Answer:
18,9g de hexano son necesarios
Explanation:
Basados en la ley de Raoult, la presión de vapor ejercida por una solución es:
P = P°*Xsolvente
Donde P es la presión de la solución deseada = 700mmHg, P° la presión de vapor de vapor del benceno = 1atm = 760mmHg y X es la fracción molar del solvente (Benceno).
Reemplazando:
700mm Hg = 760mmHg * X(Benceno)
0.9211 = X(Benceno)
La fracción molar de benceno se define como:
X = Moles benceno / Moles benceno + Moles hexano
Moles benceno -Masa molar: 78g/mol-
200g * (1mol/78g) = 2.5641 moles benceno
X = Moles benceno / Moles benceno + Moles hexano
0.9211 = 2.5641 moles benceno / 2.5641 moles benceno + Moles hexano
0.9211moles Hexano + 2.3618 = 2.5641
0.9211*Moles Hexano = 0.2023
Moles hexano = 0.2023/0.9211 = 0.2196 moles hexano.
Masa Hexano -Masa molar: 86g/mol-
0.2196 moles hexano * (86g/mol) =
18,9g de hexano son necesariosLa cantidad de hexano (C6H14) que se debe agregar a 200 g de benceno para permitir que la presión de vapor se convierta en 700 mm de Hg sería:
18.9 g
Usando la ley de Raoult, la presión de vapor que libera una solución se encuentra por:
P = P ° × X disolvente
Donde (P) denota la presión de la solución deseada
P ° denota la presión de vapor del benceno y
X denota la fracción molar del disolvente (benceno).
En el caso dado,
(P) = 700 mmHg,
P° = 1atm = 760mmHg
Fracción molar de benceno = 0,9211 (∵ 700/760)
La fracción molar de benceno (X) = Moles de benceno/Moles de benceno + Moles de hexano
Moles de benceno - Masa molar: 78g / mol - 200 g × (1 mol / 78 g)
= 2.5641 moles de benceno
X = Moles de benceno/Moles de benceno + Moles de hexano
0.9211 = 2.5641 moles Benceno/2.5641 moles Benceno + Moles de Hexano
⇒ 0,9211 × moles de Hexano + 2,3618 = 2,5641
⇒ 0.9211 × moles de Hexano = 0.2023
∵ Moles de Hexano = 0.2023/0.9211
[tex]= 0.2196 moles[/tex]
[tex]Hexane mass - Molar mass = 86g/mol - 0.2196 mole hexane[/tex] × [tex](86g/mole)[/tex]
[tex]= 18.9g[/tex]
Por tanto, 18,9 g es la respuesta correcta.
Learn more about "Benzene" here:
brainly.com/question/25798187
Why is the charge on a charged sphere distributed uniformly over its surface?
-Similar charges seek to be the minimum distance possible from each other.
-Opposite charges seek to be the maximum distance possible from each other.
-Similar charges seek to be the maximum distance possible from each other.
-None of the above
Answer:
Similar charges seek to be the maximum distance possible from each other
Explanation:
On a charged sphere, there are like charges and these like charges are repelled by each other to the far ends of the sphere. Hence they are distributed uniformly in the sphere.
PLEASE HELP
Which of the following correctly orders the types of radiation from the LONGEST wavelength to the SHORTEST wavelength?
A. Green Visible Light, Red Visible Light, Blue Visible Light, Ultraviolet
B. Microwave, Orange Visible Light, Ultraviolet, Violet Visible Light
C. Red Visible Light, Infrared, Microwaves, Radio waves
D. Microwave, Blue Visible Light, Ultraviolet, Gamma
Answer:
D. Microwave, Blue Visible Light, Ultraviolet, Gamma
Explanation:
colors longest to shortest are
red green blue violet
longest wavelength to shortest:
radio waves, microwaves, infrared, optical, ultraviolet, X-rays, and gamma-rays.
PLS HELP!!
Compare and contrast an electrolytic cell with a voltaic cell. Provide one example where both are present in daily life.
Answer:
See explanation
Explanation:
An electrolytic cell functions by a non spontaneous chemical process. Energy is supplied in the form of electricity through a battery to drive the electrochemical process.
A voltaic cell functions by a spontaneous chemical process. Energy or work can be derived from a voltaic cell.
