write the equation of a circle whose center is at latex: \left(-11,\:15\right) and whose radius is latex: 9 9 .

Initially, while maintaining the very same [tex]x-[/tex]coordinates, the negative reflect across the [tex]x-axis[/tex] modifies the signs of all locations' [tex]y-[/tex]coordinates.

A negative value is one that always has a value lower than zero and is denoted by the minus (-) symbol. In a number line, negative values are displayed just left of zero.

If a number is higher than zero, it is considered positive. Or less zero numbers are referred to as negative numbers. If a number is bigger than that or equal to zero, it is not negative. If a number falls below or equal to zero, it is non-positive.

This transforms Figure [tex]1[/tex] into a new figure with points [tex](-2, -5), (-2, -4), (-3, -4), (-3, -2), (-5, -2), (-5, -5)[/tex].

Next, the [tex]180^{0}[/tex] rotation about the origin swaps the signs of both [tex]x[/tex] and [tex]y[/tex] coordinates of each point. This results in the final figure with points [tex](2, -5), (2, -4), (3, -4), (3, -2), (5, -2), (5, -5)[/tex].

To know more about negative visit:

https://brainly.com/question/25669896

#SPJ1

The process to show that if 16 people are seated in a row of 20 chairs, then some group of 4 consecutive chairs must be occupied is shown below.

We prove this using the Pigeonhole Principle, which states that if n items are placed into m containers, and n > m, then at least one container must contain more than one item.

Let us consider the 16 people seated in a row of 20 chairs. Each person occupies one chair, so there are 20 - 16 = 4 empty chairs in the row.

We assume that empty chairs as containers, and people as items that need to be placed into containers.

Since there are more items (people) than containers (empty chairs), there must be at least one group of 2 or more consecutive empty chairs.

Now, let's consider the complement of this statement: Suppose there are no groups of 4 consecutive chairs that are occupied. Then, each group of 4 consecutive chairs contains at most 3 people.

We partition the row of chairs into groups of 4 consecutive chairs.

So, there are 20 - 3 = 17 such groups. By the statement above, each of these groups contains at most 3 people. Therefore, the total number of people seated in the row is at most 17×3 = 51.

But, we know that there are actually 16 people seated in the row. This is a contradiction, since 51 < 16. Therefore, our assumption that there are no groups of 4 consecutive chairs that are occupied must be false, and we have proved that some group of 4 consecutive chairs must be occupied.

Learn more about Pigeonhole Principle here

https://brainly.com/question/30322724

#SPJ4

Answer:

B

Step-by-step explanation:

It's like a piece of paper, fold it in half

The length of the top of the bookcase should be approximately 25 inches to display the soap carving collection with an area of 300 in².

To find the length of the top of the bookcase (which we'll call "b"), we need to know the area of the collection of soap carvings and the formula for the area of a rectangle:

Area = length x width

We're given the area of the soap carving collection (300 square inches), and we know that the soap carvings will be displayed on top of the bookcase, which is a rectangle.

Let's assume that the width of the bookcase is 1 unit (we can choose any unit we want, as long as we're consistent). Then we can write:

300 = b x 1

Simplifying this equation, we get:

b = 300/1

b = 300

So the length of the top of the bookcase should be 300 inches. However, this assumes that the width of the bookcase is only 1 inch, which is quite narrow.

If we assume a more reasonable width of, say, 12 inches, then we can write:

300 = b x 12

Simplifying this equation, we get:

b = 300/12

b = 25

So the length of the top of the bookcase should be 25 inches (if the width of the bookcase is 12 inches).

Learn more about length here: https://brainly.com/question/28108430

#SPJ1

The area of the composite figure is 159.9 cm²

From the question, we are to determine the area of the given composite figure

In the given diagram, the area of the composite figure = Area of triangle + Area of rectangle

First, we will calculate the area of the triangle

Area of triangle = 1/2 × base × height

Thus,

Area of the triangle = 1/2 × 16.4 × 5.5

Area of the triangle = 45.1 cm²

Calculating the area of the rectangle

Area of rectangle = Length × Width

Thus,  

Area of the rectangle = 16.4 × 7

Area of the rectangle = 114.8 cm²

Therefore,

The area of the composite figure = 45.1 cm² + 114.8 cm²

The area of the composite figure = 159.9 cm²

Hence, the area is 159.9 cm²

Learn more on Calculating the area of the composite figure here: https://brainly.com/question/10254615

#SPJ1

Answer: y=3x+0

Step-by-step explanation: rise (y) over run (x) would be 3/1, which is 3. The line passes through the origin (0,0) so its 0.

