A car moves 20 km towards the North and then 35 km at an angle of 60o towards west of North. Its magnitude of displacement from the initial position will be

Answers

Answer 1

Answer:

15

Explanation:

displacement = initial position - final position


Related Questions

Pls help asap!!

A bucket contains hot water at 95°c. A man wants to bath with water at 40°c. What is the ratio of the mass of hot water to the mass of cold water that he needs.​

Answers

Answer:

55

Explanation:95-40=55

i hope i did the math right if i didnt please tell me

An object moving north with an initial velocity of 14 m/s accelerates 5 m/s2 for 20 seconds. What is the final velocity of the object?
39 m/s
90 m/s
114 m/s
414 m/s

Answers

Answer:

option C

Explanation:

Final velocity of the object is 114 m / s. Hence, final velocity of the object is 114 m / s.

Here is the answer ! Hope it helps.

Write down the role played by four digestive juices in digestion and the
organs which secrete them.

Answers

Answer:

Digestive juices secreted by various organs such as salivary glands in the mouth, stomach, liver and pancreas help in the process of digestion of food. Saliva secreted by the salivary glands in the mouth aids in the breakdown of starch present in the food to simple sugar

Explanation:

A sound frequency 100Hz and wavelength 3.34m is travelling through air, calculate the Velocity of sound in air.

Answers

Answer:

334m/s

Explanation:

If you take the data you gave and insert it into the equation f=v/λ the frequency would come out to be 3.34m

334 m/s is  the Velocity of sound in air.

What is the velocity of a wave?

Wave velocity in common usage refers to speed, although, properly, velocity implies both speed and direction.

The velocity of a wave is equal to the product of its wavelength and frequency (number of vibrations per second) and is independent of its intensity.

Mathematically , v=fλ

According to the question,

Sound frequency (f)  = 100Hz

Wavelength (λ)= 3.34m

Computing the values in the formula,

v=fλ

v = 100Hz x 3.34m

v= 334m/s

Therefore,

Velocity of sound in air is 334 m/s.

Learn more about  velocity of a wave here:

https://brainly.com/question/1292129

#SPJ2

if the pelican in item 3 was traveling at the same speed but was only 2.7m above the water, how far would the fish travel horizontally before hitting the water?​

Answers

Answer:

5.66 m

Explanation:

From online sources, the speed in item 3 being referred to was discovered to be 7.62 m/s

Now, let's get the time of flight from one of Newton's equation of motion;

S = ut + ½gt²

Considering the vertical component, we have u = 0 m/s.

Thus;.

S = ½gt²

Plugging in the relevant values;

2.7 = ½ × 9.8 × t²

t² = 2.7/4.9

t = √(2.7/4.9)

t = 0.7423 s

Now, when we consider the horizontal component of the motion, we have;

S = vt

Where;

S is the distance the fish will travel horizontally before hitting the water.

v = 7.62 m/s

t = 0.7423

Thus

s = 7.62 × 0.7423

s ≈ 5.66 m

A cricketer throws a ball sideways with an initial velocity of 30 m/s. She releases the ball from a height of 1.3m. Calculate how far the ball travels before hitting the ground.

Answers

Answer:

78.34

Explanation:

1.3/30=78.3m

An electron enters the magnetic field at right angle from left B into paper. The electron will be deflected?

Answers

Answer:

According to this direction of force is perpendicular to the direction of current and magnetic field. Therefore force is opposite to electron into the paper at 90°.

Which wave has the smallest amplitude?

Answers

Answer:

C. C

Explanation:

A wave can be defined as a disturbance in a medium that progressively transports energy from a source location to another location without the transportation of matter.

In Science, there are two (2) types of wave and these include;

I. Electromagnetic waves: it doesn't require a medium for its propagation and as such can travel through an empty space or vacuum. An example of an electromagnetic wave is light.

II. Mechanical waves: it requires a medium for its propagation and as such can't travel through an empty space or vacuum. An example of a mechanical wave is sound.

A crest can be defined as the highest (vertically) point on a waveform.

On a related note, a trough is the lowest (vertically) on a waveform.

