You put a diode in a microelectronic circuit to protect the system in case an untrained person installs the battery backward. In the correct forward-bias situation, the current is 255 mA with a potential difference of 116 mV across the diode at room temperature (300 K). If the battery were reversed, so that the potential difference across the diode is still 116 mV but with the opposite sign, what would be the magnitude of the current in the diode

Answer:

The moon does not stay at the same distance of the earth because the ortbit of the moon is slightly elliptical. If earth is not tilted at an angle of 66.5°, there will be no change in the season and the earth will have equal length of days and night.

Explanation:

mark me brainlest

Answer:

The final speed will be "[tex]1.185\times 10^7 \ m/sec[/tex]".

Explanation:

The given values are:

Potential difference,

Δv = 400 v

Radius,

r = 0.5580 cm

As we know,

⇒  [tex]W=e \Delta v[/tex]

and,

⇒  [tex]\frac{1}{2}mv^2=e \Delta v[/tex]

then,

⇒  [tex]v=\sqrt{\frac{2e \Delta v}{m} }[/tex]

On substituting the values, we get

⇒     [tex]=\sqrt{\frac{2\times 1.6\times 10^{-19}\times 400}{9.11\times 10^{-31}} }[/tex]

⇒     [tex]=\sqrt{\frac{1.6\times 10^{-19}\times 800}{9.11\times 10^{-31}}}[/tex]

⇒     [tex]=1.185\times 10^7 \ m/sec[/tex]

Answer:

3.35

Explanation:

Got it on Acellus

The light of wavelength 485 nm passes through a single slit. The single between the first (m=1) and second (m=2) interference minima is 3.36°.

Diffraction is the phenomenon of bending of waves through obstacles.  

Given is the wavelength λ= 485 nm, silt width d =  8.32 *10⁻⁶ m, then the angle θ will be

d sinθ =mλ

for m=1, sin θ₁ = λ/d

for m=2, sin θ₂ = 2λ/d

Substitute the values into both expressions to find the angles,

sin θ₁ = 485 x 10⁻⁹ /  8.32 *10⁻⁶

θ₁ = 3.34°

and sin θ₂ = (2 x  485 x 10⁻⁹ )/  8.32 *10⁻⁶

θ₂ = 6.7°

The angle between m =1 and m=2 will be

θ₂ -θ₁ = 6.7° - 3.34° =3.36°

Thus, angle between the first (m=1) and second (m=2) interference minima is 3.36°.

Learn more about diffraction.

https://brainly.com/question/12290582

#SPJ2

Answer:

W = 1.875 J

Explanation:

For this exercise let's use the relationship between work and kinetic energy

          W = ΔK

The kinetic energy of rotational motion is

         K₀ = ½ I w²

we can assume that the box is small, so it can be treated as a point object, with moment of inertia

          I = m rₐ²

angular and linear velocity are related

          v = w r

          w = v / r

we substitute in the equation, for point A

         K₀ = ½ (m rₐ²) (v / rₐ)²

         K₀ = ½ m v²

For the final point B, as the system is isolated the angular momentum is conserved

initial        L₀ = Io wo

final          L_f = I_f w_f

                L₀ = L_f

                 I₀ w₀ = I_f w_f

                (m rₐ²) w₀ = (m  [tex]r_{b} ^2[/tex]) w_f

                 w_f = (rₐ/r_b)² w₀

with this value we find the final kinetic energy

         K_f = ½ I_f w_f²

         K_f = ½ (m [tex]r_{b}^2[/tex]) ( (rₐ / r_b)²  w₀) ²

         K_f = ½ m [tex]\frac{r_a^4}{r_b^2} \ w_o^2[/tex]

we substitute in the realcion of work

          W = K_f - K₀

          W = ½ m  [tex]( \( \frac {r_a^2 }{r_b} )^2[/tex] w₀² - ½ m v²

          W = ½ m  [tex]\frac{r_a^4}{r_b^2} ( \frac{v}{r_a} ) ^2[/tex] - ½ m v²

           W = ½ m [tex]\frac{r_a^2}{r_b^2} \ v^2[/tex] - ½ m v2

          W = ½ m v² (([tex]( \ (\frac{r_a}{r_b})^2 -1)[/tex]

let's calculate

           W = ½ ( [tex]\frac{8}{32}[/tex] ) 5 ((2/1)² -1)

           W = 0.625 (3)

           W = 1.875 J

Answer:

Role of government in regulating production

Explanation:

The role of government in regulating show , provides the legal and social framework, uphold competition, provides public goods and services.

