Answer:
40 kilograms of fuel are required to meet their energy needs for the month of April.
Explanation:
The month of April has 30 days and the full energy needed by the family is determine by the following combustion formula, derived from dimension analysis:
[tex]n\cdot Q = m\cdot L_{c}[/tex] (1)
Where:
[tex]m[/tex] - Mass of the fuel, measured in kilograms.
[tex]L_{c}[/tex] - Calorific value of the fuel, measured in kilojoules per kilogram.
[tex]Q[/tex] - Daily fuel energy, measured in kilojoules.
[tex]n[/tex] - Number of days of the month, dimensionless.
If we know that [tex]Q = 20000\,kJ[/tex], [tex]n = 30[/tex] and [tex]L_{c} = 15000\,\frac{kJ}{kg}[/tex], then the amount of fuel required to meet their energy needs for the month of April is:
[tex]m = \frac{n\cdot Q}{L_{c}}[/tex]
[tex]m = \frac{(30)\cdot (20000\,kJ)}{15000\,\frac{kJ}{kg} }[/tex]
[tex]m = 40\,kg[/tex]
40 kilograms of fuel are required to meet their energy needs for the month of April.
The combustion of propane (C3H8) creates water and CO2. Looking at the
reaction below, which of the following would be the mole ratio between propane
and carbon dioxide? *
C3H8 +502->4H2O + 3C02
A)3 mole CO2 / 5 mole C3H8
B)3 mole C3H8/4 mole CO2
C)3 mole CO2 / 1 mole C3H8
D)3 mole C3H8 / 1 mole CO2
Answer:
C)3 mole CO2 / 1 mole C3H8
Explanation:
V2S3 chemical compounds?
Answer:
Hence the name of the compound is vanadium (III) sulfide
The chemical symbol for the vanadium(III) sulfide compound is [tex]V_2S_3[/tex]. In this chemical, vanadium (V) is found in +3 oxidation state and sulfur (S) is found in the form of sulphide ions.
The compound contains two vanadium ions, as indicated by the numerical prefix "di-" before the element symbol V. An inorganic compound having a crystal structure that produces a solid is called vanadium(III) sulfide.
It is composed of sulfide anions and vanadium cations arranged in a certain way. Vanadium(III) sulfide has many uses in various industries. It can be used as a catalyst in chemical reactions, as part of some types of batteries, and as a raw material for batteries to produce ceramics and materials with specific electrical and magnetic properties.
Learn more about anions and cations, here:
https://brainly.com/question/7337039
#SPJ6
Water in the atmosphere is a gas. When the air cools, water may condense into clouds. Then it may become a liquid or a solid and fall back to the surface of the Earth.
Water that falls from clouds is called
A.
precipitation.
B.
evaporation.
C.
groundwater.
D.
the water cycle.
Answer:
A precipitation is answer
Which chemical equations show a precipitation reaction?
Select all the correct answers.
2NaNO3(aq) + NiCl2(aq) → 2NaCl(aq) + Ni(NO3)2(aq)
MgSO4(aq) + CaCl2(aq) → MgCl2(aq) + CaSO4(s)
AlBr3(aq) + 3LiI(aq) → AlI3(aq) + 3LiBr(aq)
FeCl2(aq) + Na2CO3(aq) → FeCO3(s) + 2NaCl(aq)
2AgNO3(aq) + Na2S(aq) → Ag2S(s) + 2NaNO3(aq)
The equations that show a precipitation reaction would be [tex]MgSO_4(aq) + CaCl_2(aq) --- > MgCl_2(aq) + CaSO_4(s)[/tex], [tex]FeCl_2(aq) + Na_2CO_3(aq) --- > FeCO_3(s) + 2NaCl(aq)[/tex], and [tex]2AgNO_3(aq) + Na_2S(aq) --- > Ag_2S(s) + 2NaNO_3(aq)[/tex]
What is a precipitation reaction?It is a reaction in which two soluble salts react in aqueous solutions to form one soluble and one insoluble salt.