An amplitude can be defined as a waveform that's measured from the center line (its origin or equilibrium position) to the bottom of a trough or top of a crest. Thus, the vertical axis (y-axis) is the amplitude of a waveform i.e it's measured vertically.

In this scenario, waveform C which is represented by a blue curvy line has the smallest amplitude in comparison with the other waveforms because it has the minimum height when measured from the origin.

In contrast, waveform A represented by a purple line has the highest amplitude because it has the maximum height when measured from the origin.

Mathematically, the amplitude of a wave is given by the formula;

x = Asin(ωt + ϕ)

Where;

x is displacement of the wave measured in meters.A is the amplitude.ω is the angular frequency measured in rad/s.t is the time period measured in seconds.ϕ is the phase angle.

Answer:

The answer is indeed D as the comment above suggests.

Explanation:

Simply put, wave D's highest point is closer to the line than all of the other high points of A, B and C

What is the relationship between electric field lines and equipotential lines that you observed in doing the lab

Answers

Answer:

Explained below

Explanation:

Generally speaking, we know in physics that Electric field lines are lines which usually start at positive charges and deflect away from them to terminate at the negative charges. Meanwhile Equipotential lines are lines that are used to connect points located on the same electric potential.

Finally, in conclusion, electric field lines are usually lines that go through in a perpendicular manner across every equipotential lines.

Which of the following is evidence for continental drift?

Answers

They based their idea of continental drift on several lines of evidence: fit of the continents, paleoclimate indicators, truncated geologic features, and fossils.

absolute potential difference ,due of point charge of 1C at a distance of 1 m is given by

Answers

Answer:

[tex] \implies U = \dfrac{kq}{r} [/tex]

[tex]\implies U = \dfrac{9 \times {10}^{9} \times 1}{1} [/tex]

[tex]\implies U = 9 \times {10}^{9} \: J[/tex]

We have that absolute potential difference ,due of point charge of 1C at a distance of 1 m is given by

[tex]\rho=9x10 ^{10}J[/tex]

From the question we are told that

point charge of 1C at a distance of 1 m

Generally the equation for the Electrostatic potential energy  is mathematically given as

[tex]\rho=\frac{kq_1q_2}{r}[/tex]

Where k is a constant

[tex]k=9*10^9Nm^2/c^2[/tex]

Therefore

[tex]\rho=\frac{(9*10^9)1*10^(-6)*1*10^{-6}}{1}[/tex]

[tex]\rho=9x10 ^{10}J[/tex]

For more information on this visit

https://brainly.com/question/12319416?referrer=searchResults

.
What is the equation for work?

Work = force / distance

Work = force - distance

Work = force + distance

Work = force * distance

Answers

work = force* distance

Answer:

Work = F X D

Explanation:

Work (J) equals Force (N) multiplied by Distance (M)

which is part of the convection cycle in earths atmosphere?

a. hot, denser air rises
b. cold, denser air rises
c. hot, less-dense air rises
d. cold, less-dense air falls

Answers

I believe it’s C. hot, less-dense air rises

I hope this helps !!!!!!!!

Why do scientists not use US customary units when reporting their data?

Answers

One of the scientist's jobs is to report the results of his experiments to all the other scientists in the world.

There isn't a single real science shop anywhere in the world that uses the US customary system of units. Not one.

Even in the measly three countries that use it for measuring carpet, pumping gas, and weighing fish ... Myanmar, Liberia, an the USA ... the scientists do their work in the SI/MKS/metric system.


A particular electric car is supplied with 300 kJ of chemical energy by the battery. Of this, a total of 70.5 kJ of energy is wasted as heat.
Calculate the overall efficiency of the electric car.

Answers

Supplied energy=300kJ

Wasted energy=70.5J

Used energy:-

[tex]\\ \sf\longmapsto 300-70.5=229.5kJ[/tex]

We know

[tex]\boxed{\sf Efficiency=\dfrac{Used\:Energy}{Supplied\:Energy}\times 100}[/tex]

[tex]\\ \sf\longmapsto Efficiency=\dfrac{229.5}{300}\times 100[/tex]

[tex]\\ \sf\longmapsto Efficiency=\dfrac{229.5}{3}[/tex]

[tex]\\ \sf\longmapsto Efficiency=76.5\%[/tex]

The overall efficiency of the electric car = 76.5 %

To find the efficiency the given values are:

Energy supplied = 300 kJ

Energy wasted = 70.5 kJ

Define efficiency and calculate the value of efficiency.

