The command you would use to see which boot target is set as the default is: systemctl get-default.
What is systemctl?Systemctl is a command line utility used to control the state of services and daemons running on Linux systems. It can be used to start, stop, restart, enable, disable and check the status of services and daemons. It is the primary tool for managing services and daemons on Linux systems and is included with most major distributions. Systemctl is part of the systemd project, which provides a suite of tools for managing systems and services.
This command will show you which target is currently set as the default. If the target being returned is not multi-user.target, then you can use the command systemctl set-default multi-user.target to set it as the default. Once the default has been set, you can then use the command systemctl isolate multi-user.target to ensure that the system boots to the multi-user.target unit each time it is rebooted.
To know more about systemctl click-
https://brainly.com/question/30048647
#SPJ4
Kristy just received a laptop from her employer so she can work from home. She wonders if she can also use the laptop for personal activity, such as streaming movies. What documentation should Kristy check to find the answer to her question?
A. Acceptable use policy (AUP)
B. Knowledge base
C. Code of conduct
D. Warranty
Answer:
A
Explanation:
Acceptable use policy
maybe
you need to limit the impact of a security breach for a particular file server with sensitive company data. which strategy would you employ? answer containment segmentation isolation soar
A segmentation technique can be used to mitigate the impact of a security compromise on a specific file server containing critical company data.
What are data analysis segmentation techniques? A segmentation technique can be used to mitigate the impact of a security compromise on a specific file server containing critical company data.This adds another layer of security for the overall health of your network.To prevent viruses from spreading, separate your backup from other devices on your network.A segmented network also has the following advantages:If your network becomes contaminated, separating your backups will keep them clean and usable. By putting suitable firewall rules around the backup interface, only essential communication is allowed through.In essence, threat actors find it difficult to attack targets that they are ignorant of or cannot access.A recovery test should be performed every six months to a year as a best practice step, in addition to isolating your backups from the rest of your network.It will act as a full test restore in an isolated environment with mission-critical VMs such as file servers, ERP servers, and so on.To learn more about segmentation technique refer
https://brainly.com/question/29807587
#SPJ4
in step 5 of this activity, you created a data frame onlineta city hotels v2. what is the lead time in the first row created in this data frame?
Note that in order to identify the Lead Time of the first row of a data frame, you need to use the iloc[] attribute.
You can use the iloc[] property in the Pandas library to select specific rows or columns from a DataFrame. For instance, you can use iloc[0] to retrieve the first row of a DataFrame as a Pandas Series.
A DataFrame is a data structure that organizes data into a table with rows and columns. It is similar to a spreadsheet and is widely used in data analytics because it is easy to work with and allows for flexible data storage and manipulation.
Learn more about Data Frame:
https://brainly.com/question/28448874
#SPJ1
a wireless access point configured to use wired equivalent privacy (wep) is an example of which kind of vulnerability? answer unpatched software default settings weak security configurations zero-day exploit
Weak security settings include those that employ access control privacy (wep) on wireless access points.
What is wifi, for instance?A number of these terms may be familiar to you already: Radio and television communication, radar, gsm, global navigation systems (GPS), WiFi, Nfc, and rf are examples of "wireless" technology. identification, all of which have drastically diverse applications in various circumstances.
Which gadget is wireless?There is some form of network connectivity on a wireless device. If a laptop or PDA had a wireless modem, they would also be wireless, much like a mobile phone. Software are mobile when they connect to a network and exchange the data with it.
To know more about Wireless visit :
https://brainly.com/question/29730597
#SPJ4
javascript can be used for a. validation of data entered by a user b. any or all of the above c. computations based on user input d. changing the look and feel of a web page
Javascript can be used for b. any or all of the above .
What is JavaScript used for?Making interactive web pages is possible with JavaScript, a text-based computer language used both on the client-side and server-side. JavaScript adds interactive aspects to online sites that keep users interested, whereas HTML and CSS are languages that provide web pages structure and design.Given that JavaScript is the most widely used programming language in the world, it should come as no surprise that it is one of the most in-demand talents in the current web development market. Seventy-two percent of businesses are eager to employ JavaScript specialists, according to the Devskiller IT Skills and Hiring Report 2020.Despite being more sophisticated than HTML, JavaScript allows you to write useful code far faster than it would take you to master the proper HTML markup for web pages. However, compared to HTML, learning everything that JavaScript is capable of will take far more time.Learn more about JavaScript refer to :
https://brainly.com/question/29846946
#SPJ4
Issue: How to fix "Application failed to start because no Qt platform plugin could be initialized" error in Windows?Recently, after a Windows update, I was unable to get OneDrive to work. Whenever my PC boots, I receive an error "Application failed to start because no Qt platform plugin could be initialized." Any advice on how to deal with this issue?
