2log₃4-log₃8+log₃9/8
hurry im timedd​

Answer:

The two substances will have the same volume after approximately 3.453 hours.

Step-by-step explanation:

The volume of substance A (measured in cubic centimeters) increases at a rate represented by the equation:

[tex]\displaystyle \frac{dA}{dt} = 0.3 A[/tex]

Where t is measured in hours.

And substance B is represented by the equation:

[tex]\displaystyle \frac{dB}{dt} = 1[/tex]

We are also given that at t = 0, A(0) = 3 and B(0) = 5.

And we want to find the time(s) t for which both A and B will have the same volume.  

You are correct in that B(t) is indeed t + 5. The trick here is to multiply both sides by dt. This yields:

[tex]\displaystyle dB = 1 dt[/tex]

Now, we can take the integral of both sides:

[tex]\displaystyle \int 1 \, dB = \int 1 \, dt[/tex]

Integrate. Remember the constant of integration!

[tex]\displaystyle B(t) = t + C[/tex]

Since B(0) = 5:

[tex]\displaystyle B(0) = 5 = (0) + C \Rightarrow C = 5[/tex]

Hence:

[tex]B(t) = t + 5[/tex]

We can apply the same method to substance A. This yields:

[tex]\displaystyle dA = 0.3A \, dt[/tex]

We will have to divide both sides by A:

[tex]\displaystyle \frac{1}{A}\, dA = 0.3\, dt[/tex]

Now, we can take the integral of both sides:

[tex]\displaystyle \int \frac{1}{A} \, dA = \int 0.3\, dt[/tex]

Integrate:

[tex]\displaystyle \ln|A| = 0.3 t + C[/tex]

Raise both sides to e:

[tex]\displaystyle e^{\ln |A|} = e^{0.3t + C}[/tex]

Simplify:

[tex]\displaystyle |A| = e^{0.3t} \cdot e^C = Ce^{0.3t}[/tex]

Note that since C is an arbitrary constant, e raised to C will also be an arbitrary constant.

By definition:

[tex]\displaystyle A(t) = \pm C e^{0.3t} = Ce^{0.3t}[/tex]

Since A(0) = 3:

[tex]\displaystyle A(0) = 3 = Ce^{0.3(0)} \Rightarrow C = 3[/tex]

Therefore, the growth model of substance A is:

[tex]A(t) = 3e^{0.3t}[/tex]

To find the time(s) for which both substances will have the same volume, we can set the two functions equal to each other:

[tex]\displaystyle A(t) = B(t)[/tex]

Substitute:

[tex]\displaystyle 3e^{0.3t} = t + 5[/tex]

Using a graphing calculator, we can see that the intersect twice: at t ≈ -4.131 and again at t ≈ 3.453.

Since time cannot be negative, we can ignore the first solution.

In conclusion, the two substances will have the same volume after approximately 3.453 hours.

Answer:

c

Step-by-step explanation:

-7.5 is less than 6.5

The expression that represents the amount of money Deion would have saved in w weeks is 95 + 7w and the total savings after 6 weeks will be $137.

A statement expressing the equality of two mathematical expressions is known as an equation.

A mixture of variables, numbers, addition, subtraction, multiplication, and division are called expressions.

An expression is a mathematical proof of the equality of two mathematical expressions.

As per the given,

Initial fixed money = $95

Per week saving $7/week

Total money = fixed money + money in w weeks.

⇒ 95 + 7w

For 6 weeks, w = 6

⇒ 95 + 7× 6 = $137.

Hence "The expression that represents the amount of money Deion would have saved in w weeks is 95 + 7w and the total savings after 6 weeks will be $137".

