a 38.6 lb weight is supported on several springs whose combined stiffness is 6.4 lb/in. if the system is lifted so that the bottoms of the springs are just free and released, determine the maximum displacement of m, and the time for maximum compression

The percent change in the kinetic energy of the system is [(0.5*(12100 + 4790)*1722) - 5.58 x 106] / (5.58 x 106) x 100% = 4.41%.

The 12100 kg railroad car is initially travelling at a speed of 19.0 m/s and has a kinetic energy of KE = 0.5*12100*1902 = 5.58 x 106 Joules. The 4790 kg load is dropped onto the car from rest, so its initial kinetic energy is 0.

When the load is dropped onto the car, the two objects collide and their velocities after the collision will be equal. Therefore, the final speed of both the railroad car and the load will be v = (12100*19 + 4790*0) / (12100 + 4790) = 17.2 m/s. The percent change in the kinetic energy of the system is [(0.5*(12100 + 4790)*1722) - 5.58 x 106] / (5.58 x 106) x 100% = 4.41%.

Learn more about change in kinetic energy: brainly.com/question/30499217

#SPJ11

The correct answer is the car that is turning experiences no net force.

A net force is the sum of all forces acting on an object, taking into account their magnitude and direction. If an object is not in equilibrium, it experiences a net force, which causes it to accelerate. In physics, a net force, often known as unbalanced force, is defined as the total sum of all forces that act on an object. If the forces acting on an object are balanced, meaning they are the same size but opposite in direction, the object will maintain a constant speed with no acceleration.

In this scenario, the car speeding up experiences the greater acceleration. The car that is turning, on the other hand, experiences no net force since the force acting on the car, the centripetal force, is equal to the force required to maintain its motion.

Therefore, the answer is option D. The car that is turning experiences no net force.

Learn more about net force here:

https://brainly.com/question/14361879

#SPJ11

Answer:

The power of water transferred each hour through a 500m high dam if 500m² are cleared every hour is approximately 4.41 GW

Explanation:

To answer this question, we need to know the density of water, the gravitational acceleration, and the efficiency of the dam. Let's assume that the density of water is 1000 kg/m³, the gravitational acceleration is 9.81 m/s², and the efficiency of the dam is 100%.

The power of water transferred each hour through the dam is given by the formula:

Power = Flow rate x Density x Gravity x Height x Efficiency

where Flow rate is the volume of water that passes through the dam each second, Density is the density of water, Gravity is the gravitational acceleration, Height is the height of the dam, and Efficiency is the efficiency of the dam.

First, let's calculate the flow rate:

Flow rate = Area x Velocity

where Area is the cleared area of 500m² and Velocity is the speed of water passing through the dam.

Assuming that the water is moving at a constant speed, we can use the formula:

Velocity = Height / Time

where Time is the time it takes for the water to pass through the dam.

Since the height of the dam is 500m and we want to know the power transferred each hour, we can convert the time to seconds as follows:

Time = 1 hour / 3600 seconds per hour = 0.000277778 hours

So, the velocity of the water is:

Velocity = 500m / 0.000277778 hours = 1,800,000 m/s

Now we can calculate the flow rate:

Flow rate = 500m² x 1,800,000 m/s = 900,000 m³/s

Finally, we can calculate the power of water transferred each hour through the dam:

Power = Flow rate x Density x Gravity x Height x Efficiency

Power = 900,000 m³/s x 1000 kg/m³ x 9.81 m/s² x 500m x 1

Power = 4,405,500,000 watts or approximately 4.41 GW

Therefore, the power of water transferred each hour through a 500m high dam if 500m² are cleared every hour is approximately 4.41 GW.

The mass of a particular bar of gold-pressed latinum on the moon is 100 grams.

Gold-pressed latinum (GPL) is a kind of currency in the Star Trek world. Latinum, a rare silver-colored liquid, is pressed between gold layers to make GPL, which is valued in the Federation as a rare and valuable resource. The value of GPL is measured in amounts of gold. It can be used in various types of exchange and trade.

