Complete question:
A college dormitory room measures 14 ft wide by 13 ft long by 6 ft high. Weight density of air is 0.07 lbs/ft3. What is the weight of air in it under normal conditions?
Answer:
the weight of the air is 76.44 lbs
Explanation:
Given;
dimension of the dormitory, = 14 ft by 13 ft by 6 ft
density of the air, = 0.07 lbs/ft³
The volume of the air in the dormitory room = 14 ft x 13 ft x 6 ft
= 1092 ft³
The weight of the air = density x volume
= 0.07 lbs/ft³ x 1092 ft³
= 76.44 lbs
Therefore, the weight of the air is 76.44 lbs
A car and a large are moving with the same velocity. Which of the two is more difficult to
slow down? Why?
(Serious Answers Please)
Whichever object has more mass will need more energy to slow it down.
We don't know the mass of the car or the mass of the large.
None of this has anything to do with "difficult". We don't know what's difficult for you, and we don't know the SI unit of "difficult".
True or false please help I’ll give brainliest
Answer:
1 is false 2 is true 3 is false
WILL MARK BRAINLIEST
Answer:
152,155 J
Explanation:
115,333 + 36,822 = 152,155J
which type of material is the best sound absorber?
a. glass
b. wood
c. concrete
d. carpet
Explanation:
Glass is the best sound absorber material.
En una sala de juntas hay mesas, sillas y otras personas. ¿Cuál de ellas tienen temperaturas
a) menores, b) mayores y d) iguales que la del aire?
Answer:
table and chair
Explanation:
In a meeting room there are tables, chairs, and other people. Which of them have temperatures
a) smaller, b) bigger and d) equal to that of air?
the temperature of tables and chairs is same as air.
The symbol for the hydroxide ion is
Он*
Оно
ОН(ОН)
ООН
NEXT QUESTION
ASK FOR HELP
a cell of EMF 1.5 volt is connected in series with a resistor of Resistance 3 ohms a high resistance voltmeter connected across the cell registers 0.9 volt calculate the internal resistance of the cell
Answer:
0.6 resistance
The length of second hand of clock is 14cm, an ant sits on the top of second hand. find the following
i) speed of ant
ii) distance covered by ant in 150 seconds
iii) displacement in 150 seconds
Answer:
i) v = 1.47 cm/s
ii) distance = 219.8 cm
iii) displacement = 28cm
Explanation:
Remember that:
The motion of the tip of the second hand is a circular motion.
For something that rotates with an angular frequency ω, and a radius R, the velocity is given by:
v = ω*R.
i) We know that the second hand of a clock does a complete rotation each 60 seconds.
Then the period is:
T = 60s
And the frequency is the inverse of the period, so:
f = 1/T
f = (1/60s)
And the angular frequency is 2*pi times the normal frequency, thus:
ω = 2*pi*f
ω = 2*pi*(1/60s) = (2*pi/60s)
And the radius will be 14 cm, the velocity of the ant is:
v = (2*pi/60s)*14cm
if we replace pi by 3.14 we get:
v = (2*3.14/60s)*14cm = 1.47 cm/s
ii) The distance covered by the ant in 150 seconds:
Remember that the period of the clock is T = 60s
so in 150 seconds we have:
150s/60s = 2.5 revolutions.
Then the total distance covered is 2.5 times the perimeter of a circle of radius R = 14cm, this is:
distance = (2.5)*2*pi*14cm
= (2.5)*2*3.14*14cm = 219.8 cm
iii) We want to know the displacement, this is, the difference between the final position and the initial position.
In 150 seconds, the ant does 2.5 revolutions.
So the ant will end in the opposite side of the circle where she started (if the ant started when the second hand was at the "3", then the final position is when the second hand is at the "9").
So the displacement will be equal to twice the radius, or the diameter of the circle.
if the radius is 14cm, the diameter is:
2*14cm = 28cm
the displacement is 28cm
What is shunt resistance? How does it help in measuring current?
Answer:
it helps me
Explanation:
:))) ...
....
A exerted by an object on another is a force
hope this helps
Answer:
If a person is pushing a desk across the room, then there is an applied force acting upon the object. The applied force is the force exerted on the desk by the person.
What is the position and kind of image produced by the lens below?
