Solution :
It is given that an application is used to transmit a data record form one building to another building in the same city, The length of the data records is 500 bytes. and the speed is 0.5 second for each record.
a). So for this application, it is recommended to use a synchronous connection between the two building for data transfer as the rate data transfer is high and it will require a master configuration between the two.
b). In a synchronous connection, 500 bytes of data can be sent in a time of 0.5 sec for each data transfer. So for this the line of transmission can be either wired or wireless.
When performing the ipconfig command, what does the following output line depict if found in the tunnel adapter settings?
IPv6 Address: 2001:db8:0:10:0:efe:192.168.0.4
a. IPv6 is disabled.
b. The addresses will use the same subnet mask.
c. The network is not setup to use both IPv4 and IPv6.
d. IPv4 Address 192.168.0.4 is associated with the global IPv6 address 2001:db8:0:10:0:efe
Answer:
d. IPv4 Address 192.168.0.4 is associated with the globe IPv6 address 2001:db8:0:10:0:efe
Explanation:
The adapter setting will be associated with the global IP address. When Ipconfig command is operate the IP address finds the relevant domain and then address will use a different subnet. The network will use both IPv4 and IPv6 subnets in order to execute the command.
In the tunnel adapter settings, when performing the ipconfig command, the given output line depicts: D. IPv4 Address 192.168.0.4 is associated with the global IPv6 address 2001:db8:0:10:0:efe.
What is a tunnel adapter?A tunnel adapter can be defined as a virtual interface which is designed and developed to encapsulate packets as a form of tunnel or virtual private network (VPN) protocol while sending them over another network interface.
In Computer networking, an output line of "IPv6 Address: 2001:db8:0:10:0:efe:192.168.0.4" in the tunnel adapter settings simply means that an IPv4 Address 192.168.0.4 is associated with the global IPv6 address 2001:db8:0:10:0:efe.
Read more on IP address here: https://brainly.com/question/24812743
Which of the following statements about the relationship between hardware and software is true? a) Hardware can be present in intangible form. b) A flash drive is an example of software. c) Software and hardware can act independently of each other. d) Software consists of instructions that tell the hardware what to do.
Answer:
C
Explanation:
The statements about the relationship between hardware and software that is true is: D. Software consists of instructions that tell the hardware what to do.
A hardware can be defined as the physical components of an information technology (IT) system that can be seen and touched such as:
RouterSwitchKeyboardMonitorMouseConversely, a software refer to a set of executable codes (instructions) that is primarily used to instruct a computer hardware on how it should process data, perform a specific task or solve a particular problem.
In conclusion, a software consist of a set of executable codes (instructions) that tell a computer hardware what to do.
Read more on hardware here: https://brainly.com/question/959479
Given that n refers to a positive int use a while loop to compute the sum of the cubes of the first n counting numbers, and associate this value with total. Use no variables other than n, k, and total in python
Answer:
The program in Python is as follows:
n = int(input("n:"))
total = 0
for k in range(1,n+1):
total+=k**3
print(total)
Explanation:
This gets input for n
n = int(input("n:"))
This initializes total to 0
total = 0
This iterates from 1 to n
for k in range(1,n+1):
This adds up the cube of each digit
total+=k**3
This prints the calculated total
print(total)
Write a python program that will accept monthly salary amounts greater than zero but less
than or equal to 400,000.00 until the user enters the character ‘e’. After the user
enters the character ‘e’, calculate the net pay of all salaries by deducting income tax at
a rate of 25%, pension of 5% and housing contribution of 2% from each salary
entered. Additionally, print the number of salaries that were entered in the program
along with the number of salaries that exceed 300,000.00
write a python program
The English alphabet has 26 letters starting from A and ending with Z. If we map the
first 26 numbers i.e 1 through to 26 to each letter in the alphabet, we could encode
messages using numbers. For example, 123 could be represented as ‘ABC’ and 26 could
be the letter ‘Z’. Write a program that accepts 10 integers from the user ranging from 1
- 26. After accepting the values, the program should determine and print the
corresponding letters.