The mass of a particular bar of gold-pressed latinum when it is brought to the moon is the same as its mass on Earth. The bar's mass will stay the same no matter where it is located because mass is a constant property of an object. Mass is a measure of an object's resistance to acceleration in response to a force. It is a measure of how much matter is contained in an object.

As a result, if an object has a mass of 100 grams on Earth, it will have the same mass on the moon or any other location in the universe. Therefore, the mass of a particular bar of gold-pressed latinum when it is brought to the moon is 100 grams.

To learn more about moon, click here:

https://brainly.com/question/398659

#SPJ11

To calculate the missing values in the table, we can use the formulas:

Using these formulas, we can fill in the missing values:

Power(W)          Work Done(J)    Time Taken(s)

For a,. 3000       90000                30

For b,. 20            100                      5

For c,. 50            100                      2

For d. 700           245                     0.35

For e. 25             1875                     75

For f. 50000       500000              10

For g. 150            450                      3

For h. 0.5            10                         20

What is power?

Power is the rate at which work is done or energy is transferred. Mathematically, power is defined as the amount of work done or energy transferred per unit time. The unit of power is the watt (W), which is equal to one joule of work per second.

To know more about the power, visit:

https://brainly.com/question/29575208

#SPJ1

To calculate the missing values in the table, we can use the formulas:

Power = Work Done / Time Taken

Work Done = Power x Time Taken

Time Taken = Work Done / Power

Using these formulas, we can fill in the missing values:

Power(W)          Work Done(J)    Time Taken(s)

For a,. 3000       90000                30

For b,. 20            100                      5

For c,. 50            100                      2

For d. 700           245                     0.35

For e. 25             1875                     75

For f. 50000       500000              10

For g. 150            450                      3

For h. 0.5            10                         20

What is power?

Power is the pace at which labour or energy is done or transferred. Power is described mathematically as the quantity of labour done or energy moved per unit time. The watt (W) is the measure of electricity, and it equals one joule of work per second.

To know more about the power, visit:

brainly.com/question/29575208

#SPJ1

Balanced net forces have equal and opposing forces that cancel each other out and provide a net force of zero, which does not alter the motion of an item.

An object's velocity remains constant and motion is unaltered when the net forces acting on it are balanced. This indicates that the thing is either stationary or moving continuously. When the forces exerted on an item are opposing in direction and of equal magnitude, they are said to be balanced forces. The forces in this situation cancel one another out, leaving a net force of zero. This can happen when one force is applied to an item and that object applies an equal and opposite force in the opposite direction to another object. It can also happen when two or more forces are applied in opposing directions and of equal magnitude. Understanding equilibrium and stability in physics requires a knowledge of the idea of balanced forces.

learn more about Balanced net forces here:

https://brainly.com/question/29769471

#SPJ4

Hydroelectric dams generate electricity through water impoundment, in which dam operators control the rate of water flow to turbines.

c is the correct option.

Hydroelectric dams are dams used to produce electricity. The movement of water drives turbines, which power generators that generate electricity.

The movement of water, generated by gravity, is what drives turbines. Hydroelectric dams are the most widely used renewable energy source, accounting for approximately 16% of global electricity production.

Hydroelectric dams generate electricity through water impoundment, in which dam operators control the rate of water flow to turbines.

This is the process of using turbines that are powered by the movement of water that has been dammed to generate electricity.

Turbines are powered by water that has been dammed to generate electricity, which is then sent to a power station to be used.

The electricity generated from hydroelectric dams is clean and safe, making it an important part of the renewable energy mix. They are also an essential part of the global infrastructure because they provide reliable, low-cost power.

They also assist in the management of rivers, flood control, and irrigation systems in various parts of the world.