The community's role in conserving and enhancing common-property resources is well known.

In extra, its role in helping market growth by its power to execute trade agreements among transacting parties belonging to the community network is stressed.

Thus, it provides the legal and social framework, maintains competition, and provides public goods and services.

To learn more about  economics in community click here:

https://brainly.com/question/1344575

Answer:

the mass of the object multiplied by the acceleration of the object

Explanation:

N2L states that F = ma (force equals mass times acceleration).

Answer:

B. it increases

Explanation:

As shown in the table provided, the speed of sound in water (1493 m/s) is greater than the speed of sound in air (346 m/s).

Answer:

B is the correct answer.

Explanation:

A car making this turn is pulled downward by its own weight, and pushed up by the road at an angle of 45°, so by Newton's second law,

• the net horizontal force on the car is

∑ F = N cos(45°) = m a = m v ² / R

• the net vertical force on the car is

∑ F = N sin(45°) - m g = 0

where

• N = magnitude of the normal force

• m = mass of the car

• a = v ² / R = centripetal acceleration of the car

• v = tangential speed of the car

• R = 100 m = radius of curvature

• g = 9.8 m/s² = acceleration due to gravity

From the net vertical force equation, we get

N = m g / sin(45°)

and substituting this into the net horizontal force equation and solving for v gives

(m g / sin(45°)) cos(45°) = m v ² / R

v = √(R g cos(45°) / sin(45°)) ≈ 31 m/s

We have that A highway curve of radius 100 m, banked at an angle of 45 degrees, may be negotiated without friction at a speed of

V=32m/s

From the question we are told

a highway curve of radius 100 m, banked at an angle of 45 degrees, may be negotiated without friction at a speed of:

Generally the equation for the Velocity is mathematically given as

[tex]V=\sqrt{rgtan\theta}[/tex]

Therefore

[tex]V=\sqrt{rgtan\theta}\\\\V=\sqrt{100*9.8*tan45}\\\\V=32m/s[/tex]

Therefore

A highway curve of radius 100 m, banked at an angle of 45 degrees, may be negotiated without friction at a speed of

V=32m/s

For more information on this visit

https://brainly.com/question/6201432?referrer=searchResults

Answer:

Explanation:

Time period of rotation

T = 2πR/ V where R is radius of orbit and V is orbital velocity

Orbital velocity V = √ ( GM/R ) , m is mass of the earth .

T = 2πR √R / GM

T² = 4π²R³ / GM

Putting the values

( 126 x 60 )² = 4 x 3.14² x R³ / 6.67 x 10⁻¹¹ x 5.97 x 10²⁴

57.15 x 10⁶ = 39.44 x R³ / 39.82 x 10¹³

R³ = 577 X 10¹⁸

R = 8.325 x 10⁶ m

= 8325 km

Radius of earth = 6400 km

height of satellite = 8325- 6400 = 1925 km .

Answer:

1 and 3

Explanation:

because they are going up from 0

Answer:

true

Explanation:

Answer:

0.03 A

Explanation:

From the question given above, the following data were obtained:

Voltage (V) = 12 V

Resistor (R) = 470 Ω

Current (I) =?

From ohm's law, the voltage, current and resistor are related by the following formula:

Voltage = current × resistor

V = IR

With the above formula, we can obtain the current in the circuit as follow:

Voltage (V) = 12 V

Resistor (R) = 470 Ω

Current (I) =?

V = IR

12 = I × 470

Divide both side by 470

I = 12 / 470

I = 0.03 A

Thus, the current in the circuit is 0.03 A

Answer:

0.03 A

Explanation:

Explain, step by step, how to calculate the amount of current (I) that will go through the resistor in this circuit

0.03 A

Answer:

Explanation:

Point of zero velocity are extreme points situated on either side of equilibrium position .

a )

Time taken to travel between these two points is .15 s

time for half the oscillation = .15 s

Time for full one oscillation = .30 s .