It won't save the answer. Maybe I can give it to you in the comment.
You can message me if you want. I cannot post the answer in the comment too:(
In C complete the following:
void printValues ( unsigned char *ptr, int count) // count is no of cells
{
print all values pointed by ptr. //complete this part
}
int main ( )
{
unsigned char data[ ] = { 9, 8, 7, 5, 3, 2, 1} ;
call the printValues function passing the array data //complete this part
}
Answer:
#include <stdio.h>
void printValues ( unsigned char *ptr, int count) // count is no of cells
{
for(int i=0; i<count; i++) {
printf("%d ", ptr[i]);
}
}
int main ( )
{
unsigned char data[ ] = { 9, 8, 7, 5, 3, 2, 1} ;
printValues( data, sizeof(data)/sizeof(data[0]) );
}
Explanation:
Remember that the sizeof() mechanism fails if a pointer to the data is passed to a function. That's why the count variable is needed in the first place.
(CO 4 and 5) Create a program that will read in a list of test scores from the user and add them to a list. Ask the user in between each score if they want to continue (y/n). Display all of the scores entered and the total score at the end. Using the code below, put the code in the proper order Sample output: Welcome to the Test Score Program Add score: 88.45 Do you want to continue
Answer and Explanation:
Using Javascript:
function AddScores(){
Window.alert("Welcome to the Test Score Program");
var ScoreList= new Array();
ScoreList.push(Prompt("Add Score"));
var WhatNext= Confirm("do you want to continue?");
If(WhatNext===true) {
do{
ScoreList.push(Prompt("Add Score"));
}
While(
Confirm("do you want to continue?")===true;);
}
Alert(ScoreList);
Alert(ScoreList.reduce(function(a,b){return a +b};,0);)
}
AddScores();
From the above code in javascript programming language, we have created a list ScoreList and added elements to it using push method of the array object and a do...while loop that checks the condition and then adds the user's input to the array. We then alerted the array to the screen and then summed up the array elements and also alerted to the screen.
The following method is intended to return true if and only if the parameter val is a multiple of 4 but is not a multiple of 100 unless it is also a multiple of 400. The method does not always work correctly public boolean isLeapYear(int val) if ((val 4) == 0) return true; else return (val & 400) == 0; Which of the following method calls will return an incorrect response?
A .isLeapYear (1900)
B. isLeapYear (1984)
C. isLeapYear (2000)
D. isLeapYear (2001)
E. isLeapYear (2010)
Answer:
.isLeapYear (1900) will return an incorrect response
Explanation:
Given
The above method
Required
Which method call will give an incorrect response
(a) will return an incorrect response because 1900 is not a leap year.
When a year is divisible by 4, there are further checks to do before such year can be confirmed to be a leap year or not.
Since the method only checks for divisibility of 4, then it will return an incorrect response for years (e.g. 1900) that will pass the first check but will eventually fail further checks.
Hence, (a) answers the question;
what are Manuscript signs
Answer: See explanation
Explanation:
Manuscript signs, refers to the marks or the symbols that are used within a manuscript in order to show the necessary corrections which should be made during the preparation of a document.
Manuscript formatting is vital as it makes the manuscript easier to assess. In a situation whereby manuscripts are poorly formatted, it can be turned down by agents and publishers.
1. Write a generic method that compares its 2 arguments using the equals method and returns true if they are equal and false otherwise. Ensure that the name of your method includes your last name.
Answer:
Explanation:
The following piece of code is written in Java. It creates the method as requested that takes in two generic objects and compares them using the .equals() built in Java method. This method will return True if the objects are identical or False if they are not. A test case is used in the code and the output can be seen in the attached image below.
public static <T> boolean comparePerez(T a, T b) {
return a.equals(b);
}
Select all that apply to Enums: Group of answer choices While mainly a readability feature, we can technically use Enum to do things like spoof a boolean type in C allowing us some level of functionality Enums let us build a series of any kind of constant Enums allow us to print names for integers instead of numbers Enums are great for representing states and other common constants like colors Enums let us specifically value each constant we create Flag question: Question 59 Question 59
Answer:
-- While mainly a readability feature, we can technically use Enum to do things like spoof a Boolean type in C allowing us some level of functionality.