To know more about Hydroelectric dams: https://brainly.com/question/18776929

#SPJ11

2.1 As more resistors are added in parallel, the equivalent resistance approaches zero

2.2 Kirchhoff's loop rule is equivalent to the conservation of energy principle.

As more resistors are added in series, the equivalent resistance of the circuit approaches infinity. In contrast, as more resistors are added in parallel, the equivalent resistance approaches zero. This statement is TRUE. The equivalent resistance, Req, of a parallel combination of resistors is less than any of the resistors in the combination, while for a series combination it is equal to the sum of the resistances.

Kirchhoff's loop rule is equivalent to the conservation of energy principle. Kirchhoff's loop rule or Kirchhoff's voltage law (KVL) is a result of the conservation of energy principle. The principle of conservation of energy states that energy can neither be created nor destroyed, it can only be transformed from one form to another. In a closed loop, the total energy gained is equal to the total energy lost, according to the principle of conservation of energy.

Learn more about Kirchhoff's loop rule and equivalent resistance at : https://brainly.com/question/30580929

#SPJ11

The speed of the spacecraft in a circular orbit around Mars at an altitude of 200 km is approximately 3,543.62 m/s, and the period of the orbit is approximately 6,867.97 seconds or 1.91 hours.

To calculate the speed of a spacecraft orbiting Mars in a circular orbit, use the formula: v = √(GM/R)

Where: v = speed of the spacecraft in meters per second

G = gravitational constant 6.674 × 10⁻¹¹ N m²/kg²

M = mass of Mars (6.39 × 10²³ kg)

R = radius of the orbit (200 km + the radius of Mars, 3,389 km)

Substituting in the values, we get:

v = √((6.674 × 10⁻¹¹ N m²/kg²) × (6.39 × 10²³ kg) / (3.5895 × 10⁶ m))

v ≈ 3,543.62 m/s

Therefore, the speed of the spacecraft in a circular orbit around Mars at an altitude of 200 km is approximately 3,543.62 m/s.

The formula to calculate the period of a circular orbit is T = 2πR/v

Where: T = period of the orbit in seconds

R = radius of the orbit in meters (200 km + 3389.5 km = 3589.5 km = 3.5895 × 10⁶ m)

v = speed of the spacecraft in meters per second

Plugging in the values, we get:

T = 2π(3.5895 × 10⁶ m) / (3,543.62 m/s)

T ≈ 6,867.97 seconds

The period of the orbit is approximately 6,867.97 seconds or 1.91 hours.

Therefore, the speed of the spacecraft in the circular orbit is 3,584 m/s and the period of the orbit is 6,867.97 seconds.

Learn more about speed here:

brainly.com/question/13943409

#SPJ11

The proportional equation that matches the context of a 33-inch candle burning down in 12 hours is b = 2.75t.

A candle that is 33 inches long is called a 33-inch candle. Candles are a popular decorative item that is commonly used for lighting, as decoration for weddings, and parties, or to create an aromatic atmosphere. B represents the length of the candle that has burned away at any time given in hours, t.

To find the proportional equation for b in terms of t that matches the context of a 33-inch candle burning down in 12 hours, the following steps should be followed:

Identify the given informationThe length of the candle (l) = 33 inchesThe time taken for the candle to burn down (t) = 12 hours

Determine the rate of burning The rate of burning of the candle is given by l/t. Therefore, the rate of burning = 33/12 = 2.75 inches per hour.

The proportional equation for b in terms of t is given by b = rt where r is the rate of burning. Therefore, b = 2.75t.

To know more about proportional equation:https://brainly.com/question/21749206

#SPJ11

Answer:

well first u divide the numbers

Answer:

Work is negative on the way up and positive on the way down.

Explanation:

Work is positive if displacement and the force are in the same direction.

Work is negative if displacement and the force are in opposite directions.

(Note that work is zero if displacement is perpendicular to the force.)

In this question, the gravity on the object points downwards at all times.