To learn more about expression,

https://brainly.com/question/14083225

#SPJ3

Answer:

10% of 55

=> 10/100 × 55

=> 1/10×55

=> 5.5

55 increased by 10% => 55 + 5.5

=> 60.5

hope that helps ✌

Answer:

Step-by-step explanation:

10% of 55

10/100*55

1/10*55

5.5 <--- That is 10% of 55

55+5.5 = 60.5

Now

[tex]\\ \sf\longmapsto tan(\alpha+\beta)=\sqrt{3}[/tex]

[tex]\\ \sf\longmapsto \alpha+\beta=60\dots(1)[/tex]

And

[tex]\\ \sf\longmapsto tan(\alpha-\beta)=\dfrac{1}{\sqrt{3}}[/tex]

[tex]\\ \sf\longmapsto \alpha-\beta=30\dots(2)[/tex]

Adding both

[tex]\\ \sf\longmapsto 2\alpha=30+60=90[/tex]

[tex]\\ \sf\longmapsto sin2\alpha=sin90[/tex]

[tex]\\ \sf\longmapsto sin2\alpha=1[/tex]

Answer:

this is the answer of this question

hoping it will help u

Answer:

1st option

1st graph has the centre on (-1,-2) and the distance of the circumference from the centre is 2

Answered by GAUTHMATH

Answer:

l = 2, m = - 1, n = - 6

Step-by-step explanation:

A scalar matrix has its diagonal elements equal and all other elements zero, so

2l - 4 = 0 ( add 4 to both sides )

2l = 4 ( divide both sides by 2 )

l = 2

---------------------------------------

3l + n = 0

3(2) + n = 0

6 + n = 0 ( subtract 6 from both sides )

n = - 6

--------------------------------------

3m - n = 3

3m - (- 6) = 3

3m + 6 = 3 ( subtract 6 from both sides )

3m = - 3 ( divide both sides by m )

m = - 1

Answer:

48 minutes

240 at 60mph = 4 hrs.

240 at 50 mph = 4.8 hrs.

it would take an extra 60*.8 or 48 minutes

Step-by-step explanation:

The trip will be of 48 minutes longer when the speed is decreased by 10 miles per hour.

What is the formula for time?

The time is given by distance/speed. The unit of time is minutes or seconds.

When distance of 240 miles is cover by the speed of 60 miles per hour then the time take to travel this distance will be 240/60=4 hours

When distance of 240 miles is cover by the speed of 50 miles per hour then the time take to travel this distance will be 240/50=4.8 hours

The difference between 4.8 hours and 4 hours is of 0.8 hours or 0.8*60=48 minutes.

Therefore, the trip will be of 48 minutes longer.

Learn more: brainly.com/question/21061928

#SPJ2

[tex]\\ \sf\longmapsto (m-8)+(m-8)+(m-8)+(m-8)+(m-8)+(m-8)=12[/tex]

[tex]\\ \sf\longmapsto 6(m-8)=12[/tex]

[tex]\\ \sf\longmapsto 6m-48=12[/tex]

[tex]\\ \sf\longmapsto 6m=12+48[/tex]

[tex]\\ \sf\longmapsto 6m=60[/tex]

[tex]\\ \sf\longmapsto m=\dfrac{60}{6}[/tex]

[tex]\\ \sf\longmapsto m=10[/tex]

Answer:

M=14

Step-by-step explanation:

Answer:

Either a 45°-45°-90° triangle or an isosceles right triangle depending on the question

Step-by-step explanation:

A triangle that has two 45° angles always has a third angle of 90° making it a 45-45-90 as well as a right triangle.