-- Enums are great for representing states and other common constants like colors.
-- Enums let us specifically value each constant we create.
Explanation:
Enums is a part of a programming language which helps a developer or a programmer to defined a set of the named constants. Using the enums will help in making it easier to document the intent and also to create set of distinct cases.
Option 1 is applicable as in the Boolean there are only TRUE and FALSE values. By using enum one can add more state like that of being difficult or normal or easy.
Option 4 is applicable because enums are used to represent various states and also other constants.
Option 5 is also applicable they allow the developer to create each value constant.
NO LINKS
Write a C++ program to accept a 5 digit integer and to validate the input based on the following rules.
Rules
1) The input number is divisible by 2. 2) The sum of the first two digits is less than last two digits. if the input number satisfies all the rules, the system prints valid and invalid, otherwise,
Example 1:
Enter a value: 11222
Output: Input number is valid
Example 2:
Enter a value: 1234
Output: Input number is invalid
Answer:
#include <iostream>
#include <string>
#include <regex>
using namespace std;
int main()
{
cout << "Enter a 5-digit number: ";
string number;
cin >> number;
bool valid = regex_search(number, regex("^\\d{4}[02468]$"));
if (valid) {
valid = stoi(number.substr(0, 1)) + stoi(number.substr(1, 1))
< stoi(number.substr(3, 1)) + stoi(number.substr(4, 1));
}
cout << number << (valid ? " is valid" : " is invalid");
}
Explanation:
Regular expressions can do all of your checking except for the sum of digits check. The checks are i.m.o. easiest if you don't treat the input as a number, but as a string with digits in it.
The regex means:
^ start of string
\d{4} exactly 4 digits
[02468] one of 0, 2, 4, 6 or 8 (this is what makes it even)
$ end of string
An entertainment application would most likely do which of the following?
A. allow users to watch popular movies and TV shows
B. connect users with social and business contacts
C. confirm users' travel plans
D. teach users a new language
Answer:
A is the answer to this question
Answer:
A. allow users to watch popular movies and TV shows
Explanation:
Which of the following statement is true? Single choice. (2 Points) Views are virtual tables that are compiled at run time All of the Mentioned Views could be looked as an additional layer on the table which enables us to protect intricate or sensitive data based upon our needs Creating views can improve query response time
Answer:
All of the mentioned views could be looked as an additional layer in the table which enables us to protect intricate or sensitive data based upon our needs.
Explanation:
View is a virtual table which executed a pre compiled query. It is a table in which selective portion of the data can be seen from one or more tables. Queries are not allowed in indexed views and adding column is not possible. Views can be looked as an additional layer in the virtual table which protects sensitive data.
in order to switch from paper to digital medical records the hospital bought in several individuals to introduce and implement the tools needed to organize the files . These individuals would best be described as
Available options are:
A. Technical champions
B. Engaged filmmakers
C. Business partners
D. Compliance champions
Answer:
Technical champions
Explanation:
Given that a "Technical Champion" is someone whose responsibility is to introduce and perform the role of enabling the use of technology, development of skills across the organization, and strengthen communication between Information Technology and the staff or employees.
Hence, in this case, considering the job descriptions described in the question above, these individuals would best be described as TECHNICAL CHAMPIONS
calculateAverageSalary(filename): Returns the average salary of all employees rounded down to 2 decimal points highestHireMonth(filename): Returns the month (integer) during which most hires were made over the years getMonth(date): Helper function to extract and return the month number from a date given as a string input of format MM/DD/YY. Return type should be an int.
Answer:
An extract from the answer is as follows:
for i in salary:
total_salary+=float(i)
count+=1
return round(total_salary/count,2)
def getMonth(date):
ddate = []
for i in date:
ddate.append(i.split('/')[0])
mode = int(max(set(ddate), key=ddate.count))
return mode
def highestHireMonth(filename):
month = []
See explanation for further details
Explanation:
Given
Attachment 1 completes the question
The complete answer could not be submitted. So, I've added it as an attachment.