Time period of oscillation = .30 s

b)

frequency = 1 / time period

= 1 / .30s = 3.33 oscillation per second.

c )

Distance between these two point is equal to two times amplitude

2 x amplitude = 30 cm

amplitude = 15 cm

Answer:

B i think

Explanation:

...

The final angular velocity of the carnival ride at a displacement of 6.3 rad is 25.2 rad/s.

The final angular velocity of the carnival ride is determined by applying third kinematic equation as shown below;

ωf = ωi + 2αθ

where;

ωf = 0 + 2(2.0) x 6.3

ωf = 25.2 rad/s

Thus, the final angular velocity of the carnival ride at a displacement of 6.3 rad is 25.2 rad/s.

​

Learn more about angular velocity here: https://brainly.com/question/6860269

Answer: 5.0 rad/s

Explanation: Because that’s what khan said so try it out.

Answer:

The example of the center of the gravity is the middle of a seesaw

Explanation:

I hope this will help you and plz mark me brainlist

Answer:

3. (a) - is the answer most likely

4: (a)

5 (d or c)

6 (b)

Answer:

I guess it is kinetic energy

Answer:

kinetic energy because my dog told me

The two chemical equations show double-replacement reactions are Ca(OH)2 + H2S04 - CaSO4 + 2H20 and Na2CO3 + H2S - H2CO3 + Na2S.

A double replacement reaction have two ionic compounds that are exchanging anions or cations.

From the given options, we can choose the following based on their exchange of anions or cations.

Thus, the two chemical equations show double-replacement reactions are Ca(OH)2 + H2S04 - CaSO4 + 2H20 and Na2CO3 + H2S - H2CO3 + Na2S.

Learn more about double replacement reaction here: https://brainly.com/question/14281077

#SPJ2

Answer:

speed: 35m/s

direction: left

Explanation:

Assuming the right side is the positive direction:

before explosion:

P = mv = 0

after explosion:

P' = 15P + 5P

(Set the velocity of the 15kg piece after explosion as v1' and the velocity of the 5kg piece after explosion as v2')

P' = 0.75mv1' + 0.25mv2'

P' = (15kg)v' + (5kg)(105m/s)

P' = 525kg/m/s + (15kg)v1'

P = P'

525kg/m/s + (15kg)v1' = 0

(15kg)v1' = -525kg/m/s

v1' = -35m/s

speed = |-35| = 35m/s

direction is to the left since the right side is the positive direction.

Answer:

The second bulb will have thicker filament

Explanation:

Given;

First electric bulb: Power, P₁ = 100 W and Voltage, V₁ = 220 V

Second electric bulb: Power, P₂ = 200 W and Voltage, V₂ = 200 V

Resistivity of tungsten, ρ = 4.9 x 10⁻⁸ ohm. m

Resistance of the first bulb:

[tex]P = IV = \frac{V}{R} .V = \frac{V^2}{R} \\\\R = \frac{V^2}{P} \\\\R_1 = \frac{V_1^2}{P_1} = \frac{(220)^2}{100} = 484 \ ohms[/tex]

Resistance of the second bulb:

[tex]R_2 = \frac{V_2^2}{P_2} = \frac{(200)^2}{200} = 200 \ ohms[/tex]

Resistivity of the tungsten filament is given by the following equation;

[tex]\rho = \frac{RA}{L}[/tex]

where;

L is the length of the filament

R is resistance of each filament

A is area of each filament

[tex]A = \pi r^2[/tex]

where;

r is the thickness of each filament

[tex]\rho = \frac{R (\pi r^2)}{L} \\\\\frac{\rho L}{\pi} = Rr^2 \\\\Recall ,\ \frac{\rho L}{\pi} \ is \ constant \ for \ both \ filaments\\\\R_1r_1^2 = R_2r_2^2\\\\(\frac{r_1}{r_2} )^2 = \frac{R_2}{R_1} \\\\\frac{r_1}{r_2} = \sqrt{\frac{R_2}{R_1} } \\\\\frac{r_1}{r_2} = \sqrt{\frac{200}{484} } \\\\\frac{r_1}{r_2} = 0.64\\\\r_1 = 0.64 \ r_2\\\\r_2 = 1.56 \ r_1[/tex]

Therefore, the second bulb will have thicker filament