Explanation:
Gold (AU)................
How many moles of silver atoms are in the piece of jewelry?
The number of moles of silver atoms in the piece of jewelry is 0.08784 moles
Here is the complete question:
Suppose a piece of jewelry contains 5.29 × 10²² atoms of silver . How many moles of silver atoms are in the piece of jewelry?
From the question,
A piece of jewelry contains 5.29 × 10²² atoms of silver.
To determine number of moles of silver atoms in the piece of jewelry,
We will use the formula
[tex]Number \ of \ moles = \frac{Number \ of \ atoms }{Avogadro's \ number}[/tex]
From the question
Number of atoms of silver = 5.29 × 10²² atoms
and
Avogadro's number = 6.022 × 10²³ atoms/mole
∴ [tex]Number \ of \ moles \ of \ silver \ atoms= \frac{5.29 \times 10^{22} }{ 6.022 \times 10^{23} }[/tex]
Number of moles of silver atoms = 0.08784 moles
Hence, the number of moles of silver atoms in the piece of jewelry is 0.08784 moles
Learn more here: https://brainly.com/question/10982975
32 g of a metal, M, reacts with 8 g of oxygen to form an oxide. The formula of the oxide is MO. What is the atomic mass of M in g mol-?
Answer: M= 128 g/mol (Te is quite close)
Explanation: number of Oxygen moles is n = 8 g / 32 g/mol = 0,25 mol.
Because formula of oxide is MO, thus amount of metal is also 0,25 mol.
Because n = m/M , Molar mass of the metal M = m/n = 32 g /0.25 mol = 128 g/ mol
1. Chlorofluorocarbons (CFCs) are of interest because of their ability to destroy ozone molecules. A carbon-chlorine bon din the CFC molecule can be broken by sunlight, leaving a highly reactive free radical which then goes on to destroy the surrounding ozone molecules. The energy of a C-Cl bond is 328 kJ/mole. Calculate the wavelength of light needed to break a bond in a single molecule. In which region of the spectrum (infrared, visible, UV) does this wavelength fall
Answer:
See explanation
Explanation:
Energy of the photon (E) = 328 * 10^3/6.02 * 10^23 = 5.45 * 10^-19 J
Recall that E = hc/λ
h = Plank's constant = 6.36 * 10^-34 Js
c = speed of light = 3 * 10^8 m/s
λ = ??
λ = hc/E
λ = 6.36 * 10^-34 * 3 * 10^8/5.45 * 10^-19
λ = 3.5 * 10^-7 m
This falls into the UV region of the spectrum
I don’t understand please help
Balance C3H8 + O2 + CO2 + H2O
Assuming the second plus sign is a typo and was meant to be a reaction arrow, this would be the balanced equation:
C3H8 + 5O2 —> 3CO2 + 4H2O
Using the periodic table, choose the more reactive nonmetal.
Te or O
Answer:
answer is TE
Explanation:
Answer:
Tellurium is more reactive than Oxygen
When a lead acid car battery is recharged by the alternator, it acts essentially as an electrolytic cell in which solid lead(II) sulfate PbSO4 is reduced to lead at the cathode and oxidized to solid lead(II) oxide PbO at the anode. Suppose a current of 96.0A is fed into a car battery for 37.0 seconds. Calculate the mass of lead deposited on the cathode of the battery.
Answer: 3.73 grams
Explanation:
[tex]Q=I\times t[/tex]
where Q= quantity of electricity in coloumbs
I = current in amperes = 96.0 A
t= time in seconds = 37.0 sec
[tex]Q=96.0A\times 37.0s=3552C[/tex]
The reaction at cathode is:
[tex]Pb^{2+}+2e^-\rightarrow Pb[/tex]
[tex]96500\times 2=193000Coloumb[/tex] of electricity deposits 1 mole of
3552 C of electricity deposits =[tex]\frac{1}{193000}\times 3552=0.018moles[/tex] of Pb
[tex]\text {mass of Pb}={\text{moles}\times {\text{Molar mass}}[/tex]
[tex]\text {mass of Pb}={0.018}\times {207.2g/mol}=3.73g[/tex]
Thus mass of lead deposited is 3.73 g
HELP FAST 75 PTS Calculate the amount of heat needed to melt 35.0 g of ice at 0 ºC. must show work
Answer:
It takes 12,000 Joules of energy to melt 35 grams of ice at 0 °C
Explanation:
Good Luck!
__C+_SO2—_CS2 + __CO
Answer:
_c+_so2-_cs2+_co= Toxic
PLEASE HELP!!
A scientist places a pH meter in a sample of concentrated potassium hydroxide (KOH). The scientist slowly adds nitric acid (HNO3) to the KOH and monitors the pH. Describe how the pH and hydronium ion concentration will change in the solution as the acid is added.
Answer:
pH of the solution will decrease & hydronium ion concentration will increase in the solution as the acid is added.