      In the system the output energy is compared to the input energy is known as efficiency. That can be written as percentage ratio of output energy to the input energy.

Formula of efficiency is,

             Efficiency = ( E out / E in ) × 100

Here, Energy supplied = 300 kJ

so, energy used = Energy supplied - Energy wasted

                           = 300 - 70.5

                           =  229.5 kJ

Thus, substituting E out = 300 kJ , E in = 229.5 kJ

            Efficiency = ( 229.5 / 300 ) ×100

                             = 229.5 / 3

                             = 76.5

Hence, The overall efficiency of the electric car is 76.5 %

Learn more about efficiency,

https://brainly.com/question/6834807

#SPJ5

20. A semiconductor is a
crystalline solid that conducts current under any condition
metallic solid that conducts current under any condition
metallic solid that conducts current under certain conditions
crystalline solid that conducts current under certain conditions

Answers

Answer:

D. crystalline solid that conducts current under certain conditions

Explanation:

Semiconductors are crystalline solids that has the ability to conduct electrical currents but on certain conditions e.g heat. The conduction of semiconductors is less than that of conductors (metals) but more than insulators (nonmetals), hence, they are said to be intermediates of conductors and insulators in terms of electrical conductivity.

Examples of semiconductors are silicon, boron, carbon, germanium, arsenic etc.

A rectangular coil of wire, 22.0 cm by 35.0 cm and carrying a current of 1.40 A, is oriented with the plane of its loop perpendicular to a uniform 1.50-T magnetic field pointing into the plane of the loop. Let the loop be in x-y Cartesian plane so that the long and short sides of the loop are parallel to x- and y-axis, respectively. The loop center is at the origin of x-y Cartesian plane. Note that the magnetic field is in the direction of the negative z-axis.a. Calculate: (i) the net force that the magnetic field exerts on the coil; (ii) the torque about the z-axis that the magnetic field exerts on the coil.b. The plane of the coil is now rotated through +30º from its initial orientation (the x-y plane of the Cartesian coordinate system that remains the same). Calculate: (i) the net force that the magnetic field exerts on the coil; (ii) the torque about the rotation axis that the magnetic field exerts on the coil.

Answers

Answer:

a)  [tex]F_{net}=0[/tex]

b)  [tex]T=0[/tex]

Explanation:

From the question we are told that:

Dimensions:

[tex]L*B=22.0*35.0cm[/tex]

Current [tex]I=1.40A[/tex]

Magnetic field [tex]B=1.40[/tex]

Therefore

[tex]Area=L*B[/tex]

[tex]A=22.0*35.0cm[/tex]

[tex]A=770cm=>770*0^{-4}[/tex]

a)

Generally Force on Looping gives

[tex]F_1-F_2[/tex]

[tex]F_3=F_4[/tex]

Therefore

[tex]F_{net}=0[/tex]

b)

Generally the equation for Torque is mathematically given by

[tex]T=i*Asin \theta[/tex]

Since A and B are on opposite direction

[tex]\theta=180[/tex]

Therefore

[tex]T=1.40*770*10^{-4}sin 180[/tex]

[tex]T=0[/tex]

Two astronomy students travel to South Dakota. One stands on Earth’s surface and enjoys some sunshine. At the same time, the other descends into a gold mine where neutrinos are detected, arriving in time to detect the creation of a new radioactive argon nucleus. Although the photon at the surface and the neutrinos in the mine arrive at the same time, they have had very different histories. Describe the differences.

Answers

Answer:

The photon takes millions of years to reach the Surface of the sun while the Neutrinos travelling at the speed of light reaches the surface of the sun in approximately 2 seconds

The Photon is million year old while the neutrino is just some minutes old as observed by the student .

