Without actually calculating any logarithms, determine which of the following intervals the sound intensity level of a sound with intensity 3.66×10^−4W/m^2 falls within?

a. 30 and 40
b. 40 and 50
c. 50 and 60
d. 60 and 70
e. 70 and 80
f. 80 and 90
g. 90 and 100

Answers

Answer 1

Answer:

f. 80 and 90

Explanation:

1 x 10⁻¹² W/m² sound intensity falls within 0 sound level

1 x 10⁻¹¹ W/m² sound intensity falls within 10 sound level

1 x 10⁻¹⁰ W/m² sound intensity falls within 20 sound level

1 x 10⁻⁹ W/m² sound intensity falls within 30 sound level

1 x 10⁻⁸ W/m² sound intensity falls within 40 sound level

1 x 10⁻⁷ W/m² sound intensity falls within 50 sound level

1 x 10⁻⁶ W/m² sound intensity falls within 60 sound level

1 x 10⁻⁵ W/m² sound intensity falls within 70 sound level

1 x 10⁻⁴ W/m² sound intensity falls within 80 sound level

1 x 10⁻³ W/m² sound intensity falls within 90 sound level

Given sound intensity (3.66 x 10⁻⁴ W/m²) falls with 1 x 10⁻⁴ W/m² of intensity which is within 80 and 90 sound level.

f. 80 and 90


Related Questions

A dentist uses a concave mirror (focal length 2 cm) to examine some teeth. If the distance from the object to the mirror is 1 cm, what is the magnification of the tooth

Answers

Answer:   2

Explanation:

1/2=1/1 +1/x

x=-2

magnification= 2/1

magnification=2

PLEASE ANSWER ASAP
What happens to the ocean water before the precipitation part of the water cycle? ANSWERS; A.The ocean water condenses into the clouds. B.The ocean water collects back in the ocean. C.The ocean water falls back to Earth's surface. D. The ocean water runs off Earth's surface.

Answers

Answer:

B.

Explanation:

The water collects in the ocean; it is then evaporated by the sun. After evaporation the water turns into water vapor, it then condenses to form clouds.

The ocean water prior to the part of the water cycle should be option B.

Ocean water:

The ocean water should be collected back in the ocean prior to the part of the water cycle.

Because this should be done when it is evaporated by the sun.  When the evaporation is done so the water should be transformed into water vapor.

Find out more information about the  Water here:brainly.com/question/4381433?referrer=searchResults

A cyclist moves effortlessly at a constant speed of 12 m / s, but enters a muddy area where the coefficient of kinetic friction is 0.60. Will the rider leave the muddy area without having to pedal if the mud extends 11m? If so, how fast will it emerge?

Answers

Answer:

3.5 m/s

Explanation:

There are 3 forces on the cyclist:

Weight force mg pulling down,

Normal force N pushing up,

and friction force Nμ pushing left.

Sum of forces in the y direction:

∑F = ma

N − mg = 0

N = mg

∑F = ma

-Nμ = ma

-mgμ = ma

a = -gμ

a = -(10 m/s²)(0.60)

a = -6 m/s²

Velocity reached at end of 11 m:

v² = v₀² + 2aΔx

v² = (12 m/s)² + 2 (-6 m/s²) (11 m)

v = √12 m/s

v ≈ 3.5 m/s

6)the speed of light is approximately​ 186,000 mi/sec. It takes light from a particular star approximately 9 yrs to reach Earth. How many miles away is the star from​ Earth? Express the answer in scientific notation. Use 365 days in 1 year. The star is nothing miles away from Earth.

Answers

Answer:

5.2791264*10¹³

Explanation:

Convert the 9 years to seconds and then multiple it by 186000

The star is 4.62 x 10¹⁶ miles away from Earth.

The speed of light is 186,000 miles per second. It takes light from a particular star approximately 9 years to reach Earth. There are 365 days in 1 year, so it takes 9 x 365 = 3285 days for light from the star to reach Earth.

The distance between the star and Earth is 3285 x 186,000 = 608,810,000 miles. In scientific notation, this is 4.62 x 10¹⁶ miles.