On the way up, the position of the object is above where it was launched. Hence, displacement would point upwards.

Since the direction of gravity is opposite to that of displacement on the way up, the work on the object would be negative.

In contrast, displacement of the object points downward on the way down. Since displacement is in the same direction as the force of gravity, the work on the object would be positive.

When the air is in geostrophic balance, it flows parallel to isobars  and above the boundary layer.

Geostrophic balance is a state of balance between the pressure gradient force and the Coriolis force, where the pressure gradient force is directed from higher to lower pressure, and the Coriolis force is perpendicular to the direction of motion. In this state, the wind flows parallel to the isobars, with the pressure gradient force and the Coriolis force balancing each other out.

The boundary layer is the layer of air near the Earth's surface where friction between the air and the surface slows down the wind and causes it to flow in a more complex manner, with the wind direction changing with height. However, in the geostrophic flow regime, the wind flow is typically above the boundary layer and thus not affected by surface friction.

Therefore, in geostrophic balance, the wind flows parallel to isobars and above the boundary layer, with little to no effect from the Earth's surface.

Learn more about geostrophic balance here

brainly.com/question/28314662

#SPJ4

The current in a counductor if 3.15*10^18 electrons pass a given point in the conductor in 10 seconds is 0.0504 amperes

The current in a conductor is defined as the rate at which electric charge flows through it. The unit of current is amperes (A), which is defined as coulombs per second. One coulomb is equal to the charge on 6.24 × 10^18 electrons.

Given that 3.15 × 10^18 electrons pass a given point in the conductor in 10 seconds, we can find the charge that flows through the point as follows:

Number of electrons = 3.15 × 10^18

Charge on one electron = 1.6 × 10^-19 coulombs

Total charge = Number of electrons × Charge on one electron

Total charge = 3.15 × 10^18 × 1.6 × 10^-19

Total charge = 0.504 coulombs

The current is the rate of flow of charge, so we can find it by dividing the total charge by the time taken:

Current = Total charge ÷ Time taken

Current = 0.504 coulombs ÷ 10 seconds

Current = 0.0504 amperes (A)

Therefore, the current in the conductor is 0.0504 amperes, or 50.4 milliamperes (mA).

Learn more about current below.

https://brainly.com/question/24858512

#SPJ1

The relative humidity of an air parcel will increase if any of the following actions are taken:

To understand this further, we can look at the formula for relative humidity, which is the amount of water vapor in the air divided by the amount of water vapor that can exist at a particular temperature. When the temperature is kept constant and the dew point increases, the amount of water vapor in the air increases, resulting in an increase in relative humidity.

The followings are the given options and the actions they will take that will cause the relative humidity of an air parcel to increase:

Option A: Keep the parcel's temperature constant and increase the parcel's dew point. This action would increase the RH of the air parcel because it will increase the quantity of water vapor in the air parcel. As the parcel's temperature is constant, the ability of the air to hold water vapor also remains constant.

Option B: Decrease the parcel's temperature and increase the parcel's dew point. This action would also increase the RH of the air parcel. As the temperature of the parcel decreases, the amount of moisture that the air can contain also decreases. When the dew point is raised, the quantity of water vapor in the air parcel rises relative to the amount it can carry.

Option C: Keep the parcel's temperature constant and keep the parcel's dew point constant. In this case, there will be no increase in RH because the quantity of water vapor in the air parcel will remain the same as the ability of the air to hold water vapor remains constant.

Option D: Increase the parcel's temperature and increase the parcel's dew point. Increasing the parcel's temperature will raise the ability of the air to hold water vapor, but it will not increase the amount of water vapor in the air parcel. As a result, the RH of the air parcel will decrease.

Option E: Keep the parcel's dew point constant and increase the parcel's temperature. This action will also decrease the RH of the air parcel as it will increase the amount of moisture that the air can hold. Thus, the relative humidity will decrease.