Thus, all the equations with an insoluble salt as one of the products will qualify as precipitation reactions. The insoluble is designated as (s).
Hence, the following are precipitation reactions:
[tex]MgSO_4(aq) + CaCl_2(aq) --- > MgCl_2(aq) + CaSO_4(s)[/tex][tex]2AgNO_3(aq) + Na_2S(aq) --- > Ag_2S(s) + 2NaNO_3(aq)[/tex][tex]FeCl_2(aq) + Na_2CO_3(aq) --- > FeCO_3(s) + 2NaCl(aq)[/tex]More on precipitation reactions can be found here: https://brainly.com/question/24158764
#SPJ2
Which of the following conditions does not affect equilibrium?
A. Particle Size
B. None of these
C. Concentration
D. Pressure
Answer:
B. None of these
Explanation:
A solution with a pH value between 1 and 6
Answer:
One possible answer could be lemon juice
Explanation:
We had to do a water test, and I was looking up what pH levels were. Then I learned about it in school, so I know a thing or two about it :)
Possible other answers include stomach acid and cola.
Hope this helps!!
How would kinetic energy of the dominoes be affected if the first domino did not hit the second one?(((20 points)))
Answer:
Not affected.
Explanation:
Kinetic energy of the dominoes not affected if the first domino did not hit the second one because no kinetic energy is lost due to no collision. If the first domino hit the second one, its kinetic energy decreases and changes in other form of energy such as heat and sound energy etc. But when there is no collision occur, then there is no change in the kinetic energy of dominoes.
4. On the island of Hawaii, Keanu notices that the sand on the beach is black, the same color as the
rock formations on the island. Keanu realizes the sand used to be part of the rock formations. How
did material from the rock formations turn into sand?
Answer:
The ricks were degraded over time by wind and water and were crushed down into tiny, smaller rocks, which is sand.
Explanation:
This is my first answer sorry im not that smart
2
A sample of water has a volume of two liters and is shaped like a cylinder in one container. In a much larger container, the water
still has a volume of two liters, but it is shaped like a rectangle
What state of matter is the water in?
OA. Solid
OB. magnetic
OC. plasma
OD. liquid
Reset
Submit
Answer:
D. liquid
Explanation:
Matter, which is any substance that has weight and occupies space, can exists in three states namely: solid, liquid and gaseous. In this question, water is being described as matter.
According to this question, a sample of water of volume 2litres is shaped like a cylinder in one container and shaped like a rectangle in another larger container. Based on this observation, the water sample is in a LIQUID STATE because a liquid has no indefinite shape but takes the shape of its container.
Hence, this water sample, takes the shape of its cylindrical container in the first scenario and shape of its rectangular container in the second scenario.
What does a sound wave’s frequency tell you? HELP IF YOU WANT BRAINLEIST AND TO HAVE YOUR COMMENT LIKED!!
A. the loudness or softness of the sound from an object
B. the type of medium in which the sound is traveling
C. the number of vibrations per second an object is making
D. the amplitude of the sound wave
Answer:
I am pretty sure it is C.
Explanation:
Because the wave frequency's tell us the number of waves there are on that diagram.
Answer:
C. the number of vibrations per second an object is making
Explanation:
Hope this helps. Sorry if it doesn't. T^T
Which of these factors are biotic? (SELECT ALL THAT APPLY.)
animals
light
minerals
water
plants
Answer:
plants
Explanation:
because it produces ( i am a third grade student and don't know if it is right or not)
When salt water is heated leaving behind solid salt, this is separating a mixture by what method ?
which is a characteristics of all ions
Answer:
All ions must a overall charge
Explanation:
Answer:
i belive its B
Explanation:
What is the number of electrons in an atom that has 26 protons and 30 neutrons?
Answer:
26
Explanation:
The number of electrons and protons are equal.
How does knowing the reactants and products
help you classify a chemical reaction? Write a
short paragraph explaining.