The two requirements for a discrete probability distribution are that the probabilities assigned to each possible outcome must be between 0 and 1 inclusive, and the sum of probabilities of all possible outcomes must be equal to 1.

There are two main requirements for a discrete probability distribution,

The probabilities assigned to each possible outcome must be between 0 and 1 inclusive. That is, the probability of each outcome must be a non-negative number, and the sum of probabilities of all possible outcomes must be equal to 1.

Each possible outcome must be mutually exclusive. That is, only one of the possible outcomes can occur on any given trial of the random experiment.

These two requirements ensure that the probabilities assigned to each outcome are valid and that the total probability space is complete, allowing us to make valid inferences and predictions about the outcomes of random events.

Learn more about discrete probability distribution here

brainly.com/question/17145091

#SPJ4

I have solved the question in general, as the given question is incomplete.

The complete question is:

What are the two requirements for a discrete probability distribution?

The solution to the compound inequality -3+b> 7 OR b +9 <17 is given as follows:

b < 8 or b > 10.

The inequality for this problem is defined as follows:

-3+b> 7 OR b +9 <17.

The or operation means that the we must solve each operation separately, and then the solution set to the compound inequality is given by the union of the solution set of each of the inequalities.

The solution set for the first inequality is given as follows:

-3+b> 7

b > 10.

The solution set for the second inequality is given as follows:

b + 9 < 17

b < 8.

Hence the solution for the entire inequality is of:

b < 8 or b > 10.

More can be learned about inequalities at https://brainly.com/question/30956956

#SPJ1

The second term of a geometric sequence of real numbers is -2 and the fifth term is 16, then the fourteenth term of real number is -8192.

In mathematics, a geometric series, also called a geometric sequence, is a sequence of non-zero numbers in which each term after the first is found by multiplying the previous term by a non-zero fixed number giving a common calling relation of ratio.

Given that:

In geometric sequence of real number is is -2

And The fifth term is 16.

According to the Question:

Let r  be  the common ratio

So

   (-2)r⁽⁵⁻²⁾  = 16

⇒ (-2)r³  = 16

⇒ r³ =  -16/2

⇒ r³ =  - 8

⇒ r   = -2

So the 14th term is

   (16)(-2)⁽¹⁴⁻⁵⁾

⇒ 16 (-2)⁹

⇒ 16 × (-512)  = -8192

Learn more about Sequence:

https://brainly.com/question/30262438

#SPJ4

The coordinates of D are: B. (2.5, 0.5).

The product of the slopes of CD and AB is: C. -1.

This shows that AB is perpendicular to CD. Therefore, C lies on the perpendicular bisector of AB.

In order to determine the midpoint of a line segment with two (2) endpoints, we would add each point together and divide by two (2).

Midpoint = [(x₁ + x₂)/2, (y₁ + y₂)/2]

Substituting the given parameters into the midpoint of a line segment formula, the midpoint of line AB is given by;

Midpoint AB = [(4 + 1)/2, (-2 + 3)/2]

Midpoint AB = [5/2, 1/2]

Midpoint AB = (2.5, 0.5).

5, 2

Next, we would determine the slopes of line segment CD and AB:

Slope (m) of CD = (0.5 - 2)/(2.5 - 5)

Slope (m) of CD = -1.5/-2.5 = 3/5

Slope (m) of AB = (-2 - 3)/(4 - 1)

Slope (m) of AB = -5/3 = 0.6

Product of the slopes = 3/5 × -5/3 = -3/3 = -1.

Read more on midpoint and perpendicular bisector here: https://brainly.com/question/17126053

#SPJ1

Answer:

a

Step-by-step explanation:

The probability that the person chosen is a woman is 0.51.

The probability that the person chosen favors pink or purple is 0.67.

The probability that a person that favors turquoise is a man is 0.66.

Probability is the odds that a random event would occur. The odds that the event occurs has a probability value that lies between 0 and 1. The more likely it is that the event would happen, the closer the probability value would be to 1.

The probability that the person chosen is a woman = number of women / total number of people = 152 / 300 =  0.51.

The probability that the person chosen favors pink or purple = (number of people who favor pink / total number of people) + (total number of people that favor purple / total number of people) = (50 /300) + (50 / 300) =  0.67.

The probability that a person that favors turquoise is a man = men who favor turquoise / total number of people who favor turquoise = 79/120 = 0.66

To learn more about probability, please check: https://brainly.com/question/13234031

#SPJ1

The two transformations applied to quadrilateral JKLM are rigid transformations, quadrilateral PQRS is congruent to quadrilateral JKLM, and the corresponding sides are proportional but not equal.

