Answer: The balanced half-equations for silver + oxygen= silver oxide are:
Oxidation-half reaction: [tex]Ag \rightarrow 2Ag^{+} + 2e^{-}[/tex]
Reduction-half reaction: [tex]O_{2} + 2e^{-} \rightarrow 2O^{-}[/tex]
Explanation:
The word equation is as follows.
silver + oxygen = silver oxide
In terms of chemical formulas this equation can be written as follows.
[tex]Ag + O_{2} \rightarrow Ag_{2}O[/tex]
The removal on electron(s) from an atom, ion or molecule in a chemical reaction is called oxidation.
The gain of electron(s) by an atom, ion or molecule in a chemical reaction is called reduction.
Hence, half-reaction equations for the given reaction is as follows.
Oxidation-half reaction: [tex]Ag \rightarrow 2Ag^{+} + 2e^{-}[/tex]
Reduction-half reaction: [tex]O_{2} + 2e^{-} \rightarrow 2O^{-}[/tex]
As the number of atoms participating in the reaction are equal. Hence, the half-equations are balanced.
Thus, we can conclude that the balanced half-equations for silver + oxygen = silver oxide are:
Oxidation-half reaction: [tex]Ag \rightarrow 2Ag^{+} + 2e^{-}[/tex]
Reduction-half reaction: [tex]O_{2} + 2e^{-} \rightarrow 2O^{-}[/tex]
The addition of chromic acid or chromate is a qualitative test for alcohols as the reaction causes a color change. However, not all alcohols react with chromic acid or chromate. Determine whether the named alcohol will react with chromic acid or chromate to cause a color change.
a. 3-hexanol
b. 1 -butanol
c. 2-pentanol
d. 3-ethyl-3-pentanol
Answer:
3-hexanol
1 -butanol
2-pentanol
Explanation:
Let us recall that chromic acid or chromate are strong oxidizing agents. When they are oxidized, their colour changes from orange to green.
This shows a reduction in chromic acid or chromate. The reaction of chromic acid or chromate with a primary alcohol yields a carboxylic acid while reaction with a secondary substrate yields an alkanal.
Note that Tertiary alkyl halides are not be oxidized hence reactions involving a point where invitation carried along occur.
3-ethyl-3-pentanol is a tertiary alkyl halide hence it can not be oxidized.
which of the following is not an instance of benefit in from gases ?
1) filling thermometers
2) inflating tyres
3) in LP gas cylinders
4) in pressure cookers
Answer:
1) filling thermometers
Explanation:
thermometers are filled with liquid mercury
An object was measured by a worker as 14.6cm long, however, the manufacturer specifications list the length of the object at 14.4cm. What is the percent error in the worker's measurement? A. 1.39%
B. 1.37%
it's 0.2cm different from the expected value, wich was 14.6cm
how many percent that are is calculated in the screenshot.
rounded it's 1.37%
What type of a liquid will have a pH value equal to 12? (1 point)
Basic
Neutral
Strong acid
Weak aci
Answer: it will be basic
pH that ranges from 0-6 are acid
pH of EXACTLY 7 is neutral
pH greater than 7 are strongly basic or base
Imagine you are celebrating a birthday in December and need balloons. The temperature in the
store where you are purchasing the balloons is approximately 25°C and each balloon is filled
to a volume of 2 liters to obtain maximum pressure.
Use the gas laws to explain what will happen to the volume and pressure of the gas in the
balloon when go outside, where the temperature is 0°C. Include both Charles's Law
and Gay-
Lussac's Law in your answer.
ILL GIVE BRAINIEST PLEASE HELP
A beaker is filled to the 500 mL mark with alcohol. What increase in volume (in mL) does the beaker contain when the temperature changes from 5° C to 30° C? (Neglect the expansion of the beaker, evaporation of alcohol and absorption of water vapor by alcohol.) The volume coefficient of expansion γγ for alcohol = 1.12 x 10-4 K-1
Answer:
"1.4 mL" is the appropriate solution.
Explanation:
According to the question,
[tex]v_0=500[/tex][tex]\alpha =1.12\times 10^{-4}[/tex][tex]\Delta \epsilon = 25[/tex]Now,
Increase in volume will be:
⇒ [tex]\Delta V = \alpha\times v_0\times \Delta \epsilon[/tex]
By putting the given values, we get
[tex]=1.12\times 10^{-4}\times 500\times 25[/tex]
[tex]=1.12\times 10^{-4}\times 12500[/tex]
[tex]=1.4 \ mL[/tex]
Explain why ionic compounds have higher boiling points than covalent compounds.