Here is the calculation:

distance = speed * time

distance = 186,000 miles/second * 3285 days * 24 hours/day * 60 minutes/hour * 60 seconds/minute

distance = 608,810,000 miles

distance = 4.62 x 10¹⁶ miles

To know more about the Light, here

https://brainly.com/question/20296439

#SPJ2

You want to create a spotlight that will shine a bright beam of light with all of the light rays parallel to each other. You have a large concave spherical mirror and a small lightbulb. Where should you place the lightbulb?

a. at the point, because all rays bouncing off the mirror will be parallel.
b. at the focal point of the mirror
c. at the radius of curvature of the mirror
d. none of the above, you cant make parallel rays wilth a concave mirror

Answers

Answer:

Explanation:

Concave mirrors is otherwise known as converging mirrors: These are mirrors that are caved inwards (reflecting surface is on the outside curved part). It is called a converging mirror due to the fact that light converges to a point when it strikes and reflects from the surface of the mirror. This type of mirror is used to focus light; parallel rays that are directed towards it will be concentrated to a point.

For a concave mirror to reflect light with properties that are the same as a spotlight (directed light rays parallel to each other), one has to consider its property to gather light to a point after reflecting. Meaning that, we can achieve the spotlight by locatng the point where the rays will be parallel, this point is called the focal point.

Therefore, the light bulb should be placed at the focal point of the mirror.

In an inertia balance, a body supported against gravity executes simple harmonic oscillations in a horizontal plane under the action of a set of springs. If a 1.00-kg body vibrates at 1.00 Hz, a 2.00-kg body will vibrate at Group of answer choices

Answers

Answer;

a 2.00-kg body will vibrate at 0.707Hz

Answer:-7.9

Explanation:

If two firecrackers produce a sound level of 81 dBdB when fired simultaneously at a certain place, what will be the sound level if only one is exploded?

Answers

Answer:

77.96dB

Explanation:

Recall that decibels are a unit of measuring intensity of sound, and depend on the logarithm of the intensity

the intensity, measured in decibels is given by:

I(db)=10log(I/I0)

I is the intensity in MKS units; I0 is the threshold intensity for human hearing (10^-12 W/m^2)

Thus, if the two sounds together have a dB of 81, we know:

81=10log(I/I0)

using the data above, we can find the intensity of the two sounds to be

0.000125 W/m^2

therefore, one firecracker has an intensity half of that, or 0.0000625W/m^2

now use this value to find the dB of one firecracker:

I(dB0=10log(0.0000625/10^-12)=77.96dB

An ac source of period T and maximum voltage V is connected to a single unknown ideal element that is either a resistor, and inductor, or a capacitor. At time t = 0 the voltage is zero and increasing toward a maximum. At time t = T/4 the current in the unknown element is equal to zero, and at time t = T/2 the current is I = -I max, where Imax is the current amplitude. What is the unknown element?
a. a resistor
b. an inductor or a capacitor
c. an inductor
d. a capacitor

Answers

The answer is d.a capacitor

Sunlight strikes a piece of crown glass at an angle of incidence of 37.4o. Calculate the difference in the angle of refraction between a red (660 nm) and a blue (470 nm) ray within the glass. The index of refraction is n

Answers

Answer:

The difference in angle of refraction between the red and blue light is 0.2°

Explanation:

Here is the complete question

Sunlight strikes a piece of crown glass at an angle of incidence of 37.4°. Calculate the difference in the angle of refraction between a red (660 nm) and a blue (470 nm) ray within the glass. The index of refraction is n=1.520 for red and n=1.531 for blue light.

Solution

From Snell's law refractive index n = sini/sinr where i = angle of incidence and r = angle of refraction.

Now for the red light n₁ = 1.520, i = 37.4° and r₁ = angle of refraction of red light

So, n₁ = sini/sinr₁

n₁sinr₁ = sini

sinr₁ = sini/n₁

r₁ = sin⁻¹(sini/n₁) = sin⁻¹(sin37.4°/1.52) = sin⁻¹(0.6074/1.52) = sin⁻¹(0.3996) = 23.55°

Now for the blue light n₂ = 1.531, i = 37.4° and r₂ = angle of refraction of blue light

So, n₂ = sini/sinr₂

n₂sinr₂ = sini

sinr₂ = sini/n₂

r₂ = sin⁻¹(sini/n₂) = sin⁻¹(sin37.4°/1.531) = sin⁻¹(0.6074/1.531) = sin⁻¹(0.3967) = 23.37°

So the difference in angle of refraction between the red and blue light is r₁ - r₂ = 23.55° - 23.37° = 0.18° ≅ 0.2°

Describe how you expect the waveform and the sound you hear changes when you hit the tuning fork harder.