The dilation is a transformation in which all points are moved by the same scale factor, but the scale factor is different for each point. In this case, the dilation was centered at the origin and had a scale factor of . This means that all points were moved by the same scale factor of .

Quadrilateral PQRS is the image of quadrilateral JKLM after translating it 6 units down and 6 units to the right, followed by a dilation centered at the origin with a scale factor of . This means that quadrilateral PQRS is congruent to quadrilateral JKLM, and the corresponding sides are proportional but not equal.

In this case, the translation of quadrilateral JKLM was 6 units down and 6 units to the right.

For more questions related to Quadrilateral

https://brainly.com/question/26690979

#SPJ1

Answer:

Relating SSE to Other Statistical Data



To rewrite a number with a radical in the denominator without the radical, we can use the conjugate of the denominator. The conjugate of a binomial expression a + b is a - b, and the conjugate of a - b is a + b.

Suppose we have a number with a radical in the denominator, such as 1/√2. To rewrite this without the radical, we multiply the numerator and denominator by the conjugate of the denominator, which is

√2: 1/√2 = (1/√2) * (√2/√2) = √2/2

Note that the product of the denominator and its conjugate is always a difference of squares, which can be simplified to an integer without a radical.

To know more about denominator, here

brainly.com/question/7067665

#SPJ4

Answer:

1

Step-by-step explanation:

slope = rise/run = 1/1 = 1

Answer:

$85.47

Step-by-step explanation:

Before tax and before tip: $74

Tax is 5%.

5% of $74 = 0.05 × $74 = $3.70

Cost including tax (but not tip): $74 + $3.70 = $77.70

After tax but before tip: $77.70

Tip is 10%.

10% of $77.70 = 0.1 × $77.70 = $7.77

Total price after tax & tip:

$77.70 + $7.77 = $85.47

The volume of the composite figure is 837.33 cubic units.

The area or capacity of a cone is determined by its volume. A cone's circular base tapers from a flat base to a point known as the apex or vertex in three dimensions. A cone is made up of a collection of line segments, half-lines, or lines that link the apex—the common point—to each point on the base, which is on a plane without the apex. A cone may be thought of as a collection of irregularly shaped circular discs placed on top of one another with the ratio of their radii remaining constant.

The volume of any composite figure is the addition of the volume of all the shapes present in the figure.

Here, the composite solid is made of 2 cones and a cylinder.

The volume of cone is:

V = 1/3(πr²h)

For cone with height 12 and r= 4:

V = 1/3(π)(4)²(12)

V = 200.96 cubic units.

For cone with h = 8 and r = 4:

V = 1/3(π)(4)²(8)

V = 133.97

The volume of cylinder is:

V = πr²h

V = (3.14)(4)²(10)

V = 502.4 cubic units.

The volume of the composite solid is:

Total volume = 200.96 + 133.97 + 502.4

Total volume = 837.33 cubic units.

Hence, the volume of the composite figure is 837.33 cubic units.

Learn more about volume of cone here:

https://brainly.com/question/29767724

#SPJ1

Answer:

1.45 L

Step-by-step explanation:

Answer:

C) 60º, 60º, 120º, 120º

Step-by-step explanation:

We know the sum of all the angles in a rectangle is 360 degrees, whether it's irregular or not.

Given: x + 2x + 2x + x = 360

Calculate the linear equation, to find x.

x + 2x + 2x + x = 360

3x + 3x = 360

6x = 360  (Divide both sides by 6)

x = 60 degrees.

Then you can calculate the polygons.

x + 2x + 2x + x

For the first x, = 60.

Then for 2x, 60 * 2 = 120.

Then for 2x again, = 120.

Finally for the last x, = 60.

Therefore, the answer is C) 60º, 60º, 120º, 120º.

A. The capacity of most of the trimmer Sara sells is [tex]1\tfrac{1}{5}[/tex]

B. The total gas she needs to fill all trimmers is  [tex]$22 \frac{7}{8}[/tex]

Expressiοns are used extensively in mathematics, including arithmetic, calculus, and geοmetry. They are used in mathematical fοrmula representatiοn, equatiοn sοlutiοn, and mathematical relatiοnship simplificatiοn.