Answer:
because the have stronger electrostatic force
What kind of light would an electron experiencing n=4 to n=2 drop emit?
Hi there!
[tex]\large\boxed{\text{Visible Light.}}[/tex]
According to the diagram and the arrows, a drop from level 4 (n = 4) to level 2 (n = 2) produces orange visible light.
[tex]\red\large{{}}[/tex]
Which mechanisms is most significant in returning the ion concentrations to the resting state?
Answer:
Active transport by the Na+-K+ pump
Explanation:
Active transport by the Na+-K+ pump
Maintenance (and restoration) of the resting ion concentrations depends on the Na+-K+ pump. Once gated ion channels are closed, the combined action of the pump and ion leakage (particularly that of K+) establishes a resting membrane potential in a typical neuron of around âˆ'70 mV.
54
Penny bought a club moss plant for her water garden. She needs to know how tall the plant will grow so she know
how much space it will need.
How tall will the plant likely grow?
O less than 5 centimeters because it is a seedless vascular plant
less than 5 centimeters because it is a nonvascular plant
O more than 5 centimeters because it is a seedless vascular plant
O more than 5 centimeters because it is a nonvascular plant
Answer:
less than 5 centimeters because it is a nonvascular plant
Explanation:
Mosses are a group of plants under the division Bryophyta. They are said to be the most primitive plant life in existence as they lack true roots, stems and leaves. They also lack vascular system, hence, they are regarded as non-vascular plants. They usually grow in very small sizes (about 0.2 - 10cm).
According to this question, Penny bought a club moss plant for her water garden and needs to know how tall the plant will grow so she know how much space it will need. Since it is a miss plant that lacks vascular tissues i.e. nonvascular, it will likely grow less than 5 centimeters in height.
Answer:
d
Explanation:
which is not one of daltons hypothesis of atomic theory
elements are composed of atoms
compounds are composed of atoms of more than one element
a chemical reaction involved the rearranging of atoms
all atoms of a given element are identical
the atoms of one element are the same as another
Answer:
because atoms is just a chemical ahahahah
Explanation:
hope it helps ☺️
Dalton's hypothesis of atomic theory was given by John Dalton. The atoms of one element are the same as another and are not part of Dalton. Thus, option E is correct.
What is Dalton's theory?Dalton gave the atomic theory where atoms are the fundamental unit of the element of the periodic table. More than one element and atoms combine to form molecules and compounds.
The property of the atoms to get rearranged is the basis of the chemical reaction that results in the formation of the new product. This resulted in the formulation of chemical combinations. The atoms of the given element are said to be the same like the potassium contains the same atom.
The atoms of one element cannot be the same as another atom, like the atom of sodium and chloride are not the same. They are different in physical and chemical properties.
These atoms follow the law of conservation of mass. The atoms are composed of sub-atomic particles that have been constituted of neutrons, electrons, and protons.
Therefore, in option E. the atoms of two elements can never be the same.
Learn more about Dalton's theory, here:
https://brainly.com/question/15507302
#SPJ2
Predict the product when 2-methylbutanol is oxidised with pyridium chlorochromate in dichloromethane (PCC/CH2C12) a. CH3CH2CH(CH3)COOH b. CH3CH2CH2CH(CH3)CHO C. CH3CH2CH(CH3)CHO d. CH3CH2CH(CH3)OH 8:40 PM Type a message
Answer:
c. CH3CH2CH(CH3)CHO
Explanation:
Hello there!
In this case, according to the process for the one-step oxidation of a primary alcohol with a moderately strong oxidizing agent like pyridinium chlorochromate (PCC), whereby an aldehyde is produced, we infer that the corresponding product will be 2-methylbutanal, which matches with the choice c. CH3CH2CH(CH3)CHO according to the following reaction:
[tex]CH_3CH_2CH(CH_3)CH_2OH\rightarrow CH_3CH_2CH(CH_3)COH[/tex]
Regards!
Will give brainliest answer please give explanation
33.5 cs=_________s
Answer: 3.4 × 10 -1 equal 33.5 cs. May I have brainiest? pls. (the -1 is to the power of the ten.
