Answer:
B
Explanation:
because Mg is stronger than Al
What exactly is a proton? Is it a member of the periodic table?
The atomic number is the number of protons in the nucleus of an atom. The number of protons define the identity of an element (i.e., an element with 6 protons is a carbon atom, no matter how many neutrons may be present).
The reactivity of elements can be predicted based on the position of an element in the periodic table. Based on the periodic table, which of the following elements would be expected to be the most reactive?
Iodine (I)
Iodine (I)
Chlorine (Cl)
Chlorine (Cl)
Fluorine (F)
Fluorine (F)
Bromine (Br)
Answer:
Chlorine (Cl) is most reactive out the the listed elements.
Answer:
iodine
Explanation:
It is the most reactive on the periodic table.
I need help!!!! please
6.94 is much more closet to 7.016, so Li 7 is more abundant
9. During an experiment the students prepared three mixtures A)Starch in water B) Sodium chloride solution C) Tincture of Iodine. i) Students observed a visible beam of light through mixture A. Why? ii) Tincture of lodTe did not show Tyndall effect. Explain reason. ill) How can you relate particle size to Tyndall effect?
Answer:
See explanation
Explanation:
Tyndall effect refers to the scattering of light in a solution. Tyndall effect occurs when the size of particles in the solution exceeds 1 nm in diameter. Such solutions are actually called false solutions.
In tincture of iodine, the size of particles in solution is less than 1 nm in diameter hence the solution does not exhibit Tyndall effect. Hence, tincture of iodine is a true solution.
Therefore, if the size of particles in solution exceeded 1nm in diameter, Tyndall effect is observed.
5+64
this is TOTALLY SOOOO hard so help me
^thats what she said
Answer:
69
Explanation:
I thought that I answer is correct
Answer:
The answer is 69
Explanation:
Because if you add one its 66, and so on, hope this helps! but if you add five it will be 69, if you need help with easy equations let me know
Give the relation of energy (E) and frequency (v) as given by Planck. Calculate the frequency and energy of a photon of radiation having wavelength 3000°A.
Pls answer correctly,need it urgently...
Solution:-1
[tex]\\ \sf\longmapsto E=hv[/tex]
E denotes to Energy h denotes to planks constantv denotes to frequency.Solution:-2
Wavelength=3000Å[tex]\boxed{\sf \lambda=\dfrac{c}{v}}[/tex]
[tex]\\ \sf\longmapsto v=\dfrac{c}{\lambda}[/tex]
[tex]\\ \sf\longmapsto v=\dfrac{3\times 10^8m/s}{3000\times 10^{-10}m}[/tex]
[tex]\\ \sf\longmapsto v=0.001\times 10^{18}s^{-1}[/tex]
[tex]\\ \sf\longmapsto v=1.0\times 10^{15}s^{-1}[/tex]
Now
[tex]\\ \sf\longmapsto E=hv[/tex]
[tex]\\ \sf\longmapsto E=6.626\times 10^{-34}Js\times 1.0\times 10^{15}s^{-1}[/tex]
[tex]\\ \sf\longmapsto E=6.6\times 10^{-19}J[/tex]
A chemist sets up a chemical reaction but finds that none of the reactant molecules have the required activation energy. What is the result?
A.
Products will form with less energy input.
B.
No products will be formed.
C.
The products will form too quickly.
D.
Products will convert to reactants.
Answer:
B.
No products will be formed.
2(3a-3)-2(a-2)=3
thank you
Answer:
6a - 6 - 2a + 4 = 3
4a - 2 = 3
4a = 3 + 2
4a = 5
a = 5/4
hope that helps ✌
What is the AHsol for LiF → Lit + F-? The lattice energy is -1,036 kJ/
mol, the enthalpy of hydration for Lit is -499
kJ/mol, and the enthalpy of hydration for F-is-431 kJ/mol. Use A Hooi = -A Hat + AHhydr.
0-968 kJ/mol
-106 kJ/mol
106 kJ/mol
1,966 kJ/
mol
The heat of hydration is defined as the heat absorbed or evolved when one mole of a substance undergoes hydration. The heat of solution is the enthalpy change associated with he dissolution of a solute. The lattice energy is the heat. Lattice energy is the energy released when the components of the lattice are brought together from infinity.