Complete the ray diagram to support your answer.
when a metal ball is heated through 30°c,it volume becomes 1.0018cm^3 if the linear expansivity of the material of the ball is 2.0×10^-5k^-1, calculate its original volume
Two wires made of the same material are connected in parallel
across the mains. The length and radius of one wire is two
times that of the other wire. If heat produced in the shorter wire
is 100 J, then the heat produced in the longer wire is:-
O A. 100 J
B. 180 J
O C. 2003
O D. 420 J
Answer:
The heat produced in the longer wire is 200 J.
Explanation:
When the two wires are connected in parallel then the voltage across both the wires is same.
Let the length of the second wire is L and the radius of the second wire is R.
The length of the first ire is 2L and the radius of the first wire is 2R.
Heat produced in the second wire is 100 J.
Let the heat produced in the first wire is H'.
The resistance of the wire is proportional to length of the wire and inversely proportional to the area of the wire.
[tex]\frac{R_2}{R_1}=\frac{L\times \pi\times 4R^2}{2L\times \pi\times R^2}\\\\\frac{R_2}{R_1}=2[/tex]
The heat produced is given by
[tex]H=\frac{V^2}{R}\\\\\frac{H_1}{H_2}=\frac{R_2}{R_1}\\\\\frac{H_1}{100}=2\\\\H_1=200 J[/tex]
A current of 17 A flows through a resistor of 10 2. What is the voltage
across the resistor
Is it safe to travel to the moon in a total lunar eclipse ? If you answer I will mark you as BRAINLIEST
Answer:
Yes. The area around you would be a bit red I think.
The initial momentum of a system is measured at 300 kg•m/s. Afterwards, the
momentum is measured to be 280 kg•m/s. What is the impulse of the system?
In an experiment, 120 g of ice at 0 °C is to be melted. The specific latent heat of
ice is 340 J/g. Assume that all the energy from the heater will be used to melt
the ice.
Q1) Calculate the expected time for which the 60 W heater is switched on.
Answer:
[tex]680\; \rm s[/tex].
Explanation:
Start by finding the total amount of energy required for melting that much ice.
[tex]\begin{aligned}&\text{Energy required for melting ice sample} \\ &= \text{Mass of Ice} \times \text{Specific Latent Heat of Ice} \\ &= 120\; \rm g \times 340\; \rm J \cdot g^{-1} = 4.08 \times 10^{4}\; \rm J \end{aligned}[/tex].
Hence, the heater would need to supply (at least) [tex]4.08 \times 10^{4}\; \rm J[/tex] of energy.
The power of the heater is [tex]60\; \rm W[/tex], which is equivalent to [tex]60\; \rm J \cdot s^{-1}[/tex], In other words, the heater is rated to supply [tex]60\; \rm J[/tex] of energy every second.
Amount of time it takes for the heater to supply [tex]4.08 \times 10^{4}\; \rm J[/tex] at [tex]60\; \rm J \cdot s^{-1}[/tex]:
[tex]\begin{aligned}\frac{4.08 \times 10^{4}\; \rm J}{60\; \rm J \cdot s^{-1}} = 680\; \rm s\end{aligned}[/tex].
Hence, it would take [tex]680\; \rm s[/tex] for the heater to melt the ice if the heater is insulated, and all the energy from the heater went to the ice.
A 500-kg crate sits on a 10-degree ramp. If friction between the ramp and the crate is 800 N, what is the acceleration of the crate?
By Newton's second law, the net force acting on the crate parallel to the surface is
∑ F = mg sin(10°) - 800 N = ma
where m = 500 kg is the mass of the crate and a is the acceleration.
Solve for a :
a = ((500 kg) (9.80 m/s^2) sin(10°) - 800 N) / (500 kg)
a ≈ 0.102 m/s^2
The switch is released and the door locks. Explain in detail how this happens.
Answer:
The iron bolt is attracted to the electromagnet. The force of attraction between the electromagnet's core and the iron bolt is greater than the force of the spring, so the iron bolt is pulled out of its housing in the door
Explanation:
A 1500 kg truck travelling north at 60 km/hr collides with a 1200 kg car moving east at 15km/hr. If the two cars remain locked together after impact, with what velocity do they move immediately after the collision.
Answer:
33.33j+6.67i km/hr
Explanation:
From the law of conservation of momentum,
Applying,
mu+m'u' = V(m+m')............... Equation 1
Where m = mass of the truck, m' = mass of the car, u = initial velocity of the truck, u' = initial velocity of the car, V = Final velocity.
