = file_contents.replace(search_text, replace_text)
# Open the file for writing
with open(file_spec, 'w') as file:
# Write the modified contents back to the file
file.write(modified_contents)
# Print a success message
print(f"Modification successful: Replaced '{search_text}' with '{replace_text}' in {file_spec}")
except IOError as e:
# Print an error message if there was an issue with file operations
print(f"Error: {e}")
def main():
# Check if the correct number of command line arguments are provided
if len(sys.argv) != 4:
print("Usage: python modify.py fileSpec \"from\" \"to\"")
return
# Extract the command line arguments
file_spec = sys.argv[1]
search_text = sys.argv[2]
replace_text = sys.argv[3]
# Call the function to modify the smb.conf file
modify_smb_conf(file_spec, search_text, replace_text)
if __name__ == '__main__':
main()
Read more about code here:
https://brainly.com/question/29330362
#SPJ2
Write a program that asks the user to enter in a username and then examines that username to make sure it complies with the rules above. Here's a sample running of the program - note that you want to keep prompting the user until they supply you with a valid username:
user_in = input ("Please enter your username: " )
if user_in in "0123456789":
print ("Username cannot contain numbers")
elif user_in in "?":
print ("Username cannot continue special character")
else:
print (" Welcome to your ghetto, {0}! ".format(user_in))
what is the main difference between a computer program and computer software
Answer:
Think of computer software sort of as DNA, because DNA is the human body's computer software. And a computer program is like an activity your body does.
Explanation:
Sorry if this didn't help.
write a C++ program that receives a number as input from the user ,and checks whether it is greater than 8 and less than 10 or not and print the result
num_in = float (input = ("Please enter a number from 0 to ten: "))
def cmp_num(num_in):
try:
if num_in > 8 and num_in < 10:
print ("{0} is greater than 8 and less than 10".format(num_in) )
elif num_in < 8 and num_in < 10:
print (" {0} is less than 8 and less than 10".format(num_in) )
else:
print ("{0} is out of the restriction".format (num_in))
except ValueError:
print ("Invalid input")