Answer:

5x=20

5x/5=20/5

x=4

Step-by-step explanation:

substitute the 5x

divide both sides by 5 it will be 20 divide by 5

answer is x =4

Answer:

9--7

Step-by-step explanation:

Answer:

This type of study is called a simulation

Step-by-step explanation:

Answer:

x = 54.6 m

Step-by-step explanation:

Δ MAB and Δ MNP are similar, then corresponding sides are in proportion, that is

[tex]\frac{MA}{MN}[/tex] = [tex]\frac{MB}{MP}[/tex] , substitute values

[tex]\frac{80.5-35}{80.5}[/tex] = [tex]\frac{x}{96.6}[/tex]

[tex]\frac{45.5}{80.5}[/tex] = [tex]\frac{x}{96.6}[/tex] ( cross- multiply )

80.5x = 4395.3 ( divide both sides by 80.5 )

x = 54.6

Answer:

Answer:

Answer:x = 25°

Answer:x = 25°Step-by-step explanation:

Answer:x = 25°Step-by-step explanation:The secant- secant angle FGE is one half the difference of the intercepted arcs, that is (135 - x) = 55 ( multiply both sides by 2 to clear the fraction )

Answer:x = 25°Step-by-step explanation:The secant- secant angle FGE is one half the difference of the intercepted arcs, that is (135 - x) = 55 ( multiply both sides by 2 to clear the fraction )135 - x = 110 ( subtract 135 from both sides )

Answer:x = 25°Step-by-step explanation:The secant- secant angle FGE is one half the difference of the intercepted arcs, that is (135 - x) = 55 ( multiply both sides by 2 to clear the fraction )135 - x = 110 ( subtract 135 from both sides )- x = - 25 ( multiply both sides by - 1 )

Answer:x = 25°Step-by-step explanation:The secant- secant angle FGE is one half the difference of the intercepted arcs, that is (135 - x) = 55 ( multiply both sides by 2 to clear the fraction )135 - x = 110 ( subtract 135 from both sides )- x = - 25 ( multiply both sides by - 1 )x = 25°

Hence the answer is 25.

Answer:

x=4sqrt3 a=4 b=3  ,y=8sqrt3 c=8 d=3

Step-by-step explanation:

because this is a 30-60-90 triangle, it is easy to find the side lengths. the longer leg is sqrt(3) times the shorter leg so x= 12/sqrt(3) or 4sqrt(3). the hypotenuse is 2 times the shorter leg so y= 8sqrt(3)

Answer:

fohohcoufohohcouvhop

Step-by-step explanation:

typing mistake sorry

[tex]\\ \sf\longmapsto x+73=90[/tex]

[tex]\\ \sf\longmapsto x=90-73[/tex]

[tex]\\ \sf\longmapsto x=17[/tex]

Why?

Sum of two complementary angles is 90°

Answer:

Step-by-step explanation:

The idea here is to find the area of the circle and then subtract from it the area of the triangle. That will give you the area of what's left in the circle (the shaded part). The area of a circle is:

[tex]A_c=\pi r^2[/tex] so

[tex]A_c=(3.14)(12.4)^2[/tex]   where 12.4 is the radius.

[tex]A_c=482.81[/tex] rounded to the nearest tenth. I used 3.14 for pi.

Now for the area of the triangle. The formula is

[tex]A_t=\frac{1}{2}bh[/tex] where h is the height of 12.4 and the base is the diameter which is 12.4 * 2 = 24.8

[tex]A_t=\frac{1}{2}(24.8)(12.4)[/tex] so

[tex]A_t=153.76[/tex]

Now subtract the triangle's area from the circle's area:

482.81 - 153.76 = 329.05 mm²

Answer:

If the concavity of f changes at a point (c,f(c)), then f′ is changing from increasing to decreasing (or, decreasing to increasing) at x=c. That means that the sign of f″ is changing from positive to negative (or, negative to positive) at x=c. This leads to the following theorem

Step-by-step explanation:

The previous section showed how the first derivative of a function,  f′ , can relay important information about  f . We now apply the same technique to  f′  itself, and learn what this tells us about  f . The key to studying  f′  is to consider its derivative, namely  f′′ , which is the second derivative of  f . When  f′′>0 ,  f′  is increasing. When  f′′<0 ,  f′  is decreasing.  f′  has relative maxima and minima where  f′′=0  or is undefined. This section explores how knowing information about  f′′

Let  f  be differentiable on an interval  I . The graph of  f  is concave up on  I  if  f′  is increasing. The graph of  f  is concave down on  I  if  f′  is decreasing. If  f′  is constant then the graph of  f  is said to have no concavity.