Hence the heat of solution for LiF → Li^+ + F- is -1966 kJ/mol
Given that;
Heat of hydration = ΔH solution – ΔH lattice energy
Where,
ΔH solution = Heat of the solution
ΔH lattice energy = Lattice energy of the solution
The heat of solution or enthalpy of dissolution is defined as the enthalpy change associated with the dissolution of a solute in a solvent
From the formula above;
ΔH solution = Heat of hydration + ΔH lattice energy
Heat of hydration = [(-431) + (-499)] = -930 kJ/mol
ΔH solution = (-930) + (-1,036) = -1966 kJ/mol
Hence the heat of solution for LiF → Li^+ + F- is -1966 kJ/mol
https://brainly.com/question/13526282
The number of grams of helium in a balloon at a pressure of 99.8 kPa, a temperature of 301 K, and a volume of 0.785 L would be
Options:
814 g
0.125 g
0.278 g
337 g
The number of grams of helium in a balloon at a pressure of 99.8 kPa, a temperature of 301 K, and a volume of 0.785 L would be 0.125g.
How to calculate mass?The mass of a substance can be calculated by multiplying the number of moles by its molar mass.
However, the number of moles of helium must be calculated as follows:
PV = nRT
Where;
P = pressureV = volumen = no of molesR = gas law constantT = temperature0.985 × 0.785 = n × 0.0821 × 301
0.773 = 24.7n
n = 0.773 ÷ 24.7 = 0.031moles
mass of He = 0.031 × 4 = 0.125g
Therefore, the number of grams of helium in a balloon at a pressure of 99.8 kPa, a temperature of 301 K, and a volume of 0.785 L would be 0.125g.
Learn more about mass at: https://brainly.com/question/19694949
#SPJ6
Unknown # 29
Flame Test Color: Green
Addition of HCl(aq): Bubbles
Addition of HCl(aq) and BaCl2(aq): NR (No Reaction)
Addition of HNO3(aq) and AgNO3(aq): White precipitate
What is the unknown ionic compound molecular formula?
Answer:
I think it's a sulphate ion, because when you add hydrochloric acid to it it produces bubbles and when you add barium chloride it then produces a white precipitate.its formula is SO4
I hope this helps
If the temperature of a reversible reaction in dynamic equilibrium decreases, how will the equilibrium change?
A. It will shift towards the endothermic reaction.
B. It will not change.
C. It will shift towards the products.
D. It will shift towards the exothermic reaction.
Answer:
D. It will shift towards the exothermic reaction.
Explanation:
When 120 g of carbon reacts completely with 320 g of oxygen the mass of carbon dioxide formed will be?
two easy uses of mixture
Explanation:
it helps to make juices.
It helps to make concentrated acid into dilute acid.
Answer:
Explanation:
Here are a few more examples:
1. Smoke and fog (Smog)
2. Dirt and water (Mud)
1. Mg + HCl … + ….
2. NaOH + HNO3 … + ….
3. KOH + CuCl2 … + ….
4. Na2SO4 + BaCl2 … + ….
5. HCl + FeO à … + …
Explanation:
The answer is mentioned above.
Hope it helps.
A chemist determines by measurements that 0.0550 moles of nitrogen gas participate in a chemical reaction. Calculate the mass of nitrogen gas that participates.
Be sure your answer has the correct number of significant digits.
The mass of nitrogen gas that participated in the chemical reaction is 1.54g
HOW TO CALCULATE MASS OF AN ELEMENT:
Mass of a substance can be calculated by multiplying the number of moles in mol of the substance by its molecular mass in g/mol. That is;mass (M) = molar mass (MM) × number of moles (n)According to this question, a chemist determines by measurements that 0.0550 moles of nitrogen gas (N2) participate in a chemical reaction.
The molecular mass of nitrogen gas (N2) = 14.01(2)= 28.02g/mol
Hence, the mass of the nitrogen gas that participated in the chemical reaction is calculated as follows:
Mass (g) = 0.0550 mol × 28.02 g/molMass = 1.5411Therefore, the mass of nitrogen gas that participated in the chemical reaction is 1.54g
Learn more: https://brainly.com/question/18269198
A piece of sodium metal can be described as?
water and development are substitute of one another.
explanation with it, please
At the beginning of the reaction: N2 + 3H2 -> 2NH there is 1 mol of N. and 3 moles of H, and at the end of it is present a mixture formed by 2.5 moles in total, what is the performance for the reaction?