Answer:
Here's the Sample Response: The reactants and products determine the type of chemical reaction. If there are more products than reactants, then it is a decomposition reaction. If there are more reactants than products, it is a synthesis reaction. If oxygen is a part of the reactant, it is a combustion reaction. If one ion replaces another, it is a single replacement reaction. If there are two compounds in a reactant where cations switch, it is a double replacement reaction.
Explanation:
can someone plz help me with this..
Answer:
Sweets are sold loose, or pre-packed in 120g bags.
The 120 g bags are £1.49 each.
The loose sweets are £0.89 for 100g.
By calculating the price per gram, determine which is better value. Show your working.
A 600. mL beaker has an inner diameter of 77.0 mm. What is the vertical distance between the 100. mL marks on the side of the beaker
Answer:
[tex]h=12.9cm[/tex]
Explanation:
Hello!
In this case, since we can consider the beaker until the 100-mL mark as a cylinder, we can use the following equation to relate its diameter, vertical distance or height and volume:
[tex]V=\pi h\frac{d^2}{4}[/tex]
Thus, since we know the diameter, volume (which is equivalent to 600 cm³) and π, we can plug in to obtain:
[tex]600cm^3=\pi *h*\frac{(77.0mm)^2}{4}[/tex]
It means it is necessary to take the mm to cm and solve for h:
[tex]h=\frac{600cm^3}{\pi*\frac{(7.70cm)^2}{4}} \\\\h=12.9cm[/tex]
Best regards!
The distance between each 100 mL mark is 2.15 cm.
The volume of a cylinder is obtained using the formula;
V = πr^2h
Now, we have the following information;
Volume of the cylinder = 600. mL or 600 cm^3
Diameter of the cylinder = 77 mm or 7.7 cm
Radius of the cylinder = 7.7/2 = 3.85 cm
Height of the cylinder = h
Hence;
600 = 3.142 × ( 3.85 )^2 × h
h = 600/3.142 × ( 3.85 )^2
h = 12.88 cm
There are six 100 mL marks on the beaker, the distance between each 100 mL mark = 12.88 cm/6 = 2.15 cm
Learn more about volume: https://brainly.com/question/12748872
grams can be converted to moles and vice versa which conversion factors is/are used for this
Answer:
Converting Grams to Moles of an Element and Vice Versa.
We can convert back and forth between grams of an element and moles.
The conversion factor for this is the molar mass of the substance. The molar mass is the ratio giving the number of grams for each one mole of the substance
molar mass is the factor
Grams can be converted to moles and vice versa so the conversion factor which is used for this is molar mass.
How do we convert mass into moles?Mass of any substance will be converted into moles by using the below equation:
n = W/M, where
n = moles
W = given mass
M = molar mass
By using the above formula we can convert the mass of any object to moles and moles to mass.
Hence conversion factor which is used for this is molar mass(M).
To know more about mass & moles, visit the below link:
https://brainly.com/question/24639749
#SPJ2
How many atoms are in 1 mole of water, H2O?
Answer:
1.807×10and at the top of ten put -24
Which method would be best for separating the components of a mixture that is made from two different liquids?
O distillation
evaporation
filtration
sorting
Answer:
I think you should use distillation cauze it helps to separate two mixtures
Answer:
A.) distillation
Explanation:
edge 2021
PLEASE HELP I WILL GIVE YOU BRAINLIEST
(the linked photo)!!! thank you
Answer:
1. nitrous oxide
2. copper sulfide
3. cl2o7
4. MgBr2
Explanation:
hope it helps
A deer is running across a meadow at a speed of 15 m/s. Katie is riding in a car that is traveling at 25 m/s in the opposite direction as
the deer. To Katie, the deer appears to be moving at a speed of 35 m/s.
Joan is standing still beside the meadow. To Joan, the deer appears to be moving at a speed of 15 ms.
Why do Katie and Joan believe the deer is traveling at different speeds?