See attachment 2 for program source file which includes the main method.
Comments are used to explain difficult lines
Assume that a file contains students’ ids, full names, and their scores (Assignments grade, quizzes grade, Midterm grade, Practical exam grade, and final exam grade) (each column is separated by $). You are required to write a C program to do the following:
• Using the concept of parallel arrays create records for students with above attributes (id, full name, score).(you are not allowed to use structure)
• Ask the user to enter the input file name and read it (suppose that, there are different files you could read data from). Read the data from the file and store it in record for students, which has IDs, Names, and Scores. The IDs should be declared as integers, the Names as a two-dimensional array of characters and the Scores as doubles. Assume that the maximum length of full name of any student is 50 characters. Also, you may assume that there will be No more than a 1000 student records in the file.
• Calculate the final grade as the flowing:
Grade= (Assignment)*15%+(Quizzes) *15%+(Midterm exam) *25%+(Practical Exam)
*10%+(Final) *35% Assuming that data in files are arranged in same order of the above equation with respect to grades
Hint: read form file, calculate the final score, and store it in the record before going to the next step.
• Display the following menu to the user and read the entered choice:
1) Sort data in ascending order according to students’ IDs and then display it.
2) Sort data in ascending order according to students’ names and then display it.
3) Sort data in descending order according to students’ scores and then display it.
Note: After running any of the above menus items, ask the user if he/she would like to save the current result, if so, prompt user to enter file name.
4) Ask the user to enter a student ID and display his score
5) Ask the user to enter a student name and display his score
6) Exit the program
The program should keep displaying the menu until the user selects to exit from the program.
Implement each of the first five menu options as a separate function.
The attached file “data.txt” is for test.
4. All of the following statements are true EXCEPT one. Which
statement is NOT true?
Select the best option.
Communication occurs between senders and receivers within a context by messages sent
through visual and auditory channels.
Communication includes both the verbal and nonverbal messages sent and received.
The goal of effective communication is mutual understanding.
You can improve your communication by improving your understanding of yourself, others,
and the context of the communication.
When you are listening to another person speak, you can avoid sending any messages by not
speaking and not making eye contact.
Answer:
D
Explanation:
Communication are happen when 2 people are response each other
It is not true that when you are listening to another person speak, you can avoid sending any messages by not speaking and not making eye contact. The correct option is 4.
What is communication?The process of communicating information, concepts, ideas, or sentiments between two or more people through a variety of means and channels, including verbal and nonverbal communication, is referred to as communication.
It is a myth that you may avoid transmitting any messages when you are listening to someone else speak by remaining silent and avoiding eye contact.
Your body language and nonverbal communication, such as your facial expressions and eye contact, can still convey information to the speaker even if you are not replying verbally or establishing eye contact.
Hence, even if a message is unintended or nonverbal, all types of communication entail sending and receiving messages.
Thus, the correct option is 4.
For more details regarding communication, visit:
https://brainly.com/question/22558440
#SPJ2
Your question seems incomplete, the probable complete question is:
All of the following statements are true EXCEPT one. Which
statement is NOT true?
Select the best option.
Communication occurs between senders and receivers within a context by messages sent through visual and auditory channels.Communication includes both the verbal and nonverbal messages sent and received. The goal of effective communication is mutual understanding.You can improve your communication by improving your understanding of yourself, others, and the context of the communication.When you are listening to another person speak, you can avoid sending any messages by not speaking and not making eye contact.A Key Factor in Controlling Your Anger Is Using Passive behaviour.T/F
Answer:
The answer is "True".