Answers

Answer:

In a tuning fork, two basic qualities of sound are considered, they are

1) The pitch of the waveform: This pitch depends on the frequency of the wave generated by hitting the tuning fork.

2) The loudness of the waveform: This loudness depends on the intensity of the wave generated by hitting the tuning fork.

Hitting the tuning fork harder will make it vibrate faster, increasing the number of vibrations per second. The number of vibration per second is proportional to the frequency, so hitting the tuning fork harder increase the frequency. From the explanation on the frequency above, we can say that by increasing the frequency the pitch of the tuning fork also increases.

Also, hitting the tuning fork harder also increases the intensity of the wave generated, since the fork now vibrates faster. This increases the loudness of the tuning fork.

A small wave pulse and a large wave pulse approach each other on a string; the large pulse is moving to the right.
Sometime after the pulses have met and passed each other, which of the following statements is correct? (More than one answer may be correct)
- the large pulse continues moving to the right
- the large pulse continues unchanged, moving to the right
- the small pulse is reflected and moves off to the right with a smaller amplitude
- the small pulse is reflected and moves off to the right with its original amplitude
- the two pulses combine into a single pulse moving to the right

Answers

Answer:

the large amplitude wave keeps moving to the right

the small amplitude wave continues to move to the left.

When checking the answers, the correct ones are 1, 2

Explanation:

The waves fulfill the principle of superposition, which states that the value of the function at a point is the algebraic sum of the waves at a given instant.

The two waves in this exercise travel in the opposite direction, so when they are close, the resulting wave is the sum of the two waves, having a complicated shape. But when the waves follow their movement, they give in the same way as the initial a,

the large amplitude wave keeps moving to the right

the small amplitude wave continues to move to the left.

When checking the answers, the correct ones are 1, 2

Define the following, and give the letter which we will abbreviate them by:
Center of curvature:
Vertex:
Focal Point:
Radius of curvature:
Focal length:

Answers

Answer:

As in explanation.

Explanation:

A) Centre of Curvature: This is defined as the point in the center of the sphere from which the mirror was sliced. It is represented by the letter "C"

B) Vertex: It is defined as the point on the mirror's surface where the principal axis meets the mirror. It is represented by the letter A.

C) Focal Point: This is defined as the Midway point between the vertex and the center of curvature. It is represented by the letter "F"

D) Radius of Curvature: This is defined as the distance from the vertex to the center of curvature. It is represented by the letter "R"

E) Focal Length: This is defined as the distance from the mirror to the focal point. It's represented by the letter "f"

A toroidal solenoid with 400 turns of wire and a mean radius of 6.0 cm carries a current of 0.25 A. The relative permeability of the core is 80.
(a) What is the magnetic field in the core?
(b) What part of the magnetic field is due to atomic currents?

Answers

Answer:

A) 0.0267 T

B) 0.0263 T

Explanation:

Given that

The number of turns, N = 400

Radius of the wire, r = 6 cm = 0.06 m

Current in the wire, I = 0.25 A

Relative permeability, K(m) = 80

See the attached picture for the calculation

Air flows through a converging-diverging nozzle/diffuser. A normal shock stands in the diverging section of the nozzle. Assuming isentropic flow, air as an ideal gas, and constant specific heats determine the state at several locations in the system. Solve using equations rather than with the tables.

Answers

Answer:

HELLO your question has some missing parts below are the missing parts

note: The specific heat ratio and gas constant for air are given as k=1.4 and R=0.287 kJ/kg-K respectively.