When iron is rusting, a natural voltaic cell is set and the iron is converted to hydrated iron III hydroxide. The set up used for the extraction of sodium metal from brine functions on the basis of electrolysis.
if sneezing is the response to smelling food is it conditioned or unconditioned
Answer:
i think its unconditioned response.hope it helpsstay safe healthy and happy.At a recycling plant, old tin cans are melted down and reconstructed. This is an example of a ___________.
The molecule that functions as the reducing agent (electron donor) in a redox or oxidation-reduction reaction _____.
El fluoruro de hidrógeno HF que se utiliza en
la obtención de los freones (los cuales
destruyen la capa de ozono de la
estratosfera), se prepara mediante la
siguiente reacción: CaF2 + H2SO4
CaSO4 + 2HF Si se hacen reaccionar 50gr
de CaF2 con 100 gr de H2SO4 (masas
atómicas Ca=40,F=19, H=1, S=32, O=16)
Answer:
25.6g de HF son producidos
Explanation:
...¿Cuánto HF es producido?
Para resolver este problema debemos convertir la masa de cada reactivo a moles usando su masa molar. Como la reacción es 1:1, el reactivo con menor número de moles es el reactivo limitante. Con las moles del reactivo limitante podemos obtener las moles de HF y su masa así:
Moles CaF2:
Masa molar:
1Ca = 40g/mol
2F = 19*2 = 38g/mol
40+38 = 78g/mol
50g CaF2 * (1mol/78g) = 0.641 moles CaF2
Moles H2SO4:
Masa molar:
2H = 2g/mol
1S = 32g/mol
4O = 64g/mol
98g/mol
100g H2SO4 * (1mol / 98g) = 1.02 moles H2SO4
Como las moles de CaF2 < Moles H2SO4: CaF2 es reactivo limitante.
Moles HF usando la reacción:
0.641 moles CaF2 * (2mol HF / 1mol CaF2) = 1.282 moles HF
Masa HF:
Masa molar:
1g/mol + 19g/mol = 20g/mol
1.282 moles HF * (20g/mol) =
25.6g de HF son producidosWhich of the following elements has three valence electrons? (2 points)
Li
C
Al
Mg
Answer:
Al
Explanation:
It has 3.
ASAP :))
How would a reaction that occurs without the addition of energy be
described?
A. At equilibrium
B. Spontaneous
C. Nonspontaneous
D. Not at equilibrium
Answer:
B
Explanation:
Exergonic reactions are also called spontaneous reactions, because they can occur without the addition of energy. ... In this case, the products, or final state, have more free energy than the reactants, or initial state. Endergonic reactions are non-spontaneous, meaning that energy must be added before they can proceed.
Exergonic reactions were often known as spontaneous reaction. since they can take place without the expenditure of energy.
What is exergonic reactions?
A reaction wherein energy is emitted mostly in presence of light or heat was known as just an exothermic reaction.
What is spontaneous reaction?
A spontaneous process would be one that happens without the system receiving any outside input.
Because exergonic events could proceed without the supply of energy, they are sometimes known as spontaneous reactions. The products possess greater free energy as compared to the reactants example. Endergonic reactions were non-spontaneous, which means they require the addition of energy before they can begin.
To know more about spontaneous reactions and exergonic reactions
https://brainly.com/question/13790391
#SPJ2
Amino acids that must be obtained through the diet are called O A) cholesterol. OB) non-essential amino acids. o C) essential amino acids. The OD) peptides.
Answer:
I belive C: essential amino acids
Explanation:
They can t be made from the body so they must be obtained my food
The bottle slides down the hill and is moving at a velocity of 14 meters/second the instant it hits the ground. The vertical height from where Jeff dropped the bottle is meters. Ignore friction, and use , PE = m × g × h, and g = 9.8 m/s2.
Answer:
10 m
Explanation:
From the question given above, the following data were obtained:
Velocity (v) = 14 m/s
Acceleration due to gravity (g) = 9.8 m/s²
Height (h) =?
Next, we shall determine the energy. This can be obtained as follow:
Velocity (v) = 14 m/s
Kinetic Energy (KE) =?
KE = ½mv²
KE = ½ × m × 14²
KE = ½ × m × 196
KE = m × 98
Finally, we shall determine the height. This can be obtained as follow:
Kinetic energy (KE) = m × 98
Acceleration due to gravity (g) = 9.8 m/s²
Height (h) =?