Explanation:
Assertiveness means that others are encouraged to be open, honest about their thoughts, wishes and feelings so how they can act properly. Assertive behavior: be open and communicate wishes, ideas and feelings, as well as encourage others to do likewise. Please visit our Emotional Regulation page. A major aspect is the ability to control your anger. Once you are quiet or aggressive, work very hard.
space bar in computer
Answer: Its the one in the middle the really long thingy it looks like a rectangle
Explanation:
ITS IN THE MIDDLE
Compare and contrast the older multiplexing techniques such as frequency division and time division multiplexing with the newer techniques such as discrete multitone and orthogonal frequency division multiplexing. What appears to be the trend in these newer protocols?
Answer:
As compared to new multiplexing techniques, older techniques like FDM frequency-division multiplexing (FDM) may be a technique by which the entire bandwidth available during a communication medium is split into a series of non-overlapping frequency sub-bands, each of which is employed to hold a separate signal.
Explanation:
Especially used for Radio and tv Broadcasting and TDM ( Time-division multiplexing (TDM) may be a method of transmitting and receiving independent signals over a standard signal path by means of synchronized switches at each end of the cable in order that each signal appears on the road only a fraction of your time in an alternating pattern, especially used for telegraphy) are simple; they'll be suffering from noise and their transmission speeds are high. New techniques are far more complex, they will be suffering from more noise and transmission speeds are very high as compared to older techniques.
Design a class named largeIntegers such that an object of this class can store an integer of any number of digits. Add operations to add, subtract, multiply, and compare integers stored in two objects. Also add constructors to properly initialize objects and functions to set, retrieve, and print the values of objects. Write a program to test your class. g
Answer:
Here the code is given as follows,
Explanation:
Code:
import java.util.Scanner;
//created class named largeintegers
class largeintegers{
//class can hold a long number
long number;
//constructor to set number
largeintegers(long number){
this.number=number;
}
//getNumber method to get number
long getNumber(){
return number;
}
//below are some basic operations
long addition(long num1,long num2){
return num1+num2;
}
long subtract(long num1,long num2){
return num1-num2;
}
long multiply(long num1,long num2){
return num1*num2;
}
boolean compare(long num1,long num2)
{
return num1>num2;
}
public static void main(String[] args) {
//declared to long numbers
long number1,number2;
//scanner class to take user input
Scanner sc= new Scanner(System.in);
//taking input numbers
System.out.println("Enter a Number ");
number1=sc.nextLong();
System.out.println("Enter 2nd Number :");
number2=sc.nextLong();
//created two objects
largeintegers object=new largeintegers(number1);
largeintegers object2=new largeintegers(number2);
//displaying two numbers
System.out.println("Entered Numbers ");
System.out.println(object.getNumber());
System.out.println(object2.getNumber());
//calling basic methods using created objects
System.out.println("Some Operations on Given two Numbers ");
System.out.println("Addition:"+object.addition(object.getNumber(), object2.getNumber()));
System.out.println("Subtraction:"+object.subtract(object.getNumber(), object2.getNumber()));
System.out.println("Multiplication:"+object.multiply(object.getNumber(), object2.getNumber()));
System.out.println("Comparison:");
if(object.compare(object.getNumber(), object2.getNumber())==true)
{
System.out.println("First Number is Greater than Second Number ");
}
else
{
System.out.println("Second Number is Greater than First Number ");
}
sc.close();
}
}
Output:-
Use the drop-down menus to complete the steps for rearranging the layout of a form.
1. Open the form in
✔ Design
view.
2.
✔ Press Ctrl+A
to highlight all of the fields.
3. Under Form Design Tools, select the
✔ Arrange
tab.
4. Choose the Remove Layout button.
5. Reorder and arrange the layout as desired.
6. Review the changes in the
✔ Layout
view.
7. Click Save.
Just did it.
Answer:
1. Open the Form
2. Arrange tabs
3. Layout view
4. Reoder and arrange the Layout as desired
5. Press Ctrl + A
6. Choose the remove Layout button
7. Click Save
I am not sure
The complete steps for rearranging the layout of a form are in the order:
1, 2, 3, 4, 5, 6, and 7.What is a form layout?A form layout is the arrangement of all elements, components, and attributes of your form and the placement of the form on a specific page.