--Given Values--

Inlet Temperature: T1 (K) = 325

Inlet pressure: P1 (kPa) = 560

Inlet Velocity: V1 (m/s) = 97

Throat Area: A (cm^2) = 5.3

Pressure upstream of (before) shock: Px (kPa) = 207.2

Mach number at exit: M = 0.1

Answer: A)  match number at inlet  = 0.2683

              B)  stagnation temperature at inlet =  329.68 k

              C)  stagnation pressure = 588.73 kPa

              D) ) Throat temperature = 274.73 k

Explanation:

Determining states at several locations in the system

A) match number at inlet

= V1 / C1 = 97/ 261.427 = 0.2683

C1 = sound velocity at inlet = [tex]\sqrt{K*R*T}[/tex] = [tex]\sqrt{1.4 *0.287*10^3}[/tex]  = 361.427 m/s

v1 = inlet velocity = 97

B) stagnation temperature at inlet

     = T1 + [tex]\frac{V1 ^2}{2Cp}[/tex]  = 325 + [tex]\frac{97^2}{2 * 1.005*10^{-3} }[/tex]

stagnation temperature = 329.68 k

C) stagnation pressure

= [tex]p1 ( 1 + 0.2Ma^2 )^{3.5}[/tex]

Ma = match number at inlet = 0.2683

p1 = inlet pressure = 560

hence stagnation pressure = 588.73 kPa

D) Throat temperature

= [tex]\frac{Th}{T} = \frac{2}{k+1}[/tex]

Th = throat temperature

T = stagnation temp at inlet = 329.68 k

k = 1.4

make Th subject of the relation

Th = 329.68 * (2 / 2.4 ) = 274.73 k

Mary had 21 plants when she went on vacation. When she got back , she only had 14 left alive. What is the percent of decrease in the number of plants?

Answers

Explanation:

Mary had 21 plants when she went on vacation.

When she got back, she only had 14 left alive.

We need to find the percent decrease in the number of plants.

Decrease in plants = 21 - 14 = 7

Percent decrease is given by :

[tex]\%=\dfrac{7}{21}\times 100\\\\\%=33.33\%[/tex]

So, there is 33% pf decrease in the number of plants.

A system of four particles moves along a dimension. The center of mass is at rest, and the particles do not interact with any objects outside of the system. Find the velocity of v4 at t=2.83 seconds given the details for the motion of particles 1,2,3

Answers

Answer:

v = - 14.08 m / s

Explanation:

The definition of center of mass is

        [tex]x_{cm}[/tex] = 1 /M  ∑sun [tex]x_{i} m_{i}[/tex]

where M is the total mass of the system and [tex]x_{i}[/tex] and [tex]m_{i}[/tex] are the position and mass of each component.

The velocity of the center of mass can be found by deriving this expression with respect to time

         [tex]v_{cm}[/tex] = 1 / M ∑ m_{i} [tex]v_{i}[/tex] vi

let's find the total mass

          M = m₁ + m₂ + m₃ + m₄

          M = 1.45 + 2.81 +3.89 + 5.03

          m = 13.18 kg

let us substitute in the velocity of the center of mass [tex]v_{cm}[/tex] = 0

          0 = 13.18 (m₁ v₁ + m₂ v₂ + m₃v₃ + m₄v₄)

          v₄ = - (m₁ v₁ + m₂ v₂ + m₃v₃) / m₄

let's substitute the given values

v₄ = -[1.45 (6.09 +0.299 t) +2.81 (7.83 + 0.357t) +3.89 (8.09 + 0.405 t)] / 5.03

They ask us for the calculations for a time t = 2.83 s

          v₄ = - [8.8305 + 1.227 + 22.00 + 2.839 + 31.47 +4.4585] / 5.03

          v = - 14.08 m / s

The velocity of the particle 4 at time, t = 2.83 s, is -14.1 m/s.

The given parameters;

[tex]m_1 = 1.45 \ kg, \ \ v_1(t) = (6.09 \ m/s) + (0.299 \ m/s^2)\times t\\\\m_2 = 2.81 \ kg, \ \ v_2(t) = (7.83 \ m/s) + (0.357 \ m/s^2)\times t \\\\m_3 = 3.89 \ kg, \ \ v_3(t) = (8.09 \ m/s) + (0.405 \ m/s^2)\times t\\\\m_4 = 5.03 \ kg[/tex]

The velocity of the center mass of the particles is calculated as;