To know more about relative humidity follow

https://brainly.com/question/13275394

#SPJ11

Explanation:

E=(mv²)/2 ΔE = E2-E1 = (m(v2²-v1²))/2 = ?

от этогo:

а) ΔE = 16 MДж

б) ΔE = 112 МДж

c) ΔΕ = 208 МДж

The device used through a ureteroscope to capture an intact calculus or fragments if fractured by laser is called a basket retrieval device.

A ureteroscope is a specialized tool that is used to examine and treat the inside of the ureter and kidney. It is made up of a long, thin tube with a camera and a light source at the end, which is inserted into the patient's urinary tract through the urethra. The physician will be able to examine the lining of the bladder, ureters, and kidneys during this examination.

A basket retrieval device is a specialized tool that is used during ureteroscopy, which is a minimally invasive surgical technique used to examine the inside of the urinary tract. It is used to remove kidney stones or any fragments that have been broken down by laser lithotripsy.The basket retrieval device works by capturing the stones or fragments with its metal "basket" and then removing them from the body. The physician will then be able to extract the stones or fragments by retracting the basket into the ureteroscope's working channel. The stones will be disposed of or sent to a lab for further testing.

More on ureteroscope: https://brainly.com/question/28170411

#SPJ11

Explanation:

# Unmanaged population distribution

# lack of sanitation programs

# lack of awareness programs

# lack of implementation of policies and rules

# carelessness of people and government

# Unmanaged waste disposal

Energy is being transported in the positive y direction by an electromagnetic wave. The magnetic field is in the positive x direction at one spot and one moment. At that precise moment, the electric field is oriented in the "negative z" direction.


The given electromagnetic wave is transporting energy in the positive y direction. At one point and one instant, the magnetic field is in the positive x direction. Now we have to find the direction of the electric field at that point and instant. According to the right-hand rule, when the magnetic field is directed towards the positive x-axis, the electric field will be directed downwards along the negative z-axis. Therefore, the electric field at that point and instant points in the negative z direction.

To know more about electromagnetic wave:https://brainly.com/question/75996

#SPJ11

The block will be moving at 3.97 m/s 6 seconds after the pull is applied.

Given Mass of the block, m = 421 kg, Inclined angle, θ = 4.54°, Force applied, F = 3282 N, Coefficient of friction, μ = 0.47, Time, t = 6 s

Using Newton's second law of motion, F - μmg sin θ = ma

Where,
m = Mass of the block
g = Acceleration due to gravity
a = Acceleration of the block

Substituting the given values,

3282 - 0.47 × 421 × 9.81 × sin 4.54° = 421 × a
a = 0.6614 m/s²

Using kinematic equations of motion,

v = u + at

Where,
u = Initial velocity
v = Final velocity
a = Acceleration
t = Time

Since the initial velocity is zero, the above equation becomes
v = at

Substituting the values,
v = 0.6614 m/s² × 6 s
v = 3.97 m/s

Therefore, the block will be moving at 3.97 m/s 6 seconds after the pull is applied.

More on friction: https://brainly.com/question/29073383

#SPJ11

For each charge, the direction of the magnetic force can be determined using the right-hand rule. For the last one, the direction of the magnetic field can be determined by observing the direction of the current.

The right-hand formula can be used to calculate the direction of the magnetic field for each charge. According to the formula, if you aim your right thumb in the direction of the charged particle's velocity and your fingers in the direction of the magnetic field, the way your hand confronts is the magnetic force direction.

To identify the direction of the magnetic field for the final charge, examine the direction of the current. The magnetic field is perpendicular to the current and can also be calculated with the right-hand formula.

Learn more about right-hand rule:

https://brainly.com/question/27332584

#SPJ4

The structure that would have helped to protect the brain from the external force when the rock hit Cesar are as follows: Dura mater and Cerebrospinal fluid.

What is the central nervous system? The central nervous system (CNS) is responsible for processing incoming stimuli from the peripheral nervous system and producing a coordinated response. It includes the brain and the spinal cord.