When rearranging the layout of the form, the steps to take are as follows:
Open the form in Design View (this means that the form needs adjustment and rearrangement.Press Ctrl+A (this control all function) helps to highlight all the features in the form layout fields.Under Form Design Tools, select the Arrange tab.Choose the Remove Layout button.Reorder and arrange the layout as desired.Review the changes in the Layout view.Click Save.Learn more about form layout arrangement here:
https://brainly.com/question/9759966
#SPJ2
As a basic user of SAP Business One, which feature of the application do you like most?
Answer:
I like the software most because it is completely for the sales department. I am very satisfied with what this software provides since I work as a sales specialist.
Explanation:
As an internal auditor, I first have to check and make sure the business is going through all reports and operations and that SAP Business One has helped me a lot with reporting features. I'm a huge fan of SAP Business One. And how this software is incredibly fully integrated when an accountancy provider creates a new customer name or adds a new item in every module, and the non-duplicate data feature secures the master data from any duplicate item.
Intuitive sales quotation and sales order functions help salespeople to develop deals that they can conclude. The mobile app adds to the software's usefulness fantastically.
In general, the system has a good monetary value. I would recommend it to everyone involved in the decision-making process and it is my favorite.
1) It is possible to email a document
directly from the Word application.
O FALSE
O TRUE
Answer:
True
Explanation:
In the tiger exhibit at the zoo each of 24 tigers eat 26 lb of food each day how much pounds of food do tigers consume in a week?? answer this as fast as you can!!
Answer:
182 pounds of food
Explanation:
१८. तलका शीर्षकमा १५० शब्दसम्मको निबन्ध लेख्नुहोस् :
(क) सुशासन र विकास
Answer:
n
Explanation:
Answer:
kkkkkkkkikkkkkkkkkkkiikkiiii
Using the celsius_to_kelvin function as a guide, create a new function, changing the name to kelvin_to_celsius, and modifying the function accordingly. Sample output with input: 283.15 10.0 C is 283.15 K 283.15 K is 10.0 C 1 def celsius_to_kelvin value.celsius): value_kelvin 0.0 value_kelvin - value.celsius + 273.15 return value kelvin DIO! 5 7. Your solution goes here 9 value c - 10.0 10 print(value.c, Cis', celsius.to kelvin(value.c), 'K) 12 value floatinput ) 13 print(value, Kis', kelvin_to_celsius(value. ). 'C"> Run
Answer:
The function is as follows:
def kelvin_to_celsius(value_kelvin):
value_celsius = 0.0
value_celsius = value_kelvin - 273.15
return value_celsius
Explanation:
This defines the function
def kelvin_to_celsius(value_kelvin):
This initializes value_celsius to 0
value_celsius = 0.0
This calculates value_celsius
value_celsius = value_kelvin - 273.15
This returns the calculated value_celsius
return value_celsius
List the four workplace trends discussed in the lecture.
Answer:
The global economy, teamwork, technology, and diversity
Answer:
Trends in the workplace are constantly evolving and the latest trends are tough to maintain. Ten years ago, employers did not care about open businesses, advantages like ping pong tables and lunches on Fridays, or standing desks and unbounded time off. As times change, however, companies have to adopt trends to increase productivity and employee involvement in the workplace.
Explanation:
Global economy: The global economy refers to the worldwide interconnected economic activities between several countries. These economic activities could impact the countries concerned either positively or negatively.There are several features in the global economy, for example:
Globalization.International trade.International finance.Global investment.TEAMWORK: "To work together with a group of people to achieve an objective. Teamwork is often an important part of a company, as colleagues often have to work together well and to try their best in all circumstances. Work in a team means that, despite any personal conflicts between people, people will try to cooperate, use their individual abilities, and provide constructive feedback."It is selfless teamwork. It concentrates on the ultimate objective. Teamwork is based on the idea that the whole exceeds the sum of its components. It's the traditional idea of "one plus one is equal to three." Personalities and the ability to create personal conflicts are different. However, the differences between the members of the team become strengths and goals, if the whole team focuses on doing great work.