5.- Al comenzar la reacción: N2+ 3H2 -> 2NH existe 1 mol de N. y 3 moles de H, y al finalizarla está presente una mezcla formada por 2,5 moles en total, ¿cuál es el rendimiento para la reacción?
Answer:
75%
Explanation:
call realistic moles of N2 in the reaction is a
moles of H2 :3a
moles of NH3: 2a
the moles of residual N2 after reaction: 1-a
the moles of residual H2 after react: 3- 3a
the moles of mixture: 2a+1-a+3-3a=2.5
-> a=0.75
H=0.75/1=75%
What is cell wall? Where is it found?
Answer:
A cell wall is a fairly rigid layer surrounding a cell located outside of the plasma membrane that provides additional support and protection. They are found in bacteria, archaea, fungi, plants, and algae. Animals and most other protists have cell membranes without surrounding cell walls.
Explanation:
hii pls help me to balance the equation and state the symbols thanksss
Ca(s)+ H2O (l)----->H2 +Ca(oH)2
Ca(s)+2H2O(l)----->H2(g)+Ca(oH)2
I hope this helps
sorry if it's wrong
hii pls help me to balance the equation and state the symbols thanksss
Answer:
I hope that the link above will be helpful
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
[tex]\boxed{\pmb{\green{\sf{2Mg +H_{2}SO_{4}\dashrightarrow H _{2}+Mg_{2}SO_{4}}}}}[/tex]
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
in h-atom if x is radius of first bohrs orbit de broglie wavelength of an atom in 3rd orbit is a.3πx b.6πx c.9x/2 d.x/2
please I need complete explanation fast
Answer:
can you type question properly.
A piece of wood displaces 12.5 mL of water and has a density of 0.97 g/ml. what is the mass of the piece of wood? what will happen if the wood is placed in water?
HELP PLEASE! ASAP YOUR DA BEST! 15 POINTS YALL
Density=0.97g/mL
Volume=12.5mL
[tex]\\ \sf \longmapsto Density=\dfrac{Mass}{Volume}[/tex]
[tex]\\ \rm\longmapsto Mass=Density(Volume)[/tex]
[tex]\\ \sf \longmapsto Mass=0.97(12.5)[/tex]
[tex]\\ \sf \longmapsto Mass=12.125g[/tex]
I forgot to add the answers i had to my question (While a balloon is being filled, if the temperature of the air in the balloon increases, what happens to it’s volume)
A) It stays the same
B) It deflates
C) It decreases
D) It increases
The correct answer is D ... and if the answer was added to the word "explode" .. it would have been more correct .
Calculate K for 2CO2(g) ⇔ 2CO(g) + O2(g)
given that the equilibrium concentrations of carbon monoxide, oxygen and carbon dioxide are 2.0 x 10-6 M, 1.0 x 10-6 M, and 0.25 M respectively.
Explanation:
here's the answer to your question
that B) My color is sickle: I have a drop of water in my body when I was given heat, white powder was formed So who am i Lets identify. Write my chemical molecular formula
Explanation:
i don't understood your question ⁉️
and what do u mean by my color is sickle
Liquids which do not wer the glass surface form a convex meniscus.True or false
Answer:
true is your answer
Explanation:
hope it helps
Which of the following is NOT a physical property?
Viscosity
Reactivity
Malleability
Density
Answer:
reactivity is NOT a physical property
A compound was found to contain 90.6% lead (Pb) and 9.4% oxygen. What is the empirical formula for this compound?
Answer:
the answer is 47.9 and ik because I just had that question
The empirical formula of the compound is O₄Pb₃.
What is the empirical formula?
An Empirical system is the chemical system of a compound that offers the proportions of the elements gifted within the compound however not the real numbers or arrangement of atoms. This would be the lowest complete variety ratio of the elements within the compound.
Amount of lead (Pb) = 90.6%
⇒and amount of oxygen = 9.4%
taking the whole number ratio
o = 4
Pb = 3
∴ ⇒O: Pb=4:3
O4Pb3 answer.
Learn more about empirical formula here:-https://brainly.com/question/1603500
#SPJ2