Many applications, including OneDrive, Designer, Python, etc., might provide the "this programme failed to start because no Qt platform plugin could be initialized" issue. Issue solved after successful window update.
How to Fix the “No Qt Platform Plugin Could Be Initialized” Error?Third-party software conflicts are one of the potential causes of the "this programme failed to start Qt platform Windows" issue. You can conduct a clean boot if you're not sure which programme is creating the dispute (click on the Hyperlink to know the detailed steps). Uninstall the conflicting software once you've identified it, then check to see if the issue has been resolved.When your programmes are operating, damaged system files might occasionally result in a number of errors and problems, including the "no Qt platform plugin could be initialised" error. To verify system files, we advise you to conduct an SFC scan or DISM.Reinstalling the application may assist in resolving the issue, as the error notice suggests.Learn more about clean boot refer to :
https://brainly.com/question/28082089
#SPJ4
T/F By default margins are set to Narrow Margins.
True
O False
By default margins are set to Narrow Margins is false.
What are margins in writing?It is not necessarily true that margins are set to narrow by default in all software or applications. The default margin settings can vary depending on the specific software or application being used, as well as the user's preferences and settings.
In some cases, the default margin setting may be narrow, while in other cases it may be wider. It is generally a good idea to check the margin settings in the software or application that you are using to ensure that they are set to your desired width. If you need to change the margin settings, you can usually do so by accessing the "Page Setup" or "Print" options in the software or application's menu.
Learn more about margins from
https://brainly.com/question/28579662
#SPJ1
write a program asking for the user to input his name and marks in computer. If marks are greater than 40,then display a message saying you have passed in computer. otherwise you display you have failed in computer.
Answer: We can enter the mark into our c program and the script will try to find out the grade by using a series of else if condition checking. Each if else condition checks for a mark for a particular grade and if it is TRUE then all other checkings ( else if ) are omitted.
Getting the Grade by using input mark in C programming by using if else condition check
this content may violate our content policy. if you believe this to be in error, please submit your feedback — your input will aid our research in this area.
Answer:
This question can have both answers that is yes as well as no.
1.Yes, it can serve as an editor who completes your content and ensures it will read well to others.
2. No, the editor should have tracked changes which would have shown you where they would apply recommended edits.
Explanation:
blunk is a service that allows users to send updates through posts that contain only a few words. these updates are sent to the users who have signed up to receive them. blunk can be regarded as a(n) .
The help of the service Blunk, users may share updates via posts just with a few words. Users who have subscribed to receive these updates are informed about them. Blunk is equal to a microblog.
What does the term "user" mean?A users is anyone who employs or makes use of a certain object, such as a smoker or a website user. You are a Vocabulary.com user if you are reading this. Congrats! A user is one who employs or makes use of something, which is what it means to utilize something.
What does a relationship user look like?It indicates that one individual is consuming overly whilst the other is giving everything. — Dr. Meghan Marcum The relationship's power dynamics are thrown off by it. Both partners would be in charge of giving their partner assistance, trust, and emotional safety in a healthy relationship.
To know more about User visit :
https://brainly.com/question/13122952
#SPJ4
true or false? in an incremental backup, you start with a full backup when network traffic is light
Achieve safety for everybody. Having everyone safe is the first important step in a disaster recovery strategy. The second stage is responding to the disaster before moving forward with recovery, and the third and final step is carrying out the DRP, which includes getting in touch with all parties involved.
In terms of incremental backup, which of the following statements is true?
The solution is to only save newly modified files. Solution: This technique allows you to create backups of system files or data that have recently changed or been added since the last backup. Option C is the right choice, so.
What phrase best defines the risk that remains after an organization has implemented all intended controls and countermeasures?
Risk that still exists after controls are taken into consideration is known as residual risk. It is the danger that still exists even after your company has adopted the necessary safety measures.