TECHNOLOGY: The skills, methods, and processes used to achieve objectives are technology. The technology to use is:
Manufacture products and servicesachieve objectives such as scientific research or sending a moon spaceshipSolve issues like sickness or starvationWe already do things, but easier.Knowledge of how to do things maybe technology. Embedding machines are examples. This enables others to use the machines without knowing how they function. By taking something, changing it, and producing results, the technological system uses the technology. They are also known as systems of technology.
Developing and using fundamental tools is the simplest form of technology. The discovery of fire and the Revolution made food more readily available. Additional inventions such as the ship and the wheel have helped people and themselves to transport goods. IT, like the printer, the phone, and the internet, has led to Globalization.
DIVERSITY:Diversity is a range of differences in the human race, ethnicity, sexuality, age, social class, physical capacity or attributes, religious or ethical values systems, nationality, and political faith.
Inclusion is participation and empowerment, which recognize everybody's inherent worth and dignity. An included university supports and promotes the sense of belonging; respects its members' talents, beliefs, backgrounds, and livelihoods. They respect and practice them.
Answer:
The global economy, teamwork, technology, and diversity
Explanation:
You trained a binary classifier model which gives very high accuracy on thetraining data, but much lower accuracy on validation data. The following maybe true:
a. This is an instance of overfitting.
b. This is an instance of underfitting.
c. The training was not well regularized.
d. The training and testing examples are sampled from different distributions.
Answer:
a. This is an instance of overfitting.
Explanation:
In data modeling and machine learning practice, data modeling begins with model training whereby the training data is used to train and fit a prediction model. When a trained model performs well on training data and has low accuracy on the test data, then we say say the model is overfitting. This means that the model is memorizing rather Than learning and hence, model fits the data too well, hence, making the model unable to perform well on the test or validation set. A model which underfits will fail to perform well on both the training and validation set.
Create a method called nicknames that passes an array as a parameter. Inside the method initialize it to hold 5 names of your choice. Use the for each enhanced loop to print the elements of the array.
//======METHOD DECLARATION=========//
//method name: nicknames
//method return type: void
//method parameter: an array reference
public static void nicknames(String [] names){
//initialize the array with 5 random names
names = new String[] {"John", "Doe", "Brian", "Loveth", "Chris"};
//using an enhanced for loop, print out the elements in the array
for(String n: names){
System.out.print(n + " ");
}
}
Explanation:
The program is written in Java. It contains comments explaining important parts of the code. Kindly go through these comments.
A few things to note.
i. Since the method does not return any value, its return type is void
ii. The method is made public so that it can be accessible anywhere in and out of the class the uses it.
iii. The method is made static since it will most probably be called in the static main method (at least for testing in this case)
iv. The method receives an array of type String as parameter since the names to be stored are of type String.
v. The format of initializing an array manually should follow as shown on line 7. The new keyword followed by the array type (String), followed by the square brackets ([]) are all important.
vi. An enhanced for loop (lines 9 - 11) is a shorthand way of writing a for loop. The format is as follows;
=> The keyword for
=> followed by an opening parenthesis
=> followed by the type of each of the elements in the array. Type String in this case.
=> followed by a variable name. This holds an element per cycle of the loop.
=> followed by a column
=> followed by the array
=> followed by the closing parenthesis.
=> followed by a pair of curly parentheses serving as a block containing the code to be executed in every cycle of the loop. In this case, the array elements, each held in turn by variable n, will be printed followed by a space.
A complete code and sample output for testing purposes are shown as follows:
==================================================
public class Tester{
//The main method
public static void main(String []args){
String [] names = new String[5];
nicknames(names);
}
//The nicknames method
public static void nicknames(String [] names){
names = new String[] {"John", "Doe", "Brian", "Loveth", "Chris"};
for(String n: names){
System.out.print(n + " ");
}
}
}
==================================================
Output:John Doe Brian Loveth Chris
NB: To run this program, copy the complete code, paste in an IDE or editor and save as Tester.java