What do phase diagrams demonstrate?
Select all that apply.
how the melting and boiling points of a substance change with pressure
how much heat will increase the temperature of a gram of a substance by 1°C
the pressure and temperature conditions in which a substance exists as a liquid, solid, or gas
a comparison of the temperature of a substance to the heat absorbed over time
Answer:
this answer is for first one
Explanation:
A higher evalations, where the atmospheric pressure is much lower, the boiling point increase with increased pressure up to the critical point where the gas and liquid properties become identical
A 1.19 g sample of an unknown halogen occupies 109 mL at 398 K and 1.41 atm. What is the identity of the halogen
Answer:
The halogen is Iodine.
Explanation:
Using the ideal gas equation, we find the number of moles of gas present, n.
PV = nRT where P = pressure of gas = 1.41 atm, V = volume of gas = 109 mL = 0.109 L, n = number of moles of gas, R = molar gas constant = 0.082 L-atm/mol-K and T = temperature of gas = 398 K
Since PV = nRT, making n subject of the formula, we have
n = PV/RT
substituting the values of the variables into the equation, we have
n = 1.41 atm × 0.109 L/(0.082 L-atm/mol-K × 398 K)
n = 0.15369 atm-L/32.636 L-atm/mol
n = 0.0047 mol
Since n = m/M where m = mass of gas = 1.19 g and M = relative molecular mass of gas
So, M = m/n
M = 1.19 g/0.0047 mol
M = 252.7 g
Since halogens are diatomic the relative atomic mass is M/2 = 252.7g/2 = 126.34 g
From tables, the only halogen with this atomic mass is Iodine.
So, the halogen is Iodine.
Describe how you would prepare your assigned ester from a carboxylic acid and an alcohol. You do not need to include a detailed procedure, but you should include any necessary reagents or catalyst (solvents are not needed).
Answer:
The general preparation of esters( for example ethyl ethanoate) is through a process known as ESTERIFICATION.
Explanation:
The formation of an ester by the reaction between an alkanol and an acid is known as esterification. This reaction is extremely slow and reversible at room temperature, and is catalyzed by a high concentration of hydrogen ions.
In the preparation of one of the simpler esters known as ETHYL ETHANOATE the reactants include ethanol(an alcohol) and glacial ethanoic acid(a carboxylic acid) in the presence of concentrated tetraoxosulphate VI acid as a CATALYST. Note that, a catalyst is any substance that is able to increase the rate of a chemical reaction.
The mixture is warmed in a water bath( hot but not boiling) for about 25 minutes. The mixture is poured into a beaker partially filled with a sodium or calcium chloride to remove interacted ethanol. The ethyl ETHANOATE floats on the mixture as oily globules.
How long must a 40.0 amp current flow through a solution of iron(III) chloride in order to produce 5.00 moles of iron?
Answer:
10.1 h
Explanation:
Let's consider the reduction half-reaction of iron from an aqueous solution of iron (III) chloride.
Fe³⁺(aq) + 3 e⁻ ⇒ Fe(s)
We can calculate the time required to produce 5.00 moles of Fe using the following relationships.
1 mole of Fe is produced when 3 moles of electrons circulate.1 mole of electrons has a charge of 96486 C (Faraday's constant).1 A = 1 C/s.1 h = 3600 s.[tex]5.00molFe \times \frac{3 mole^{-} }{1molFe} \times\frac{96486C}{1mole^{-} } \times \frac{1s}{40.0C} \times \frac{1h}{3600s} = 10.1 h[/tex]
What is unit? Write down the units of mass, temperature and power
Explanation:
a single thing, person, or group forming part of a whole There are 36 units in my apartment building. the least whole number : one. a fixed quantity (as of length, time, or value) used as a standard of measurement An inch is a unit of length.mass=kilogram (kg)
temperature=kelvin
power=watt
hope it helps
stay safe healthy and happy... Gastric juice, the digestive fluid produced in the stomach, contains hydrochloric acid, HCl. Milk of Magnesia, a suspension of solid Mg(OH)2 in an aqueous medium, is sometimes used to neutralize excess stomach acid. Write a complete balanced equation for the neutralization reaction, and identify the conjugate acid-base pairs.
Answer:
Mg(OH)2 + 2HCI = MgCI2 + 2H2O
Explanation:
Please correct me if I am wrong
How do forces between particles in gases compare to forces in the other states of matter?