Explanation:
Which of the following would be defined as an exact number?
A. bronze is 12.5% by mass tin
B. 25 ml
C. 50.00 cm
D. 1.000 liters
PLEASE PLEAS HELP I REALLY NEED IT
Answer:
A i took the quiz
Explanation:
what are the twa parts of central nervous system ?
Answer:
The nervous system has two main parts: The central nervous system is made up of the brain and spinal cord.
Explanation:
g You are given a 1.25 gram mixture of calcium nitrate and calcium chloride. You dissolve this mixture in 200.0 mL of water and add an excess of 0.300 M silver nitrate. You collect and dry the white precipitate which forms and find it has a mass of 0.535 grams. Calculate the percent calcium chloride by mass in the original mixture.
Answer:
16.51%
Explanation:
The reaction that takes place is
CaCl₂(aq) + 2AgNO₃(aq) → 2AgCl(s) + Ca(NO₃)₂(aq)Meaning that the white precipitate that formed is AgCl. Now we convert 0.535 g of AgCl into moles, using its molar mass:
0.535 g ÷ 143.43 g/mol = 0.00373 mol AgClThen we convert 0.00373 moles of AgCl into moles of CaCl₂, using the stoichiometric coefficients:
0.00373 mol AgCl * [tex]\frac{1molCaCl_2}{2molAgCl}[/tex] = 0.00186 mol CaCl₂We convert moles of CaCl₂ into grams, using its molar mass:
0.00186 mol CaCl₂ * 110.98 g/mol = 0.206 gFinally we calculate the percent of CaCl₂ by mass in the original mixture:
0.206 g / 1.25 g * 100% = 16.51%The percent calcium chloride by mass in the original mixture is 16.4%
The equation of the reaction between calcium nitrate and silver chloride is:
[tex]\mathbf{CaCl_2 + 2AgNO_3 \to 2 AgCl+Ca(NO_3)_2}[/tex]
Given that;
the weight mass of the white precipitate formed is = 0.535 gramsthe number of moles of the precipitated AgCl is:
= 0.535 g / 143.32 g/mol
= 0.0037 moles
From the above reaction, If 2 moles of AgCl are formed by 1 mole of CaCl2
Then, 0.0037 moles of AgCl will form (0.0037 × 1)/2 moles of CaCl2.
0.0037 moles of AgCl will form 0.00185 moles of CaCl2.
Now, we can say that the number of moles of CaCl2 present in the mixture is = 0.00185 moles
Mass amount of CaCl2 present = 0.00185 moles × 110.98 g/mol
Mass amount of CaCl2 present = 0.205 grams
Finally, the mass percentage [tex]\mathbf{=\dfrac{0.205}{1.25}\times 100\%}[/tex]
= 16.4%
Therefore, we can conclude that the percent calcium chloride by mass in the original mixture is 16.4%
Learn more about mass percentage here:
https://brainly.com/question/23991850?referrer=searchResults
What substance is oxidized in the following reaction? 4HCl + MnO2 → Cl2 + 2H2O + MnCl2
Answer:
Cl⁻ was oxidized.
Explanation:
4HCl + MnO₂ → Cl₂ + 2H₂O + MnCl₂Oxidation can be defined as the process in which the oxidation number of a substance increases.
On the left side of the equation, Cl has a charge of -1 (in HCl); while on the right side of the equation Cl has a charge of 0 in Cl₂.
Thus, Cl⁻ was oxidized.
Which superpower would you have for the rest of your life?
The ability to fly
Teleportation
Super speed
Super strength
Invisibility
Time travel
Or be normal and have nothing special
time travel is the best option
Ca3(PO4)2 + 3H2SO4 3CaSO4 + 2H3PO4.
What mass of concentrated H2SO4 (98% by mass) must be used to react completely
with 100.00 g of calcium phosphate?
100g
H2SO4 = 3x98x100/310 = 94.84g
used mass of h2so4x100/all mass of H2so4 = 98%
yx100/98=94.84x100/98 = 96.81.
Check the attached photo for clear answer.
What is the use of calcium phosphate?It may be used to treat conditions caused by low calcium levels such as bone loss (osteoporosis), weak bones (osteomalacia/rickets), decreased activity of the parathyroid gland (hypoparathyroidism), and certain muscle diseases (latent tetany).
Is calcium phosphate good for health?About Calcium Phosphate Supplements
It aids in healthy bone development and is crucial from infancy to adulthood. But, calcium does more than build strong bones. It's also very important for healthy digestion. Calcium aids in bile acid metabolism, excretion of fatty acids, and healthy gut microbiota.
Learn more about calcium phosphate at
https://brainly.com/question/10835189
#SPJ2
which element is shown in the picture here?
Describe how chemical reactions are affected by reaction conditions
of monction?