Part A

The capacity of most of the trimmer Sara sells is [tex]1\tfrac{1}{5}[/tex]

Part B

The total gas she needs to fill all trimmers is:

[tex]$\Rightarrow (1 \times 1\frac{1}{2}) + (5 \times 1\frac{5}{8}) + (1 \times 1\frac{7}{8} )+ (3 \times 2\frac{1}{8} ) + (2 \times 2\frac{1}{2} )[/tex]

⇒ [tex]$22 \frac{7}{8}[/tex]

Thus, The total gas she needs to fill all trimmers is  [tex]$22 \frac{7}{8}[/tex]

Learn more about expressions here:

brainly.com/question/30350742

#SPJ1

Answer:

The radius is approximately 14.003.

Step-by-step explanation:

Given:

Formulas for the semicircle:

Answer:

14 cm

Step-by-step explanation:

To find:-

Answer:-

We are here given that the perimeter of a semicircular disc is 72cm . We are interested in finding out the radius of the disc. Perimeter of a semicircular disc is given by,

[tex]:\implies \sf P = \pi r + 2r \\[/tex]

where r is the radius of the disc

Now on substituting the respective values, we have;

[tex]:\implies \sf 72cm = \pi r + 2r \\[/tex]

[tex]:\implies \sf 72cm = r(\pi + 2)\\[/tex]

[tex]:\implies \sf r =\dfrac{72}{\pi+2} cm \\[/tex]

[tex]:\implies \sf r =\dfrac{72}{3.14+2} cm \\[/tex]

[tex]:\implies \sf r = \dfrac{72}{5.14}\\[/tex]

[tex]:\implies \sf \pink{radius= 14.007\ cm } \\[/tex]

Hence the radius of the semicircular disc is approximately 14 cm .

The probability of waiting at least 26 minutes is 0.316. The average waiting time is 19 minutes.

Step 1:

The probability of waiting at least 26 minutes can be calculated by finding the area under the probability density function from 26 to 38:

P(waiting at least 26 minutes) = ∫26^38 (1/38) dt = [t/38] from 26 to 38

= (38/38) - (26/38) = 12/38 = 0.316

So the probability of waiting at least 26 minutes is 0.316 or approximately 0.316 rounded to 3 decimal places.

Step 2:

The average waiting time can be calculated by finding the expected value of the probability density function:

E(waiting time) = ∫0³⁸ t f(t) dt = ∫0³⁸ (t/38) dt

= [(t²)/(238)] from 0 to 38

= (38²)/(238) = 19

Therefore, the average waiting time is 19 minutes.

Learn more about probability here: brainly.com/question/30034780
#SPJ4

The given statements are true or false are shown below, about linear system has n variables and m equations, then the augmented matrix has n rows.

First, let's write how A and C look like.

A = [C|b], where b is the constant matrix.

(a) False.

Example

[tex]\left[\begin{array}{ccc}1&0&2\\0&1&3\\\end{array}\right][/tex]

We can see that z = t and so we have infinitely many solutions but there's no row of zeros.

(b) False.

Example

[tex]\left[\begin{array}{cc}1&0&0\1&1&0&0\\\end{array}\right][/tex]

Here; x1 = 1 and x2 = 1 is a unique solution and we have a row of zeros.

(c) True.

In the row-echelon form, the last row is either a row of zeros or a row that contains a leading 1. If the row has a leading 1, then there is a solution. Since we assume there is no solution, then the row must be a row of zeros.

(d) False.

Example

[tex]\left[\begin{array}{cc}1&3\\0&0\end{array}\right][/tex]

Here; x₁ = 1 − 3t and x2 = t. Thus, the system is consistent.

(e) True.

Suppose we have a typical equation in a system

а1x1 + A2X2 + ··· + anxn = b

Now, if b≠0 and x1 = x2 = ··· = x₂ = 0, then the system is Xn inconsistent. But, if b = 0, then we have a solution.

(f) False.

Example

[tex]\left[\begin{array}{cc}1&2&0&0\end{array}\right][/tex]

If a = 0, then it's consistent(infinitely many solutions) but if a 0, then it's inconsistent.

(g) Ture.

Since the rank would be at most 3 and this will lead to a free variable (4 columns in C and the rank is 3, so there is at leat 1 free variable). Thus, the system has more thatn one solution.

(h) True.

Because the rank is the number of leading 1's lying in different rows and A has 3 rows. Thus, the rank ≤ 3.

(i) False.

Because we could have a row of zeros in C and a leading 1 in A. In other words, a31 = a32 = A33 = A34 = 0 and c3 1. This makes the system inconsistent.

(j) True.

If the rank of C = 3, then there will be a free variable and this means the system is consistent.