A. Joan is not able to see clearly.
B. They are not the same height and weight.
C. They have different frames of reference.
D.Katie's car is going too fast.
Answer:
D
Explanation:
Answer:
C they have different frames of reference
Explanation:
CAN SOMEBODY HELP ME WITH THIS QUESTION PLEASE !! ?
hope it helps you......
Balance the chemical equation below using the smallest possible whole number stoichiometric coefficients. FE2O3(s) Fe(s) O2(g)
Answer:
2Fe₂O₃(s) → 4Fe(s) + 3O₂(g)
Explanation:
The unbalanced reaction is:
Fe₂O₃(s) → Fe(s) + O₂(g)To balance the oxygen atoms, we put a 2 before Fe₂O₃ and a 3 before O₂(g) - so as to make the total of O atoms in both sides 6 -:
2Fe₂O₃(s) → Fe(s) + 3O₂(g)There are four Fe atoms on the left side and only one on the right side, so we put a 4 before Fe(s):
2Fe₂O₃(s) → 4Fe(s) + 3O₂(g)Now the equation is balanced: there is an equal number of both Fe and O atoms in both sides of the equation.
What does a control group show in an experimental investigation?
Answer:
the effects that the scientists are causing by manipulating varuables
what happen when we put a waterproof paper in hot water and what happens in cold water?
Answer:
When you heat up water, the water molecules start moving around faster and faster. ... So hot water is less dense than cold water. When you put the two together with the hot water on the bottom, the hot water rises to the top, mixing with the cold water along the way and creating purple water.
Explanation:
have a great day :)
What would you use to determine whether an acid or alkali has been added to a solution?
A. Reactant
B. Indicator
C. Adjustor
D. Identifier
Answer:
B. Indicator
Explanation:
An indicator is used to determine whether an acid or alkali has been added to a solution.
An acid or alkali changes the hydrogen ion concentration in solution. This is indicated by the pH of the solution after which the acid or alkali has been added.
To see this change, indicators are used. An indicator employs color changes to show a change in chemical properties which pertains to the pH. There are several indicators used which are litmus paper, phenolphthalein, methyl orangeFill in the process that causes each transition. Your choices are evaporation, condensation, precipitation, melting, and freezing
A. Ocean-> Atmosphere __________
B. Atmosphere-> clouds
__________
C. Cloud-> snow
__________
D. Glacier (river of ice) -> River ________
E. Cloud-> soi
__________
Answer:
1. Oceans -> Atmosphere = Evaporation
2. Atmosphere -> Clouds = Condensation
3. Cloud -> Snow = Freezing
4. Glacier -> River = Melting
5. Cloud -> Soil = Precipitation
Explanation
1. When liquid water is heated by the sun it evaporates into the atmosphere
2. When the saturated air cools down in the atmosphere, Water vapor condenses into tiny droplets to form a cloud
3. When the Temp is below freezing, water droplets crystalize into snow flakes.
4. Glaciers melt into the River
5. The cloud precips into soil
the other person got it really wrong.
A, B, C, D, and E would be evaporation, condensation, freezing, melting, and precipitation respectively
Phase TransitionWater from the ocean gets into the atmosphere by evaporation.The water vapors in the atmosphere condense together by various processes to form different clouds.Clouds cool to a freezing temperature and become snows.Glaciers melt and the resulting water turns into nearby rivers.Cloud causes precipitation and the water goes into soils.More on cloud formation can be found here: https://brainly.com/question/1242352?referrer=searchResults
What is a hypothesis?
Answer: a supposition or proposed explanation made on the basis of limited evidence as a starting point for further investigation.
Explanation: definition
Why can you see solids and liquids, but not most gases?
Why can gases and liquids be paired but not solids?
The atoms and molecules in gases are much more spread out than in solids or liquids. They vibrate and move freely at high speeds. A gas will fill any container, but if the container is not sealed, the gas will escape. Gas can be compressed much more easily than a liquid or solid.