[tex]M_{cm}V_{cm} = m_1v_1 + m_2 v_2 + m_3v_3 + m_4v_4\\\\V_{cm} = \frac{m_1v_1 + m_2 v_2 + m_3v_3 + m_4v_4}{M_{cm}} \\\\0 = \frac{m_1v_1 + m_2 v_2 + m_3v_3 + m_4v_4}{M_{cm}}\\\\m_1v_1 + m_2 v_2 + m_3v_3 + m_4v_4 = 0\\\\m_4v_4 = -(m_1v_1 + m_2 v_2 + m_3v_3)\\\\v_4 = \frac{-(m_1v_1 + m_2 v_2 + m_3v_3)}{m_4}[/tex]

The velocity of particle 1 at time, t = 2.83 s;

[tex]v_1 = 6.09 \ + \ 0.299\times 2.83\\\\v_1 = 6.94 \ m/s[/tex]

The velocity of particle 2 at time, t = 2.83 s;

[tex]v_2 = 7.83\ + \ 0.357\times 2.83\\\\v_2 = 8.84 \ m/s[/tex]

The velocity of particle 3 at time, t = 2.83 s;

[tex]v_3 = 8.09\ + \ 0.405 \times 2.83\\\\v_3 = 9.24 \ m/s[/tex]

The velocity of the particle 4 at time, t = 2.83 s;

[tex]v_4 = \frac{-(m_1v_1 + m_2v_2 + m_3v_3)}{m_4} \\\\v_4 = \frac{-(1.45\times 6.94\ + \ 2.81\times 8.84\ + \ 3.89 \times 9.24)}{5.03} \\\\v_4 = -14 .1 \ m/s[/tex]

Thus, the velocity of the particle 4 at time, t = 2.83 s, is -14.1 m/s.

Learn more here:https://brainly.com/question/22698801

A 50kg block slides down a slope that forms an angle of 54 degrees if it is known that when descending it has a force of 40N and a coefficient of friction of 0.33. What is the acceleration in the block?

Answers

Answer:

The acceleration in the block is 2.1 m/s²

Explanation:

Given that,

Mass = 50 kg

Angle = 54°

Force = 40 N

Coefficient of friction = 0.33

We need to calculate the acceleration in the block

Using balance equation

[tex]F_{net}=F_{f}-F\cos\theta[/tex]

[tex]ma=\mu mg\sin\theta-F\cos\theta[/tex]

[tex]a=\dfrac{\mu mg\sin\theta-F\cos\theta}{m}[/tex]

Put the value into the formula

[tex]a=\dfrac{0.33\times50\times9.8\sin54-40\cos54}{50}[/tex]

[tex]a=2.1\ m/s^2[/tex]

Hence, The acceleration in the block is 2.1 m/s²

A dipole is oriented along the x axis. The dipole moment is p (= qs). (Assume the center of the dipole is located at the origin with positive charge to the right and negative charge to the left.)
Calculate exactly the potential V (relative to infinity) at a location x, 0, 0 on the x axis and at a location 0, y, 0 on the y axis, by superposition of the individual 1/r contributions to the potential. (Use the following as necessary: q, ε0, x, s and y.)

Answers

Answer:

Explanation:

dipole moment = qs = q x s

= charge x charge separation

charge = q

separation between charge = s

half separation l = s / 2

dipole has two charges + q and - q separated by distance s .

Potential at distance x along x axis due to + q

[tex]v_1=\frac{1}{4\pi \epsilon } \times\frac{q}{x-l}[/tex]

Potential at distance x along x axis due to - q

[tex]v_2=\frac{1}{4\pi \epsilon } \times\frac{-q}{x+l}[/tex]

Total potential

v = v₁ + v₂

[tex]v=\frac{1}{4\pi \epsilon } \times( \frac{q}{x-l}-\frac{q}{x+l})[/tex]

[tex]v=\frac{1}{4\pi \epsilon } \times\frac{2ql}{x^2-l^2}[/tex]

[tex]v=\frac{1}{4\pi \epsilon } \times\frac{qs}{x^2-(\frac{s}{2}) ^2}[/tex]

Potential at distance y along y axis due to + q

[tex]v_1=\frac{1}{4\pi \epsilon } \times\frac{qs}{(y^2+\frac{s^2}{4})^\frac{1}{2} }[/tex]

Potential at distance y along y axis due to - q

[tex]v_1=\frac{1}{4\pi \epsilon } \times\frac{-qs}{(y^2+\frac{s^2}{4})^\frac{1}{2} }[/tex]