Note: We often state that " f  is concave up" instead of "the graph of  f  is concave up" for simplicity.

The graph of a function  f  is concave up when  f′  is increasing. That means as one looks at a concave up graph from left to right, the slopes of the tangent lines will be increasing. Consider Figure  3.4.1 , where a concave up graph is shown along with some tangent lines. Notice how the tangent line on the left is steep, downward, corresponding to a small value of  f′ . On the right, the tangent line is steep, upward, corresponding to a large value of  f′ .

Answer:

16 units

Step-by-step explanation:

period = length of an interval that contains exactly one copy of the repeating pattern, so from one peak to another peak.

in this graph its the peaks are 1 and 17, hence the period is 16

Answer:

idea how to tell your loved one how you feel? How about a love song?

Answer:

This would be a regular polygon.

Step-by-step explanation:

A regular polygon has congruent sides and interior angles.

An irregular polygon does not have congruent sides and all interior angles.

A convex polygon does not have a interior angle greater than 180°.

Lastly, a concave polygon has only one interior angle greater than 180°.

Using the process of elimination, it would not be a convex or concave polygon. Now we have either a regular or irregular polygon. This polygon can not be a irregular polygon because all the sides are congruent. This means that this polygon is a regular polygon!

The given polygon is a regular convex polygon.

In geometry, a polygon is a plane figure that is described by a finite number of straight line segments connected to form a closed polygonal chain (or polygonal circuit). The bounded plane region, the bounding circuit, or the two together, may be called a polygon.

The segments of a polygonal circuit are called its edges or sides. The points where two edges meet are the polygon's vertices or corners. The interior of a solid polygon is sometimes called its body.

Given,

Polygon has 8 edges and 8 vertices.

1. Regular or Irregular:

A regular polygon has congruent sides and interior angles.

In the figure all sides are of equal length and the angle are same so, It is a regular polygon.

2. Convex or concave:

Convex polygon has all interior angles less than 180° while in concave polygon at least one interior angle should be greater than 180°.

In the given polygon all angles are less than 180°, so it is a convex polygon.

Hence, by the above explanation, the given polygon is regular convex polygon.

Learn more about polygons here:

https://brainly.com/question/24464711

#SPJ2

Answer:

333354

Step-by-step explanation:

Simplify the expression.

Answer:

333,354

Step-by-step explanation:

First, we add the 3's. And get 21.

333,333 + 21 = 333,354

Suppose there is a function f(x), the definite integral of the function is the difference between the upper and lower x-values.

There are three relationships between the definite integral and the area of the region. The relationships are:

Positive function

The area between the function itself and the x-axis represents the definite integral.

Negative function

The area between the function itself and the x-axis, multiplied by -1 represents the definite integral.

Region between two functions

The definite integral of the function is the difference between the region of both functions.

See attachment for further illustration

Learn more about area of a region and the definite integral at:

https://brainly.com/question/3471148

Answer:

535 students passed and 107 students failed

Step-by-step explanation:

Create a system of equations where p is the number of students who passed and f is the number of students who failed:

p + f = 642

p = 5f

Solve by substitution by plugging in 5f as p into the first equation, then solving for f:

p + f = 642

5f + f = 642

6f = 642

f = 107

So, 107 students failed.

Find how many students passed by multiplying this by 5:

107(5)

= 535

535 students passed and 107 students failed.

Answer:

B

Step-by-step explanation:

(y^(4))^(1/5)=y^(4/5)

Answer:

8.49

Step-by-step explanation:

there is a little formula related to the famous formula of Pythagoras.

it says that the height of a triangle is the square root of the product of both segments of the baseline (the segments the height splits the baseline into).

so, x is actuality the height of the triangle.

x = sqrt(3×24) = sqrt(72) = 8.49