To know more about incremental backup visit;
https://brainly.com/question/28437371
#SPJ4
what are earth's structural spheres? question 5 options: geosphere and atmosphere centrosphere, geosphere, biosphere, and atmosphere lithosphere, biosphere, and atmosphere lithosphere, hydrosphere, and atmosphere lithosphere, hydrosphere, biosphere, and atmosphere
The five Earth systems (geosphere, biosphere, cryosphere, hydrosphere, and atmosphere) combine to create the surroundings we are familiar with.
What are the structural spheres of the Earth? The Earth's system can be divided into four major subsystems: land, water, living beings, and air.These four subsystems are referred to as "spheres." They are the "lithosphere" (land), "hydrosphere" (water), "biosphere" (living things), and "atmosphere" (air).They are called spheres because they are round, like the Earth.The four spheres are the geosphere (all of Earth's rock), hydrosphere (all of Earth's water), atmosphere (all of Earth's gases), and biosphere (all the living things on Earth).The five Earth systems (geosphere, biosphere, cryosphere, hydrosphere, and atmosphere) work together to form our familiar surroundings. The Earth's border is made up of four interconnected portions known as "spheres": the lithosphere, hydrosphere, biosphere, and atmosphere.To learn more about spheres of Earth refer
https://brainly.com/question/10893109
#SPJ4
joe is responsible for the security of the systems that control and monitor devices for a power plant. what type of system does joe likely administer?
Joe probably manages a system of the type known as Supervisory Control and Data Acquisition (SCADA).
Which kind of analysis is most appropriate for evaluating the danger to a company's reputation?Data loss, system downtime, and legal repercussions are a few examples of the risks that can be identified through qualitative risk assessments.
Who ought to take part in risk management activities?An summary of the project's risks and opportunities, together with a plan for risk mitigation or opportunity exploitation, are provided by the risk manager to help management make decisions. They serve as the focal point for the project's risk management efforts.
To know more about SCADA visit :-
https://brainly.com/question/29453664
#SPJ4
you are the network administrator for contoso. your company's network contains an active directory domain containing a user named user1. all computers in the domain run windows 10. you enable windows powershell remoting on the computers. you need to ensure that user1 can access and schedule logging of performance counters. the solution must use the principle of least privilege. to which group should you add user1?
Right-click contoso.com in the Directory Users and Devices window. An Directory domain with the name contoso.com is present on your network.
What is the purpose of PowerShell?PowerShell is frequently used as a scripting to automate system management. In CI/CD setups, it is frequently used to create, test, and publish solutions as well. Built atop the. NET Common Language Framework is PowerShell (CLR).
What makes PowerShell so well-liked?It's a distinctive feature that gives IT specialists the ability to remotely automate and carry out unique operations on any Windows PC connected to the corporate network. The best part is that by simply typing a piece of control code, PowerShell gives IT administrators complete control and visibility of each of those network capacity.
To know more about powershell visit:
https://brainly.com/question/29835395
#SPJ4
assuming the size of the packets is equal, why the efficiency of pure aloha is worse than slotted aloha? a. because packets can collide partially without time boundaries in pure aloha, resulting in more collisions. b. because nodes in slotted aloha can detect collisions. c. because pure aloha has more empty slots without time synchronization.
The size of the packets is equal, the efficiency of pure aloha is worse than slotted aloha because packets can collide partially without time boundaries in pure aloha, resulting in more collisions
What is pure aloha?The original intent behind the ALOHA System was to offer radio communications with a systematically distinct designer engagement. With the use of this substitute technique, the system may decide when and where radio communications are more advantageous than wired ones. It made various networks' accessibility possible and made communication methods practicable.The initial implementation of ALOHA utilised a hub architecture with two separate frequencies, with the hub machine broadcasting packets to all clients on the outgoing channel and the various client computers transmitting data packets to the hub on the inbound channel. If the hub correctly received the data, a brief acknowledgment packet was delivered to the client; if the client did not get the acknowledgment after a brief delay, the client machine would automatically retransmit.To learn more about pure aloha refer to:
https://brainly.com/question/30001346
#SPJ4
ambrose is testing his it department's new firewall deployment. he is using a collection of applications that employ a brute-force technique to craft packets and other forms of input directed toward a target. what is this collection of tools called?
Packet Filtering Firewall is responsible for filtering the packets based on the IP addresses source and destination port numbers and also the source and destination protocols.