Total potential

v = v₁ + v₂

[tex]v= 0[/tex]

When a battery is connected to a lightbulb properly, current flows through the lightbulb and makes it glow. How much current flows through the battery compared with the lightbulb

Answers

Answer:

The same amount of current flows through the battery and light bulb

Explanation:

Because for a single loop, the current is the same at every point in the loop. Thus, the amount of current that flows through the lightbulb is the same as the amount that flows through the battery

Answer:

The same amount of current flows through the battery and light bulb

Explanation:

A heat engine operates between 200 K and 100 K. In each cycle it takes 100 J from the hot reservoir, loses 25 J to the cold reservoir, and does 75 J of work. This heat engine violates the second law but not the first law of thermodynamics. Why is this true?

Answers

Answer:

It does not violate the first law because the total energy taken is what is used 100J = 25J + 75J

But violates 2nd lawbecause the engine has a higher energy after doing work than the initial for e.g A cold object in contact with a hot one never gets colder, transferring heat to the hot object and making it hotter confirming the second law

If you wish to observe features that are around the size of atoms, say 5.5 × 10^-10 m, with electromagnetic radiation, the radiation must have a wavelength of about the size of the atom itself.


Required:

a. What is its frequency?

b. What type of electromagnetic radiation might this be?

Answers

Answer:

a) 5.5×10^17 Hz

b) visible light

Explanation:

Since the wavelength of the electromagnetic radiation must be about the size of the about itself, this implies that;

λ= 5.5 × 10^-10 m

Since;

c= λ f and c= 3×10^8 ms-1

f= c/λ

f= 3×10^8/5.5 × 10^-10

f= 5.5×10^17 Hz

The electromagnetic wave is visible light

What type of tectonic plate boundary exists along the edge of the North American plate near the coast of Northern California, Oregon, and Washington?
A reverse fault, like the Cascadia subduction zone off the coast of Oregon and Northern California (north of Mendocino California), has relatively deep earthquakes—like the 1964 Alaska earthquake and the 2004 Sumatra earthquake that caused the Boxing Day Tsunami.
True
False
Megathrust earthquakes can be strongest in magnitude—stronger than a San Andreas earthquake like 1906

Answers

Answer:

-transform plate boundary

- false

Two identical trucks have mass 5500 kg when empty, and the maximum permissible load for each is 8000 kg. The first truck, carrying a 3900 kg, is at rest. The second truck plows into it at 64 km/h, and the pair moves away at 44 km/h. As an expert witnes, you're asked to determine whether the second truck was overloaded. What do you report? Yes the truck is overloaded, or no, the truck is not overloaded?

Answers

Answer:

no, the truck is not overloaded

Explanation:

The computation is shown below;

Let us assume the mass of the loan in the second truck be M

So, the equation is as follows

{(Mass + M) × second truck × 1000 ÷ 3,600} = {(Mass + M + mass + first truck) × Pair moves away  × 1,000 ÷ 3,600}

{(5500 + M) × 64 × 1,000 ÷ 3,600 = {(5,500 + M + 5,500 + 3,900) × 44 × 1,000 ÷ 3,600}

(5500 + M) × 64 = (14,900 + M) × 44

352,000 + 64 M = 655,600 + 44 M

After solving this

M = 15,180 kg

Therefore the second truck is not overloaded

Kasek rides his bicycle down a 6.0° hill (incline is
6° with the horizontal) at a steady speed of 4.0
m/s. Assuming a total mass of 75 kg (bicycle and
Kasek), what must be Kasek's power output to
climb the same hill at the same speed? ​

Answers

Answer:

 P = 2923.89 W  

Explanation:

Power is

     P = F v

for which we must calculate the force, let's use Newton's second law, let's set a coordinate system with a flat parallel axis and the other axis (y) perpendicular to the plane

X Axis  

         F - Wₓ = 0

         F = Wₓ

Y Axis

         N -  [tex]W_{y}[/tex] = 0

let's use trigonometry for the components of the weight

         sin 6 = Wₓ / W

         cos 6 = W_{y} / W

         Wₓ = W sin 6

         W_{y} = W cos 6

          F = mg cos 6

          F = 75 9.8 cos 6

          F = 730.97 N

let's calculate the power

        P = F v

        P = 730.97 4.0

        P = 2923.89 W

Question 5 of 25
Which of the following means that a mirror is convex?
A. +d;
B. -d;
O C. +f
O D. -f


Answers

The sign that represents a convex mirror is +f (option C). Details about convex mirror can be found below.