Learn more about linear system:

https://brainly.com/question/30703986

#SPJ4

Complete question:

In each case either show that the statement is true, or give an example showing it is false. (a) If a linear system has n variables and m equations, then the augmented matrix has n rows. quations • ( *b) A consistent linear system must have infinitely many solutions. . (c) If a row operation is done to a consistent linear system, the resulting system must be consistent. (d) If a series of row operations on a linear system results in an inconsistent system, the original system is inconsistent.

Answer: 3,600

Step-by-step explanation:

1 kg. = 1000 g.

3.6 X 1000 = 3,600

Answer:

  C. RP = 4.5

Step-by-step explanation:

You want to know what condition is sufficient to show ∆ABC ~ ∆QPR, given  three sides and 2 angles in ∆ABC, and 2 sides in ∆QPR.

Similarity can be shown if all three sides are proportional, or if two angles are congruent.

The offered answer choices only list one angle, so none of those will work. The answer choice that makes the third side of ∆QPR be in the same proportion as the corresponding side of ∆ABC is the condition of interest.

  C. RP = 4.5

__

Additional comment

The side ratios in the two triangles are ...

  AB : BC : CA = 10 : 9 : 6

  QP : PR : RQ = 5 : PR : 3

For these ratios to be the same, PR must be half of BC, just as the other segments in ∆QPR are half their counterparts in ∆ABC.

Descriptive statistics are the most useful in life. Descriptive statistics provide information about a data set and can help to summarize and interpret data. Specifically, I find the mean and median to be the most useful.

Descriptive statistics involves the use of measures such as the mean, median, mode, and range, as well as graphical representations of the data, such as histograms, box plots, and scatter plots.

The mean is the average of a set of data and is useful for summarizing and interpreting data. For example, when I am studying for a test, I often use the mean of my practice test scores to understand my overall performance.

The median is the middle value of a set of data and is useful for understanding the spread of the data. For example, when I am tracking my monthly expenses, I often use the median to understand how much I am spending each month. By taking the median of my monthly expenses, I can get an idea of which expenses are taking up the most of my budget.

For more questions related to median

https://brainly.com/question/26177250

#SPJ1

Amari almost likely used "types of beverage" as that of the factor while creating the bar graph.

The bar graph makes it simple to compare various sets of data across various groups. The connection is depicted using two axes, with the discrete values with one axis and the categories on the other. The graph displays the key alterations in the data over time.

What distinguishes a bar graph from a histogram?

The visual depiction of categorical data is a bar graph. The visual depiction of quantitative data is called a histogram. Every pair of following bars is separated by an equal amount of space.

To know more about bar graph visit

brainly.com/question/30918720

#SPJ1

Answer:

Type of drink is the answer

Step-by-step explanation:

Answer:

Let's denote the number of adult tickets sold by "x" and the number of children's tickets sold by "y".

We know that the total number of tickets sold is 960, so:

x + y = 960

We also know the total amount collected, which is $11,920:

15x + 11y = 11,920

Now we have two equations with two unknowns, and we can solve for x and y. One way to do this is by using substitution. We can solve the first equation for x:

x = 960 - y

Then substitute this expression for x into the second equation:

15(960 - y) + 11y = 11,920

Expanding the brackets gives:

14,400 - 15y + 11y = 11,920

Simplifying:

4y = 2,480

y = 620

Now we can use this value of y to find x:

x = 960 - y = 960 - 620 = 340

Therefore, 340 adult tickets and 620 children's tickets were sold.

Answer:

Let's use a system of equations to solve the problem.

Let x be the number of adult tickets sold and y be the number of children's tickets sold.

We know that the total number of tickets sold is 960, so we can write:

x + y = 960

We also know that the total revenue from the ticket sales was $11,920. The revenue from the adult tickets is $15 times the number of adult tickets sold, and the revenue from the children's tickets is $11 times the number of children's tickets sold. So we can write:

15x + 11y = 11,920

We now have two equations with two unknowns, which we can solve using substitution or elimination. Let's use elimination:

Multiply the first equation by 11 to get 11x + 11y = 10,560

Subtract the second equation from the first to get:

15x + 11y - 15x - 11y = 11,920 - 10,560

Simplifying, we get:

4x = 1,360

Dividing both sides by 4, we get:

x = 340

So 340 adult tickets were sold.

Substituting this value back into the first equation, we get:

340 + y = 960

Solving for y, we get:

y = 620

So 620 children's tickets were sold.

Therefore, there were 340 adult tickets sold and 620 children's tickets sold.