Since the object is falling from a particular height,
Potential energy (PE) = kinetic energy (KE)
PE = mgh
KE = m × 98
m × 9.8 × h = m × 98
Divide both side by m × 9.8
h = m × 98 / m × 9.8
h = 10 m
Thus, the bottle was dropped from a height of 10 m
Match the reaction to the type that best describes it.
2HCl → H2 + Cl2
?
Combination
NaF + KBr →
NaBr + KE
?
Decomposition
Mg + MnCl2 →
-Mn + MgCl2
?
Single replacement
2Na + 02 →
Na2O2
?
Double replacement
Answer:
2HCl → H2 + Cl2 = decomposition
NaF + KBr → NaBr + KF = double replacement
Mg + MnCl2 → Mn + MgCl2 = single replacement
2Na + 02 → Na2O2 = combination
Explanation:
A chemical reaction involves the conversion of one or more substances called REACTANTS into other substances called PRODUCTS. There are different types of reactions depending on how it occurs, they include:
- Combination or synthesis reaction is a type of reaction in which two or more elements combine to form a single product. Example is:
2Na + 02 → Na2O2
- Single replacement is a type of reaction where one element is replaced by another in a compound or molecule. Example below shows that Manganese (Mn) is replaced by magnesium (Mg):
Mg + MnCl2 → Mn + MgCl2
- Double replacement is a type of reaction where two elements are replaced by other elements at a time. Example is:
NaF + KBr → NaBr + KF
- Decomposition is a type of reaction in which one molecule or compound is broken down into two or more products. Example is:
2HCl → H2 + Cl2
How do you think you results would be affected if using K2Cr2O7/H2SO4 as the oxidizing agent instead of KMnO4
Answer:
Due to weak oxidizing agent.
Explanation:
In my opinion the results would be affected if using K2Cr2O7/H2SO4 as the oxidizing agent instead of KMnO4 because K2Cr2O7/H2SO4 is weak oxidizing agent as compared to KMnO4. An oxidizing agent is a substance that has the ability to oxidize other substances means that accept their electrons so that's why the results of strong oxidizing agent is different than weak oxidizing agent.
The results of the reaction will be affected due to the difference in :
Oxidizing agent strength
The use of K₂Cr₂O7 / H₂SO₄ which is weaker oxidizing agent in the reaction will produce a different result from the use of KmnO₄ which is a stronger oxidizing agent.
This is because stronger oxidizing agents in reaction readily accept electrons from reactants while weaker oxidizing agents do not readily accept electrons from substances reacting in the reaction.
Therefore we can conclude that The results of the reaction will be affected due to the difference in oxidizing agent strength
Learn more : https://brainly.com/question/16450420
Although your question is incomplete a general solution is provide within the scope of your question
Find the mass in grams of 15.00 moles of AICI:
Answer:
937.5g
Explanation:
No of moles = mass ÷ molar mass
According to this question, there are 15moles of the compound; AlCl
Molar mass of AlCl = 27 + 35.5
= 62.5g/mol
Using n = m/M.M
15 = m/62.5
m = 15 × 62.5
m = 937.5g
Help me please guys
Answer:
D. 2
Explanation:
On the right side of the equation:
Al has 1, Zn has 3, NO3 has 6
But on the left side:
Al has 1, Zn has 1, NO3 has 3
1. So, if we add a coefficient of 2 to Al(NO3)3, then NO3 now has 6-which is what it needs.
2. But now the Al on the right side of the equation is not balanced, so give it a coefficient of 2.
3. To make the Zn balance, just add a coefficient of 3 on the left side of the equation.
Which leaves us with:
2Al + 3Zn(NO3)2 --> 2Al(NO3)3 + 3Zn
And now there are the same number of each compound on both sides of the equation.
Good luck! If you have any questions on this answer leave a comment :)
convert 300g into kg
Answer:
0.3kg
Explanation:
HELP ASAP Choose three sections of the electromagnetic spectrum. Rank them in order of energy. Give an example of how they are used for each.
Diego is trying to lift a piano to the second floor of his house. Diego uses a pulley system and gives a big lift to the piano.The piano moves upward, then stops, and then it starts to fall to the ground. (The direction of the force of gravity is negative.) Which list best describes the forces on the piano in the proper order
Answer:
positive force → balanced force → negative force
Explanation:
np
Answer:
positive force → balanced force → negative force
Explanation:
:)))
5.34x10 to the 27th power molecules of sulfur hexafluoride to moles of sulfur hexafluoride
Answer:
8.87 × 10³ moles.