What is a convex mirror?

A convex mirror is that which is curved or bowed outward like the outside of a bowl or sphere or circle.

The focal length is the distance at which a lens or mirror is in focus. The focal length (f) is usually positive (+) for a convex mirror.

Therefore, the sign that represents a convex mirror is +f.

Learn more about convex mirror at: https://brainly.com/question/3627454

#SPJ1

You need to make a spring scale to measure the mass of objects hung from it. You want each 1.0 cm length along the scale to correspond to a mass difference of 0.10 kg. What should be the value of the spring constant?

Answers

Answer:

The spring constant should be:

[tex]k= 98\, \frac{N}{m}[/tex]

Explanation:

Use Hooke's law for this problem, knowing that the magnitude of the force (F) on the spring equals the stretching it experiences [tex]\Delta x[/tex] times the spring constant "k":

[tex]F=k\,\Delta x[/tex]

in our case, since the mass hanging is given in kg, we need to multiply it by "g" to get the force exerted:

Then if we add to the spring in its relaxed state, a mass of 0.10 kg, and we want for that a displacement of 1 cm (0.01 m), then the value of the spring constant should be:

[tex]k=\frac{F}{\Delta x} \\k=\frac{9.8\,(0.1)}{0.01} \, \frac{N}{m} \\k= 98\, \frac{N}{m}[/tex]

A circuit contains a single 220 pF capacitor hooked across a battery. It is desired to store three times as much energy in a combination of two capacitors by adding a single capacitor to this one.
How would you hook it up?
The capacitor is connected in series to the original capacitor
or
The capacitor is connected in parallel to the original capacitor
I believe its parallel
but now What would its value be?

Answers

Answer

The capacitor should be connected in parallel as parallel connection gives the arithmetic sum of capacitance which will give a corresponding sum of energy while capacitors in series gives the sum of the reciprocal if the individual capacitance

Scientists today learn about the world by _____. 1. using untested hypotheses to revise theories 2. observing, measuring, testing, and explaining their ideas 3. formulating conclusions without testing them 4. changing scientific laws

Answers

Answer:

Option 2 (observing, measuring, testing, and explaining their ideas) is the correct choice.

Explanation:

A traditional perception of such a scientist is those of an individual who performs experiments in some kind of a white coat. The reality of the situation is, a researcher can indeed be described as an individual interested in the comprehensive as well as a recorded review of the occurrences occurring in nature but perhaps not severely constrained to physics, chemistry as well as biology alone.

The other three choices have no relation to a particular task. So the option given here is just the right one.

A rod of length L is hinged at one end. The moment of inertia as the rod rotates around that hinge is ML2/3. Suppose a 2.50 m rod with a mass of 3.00 kg is hinged at one end and is held in a horizontal position. The rod is released as the free end is allowed to fall. What is the angular acceleration as it is released?

Answers

Answer:

6 rad/s²

Explanation:

Sum the torques about the hinge.

∑τ = Iα

mg(L/2) = mL²/3 α

g/2 = L/3 α

α = 3g/(2L)

α = 3 (10 m/s²) / (2 × 2.50 m)

α = 6 rad/s²

Light with an intensity of 1 kW/m2 falls normally on a surface with an area of 1 cm2 and is completely absorbed. The force of the radiation on the surface is

Answers

Answer:

The force of the radiation on the surface is 3.33 x 10⁻¹⁰ N

Explanation:

Given;

intensity of light, I = 1kw/m² = 1000 W/m²

area of the surface, A = 1 cm² = 1 x 10⁻⁴ m²

Since the light is completely absorbed, the force of the radiation is given by;

F = P/c

where;

c is the speed of light = 3 x 10⁸ m/s

But P = IA

F = IA /c

F = (1000 X 1 X 10⁻⁴) / 3 x 10⁸

F = 3.33 x 10⁻¹⁰ N

Therefore, the force of the radiation on the surface is 3.33 x 10⁻¹⁰ N

The force of radiation will be "3.33 × 10⁻¹⁰ N"