The brain is the largest component of the CNS, comprising 2% of the body's weight but consuming about 20% of its oxygen and nutrients. It consists of three main parts: the brainstem, the cerebellum, and the cerebrum.

The brainstem is responsible for regulating critical functions like respiration, circulation, and digestion; the cerebellum controls motor coordination, and the cerebrum is the area of the brain responsible for sensory perception, emotion, and movement.

What is external force? External forces, also known as contact forces, are forces that act on an object as a result of its interaction with its surroundings. Forces that do not require contact to take effect, such as gravitational and magnetic forces, are not considered external forces.

Examples of external forces are gravity, air resistance, tension, and friction. Dura mater and Cerebrospinal fluid as the structure that would have helped to protect the brain from the external force when the rock hit Cesar. When a rock hits Cesar, the external force created by it must be transferred to the skull, and ultimately the brain.

However, several protective features of the head help to reduce the severity of the impact. The brain is protected by two main structures: the dura mater and the cerebrospinal fluid.

The dura mater is the outermost layer of the meninges, which is a protective membrane covering the brain and spinal cord. It acts as a cushion, absorbing some of the external force generated by the impact.

Cerebrospinal fluid is a clear liquid that flows throughout the central nervous system, filling the space between the brain and the skull. It acts as a shock absorber, reducing the impact's intensity by distributing the force more evenly.

To know more about central nervous system, refer here:

https://brainly.com/question/29974261#

SPJ11#

The current flowing out of a resistor is typically smaller than the current flowing into it. Resistors do not actually slow down the flow of charge, they merely convert electrical energy into heat.

The statement that the current flowing out of a resistor is smaller than the current flowing into it is correct. This is because resistors slow down the flow of charge. The amount of current flowing through a resistor is determined by the amount of voltage across the resistor and the resistance of the resistor. When the voltage across the resistor increases, the current flowing through it also increases.

Conversely, when the resistance of the resistor increases, the current flowing through it decreases. Resistors are used to control the flow of current in electrical circuits. They are used in a variety of applications, such as in voltage dividers, filters, and voltage regulators.

For example, a voltage divider is a circuit that divides a voltage into two or more parts. A voltage divider is made up of two resistors in series, and the output voltage is taken across one of the resistors. The amount of voltage across the output resistor is determined by the values of the two resistors.

If the two resistors are equal, the output voltage will be half the input voltage. If the output resistor is smaller than the input resistor, the output voltage will be less than half the input voltage. Conversely, if the output resistor is larger than the input resistor, the output voltage will be greater than half the input voltage.

Learn more about Resistor:

https://brainly.com/question/14883923

#SPJ11

The true strain at the onset of necking can be obtained from the Hollomon equation as follows: true strain = (K/S)^(1/n).

Here, K is the strength coefficient, S is the stress, and n is the strain hardening exponent. Thus, given the values of these parameters, we can calculate the true strain at the onset of necking.

The Hollomon equation is a mathematical expression for the true stress-true strain curve that relates the true stress to the true strain in a material. It is expressed as follows: true stress = K(true strain)^n. Here, K is the strength coefficient and n is the strain hardening exponent.

The true strain at the onset of necking is the strain at which the material starts to deform plastically instead of elastically. This can be obtained from the Hollomon equation by rearranging it to the form true strain = (K/S)^(1/n). Thus, given the values of the parameters K, S, and n, we can calculate the true strain at the onset of necking.

To know more about elastically click on below link:

https://brainly.com/question/14450755#

#SPJ11

A ball rolls across the floor, slowing down with a constant acceleration of magnitude a = 4.51 m/s2.

The ball has positive velocity v after rolling a distance x = 2.66 m across the floor.

To calculate the ball's initial speed v0 if

v = 11.17 m/s.

The initial velocity of the ball, v0 =?

