A body has masses of 0.013kg and 0.012kg in oil and water respectively, if the relative density of oil is 0.875, calculate the mass of the body

Answer:56

Explanation: I did the test

Answer:

The assertion is true and reason is false.

Explanation:

Assertion: I P+ Q I = I P- QI, then P must be perpendicular to Q.

Reason : The relation will hold even when Q is a null vector.

Now

[tex]\left | P + Q \right |=\left | P - Q \right |\\\\P^2 + Q^2 + 2 P Q cos \theta =P^2 + Q^2 - 2 P Q cos \theta\\\\4 P Q cos \theta = 0 \\\\cos \theta = 0 \\\\\theta = 90 degree[/tex]

So, P and Q are perpendicular to each other.

So, the assertion is true.

Reason is false.

Answer:

Explanation:

First I need to tell you that I used .20 s for the period of rotation instead of just .2, and I used 30.0 kg for the mass instead of just 30. The reason being that both those numbers as stated in the problem only have 1 significant digit and that's not generally enough to get the accuracy you're looking for. Adding a 0 to the ends of each of those numbers doesn't change the value of the numbers, only the number of sig fig's in each. Beginning with a:

a. [tex]f=\frac{1}{T}[/tex] so [tex]f=\frac{1}{.2}[/tex] and f = 5.0 Hz

b. The circumference is the distance around the outside of the washer's drum. We need to find that, but before we do, I'm going to state the radius in meters instead of cm. 35 cm = .35 m. Therefore,

C = 2(3.1415)(.35) so

C = d = 2.2 m

c. The speed of the washer is found in d = rt, where r is the rate and our velocity and d is the distance around the outside of the drum (circumference). Therefore,

2.2 = v(.20) so

v = 11 m/s

d. The centripetal acceleration has an equation

[tex]a_c=\frac{v^2}{r}[/tex] so

[tex]a_c=\frac{(11)^2}{.35}[/tex] and

[tex]a_c=\frac{121}{.35}[/tex] so

[tex]a_c=350\frac{m}{s^2}[/tex]

e. The centripetal force has an equation

[tex]F_c=\frac{mv^2}{r}[/tex] and

[tex]F_c=\frac{(30.0)(11)^2}{.35}[/tex] and

[tex]F_c=[/tex] 1.0 × 10⁴ N

f. The equation for Power is

[tex]P=\frac{W}{t}[/tex] where W is work and W = FΔx (force times displacement). Therefore,

[tex]P=\frac{(1.0*10^4)(2.2)}{.20}[/tex] so

P = 1.1 × 10⁵ Watts

Answer:

below

Explanation:

that is the procedure above

Explanation:

[tex]we \: know \: that \: joule \: is \: the \: unit \: of \\ energy \: we \: have \: energy = \frac{1}{2} m {v}^{2} \\ unit \: of \: this \: is \\ joule = kg {( \frac{m}{ s }) }^{2} \\ thank \: you[/tex]

Answer:

[tex]T=8.33A[/tex]

Explanation:

From the question we are told that:

Number of battery [tex]n=10[/tex]

Voltage source[tex]E=12V[/tex]

Lamp Power[tex]P=10W[/tex]

Generally the equation for Resistance is mathematically given by

 [tex]R=\frac{V^2}{P}[/tex]

 [tex]R=\frac{12^2}{10}[/tex]

 [tex]R=14.4ohms[/tex]

Therefore

 [tex]R_{eq}=\frac{14.4}{10}[/tex]

 [tex]R_{eq}=1.44[/tex]

Generally the equation for Current is mathematically given by

 [tex]T=\ffrac{V}{Req}[/tex]

 [tex]T=\frac{12}{1.44}[/tex]

 [tex]T=8.33A[/tex]

Answer:

The measurement of first cylinder is more accurate.(A)

Explanation:

The least possible error higher will be accuracy.

Answer:

[tex]V.E=498.02m/s^2[/tex]

Explanation:

From the question we are told that:

Radius [tex]r=301Km[/tex]

Gravitational acceleration [tex]g=0.412 m/s^2[/tex]

Generally the equation for Escape velocity is mathematically given by

 [tex]V.E^2=2gr[/tex]

 [tex]V.E^2=2*0.412m/s^2*301000[/tex]

 [tex]V.E^2=248024[/tex]

 [tex]V.E=\sqrt{248024}[/tex]

 [tex]V.E=498.02m/s^2[/tex]

Answer:

[tex]N_B-W_B = 0[/tex]

Explanation:

There are two forces acting on object B. If we consider the law of equilibrium, then the two forces must be equal in magnitude, for the object to remain in equilibrium position:

[tex]N_B = W_B\\\\N_B-W_B = 0[/tex]

Therefore, the correct answer of the given question, from the given choices, is:

[tex]N_B-W_B = 0[/tex]

Answer:

:) :) :) :) :) :) :) :) :)

Explanation:

:) :) :) .......