Explanation:
To convert number of molecules of sulfur hexafluoride (SF6) to moles (n), we divide by Avogadro's number (6.02 × 10²³)
That is; n = N ÷ nA
According to the question, 5.34 x 10^27 molecules of SF6 was given in this question. Hence, the number of moles it contains is given as:
n = 5.34 x 10^27 ÷ 6.02 × 10²³
n = 5.34/6.02 × 10^ (27-23)
n = 0.887 × 10⁴
n = 8.87 × 10³ moles.
1. Which of the following species exhibit tetrahedral geometry?
a. CCl4 b. PCI5 c. NH3 d. CO2
2. Which statement correctly describes the Valence Shell Electron Pair Repulsion (VSEPR) Theory? The valence electron pairs are__________.
a. The valence electron pairs are given by the group number in the periodic table.
b. The valence electron pairs are the outermost electrons of the atom that areinvolved in the bonding.
c. The valence electron pairs repel one another and tend to stay as far apart aspossible.
d. The valence electron pairs are the lone pairs of the atom.
3. Which of the following statements about resonance is TRUE?
I. Resonance hybrids occur because a compound changes back and forth between two or more resonancestructures
II. Resonance structures differ in the arrangement of electrons but not in the arrangement of atoms.
III. Resonance hybrids contain delocalized electrons.
IV. Resonance structures for a given compound always contribute equally to the resonance hybrid.
V. Resonance structures occur when there are two or more valid Lewis structures for a given compound.
VI. Resonance hybrids are a composite of resonance structures.
a.I, II, V, VI
b. II, III, IV, VI
c. II, III, V, VI
d. II, IV, V, VI
4. How many resonance forms will nitrate ion (NO3) have?
a. - 1 b. 1 c. 2 d. 3
5. What is the first noble gas?
a. Xenon b. Radon c. Helium d. Krypton
6. What is the principle used for filling of atomic orbitals?
a. Azimithual Principle
b. Hund's Principle
c. Pauling's Exclusion Principle
d. Aufbau Principle
7. How many electrons can "m" shell accommodate?
a. 16 b. 17 c. 18 d. 19
8. What number of shells used for the accommodation of electrons in an atom? a. one b. two c. three d. four
9. What distribution does the electron configuration describe?
a. protons
b. neutrons
c. electrons
d. ions
10. How many total electrons can the "p" orbitals hold?
a. 3 b. 1 c. 7 d. 6
11. Who are the founding fathers of Quantum Mechanics?
a. Werner Karl Heisenberg
b. Isaac Newton
c. Erwin Schrodinger
d. a and c
12. There are _types of quantum numbers.
a. 2 b. 4 c. 5 d. 7
13. Which of the following elements can only form one bond in a Lewis structure? a. H b. O c. Al d. N
14. Which rule states that electron will go into empty orbitals of the same energy before entering into an orbital with an electron present?
a. Hand's rule
b. Hund's rule
c. Pauli Exclusion Principle
d. Aufbau Principle
15. What is the definition of diamagnetic atom?
a. An atom where all of the electrons are paired
b. An atom where some of the electrons are paired.
c. An atom where none of the electrons are paired.
d. An atom attracted to a magnetic field.
Answer:
a
Explanation:
Its because ammonium has thee hydrogen atoms
How does the alcohol enter the body? Describe the process. Where does most of the absorption take place?
Explanation: Once swallowed, a drink enters the stomach and small intestine, where small blood vessels carry it to the bloodstream. Approximately 20% of alcohol is absorbed through the stomach and most of the remaining 80% is absorbed through the small intestine.
what is the formula of silver sulphate
Answer:
Ag2SO4
Explanation:
Write a Lewis structure that obeys the octet rule for each molecule or ion. Include resonance structures if necessary and assign formal charges to each atom.
Answer:
A structure that obeys the octet rule for each molecule or ion is [tex]XeO_4[/tex]
Explanation:
Here in [tex]XeO_4[/tex] , Xenon has 8 valence electrons and each oxygen atom has 6 valence electrons
Lewis structure for [tex]XeO_4[/tex] is shown below :
Here , all atoms are having their complete octet .