What is information security?Information security can be defined as a preventive practice which is typically used to protect an information system (IS) that use, store or transmit information, from potential theft, attack, damage, or unauthorized access, especially through the use of a body of technologies, encryption, firewalls, frameworks, processes and network engineers.A firewall can be defined as a network security protocol that monitors and controls inbound and outbound traffic based on set aside security rules.In Computer technology, a firewall is used to control access to a computer or network, as it creates a barrier between a computer or a network and the internet in order to protect against unauthorized access.Therefore, the other functionality which would influence a decision to deploy a stateless, rather than stateful, firewall are:Block TCP portsAllow network protocols.
To learn more about firewall refer to:
https://brainly.com/question/16157439
#SPJ4
tls provides security at the layer. a. network b. transport c. application d. none of the above
TLS offers security at the transport layer.
What is TLS?A cryptographic technique called Transport Layer Security (TLS) is intended to guarantee communications security over a computer network. Although the protocol is widely used in voice over IP, email, and instant messaging, its use to secure HTTPS is still the most commonly known.
Through the use of cryptography, such as the usage of certificates, the TLS protocol primarily attempts to offer security, including privacy (confidentiality), integrity, and authenticity between two or more communicating computer programs.
The TLS record and the TLS handshake protocols make up its own two layers, which it executes in the presentation layer.
A communications protocol that offers security to datagram-based applications is the closely related Datagram Transport Layer Security (DTLS).
Hence, TLS offers security at the transport layer.
To learn more about Transport Layer Security refer to:
https://brainly.com/question/29556400
#SPJ4
your laser printer keeps printing vertical black lines on its output pages. what is the most likely cause of the problem?
A used-up toner cartridge or a worn-out drum unit are the typical culprits for streaking. Drum units are consumables that only require replacement after 3 or 4 toners have been used. A separate toner and drum unit is not utilized by all printers.
What is a laser printer's drawback?
Unlike inkjet printers, which can print on a variety of papers, laser printers cannot. You can't put anything that is heat-sensitive through them. Simple graphics may be printed on home laser printers, but clean pictures are difficult. Choose an inkjet printer if you wish to print images.
Why would you use a laser printer?
Popular computer printers like laser printers use non-impact photocopier technology, which avoids damaging the paper with keys. A laser beam uses electrical charges to "draw" a document on a drum covered in selenium when a document is supplied to the printer.
To know more about Laser printer visit;
https://brainly.com/question/14783882
#SPJ4
a data analyst uses the annotate() function to create a text label for a plot. which attributes of the text can the analyst change by adding code to the argument of the annotate() function? select all that apply.
The attributes of the text that the analyst can change by adding code to the argument of the annotate() function are: A. Modify the text's font style.B. Adjust the text's size.C. Modify the text's colour.
What is the tag's attribute?Examples of characteristics that specify additional properties or qualities of the element are the width and height of an image. Attributes are always provided in the start tag (also known as the opening tag). Name-value pairs are the most common format for them. Always use quotation marks when referring to attribute values.As a result, "text attributes" refers to all of the font, style, alignment, and other formatting aspects related to a particular character or string of characters.The attributes of the text that the analyst can change by adding code to the argument of the annotate() function are: A. Modify the text's font style.B. Adjust the text's size.C. Modify the text's colour.To learn more about tag's attribute refer to:
https://brainly.com/question/28920102
#SPJ4
what is the main disadvantage of a poll? a. power b. can not set priorities c. no way to mask it d. no hardware support e. too complicated g
A poll's primary drawback is its power. This method's main drawback is how slowly it works.
What is poll ?
The drawback of polling is that if there are too many devices to check, it may take longer to service an I/O device than it does to poll all of the devices. By asking a series of questions and extending generalisations into ratios or confidence intervals, opinion polls are often created to represent the opinions of a population. Pollster is a term used to describe someone who conducts polls. Maximum effectiveness and bandwidth use are the results. Polling is the process through which one programme continuously checks other programmes or devices.
To learn more about Pollster from given link
brainly.com/question/2729655
#SPJ4
select all that apply. in an inheritance situation, the new class that you create from an existing class is known as the
The new class that you create from an existing class in an inheritance situation is referred to as the base class function Object.
Inheritance enables programmers to independently modify original software via public classes and interfaces, to specify a new implementation while preserving the same behaviours, and to construct classes that are built upon existing classes. Several derived classes inherit from a single base class in this style of inheritance. The constructors are called in the same order that classes are inherited when they are created.
What is multiple inheritance?