Answer:

The gravitational potential energy (gpe) possessed by an object or body is directly proportional to the height of the object or body.

Explanation:

Gravitational potential energy (GPE) is an energy possessed by an object or body due to its position above the earth.

Mathematically, gravitational potential energy is given by the formula;

G.P.E = mgh

Where;

G.P.E represents potential energy measured in Joules.

m represents the mass of an object.

g represents acceleration due to gravity measured in meters per seconds square.

h represents the height measured in meters.

Generally, the gravitational potential energy (gpe) of an object or body is directly proportional to the height of the object or body. Thus, the gravitational potential energy of a body increases as the height of the body increases.

In conclusion, an object with a higher height would have a higher gravitational potential energy.

the order of vector addition doesn't affect the resultant vector and grouping or order of pair doesn't effect the sum.

Answer:

In a parallel combination of electrical appliances total electric power will increase

Answer is A it will increase

Answer:

Yes it would be different on Earth and the moon

Answer:

yes

Explanation:

Answer:

Both have equal impulse.

Explanation:

Let the mass of cars be m.

Then the Force acting on each of them for taking them to state of rest:

(Using Newton's second law of motion)

[tex]F_A=\frac{m\times (0-30)}{\Delta t_A}[/tex]

[tex]F_A=-30\frac{m}{\Delta t_A}[/tex] ...................................(1) (negative sign is associated with direction, here we are concerned about the magnitude only)

[tex]F_B=\frac{m\times (0-30)}{\Delta t_B}[/tex]

[tex]F_B=-30\frac{m}{\Delta t_B}[/tex] ...................................(2)

[tex]\because \Delta t_A<\Delta t_B[/tex]

[tex]\therefore F_A>F_B[/tex]

We know that impulse is given as:

[tex]J=F\times \Delta t[/tex] ........................................(3)

So, from eq. (1), (2) & (3)

[tex]J_A=F_A\times \Delta t_A[/tex]

[tex]J_A=-30m[/tex]

&

[tex]J_B=F_B\times\Delta t_A[/tex]

[tex]J_B=-30m[/tex]

Hence both have equal impulse.

Answer:

Option (a) is correct.

Explanation:

The electric charge is the inherent property of matter which appears due to the deficiency of charge or the excess number of electrons.

There are two types of charges, positive and negative.

When an object has deficiency of charge it becomes positive charge and when it gains some electrons, it becomes negative charge.

When the charge is in motion, it is called electric current and when the charge is at rest, it is called static current.

A charge at rest contributes the electric field only while the charge is in motion contributes the electric and magnetic field both.

Explanation:

soln,

weight=600N

mass=?

gravity=9.8 m/s²

now,

hope it helps.

Answer:

m = 61.22 kg

Explanation:

F = 600 N

g = 9.8 m/s²

m = ?

F = mg

600 = m(9.8)

---> m = 61.22 kg

Answer:

The experimental scientist

Answer:

the combination,decomposition or replacement that occurs in the molecules of matter during chemical change called chemical reaction

Answer:

A chemical change happens when one chemical substance is transformed into one or more different substances, such as when iron becomes rust. ... A chemical change is different from a physical change, which doesn't rearrange atoms or molecules and produce a completely new substance.

Answer:

In coin card experiment smooth card is used so that the card can slide easily from glass

Answer:

that is a correct answer maybe .

Other person is incorrect, I did the test on edg.

Answer:  

A. by providing water for irrigation and restoring trees to areas where forests once existed

The construction of dams positively affect natural resources by providing water for irrigation.

Natural resources serves as materials thst is found in nature which are used by humans. These natural substances are soil, water.

Therefore, building of dams can help irrigation by using water which is a natural resources.

Learn more about natural resources at;

https://brainly.com/question/24623157

Answer:

A

Explanation:

The first thing you have to do is go back and list the resistances correctly. R1 = 20 R2 = 30 and R3 = 10.

Leave the units off if you can't make an omega.