Explanation:

Although The Photon ( sunshine from the sun's surface ) heating up the student standing on the Earth's surface and the neutrinos discovered by the other student inside the gold mine are both formed in the Sun's core.

The difference between both are

The photon takes millions of years to reach the Surface of the sun while the Neutrinos travelling at the speed of light reaches the surface of the sun in approximately 2 seconds

The Photon is million year old while the neutrino is just some minutes old as observed by the student .

Why is a flower not a good blackbody radiator?

Answers

Answer:

A flower emits only visible light

A flower reflects much of the light that hits it

Convertir 25 km/h a m/s

Answers

Answer:

6.9 m/s

Explanation:

1000m = 1km

3600s = 1hr

25000m/3600s

6.9m/s

help with this physics question please :)

Answers

Answer:

is that rm in you profile pic

Cuánto demorará un cuerpo en alcanzar su máxima altura, sabiendo que fue lanzado, verticalmente hacia arriba, con una velocidad cuyo valor fue de 90 m/s?

Answers

Answer:

The maximum height reached is 413.27 m.

Explanation:

How long will it take for a body to reach its maximum height, knowing that it was thrown, vertically upwards, with a velocity whose value was 90 m / s?

initial velocity , u = 90 m/s

gravity, g = 9.8 m/s^2

Let the maximum height is h.

At maximum height the velocity v = 0

Use third equation of motion

[tex]v^2 = u^2 - 2 gh\\\\0 = 90\times 90 - 2 \times 9.8 \times h\\\\h = 413.27 m[/tex]

Why is it difficult to maintain constant speed of a vehicle?​

Answers

Answer:

The road surface is always rough, so the frictional force between the tires and the road surface make it difficult to maintain constant speed because acceleration always changes.

Hey there!

Yes, it's difficult to maintain a constant speed of a vehicle.

Explanation:

Because, roads surfaces are not always smooth, they are rough too, for which friction occurs.

Hope it help you

HELP ASAP
A. 1.09 A
B. 1.20 A
C.0.910 A
D. 0.830 A

Answers

Answer:

The answer should be: 1.20 A

Explanation:

Which is an outer planet?

Answers

Answer:

pluto

Explanation:

Dwarf because it is very minut

Answer:

I think Saturn.

Explanation:

I think the inner planets are Mercury, Venus, Earth and Mars whereas the outer ones are Jupiter, Saturn, Uranus and Neptune.

For saving lives, what is the most important safety feature on a car? A. Air bag B. Safety Belt C. Anti-lock brakes

Answers

i'd imagine the answer is safety belt, but i don't have anything to back that up with

For saving lives  the most important safety feature on a car is B. Safety Belt

What are safety features of  a car ?

Safety features of  a car is a feature of a product designed to ensure or increase safety.

Air bag and Anti-lock brakes are the supplemental protection and designed to work best with combination with seat bells.

Air bag reduce the chance that upper body or head will strike the vehicle's interior during a crash alongside with belt that will  also hold your upper body

so, the primary safety feature is seat belt and Air bag and Anti-lock brakes  comes in secondary safety feature  as they increases the safety and risk of getting an injury during any accident

correct answer is B. Safety Belt

learn more about Safety features

https://brainly.com/question/25820562?referrer=searchResults

#SPJ3

Is a nanoliter greater then one liter?

Answers

No, a nanoliter is one billionth of one liter

A parallel combination of a 1.47 μF capacitor and a 2.95 μF capacitor is connected in series to a 4.89 μF capacitor. This three‑capacitor combination is connected to a 15.5 V battery. Determine the charge on each capacitor.

Answers

Answer:

a. i. 35.96 μC  b. i. 11.98 μC ii. 24.04 μC

Explanation:

We need to find the total capacitance of the system C.

The total capacitance of the parallel combination of a 1.47 μF capacitor and a 2.95 μF capacitor is C' = 1.47 μF + 2.95 μF = 4.42 μF.