Answer:
hope his helps
Explanation:
Mention the factors affecting the rate of reaction
There are four main factors that can affect the reaction rate of a chemical reaction:
Reactant concentration. Increasing the concentration of one or more reactants will often increase the rate of reaction. ...
Physical state of the reactants and surface area. ...
Temperature. ...
Presence of a catalyst.
Identify the type of reaction.
Al + MgSO4 = Al2(SO4)3 + Mg
Answer: its combustion
Explanation:
A 20.0 L container at 303 K holds a mixture of two gases with a total pressure of 5.00 atm. If there are 2.00 mol of Gas A in the mixture, how many moles of Gas B are present?
The number of moles of Gas B in the gas mixture is equal to 2.00 mol.
What is the ideal gas equation?The ideal gas equation can be explained as an equation that describes the state of an ideal gas. This equation gives the product of the volume and pressure of ideal gas equal to the multiplication of the universal gas constant, absolute temperature, and moles of gas.
The mathematical form of the ideal gas equation mentioned below:
PV = nRT
Where P is the pressure, V is the volume, n is the moles, and R is the gas constant.
Given, the volume of the gas mixture, V = 500 ml = 0.5 L
The temperature of the gas mixture, T = 303 K
The pressure of the gas mixture = 5 atm
The value of gas constant, R =0.082 atmL/K mol
Substituting the values R, V, P, and T in the ideal gas law, we get:
The number of moles of the gas mixture, n = PV/RT
n = 5 ×20/(0.082 × 303)
n = 4.00 mol
The total number of moles of gas mixture = 4.00 mol
The moles of Gas A = 2.00 mol
The moles of Gas B = 4 - 2 = 2.00 mol
Learn more about ideal gas equation, here:
brainly.com/question/3637553
#SPJ2
You heat water and olive oil in two separate pans for a delicious new pasta recipe. The pans are the same temperature, but only the water is boiling! Why?
A
Olive oil has weaker intermolecular forces than water. This makes the intermolecular forces in oil easier to break, and keeps the molecules stuck together in a liquid state.
B
Water has weaker intermolecular forces than olive oil. This makes the intermolecular forces easier to break, allowing the individual water molecules to separate and change to a gas.
C
Water is losing electrons more quickly than olive oil is. The electrons float to the surface of the water, and their movement allows the phase change to happen.
Answer:
I think A is the correct answer
Answer: the answer is B 100%
pleaaaaase helppppppppppppp ASAP
Answer:
Explanation:
a) The forward reaction is exothermic, hence when temperature is increased the equilibrium shift towards the reactants side to get rid of the excess energy. This will mean that more reactants are produced decreasing yield
b) There are a fewer number of moles of gas on the right side compared to the left side (Just count the coefficients before each compound) so a higher pressure will mean that the equilibrium will shift towards the products side in order to decrease the pressure. This will mean that more products are formed increasing yield
c) When something is powdered it's surface area to volume ratio increases. A higher surface area means that the particles around it have more area to work on so the frequency of collisions will increase increasing the rate of reaction. This is why iron is powdered.
If you just want points just say so this can lead me to failing 10th if I don’t pass this quiz so if you don’t know just say so I understand you want points I just don’t wanna fail Ocean acidification is a consequence that occurs when the equilibrium between CO2
CO
2
concentrations in the ocean and atmosphere starts shifting. What is the pH of pure water?
Question 8 options:
13, basic
7, neutral
4, acidic
Answer:
13,basic would be your answer!
Explanation:
How can the speed of solvent molecules be slowed down?
A.by increasing the temperature
B. by increasing the surface area of the solute
C. by increasing the pressure
D. by decreasing the temperature
E. by decreasing the surface area of the solute
Answer:
D
Explanation:
When molecules absorb energy they speed up and have a more forceful collision with solute molecules.
How much more acidic/more H+ concentration is a pH of 6 than pH of 8
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Answer: 1000x
Explanation:
I hope this helped!
<!> Brainliest is appreciated! <!>
- Zack Slocum
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
How many moles is 2.04x1023 molecules of NH3?
Answer:
We will Multiply the number of moles with Avagadro's number
So it will be (2.04×1023)×6.022×10^23
or 2.04×1023 NANA means Avagadro's number
What is the percent composition of hydrogen in glucose
Answer:
67%Explanation:
Thus the % composition of glucose by mass is carbon 40.0 % oxygen 53.3 % hydrogen 6.7 % in this way, the % composition by mass of any compound can be calculated provided that is formed is known.Best answer gets brainliest
Answer:
C) Mercury based thermometer
Explanation:
Answer:
Mercury based thermometer
Explanation:
When you touch a lightbulb it is warm. Hairdryer produces heat to dry your hair. Stove heats up to warm food and liquids up.
Give an example of an electrolyte
Answer: sodium chloride water solution
Explanation: Eelctrolyte contains cations and anions which can
Transfer charge
Answer:
some energy drinks like powerade or Gatorade, and some juice drinks to.