The resistance of a series circuit (that's what this is) is r1 + r2 + r3 = 10 + 20 + 30 = 60 ohms

Now use ohms law.

R = 60 ohms

V = 110 volts.

I = V / R

I = 110/60

I = 1.833 to the nearest 1/10 = 1.8

The Earth orbits around the sun because the gravitational force that the sun

exerts on the Earth:

O A. causes Earth's acceleration toward the sun.

O B. is very small because the sun is so far from the Earth.

O c. is smaller than the force the Earth exerts on the sun.

O D. pushes the Earth away from the sun.

O A. causes Earth's acceleration toward the sun.

I hope this helps, have a nice time ahead!

Answer:

a. 164°F

b. [tex]91.\overline 1 \ ^{\circ} C[/tex]

c. [tex]140.\overline 4[/tex] kJ

Explanation:

The starting temperature of the water, T₁ = 48F

The temperature at which the water boils, T₂ = 212°F

a. The difference between the initial and the boiling water temperature, ΔT = T₂ - T₁

Therefore;

ΔT = 212°F - 48°F = 164°F

The temperature by which he temperature must be raised, ΔT = 164°F

b. 48°F = ((48 - 32)×5/9)°C = (80/9)°C = [tex]8.\overline 8 \ ^{\circ} C[/tex]

212°F = ((212 - 32)×5/9)°C = 100°C

∴ ΔT = 100°C - [tex]8.\overline 8 \ ^{\circ} C[/tex] = [tex]9.\overline 1 \ ^{\circ} C[/tex]

c. The heat capacity of the water = The heat required to increase four quartz of water by 1 °C = 15.8 kJ

∴ The heat required to raise four quartz of water by [tex]9.\overline 1 \ ^{\circ} C[/tex], ΔQ = 15.8 kJ/°C × [tex]9.\overline 1 \ ^{\circ} C[/tex] = [tex]140.\overline 4[/tex] kJ.

Answer:

Explanation:

mass and distance

Answer:

Explanation:

Assuming the squirrel is jumping off the ground, here's what we know but don't really know...

v₀ = 4.0 at 50.0°

So that's not really the velocity we are looking for. We are dealing with a max height problem, which is a y-dimension thing. Therefore, we need the squirrel's upward velocity, which is NOT 4.0 m/s. We find it in the following way:

[tex]v_{0y}=4.0sin(50.0)[/tex] which gives us that the upward velocity is

v₀ = 3.1 m/s

Moving on here's what we also know:

a = -9.8 m/s/s and

v = 0

Remember that at the very top of the parabolic path, the final velocity is 0. In order to find the max height of the squirrel, we need to know how long it took him to get there. We are using 2 of our 3 one-dimensional equations in this problem. To find time:

v = v₀ + at and filling in:

0 = 3.1 - 9.8t and

-3.1 = -9.8t so

t = .32 seconds.

Now that we know how long it took him to get to the max height, we use that in our next one-dimensional equation:

Δx = [tex]v_0t+\frac{1}{2}at^2[/tex] and filling in:

Δx = [tex]3.1(.32)+\frac{1}{2}(-9.8)(.32)^2[/tex] and using the rules for adding and subtracting sig fig's correctly, we can begin to simplify this:

Δx = .99 - .50 so

Δx = .49 meters

Answer:

the correct answer is B

Explanation:

To solve the system they must have the same amount of unknowns as equations,

a) If the system does not have friction, we must write the x-axis equation for each body, therefore we need to write N equations

b) if the system has friction, two equations are needed for each particle

therefore the correct answer is B

Answer:

F = 0.414 N

Explanation:

Given that,

Magnetic flux density,[tex]B=3.6\times 10^{-2}\ T[/tex]

The length of the wire, l = 24 m

Current, I = 0.48 A

We need to find the force acting on the wire. The formula for the force is given by:

[tex]F=ILB[/tex]

Put all the values,

[tex]F=0.48\times 24\times 3.6\times 10^{-2}\\\\F=0.414\ N[/tex]

So, the force acting on the copper wire is equal to 0.414 N.

The magnetic force of the copper wire is  41.472 N.

The magnetic force of the copper wire is calculated by applying the following equation.

F = BIL x sinθ

Where;

F = (3.6 x 10⁻²) x (48) x 24 x sin(90)

F = 41.472 N

Thus, the magnetic force of the copper wire is  41.472 N.

Learn more about magnetic force here:  https://brainly.com/question/13277365