C' = 4.42 μF is in series with the 4.89 μF capacitor and for a series combination of capacitors, we have the total capacitance, C from

1/C = 1/4.42 μF + 1/4.89 μF

1/C = (4.42 μF + 4.89 μF)/(4.42 μF × 4.89 μF)

1/C = 9.31 μF/21.6138 μF²

C = 21.6138/9.31 μF

C = 2.32 μF

So, the total charge in the circuit Q = CV where C = total capacitance = 2.32 μF and v = voltage = 15.5 V

So, Q = CV

Q = 2.32 μF × 15.5 V

Q = 35.96 μC

i. The charge on the 4.89 μF capacitor

Since the 4.89 μF is in series with C', the total charge flowing i the circuit is the total charge in the 4.89 μF capacitor. So, its charge Q = 35.96 μC

b. The charge in the 1.47 μF and 2.95 μF capacitors.

To find the charge in the 4.89 μF and 2.95 μF capacitors, we need to find the voltage across the combined parallel combination of a 1.47 μF capacitor and a 2.95 μF capacitor. The voltage, V' across the 4.89 μF capacitor, since Q = CV', V' = Q/C = 35.96 μC/4.89 μF = 7.35 V

So, the voltage V" across the combined parallel combination of a 1.47 μF capacitor and a 2.95 μF capacitor, C' is V" = 15.5 V - V' (since V' + V" = 15.5 V).

So, V" = 15.5 V - V'

V" = 15.5 V - 7.35 V

V" = 8.15 V

i. The charge on the 1.47 μF capacitor

Using Q' = CV" where Q' = charge across capacitor, C = 1.47 μF and V" = 8.15 V.

So, Q' = CV"

Q' = 1.47 μF × 8.15 V

Q' = 11.98 μC

ii. The charge on the 2.95 μF capacitor

Using Q" = CV" where Q' = charge across capacitor, C = 2.95 μF and V" = 8.15 V.

So, Q" = CV"

Q" = 2.95 μF × 8.15 V

Q" = 24.04 μC

A 25.0 kg probe fell freely with acceleration of 2.00 m/s^2 just before it landed on a distant planet. What is the weight of the space probe on that planet

Answers

Answer:

The weight of the probe is 50 Newtons

Explanation:

Newtons second law states that F = ma

Given the mass of 25kg, and the acceleration of 2m/s^2, we can substitute both values into the equation to find the weight force.

[tex]F = ma[/tex]

[tex]F = 25 * 2[/tex]

[tex]F = 50N[/tex]

The weight of the probe is 50 Newtons

(d) Below shows a hydraulic press with a pump piston of area 4 cm2 and a ram area of

12 cm2 . IF A force of 300 N is applied on the pump piston, find:

(i)the maximum load on the ram.

(ii) the velocity ratio of the machine.

(iii) the mechanical advantage of the machine.

(iv)the efficiency of the machine.

Answers

Answer:

Explanation:

hi

Other Questions
Bill Johnson, sales manager, and Diane Buswell, controller, at Current Designs are beginning to analyze the cost considerations for one of the composite models of the kayak division. They have provided the following production and operational costs necessary to produce one composite kayak.Kevlar $250 per kayakResin and supplies $100 per kayakFinishing kit (seat, rudder, ropes, etc.) $170 per kayakLabor $420 per kayakSelling and administrative expensesvariable $400 per kayakSelling and administrative expensesfixed $119,700 per yearManufacturing overheadfixed $240,000 per yearBill and Diane have asked you to provide a cost-volume-profit analysis, to help them finalize the budget projections for the upcoming year. Bill has informed you that the selling price of the composite kayak will be $2,000.(a) Calculate variable costs per unit. Variable cost per unit $Bill Johnson, sales manager, and Diane Buswell, co (b) Determine the contribution margin per unit. Contribution margin per unit $Bill Johnson, sales manager, and Diane Buswell, co (c) Using the contribution margin per unit, determine the break-even point in units for this product line. Break-even point Bill Johnson, sales manager, and Diane Buswell, co units(d) Assume that Current Designs plans to earn $270,600 on this product line. Using the contribution margin per unit, calculate the number of units that need to be sold to achieve this goal.Number of units Bill Johnson, sales manager, and Diane Buswell, co units(e) Based on the most recent sales forecast, Current Designs plans to sell 1,000 units of this model. Using your results from part (c), calculate the margin of safety and the margin of safety ratio. (Round margin of safety ratio to 1 decimal place, e.g. 25.5%.)Margin of safety $Bill Johnson, sales manager, and Diane Buswell, co Margin of safety ratio Bill Johnson, sales manager, and Diane Buswell, co%By accessing this Question Assistance, you will learn while you earn points based on the Point Potential Policy set by your instructor.(a) Calculate variable costs per unit.Variable cost per unit $Bill Johnson, sales manager, and Diane Buswell, co(b) Determine the contribution margin per unit.Contribution margin per unit $Bill Johnson, sales manager, and Diane Buswell, co(c) Using the contribution margin per unit, determine the break-even point in units for this product line.Break-even point Bill Johnson, sales manager, and Diane Buswell, co units(d) Assume that Current Designs plans to earn $270,600 on this product line. Using the contribution margin per unit, calculate the number of units that need to be sold to achieve this goal. Number of units Bill Johnson, sales manager, and Diane Buswell, co units(e) Based on the most recent sales forecast, Current Designs plans to sell 1,000 units of this model. Using your results from part (c), calculate the margin of safety and the margin of safety ratio. (Round margin of safety ratio to 1 decimal place, e.g. 25.5%.)Margin of safety $Bill Johnson, sales manager, and Diane Buswell, coMargin of safety ratio Bill Johnson, sales manager, and Diane Buswell, co% What is the median for the set of data? 6, 7, 10, 12, 12, 13 Answer choices:6710121213 Find two numbers nearest to 8888888 which are exactly divisible by 2915 explain step by step A police officer investigating a car accident finds a skid mark of 115 ft in length.How fast was the car going when the driver hit the brakes?Round your answer to the nearest mile per hour. mph Help me please.. List the sides of the triangle in order from largest to smallest. What's 672 divided by 32 20 points!!!!! Plz answer quickly Can I please get help with these 2 questions about polygons A woman took contraceptive pills to prevent pregnancy. The pill inhibits secretions of the Follicle Stimulating Hormone(FSH) from the pituitary gland. Explain the effects of taking contraceptive pills on the menstrual cycle.I need an answer now... Pls help A car accelerates from 0 m/s to 25 m/s in 5 seconds. What is the average acceleration of the car. A solenoid has a length , a radius , and turns. The solenoid has a net resistance . A circular loop with radius is placed around the solenoid, such that it lies in a plane whose normal is aligned with the solenoid axis, and the center of the outer loop lies on the solenoid axis. The outer loop has a resistance . At a time , the solenoid is connected to a battery that supplies a potential . At a time , what current flows through the outer loop Ag,Au and Cu are called coinage metals why plzzzz hurry its urgent plzzz in a volcanic eruption molten magma rocks, ash and gases come up through a) gate b) vent c) pipe d) drain How can corruption be eliminated from the society? write any six points Write a program that randomly chooses among three different colors for displaying text on the screen. Use a loop to display 20 lines of text, each with a randomly chosen color. The probabilities for each color are to be as follows: white 30%, blue 10%, green 60%. Suggestion: Generate a random integer between 0 and 9. If the resulting integer falls in the range 0 to 2 (inclusive), choose white. If the integer equals to 3, choose blue. If the integer falls in the range 4 to 9 (inclusive), choose green. Test your program by running it ten times, each time observing whether the distribution of line colors appears to match the required probabilities. Need help on this activity!!In this activity, you will rearrange and solve a rational equation and find and use the inverse of a rational equation.As weve seen, for a circuit with two resistors arranged in parallel, we can calculate the total resistance in the circuit, , in ohms, with this equation.Question 1Part AQuestionRewrite the equation to represent the resistance of resistor 2, , in terms of and . You need a venue for your company's annual Salesconvention. Call a hotel in Dallas and find out about location (distance to stations, airports) number of rooms meeting rooms relaxation facilities.Arrange a meeting. You are busy on 26th May (p.m.)and 27th May. You are free on 28th May (p m.) Can somebody help me find the answer to this problem please ? PLEASE HELP!! URGENT