Intensity and Force

According to the question,

Intensity of force, I = 1 kW/m² or,

                               = 1000 W/m²

Area of surface, A = 1 cm² or,

                              = 1 × 10⁻⁴ m²  

Speed of light, c = 3 × 10³ m/s

As we know the relation,

→ F = [tex]\frac{P}{c}[/tex]

or,

  P = IA

or,

  F = [tex]\frac{IA}{c}[/tex]

By substituting the values, we get

     = [tex]\frac{1000\times 1\times 10^{-4}}{3\times 10^3}[/tex]

     = 3.33 × 10⁻¹⁰ N

Thus the response above is correct.

Find out more information about intensity here:

https://brainly.com/question/1444040

Other Questions
Write 1.4888.. in form of p/q Please make 6 Sentences usingSo..... ThatSuch.... That Find the greatest common factor for each of the following expressions, then factor each expression. a. 4p 4 = ? b. x4 + x3 + x2 = ? c. 8p2 + 9p2q = ? d. x2y2 + 3xy 4x 2x4y3 = ? Factor each of the following expressions. a. 4a3 + 28a2 + 4a + 28 = ? b. x3 + 3x2 2x 6 = ? c. 8x2 4xy + 2x y = ? Factor each of the following, using the difference of perfect squares where possible. a. u2 100 = ? b. 4a2 49 = ? c. 81 y2= ? d. 16q4 16 = ? e. 9c3 9c = ? f. 48a2b 12b = ? wyatt uses 3.15 cups of flour in a recipe that makes 9 shortcakes. Cora uses 2.4 cups of flour in a recipe that makes 8 shortcakes. How much more flower per shortcake is needed for Cora's recipe? The driveway needs to be resurfaced. what is the BEST estimate of the area of the driveway? HELP ASAP[tex]Given that $33^{-1} \equiv 77 \pmod{508}$, find $11^{-1} \pmod{508}$ as a residue modulo 508. (Give an answer between 0 and 507, inclusive.)[/tex] Draw the major organic product that is expected when cyclopentanecarboxylic acid is treated with each of the following reagents:a. NaOHb. [H+] Suppose that a worker in Boatland can produce either 5 units of wheat or 25 units of fish per year, and a worker in Farmland can produce either 25 units of wheat or 5 units of fish per year. There are 30 workers in each country. No trade occurs between the two countries. Boatland produces and consumes 75 units of wheat and 375 units of fish per year while Farmland produces and consumes 375 units of wheat and 75 units of fish per year. If trade were to occur, Boatland would trade 90 units of fish to Farmland in exchange for 80 units of wheat. If Boatland now completely specializes in fish production, how many units of fish could it now consume along with the 80 units of imported wheat? Which one of the following is NOT a part of a summary?Select one A using your own wordsB. summary being shorter than the textC. Exact words from the textD. including main des only A collector as a set of 224 coins. Some are valued at 20 cents and others at 25 cents. If the collector has 74 25-cent coins, then what is the total value of the collection The weight of a box varies directly as the volume of the box. If a 138-pound box has a volume of 23 gallons, what is the weight of a box that has a volume of 25 gallons? A. 31 pounds B. 150 pounds C. 138 pounds D. 29 pounds What is the main idea of William Pitts speech about the stamp act would someone plz help me 1. The cost of buying some books is partly constant and partly varies with the number of books bought. The cost is #4800 when 20 books are bought and #8000 when 40 are bought. Find the cost when 1000 books are bought What type of transmission occurs when a pathogen is spread though sneezing or coughing Question 16 Multiple Choice Worth 2 points)(01.02 MC)Read and choose the option that best completes the sentence.Es mi cumpleaos y tengo la fiesta en la casa de mi amiga Celeste. Me maquillo yla cara en el espejo antes de ir a la fiesta por la noche.me afeitoOme mirome duermoO me pongo answer answer it it it Every time Liliana bakes a batch of brownies, she uses 34 cup of chocolate. If she has 128 cup(s) of chocolate remaining, how many batches of brownies can Liliana make? Input your answer as a whole number. the unit of energy is a derived unit Solve the equation 3(2x + 2) = 3x 15.