Note: let j represent the north, and i represent the east
From the question,
Given: m = 1500 kg, u = 60j, m' = 1200 kg, u' = 15i
Substitute these values into equation 1
1500*60j+1200*15i = V(1500+1200)
90000j+18000i = 2700V
V = (90000j+18000i)/2700
V = 33.33j+6.67i km/hr
What is average speed???
Answer:
total distance dibide by total time
Describe how the moment acts in each one of them.
1. Applying a force on the pedal of a bicycle
Answer:
Moment is an expression involving the product of a distance and physical quantityA moment is due to a force not having an equal and opposite force directly along it's line of action. ... It is defined as the product of the force (F) and the moment arm (d). The moment arm or lever arm is the perpendicular distance between the line of action of the force and the center of moments.Moments act about a point in a clockwise or anticlockwise direction.
Answer: A ( how to pedal and balance )
Explanation:
What is the difference between circular and rotatory motion?
Answer:
In a circular motion, the object just moves in a circle. In rotational motion, the object rotates about an axis. ... For example, Earth rotating on its own axis.
Answer:
Its different
Explanation:
it's different because
Mr. Tolman believes that our universe is expanding, but with all of the gravitational force from the celestial bodies of space, the universe will begin to contract. He believes in the _____.
A) oscillating universe theory
B) inflation theory
C) steady state theory
D) big bang theory
HELPPPPPPPP!!!!! PLZZZ
Answer:
1- 31.25
2-?
3-?
Explanation:
B
oc
OD
A metal has a specific heat capacity of 360J/(kg°C).
An object made of this metal has a mass of 2.0kg.
What is the thermal capacity (heat capacity) of the object?
Answer:
Thermal capacity of the object = 720 j/°C
Explanation:
Given:
Specific heat capacity of metal = 360J/(kg°C)
Mass of given object = 2 kg
Find:
Thermal capacity of the object
Computation:
Thermal capacity = Specific heat x Mass
Thermal capacity of the object = Specific heat capacity of metal x Mass of given object
Thermal capacity of the object = 360 x 2
Thermal capacity of the object = 720 j/°C
VI. A student attaches four drawing pins to a copper rod using candle wax as shown in the diagram
The rod is then heated continuously at one end and the pins fall off in the order 4, 3, 2, 1
Explanation:
[tex]C.) \: Conduction \: \\ \\ = > it \: is \: a \: process \: of \: transferring \: \\ \\ of \: heat \: from \: one \: object \: to \: another \\ \\ when \: they \: are \: in \: contact \: [/tex]
By the conduction process the heat reaches the pin.Option C is correct.
What is heat transfer?The term "heat transfer" refers to the movement of heat. The flow of heat across a system's boundary is due to a temperature differential between the system and its surroundings.
Conduction is the type of heat transfer occurs mainly in solid or by contact.In the given condition the rod is then heated continuously at one end and the pins fall off in the order 4, 3, 2, 1.
By the conduction process the heat reaches the pin.
Hence option C is correct.
To learn more about the heat transfer refer to the link;
https://brainly.com/question/13433948
#SPJ2
When is the kinetic energy of the ball zero and when is it at its highest? When is its potential energy at its lowest and at its highest? What happens to the kinetic energy and potential energy between point A and point B? (3 points)
Answer:
if there is only one planet in the universe and the ball is there it will have 0 kinetic energy if the ball is in the very center of that planet only if the planet itself is absolutely motionless. its at its highest if the planet is moving away from the ball at a slightly faster speed forever. Between point A and B both potential energy and kinetic energy are at perfect 0.
Explanation:
never will have a measurable kinetic or potential energy status unless every single object is included in the calculation.
What are the poles of a bar magnet.is it North West South or east.
Answer:
One end of any bar magnet will always want to point north if it is freely suspended. This is called the north-seeking pole of the magnet, or simply the north pole. The opposite end is called the south pole.
Explanation:
Answer:
North Pole and South Poles
Explanation:
There is no east or west in a magnetic field of a magnet. The magnetic field lines comes from North pole to south pole.
Jenny is doing her homework when Jenny writes, the pencil exerts a force of 5N on the paper. The area of the pencil in contact with the paper is 0.5mm2 calculate the pressure of the pencil in the paper give the unit
Answer:
here is your answer
mark me as brainlist