All the atoms in this Lewis structure is having their complete octet .
Resonance structure is not required as all atoms are same that is oxygen .
Methane is approximately 23 times more powerful than carbon dioxide as a greenhouse gas. Which are significant sources of methane emissions
Answer:
anthropogenic sources like landfills, agricultural activities,coal mining and combustion and some sources are natural ones
what is a saturted solution
Answer:
Please find the definition and further explanation below
Explanation:
Based on the ability for the solvent (liquid substance) to dissolve a solute (solid substance), a solution can either be unsaturated, saturated or supersaturated. A SATURATED SOLUTION is that which contains the maximum amount of solute a solvent can possibly dissolve.
In other words, a saturated solution can no longer dissolve anymore solute, and hence, any further solute added forms crystals or makes the solution supersaturated.
in heating a kettle of water on an electric stove, 3.34×10^3 J of thermal energy was provided by the element of the stove. yet, the water in the kettle gained only 5.95×10^2 J of thermal energy. determine the percent efficiency of the electrical element in heating the kettle of water
Answer:
The percentage efficiency of the electrical element is approximately 82.186%
Explanation:
The given parameters are;
The thermal energy provided by the stove element, [tex]H_{supplied}[/tex] = 3.34 × 10³ J
The amount thermal energy gained by the kettle, [tex]H_{absorbed}[/tex] = 5.95 × 10² J
The percentage efficiency of the electrical element in heating the kettle of water, η%, is given as follows;
[tex]\eta \% = \dfrac{H_{supplied} - H_{absorbed} }{H_{supplied}} \times 100[/tex]
Therefore, we get;
[tex]\eta \% = \dfrac{3.34 \times 10^3 - 5.95 \times 10^2}{3.34 \times 10^3} \times 100 = \dfrac{549}{668} \times 100 \approx 82.186 \%[/tex]
The percentage efficiency of the electrical element, η% ≈ 82.186%.
The carbonyl carbon in a ketone is attacked primarily by the peroxy oxygen bonded to hydrogen as opposed to the peroxy oxygen bonded to carbon because:
Answer:
This is because peroxy oxygen bonded to hydrogen can easily undergo nucleophilic protonation with the carbonyl carbon to form an alcohol
Explanation:
A ketone is a functional group that contains a carbonyl group (carbon-oxygen double bond ( R1R2-C=O).
The carbonyl carbon doubly bonded to the oxygen is electron deficient as a result of difference in electronegativity between carbon and oxygen, hence is susceptible to nucleophilic attacks
R1R2 - C = O
where R1 and R2 are organic substituents.
The peroxy oxygen that is bonded to hydrogen (H -O-O-R) is the electron-rich centre and easily attacks electron-deficient centres like the carbonyl carbon in ketones to form an alcohol.
The bond between the hydrogen attached to the peroxy oxygen is broken and the resultant hydrogen ion undergoes protonation with the oxygen of the carbonyl group to form an alcohol
R1R2 - C = O + H - O-O - R =>
R1R2- CH - OH + R - O-O-R1
Calculate the average atomic mass for element X.
(Please HELP)
Na3N decomposes to form sodium and nitrogen gas at STP. If 13.7 L of nitrogen is produced
how many moles of Na3N was used? (22.4 L = 1 mole of any gas)
2Na3N --> 6Na + N2
Answer: 1.224 moles of [tex]Na_3N[/tex] were used.
Explanation:
We are given:
Volume of nitrogen gas produced = 13.7 L
At STP conditions:
22.4 L of volume is occupied by 1 mole of a gas
Applying unitary method:
13.7 L of nitrogen gas will be occupied by = [tex]\frac{1mol}{22.4L}\times 13.7L=0.612mol[/tex]
For the given chemical reaction:
[tex]2Na_3N\rightarrow 6Na+N_2[/tex]
By Stoichiometry of the reaction:
1 mole of nitrogen gas is produced by 2 mole of [tex]Na_3N[/tex]
So, 0.612 moles of nitrogen gas will be produced from = [tex]\frac{2}{1}\times 0.612=1.224mol[/tex] of [tex]Na_3N[/tex]
Hence, 1.224 moles of [tex]Na_3N[/tex] were used.
HELP HELP HELP PLSSS
Answer:
the answer is c kept in blue and with light