The final velocity of the ball, v = 11.17 m/s

The acceleration of magnitude a = 4.51 m/s2

Distance travelled, x = 2.66 m

If an object has initial velocity v0, constant acceleration a, and travelled distance x, then its final velocity is given by:

v2 = v0² + 2ax

Here, the ball's initial velocity is v0, and its final velocity is v.

After substituting the given values, we have:

v2 = v0² + 2ax

=> (11.17)²

= v0² + 2(4.51)(2.66)

=> 124.57

= v0² + 25.39

=> v0² = 124.57 - 25.39

=> v0² = 99.18 => v0 = √99.18

=> v0 = 9.96 m/s

Hence, the initial velocity of the ball is v0 = 9.96 m/s.

To know more about velocity:

https://brainly.com/question/29519833

#SPJ11

(a) Angular acceleration of the tyres= 7.3 rad/s^2

(b) Time required to stop= 8.9 s

(c) Distance travelled= 492.5 m

The angular acceleration of the tires can be calculated by using the following equation:

Angular acceleration = (Change in angular velocity)/(time).

Using the given information, we can calculate the angular acceleration as follows:

Angular velocity = (95 revolutions)/(95 km/h)
Time = (95 km/h - 55 km/h)/(95 km/h)
Angular acceleration = (95 revolutions)/(Time x 0.80 m)
Angular acceleration = 7.3 rad/s^2

For part b, the amount of time required for the car to stop can be calculated as follows:

Time = (55 km/h)/(7.3 rad/s^2 x 0.80 m)
Time = 8.9 s

For part c, the distance the car travels can be calculated as follows:

Distance = (55 km/h x 8.9 s)
Distance = 492.5 m

"angular acceleration", https://brainly.com/question/31145298

#SPJ11

A survey was conducted at local colleges around Madison where 692 students were surveyed, and 421 replied that they were over 6 feet tall showing a standard error of 0.0084 in the average height of a college student.

The standard error is given by the formula given below:

[tex]$$SE= {s}/{\sqrt{n}}$$[/tex]

Where s is the standard deviation,

n is the sample size.

Now let us find out the standard deviation by using the formula given below:

[tex]$$s=\sqrt{\frac{(421-271.17)^2+(271.17-270)^2}{692-1}}$$[/tex]

After calculating we get that the standard deviation s is equal to $0.2208$.

Now let us plug the value of the standard deviation s and sample size n into the formula for standard error:

[tex]$$SE={s}/{\sqrt{n}}$$[/tex]

On substituting the respective values, we get [tex]$$SE={0.2208}/{\sqrt{692}}$$[/tex]

On solving, we get that the standard error is equal to 0.0084

Therefore, the standard error is 0.0084.

Learn more about standard error: https://brainly.com/question/14467769

#SPJ11

The true statement is "Image 1st is sharper than Image 2nd and has a larger file size than Image 2nd"

A bitmap image is a type of digital image that is made up of pixels, which are small squares of color that form an image.

Bitmap image also known as raster images.

Image resolution refers to the number of pixels contained in a digital image, typically measured as the number of pixels per inch (PPI) or dots per inch (DPI). The resolution of an image determines the level of detail and clarity that can be seen in the image.

To know more about bitmap image, visit:  

https://brainly.com/question/26230407

#SPJ1

The relationship between the velocity of a fluid and the size of the sediment that the fluid carries is directly proportional.

Higher velocity fluids are capable of carrying larger sediments while lower-velocity fluids are capable of carrying smaller sediments. This is due to the fact that higher-velocity fluids have greater kinetic energy, which allows them to overcome the gravitational forces that hold larger sediments in place.

A fluid is a substance that is able to flow and take on the shape of the container it is placed in, with the ability to deform under applied shear stress. Examples of fluids include liquids and gases. In contrast, solids maintain their shape and volume under applied stress.

To know more about "- fluid here

https://brainly.com/question/19416780

#SPJ4