The base class function Object will be invoked first followed by the function Object of the derived class if we have a base class and one derived class that inherits this base class. Creating a class by deriving from multiple direct base classes is known as multiple inheritance.
To learn more about inheritance from given link
brainly.com/question/14930526
#SPJ4
the two main techniques to extract the color from the floating cap during the making of red wine are:
Answer:Punching - down and Pumping - over.
Choose the correct term for each type of software.
software manages the hardware and software on a computer. Without this software, the computer
would not be functional.
software allows users to complete tasks and be productive. Examples of this software include
browsers, word processors, and video editors.
software allows programmers to create the software and utilities used on computers.
The correct term for each type of software may include is as follows:
An operating system is a type of software that manages the hardware and software on a computer. Without this software, the computer would not be functional.System software is a type of software that allows users to complete tasks and be productive. Examples of this software include browsers, word processors, and video editors.Application software allows programmers to create the software and utilities used on computers.What do you mean by Software?Software may be defined as a set and collection of instructions, data, or programs that are used to operate computers and execute specific tasks.
It is the opposite of hardware, which describes the physical aspects of a computer. Software is a generic term used to refer to applications, scripts, and programs that run on a device.
An operating system is software that controls and coordinates the computer hardware devices and runs other software and applications on a computer. It is the main part of system software and a computer will not function without it.
Therefore, the correct term for each type of software may include is well-mentioned above.
To learn more about Software, refer to the link:
https://brainly.com/question/28224061
#SPJ1
true or false: the following statement might plausibly appear as a functional requirement: the system shall compute a student's gpa by dividing the total grade points for the prior semester by the total credits for that semester, omitting from those totals any courses assigned a grade that does not affect the gpa.
Removing any courses with grades that have no impact on GPA from those totals. This assertion is accurate.
A functional requirement is what?The functionality of a system or one of its subsystems is specified in a functional requirement document. The kind of program, anticipated users, and system type where the software is used are further factors. Functional system requirements should also explicitly specify the system services in detail. Functional user needs may be high-level declarations of what the system should be able to achieve.
What distinguishes non-functional requirements from testing?Performance, stress, and security testing are all types of testing. Non-functional requirements are less liked than functional ones, and if they are not met, the entire system is useless.
To learn more about GPA visit:
brainly.com/question/1686355
#SPJ4
discuss whether or not the following devices/processes are open-loop or closed-loop. if they are closed-loop, please explain the sensing mechanism. (a). traffic light; (b). washing machine; (c). toaster; (d). aircraft autopilot; (e). temperature regulation in human body.
A sensor is used at traffic lights to identify the presence of automobiles. Either a closed loop or an open loop can exist.
How do open and closed loops differ?
An open-loop control system, commonly referred to as a non-feedback system, solely bases its actions on the input; the control action is unaffected by the output. A closed-loop control system, commonly referred to by the term review system, examines the power capacity and modifies it to produce the desired condition.
What distinguishes an open loop from a closed loop?
The open network and a closed loop system are fundamentally different from one another in that the former can self-correct while the latter cannot. As a result, components are quite often known as non-feedback controls, whereas closed-loop systems are frequently referred to as feedback-controlled systems.
To know more about open and closed loops visit:
https://brainly.com/question/23250715
#SPJ4
Yuri wants to assign a task to his co-worker. He clicked the Task button to enter the subject, start date, and end date for the task. Then he clicked the Details button to add the number of hours needed for the task. Yuri clicked Save & Close to complete the assignment, but his co-worker did not receive the task. Which best explains Yuri’s error?
He cannot assign a task to an individual co-worker.
He should have entered the hours needed in the Task area.
He entered the wrong subject name in the Task area.
He did not add his co-worker’s information before saving the task.
It appears that before saving the task, Yuri omitted to include his coworkers' information.
By information, what do you mean?Information is a stimulus that has meaning for the recipient in a particular situation. Data is the broad term used to describe information that is entered into and stored in a computer. Data that has undergone processing, such as formatting and printing, can once more be interpreted as information.
What are some information uses?Uses of information. In a number of circumstances, people turn to information to find meaning. Sometimes they use data strategically, to carry out concrete actions (e.g., to acquire a skill or reach a goal). Sometimes data is used in cognitive ways (e.g., to generate ideas).