The forces in gases are weaker than forces in solids and liquids.
Because they have more kinetic energy that overcomes the force of attraction.
How many doubtful digit(s) is/are allowed in any measured quantity?
(Only 3 choices.)
A.) 1
B.) 2
C.) zero
Answer:
zero
Explanation:
I I think one should be so accurate with measurements and experiments
chemistry help!
This mysterious gas has a volume of 4.35 L and a pressure of 1.20 atm. If the pressure is changed to 0.95 atm, what will the new volume be? How do i set up this problem and solve it?
Refer to the attachment.
Hope this helps you...
The total entropy of a system and its surroundings always increases for a spontaneous process. This is a statement of
Answer:
second law of thermodynamics
Explanation:
According to the second law of thermodynamics, the total entropy of a system and its surroundings always increases for a spontaneous process.
Entropy is defined as the degree of disorderliness of a system. The entropy of a system never remains constant. It either increases or decreases in a process. The total entropy is the sum of the entropy of the system and its surrounding. The total entropy must increase in a spontaneous process.
Thus, the implication of this law is that even, if the entropy of a system decreases, this must be compensated for by increase in entropy of the surroundings in order for the process to be spontaneous.
A 25.0 mL sample of a saturated C a ( O H ) 2 solution is titrated with 0.029 M H C l , and the equivalence point is reached after 37.3 mL of titrant are dispensed. Based on this data, what is the concentration (M) of the hydroxide ion?
Answer:
0.043 M
Explanation:
The reaction that takes place is:
Ca(OH)₂ + 2HCl → CaCl₂ + 2H₂OFirst we calculate how many HCl moles reacted, using the given concentration and volume required to reach the equivalence point:
0.029 M HCl * 37.3 mL = 1.0817 mmol HCl = 1.0817 mmol H⁺As 1 mol of H⁺ reacts with 1 mol of OH⁻, in the 25.0 mL of the Ca(OH)₂ sample there are 1.0817 mmoles of OH⁻.
With that in mind we can calculate the hydroxide ion concentration in the original sample solution, using the calculated number of moles and given volume:
1.0817 mmol OH⁻ / 25.0 mL = 0.043 MThe titration is termed the neutralization reaction with the acid and base. The concentration of hydroxide in the titration is 0.0865 M.
What is a neutralization reaction?The neutralization reaction is given as the reaction in which the acid and base react to form the salt and water, stabilizing the pH of the solution.
The neutralization of acid and base to identify the strength can be given as:
[tex]\rm M_V_1=M_2V_2[/tex]
Substituting the strength and the volume of calcium hydroxide and the HCl with the volume:
[tex]\rm 0.029\;M\;\times\;37.3\;mL=M_2\;\times\;25\;mL\\M_2=\dfrac{ 0.029\;M\;\times\;37.3\;mL}{25\;mL} \\M_2=0.0432\;M[/tex]
The strength of the calcium hydroxide in the reaction is 0.04326 M.
One molar unit of calcium hydroxide results in 2 molar units of hydroxide. The molar unit of hydroxide in 0.04326 M calcium hydroxide is:
[tex]\rm 1\;M\;Ca(OH)_2=2\;M\;OH^-\\\\0.04326\;M\;Ca(OH)_2=0.04326\;\times\;2\;M\;OH^-\\0.04326\;M\;Ca(OH)_2=0.0865\;M\;OH^-[/tex]
The concentration of hydroxide ion in the titration is 0.0865 M.
Learn more about molarity, here:
https://brainly.com/question/12127540
A cylinder contains 3.1 L of oxygen at 300 K and 2.7 atm. The gas is heated, causing a piston in the cylinder to move outward. The heating causes the temperature to rise to 610 K and the volume of the cylinder to increase to 9.4 L.
How many moles of gas are in the cylinder?
Express your answer using two significant figures.
Answer: The moles of gas present in the cylinder is 0.34 moles.
Explanation:
Given: [tex]P_{1}[/tex] = 2.7 atm, [tex]V_{1}[/tex] = 3.1 L, [tex]T_{1}[/tex] = 300 K
[tex]P_{2}[/tex] = ?, [tex]V_{2}[/tex] = 9.4 L, [tex]T_{2}[/tex] = 610 K
Formula used to calculate the final temperature is as follows.
[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}[/tex]
Substitute the values into above formula as follows.
[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}\\\frac{2.7 atm \times 3.1 L}{300 K} = \frac{P_{2} \times 9.4 L}{610 K}\\P_{2} = \frac{5105.7}{2820} atm\\= 1.81 atm[/tex]
Now, moles present upon heating the cylinder are as follows.
[tex]P_{2}V_{2} = n_{2}RT_{2}\\1.81 atm \times 9.4 L = n_{2} \times 0.0821 L atm/mol K \times 610 K\\n_{2} = \frac{17.014}{50.081} mol\\= 0.34 mol[/tex]
Thus, we can conclude that moles of gas present in the cylinder is 0.34 moles.
Which of the five type of equilibrium problems best applies to this question: Consider the following reaction at equilibrium. What effect will reducing the volume of the reaction mixture have on the system
Answer:
d
Explanation:
Identify the change in state that does NOT have an increase in entropy. Identify the change in state that does NOT have an increase in entropy. water evaporating dry ice subliming steam condensing water boiling popsicle melting
Answer:
condensing water
Explanation:
Entropy refers to the level of disorderliness in a system. The entropy of liquids is greater than that of solids. The entropy of gases is greater than that of liquids.
A process of physical change involving a change of state from solid to liquid or liquid to gas is accompanied by increase in entropy.
However, a change of state involving a change from liquid to solid or gas to liquid is accompanied by decrease in entropy.
Hence, steam condensing to water leads to decrease and not increase in entropy of the system.
What are the concentrations of hydronium and hydroxide ions in a solution with pH 2.6?
Please help omg. Ive been stuck for 15 minutes
Answer:
The concentrations of hydronium and hydroxide ions in a solution with pH 2.6 are 2.51*10⁻³ and 3.98*10⁻¹² respectively.
Explanation:
pH is a measure of the acidity or alkalinity of an aqueous solution. The pH indicates the concentration of hydrogen ions present in certain solutions. Mathematically it is defined as the opposite of the base 10 logarithm or the negative logarithm of the activity of hydrogen ions, whose equation is
pH= -log [H⁺]
So, being pH= 2.6 and replacing in the definition of pH:
2.6= -log [H⁺]
[tex][H^{+} ]=10^{-2.6}[/tex]
[H⁺]=2.51*10⁻³
pOH is a measure of the concentration of hydroxide ions (OH⁻). The sum between the pOH and the pH results in 14:
pOH + pH= 14
So, being pH= 2.6:
pOH + 2.6= 14
pOH= 14 - 2.6
pOH= 11.4
The pOH is defined as the negative logarithm of the activity of the hydroxide ions. That is, the concentration of OH⁻ ions:
pOH= - log [OH⁻]
Being pOH= 11.4 and replacing
11.4= -log [OH⁻]
[tex][OH^{-} ]=10^{-11.4}[/tex]
[OH⁻]= 3.98*10⁻¹²
The concentrations of hydronium and hydroxide ions in a solution with pH 2.6 are 2.51*10⁻³ and 3.98*10⁻¹² respectively.
When we react a weak acid with a strong base of equal amounts and concentration, the component of the reaction that will have the greatest effect on the pH of the solution is: Select the correct answer below:_________
a. the reactant acid
b. the reactant base
c. the conjugate acid of the strong base
d. the conjugate base of the weak acid
Answer:
d. the conjugate base of the weak acid
Explanation:
The strong base (BOH) is completely dissociated in water:
BOH → B⁺ + OH⁻
The resulting conjugate acid (OH⁻) is a weak acid, so it remains in solution as OH⁻ ions.
By other hand, the weak acid (HA) is only slightly dissociated in water:
HA ⇄ H⁺ + A⁻
The resulting conjugate base (A⁻) is a weak base. Thus, it reacts with H⁺ ions from water to form HA, increasing the concentration of OH⁻ ions in the solution.
Therefore, the resulting solution will have a pH > 7 (basic).
Write two balanced half-equations for this redox equation:
2Cu + O2 = 2CuO
Answer:
2 Cu + O2 → 2 CuO
This is an oxidation-reduction (redox) reaction:
2 Cu0 - 4 e- → 2 CuII
(oxidation)
2 O0 + 4 e- → 2 O-II
(reduction)
Cu is a reducing agent, O2 is an oxidizing agent.