To know more about information visit:
https://brainly.com/question/13299592
#SPJ1
Finish the code for this bubble sort. Length = len(mylist) for n in range(length - 1): for test in range(n + 1, length): if mylist[n] mylist[test]: temp = mylist[n] mylist[n] = mylist [test] mylist[test] = temp print(mylist).
Note that the missing character is ">". This is to be inserted in the fourth line as follows: "if myList[n] > myList[test]:" With this, the code for the bubble sort is complete.
What is a bubble sort?Bubble sort, commonly referred to as sinking sort, is a basic sorting algorithm that continually moves through the input list element by element, comparing the current element with the one following it, exchanging their values if needed.
The term "responsibility" refers to the act of determining whether or not a person is responsible for his or her own actions. Just to the movement of air bubbles in the water that rise up to the surface, each element of the array migrate to the end in each iteration. As a result, it is known as a bubble sort.
One of the primary benefits of a bubble sort is that it is a simple algorithm to describe to a computer. There is just one duty to do (compare two values and, if needed, swap them). This results in a very tiny and straightforward computer application.
Learn more about bubble sort:
https://brainly.com/question/18686944
#SPJ1
what is the range of nice values that affect processes access to system resources? what nice value will give the application the most cpu time?
The default value of a process' nice value is 0, and it can vary from -20 (top importance) to +19 (lowest priority).
What does a CPU do?The microcontroller (CPU) is the component of the computer that receives and processes instructions (CPU). A CAD system's CPU may be thought of as its brain. It is made up of a controller, a number of registers, and an arithmetic logic unit unit (ALU). The CPU is known to as a "processor".
Why is the CPU so crucial?The CPU, which houses all the hardware required to process information, process data, and output results, is the body of a computer. The CPU is continually executing computer programs that give it instructions on which data too process and in what order. Without a CPU, we couldn't utilize a laptop to run programs.
To know more about CPU visit :
https://brainly.com/question/14836660
#SPJ4
uppose that the log-based immediate-update technique is employed. describe the recovery process when a system crash occurs at time
Data backups or recovery methods based on delayed and immediate updates can be employed to prevent data loss.
What are the data-base recovery technique?Although database systems can fail, just like any other type of computer system, the information contained inside must always be accessible. A database must have the tools necessary for quick recovery in the event of failure. It must also be atomic, meaning that either the transaction has no impact on the database or it is properly finished and committed (the effect is permanently recorded in the database).
Both data backup and recovery from failure conditions can be done in automatic and non-automatic ways. Database recovery procedures are methods for recovering data that has been lost as a result of system crashes, transaction errors, viruses, catastrophic failure, improper command execution, etc.
Therefore, it is possible to apply data backup strategies or recovery methods based on deferred update and immediate update. The availability of a unique file called a system log is crucial for recovery methods.
When a system crashes, item is searched back through the log for all transactions T that have written a start transaction(T) entry into the log but have not yet written a commit(T) entry; these transactions might need to be rolled back in order to reverse their effects on the database during the recovery process.
UndoingPostponed updatecurrent updateCaching/BufferingDark pagingReverse RecoveryMoving ForwardHere are a few examples of backup methods:
a complete database backupcontrasting backupbackup of transaction logsHence, Data backups or recovery methods based on delayed and immediate updates can be employed to prevent data loss.
To learn more about data base recover techniques refer to:
https://brainly.com/question/25644005
#SPJ4
A problem with virtual networks is that data transmitting through them cannot be encrypted and therefore is not secure.
a. True
b. False
The given statement is False, "virtual networks don't have the drawback of making data transmission across them insecure because it is unable to encrypt it."
What is Virtual Networking?
Multiple PCs, virtual machines (VMs), virtual servers, or other devices can communicate with one another over various office and data center locations thanks to virtual networking. Virtual networking expands these capabilities by using software administration to connect computers and servers over the Internet, as opposed to physical networking, which connects computers using cabling and other hardware. It makes use of virtualized variations of conventional network tools like switches and network adapters to provide easier network configuration changes and more effective routing.
With the help of virtual networking, devices can operate in numerous locations with the same capabilities as a regular physical network. This enables data centers to spread across various physical locations and gives network administrators new, more effective options, such as the ability to quickly modify the network as needs change without having to replace or purchase additional hardware, greater flexibility in provisioning the network to specific needs and applications, and the capability to move workloads across the network infrastructure without compromising service, security, and availability.
To learn more about virtual network visit:
https://brainly.com/question/29492966
#SPJ4
