A flat coil of wire is placed in a uniform magnetic field that is in the y-direction.
The magnetic flux through the coil is maximum if the coil is:_________.
(a) in the XY plane
(b) in either the XY or the YZ plane
(c) in the XZ plane
(d) in any orientation, because it is constant.

Answer:

Answer to the following question is as follows;

Explanation:

The puck's real altitude is lower than ones projection. That's because the mechanism may not be completely frictionless. Electricity is nevertheless wasted owing to particle interactions such as friction, which might explain why the present the results is lower than predicted.

Phytochemicals are compounds that are produced by plants ("phyto" means "plant"). They are found in fruits, vegetables, grains, beans, and other plants. Some of these phytochemicals are believed to protect cells from damage that could lead to cancer.

Answer:

K = 0 J

Explanation:

Given that,

The mass of the particle, m = 1.2 mg

The speed of the particle, [tex]v=1.62\times 10\ cm/h[/tex]

We need to find the kinetic energy of the particle at time t = 0 s.

At t = 0 s, the particle is at rest, v = 0

So,

[tex]K=\dfrac{1}{2}mv^2[/tex]

If v = 0,

[tex]K=0\ J[/tex]

So, the kinetic energy of the particle at time t = 0 s is 0 J.

Answer:

 E = 2,964 10⁻¹⁹ J

Explanation:

The energy of the photons is given by the Planck relation

          E = h f

the speed of light is related to wavelength and frequency

          c = λ f

we substitute

          E = h c /λ

let's reduce the magnitude to the SI system

          λ = 671 nm = 671 10⁻⁹ m

let's calculate

          E = 6.63 10⁻³⁴ 3 10⁸ /671 10⁻⁹

          E = 2,964 10⁻¹⁹ J

Answer:

I am pretty sure it is C

Explanation:

It can be found all over the universe

Answer:

Option (A) is correct.

Explanation:

A horizontal rope has a length of 5 m and a mass of 0.00145 kg. If a pulse occurs on this string, generating a wavelength of 0.6 m and a frequency of 120 Hz. The tension to which the string is subjected is

mass of string, m = 0.00145 kg

Frequency, f = 120 Hz

wavelength = 0.6 m

Speed = frequency x wavelength

speed = 120 x 0.6 = 72 m/s

Let the tension is T.

Use the formula

[tex]v =\sqrt\frac{T L}{m}\\\\72 = \sqrt\frac{T\times 5}{0.00145}\\\\T = 1.5 N[/tex]

Option (A) is correct.

Yes. Because it opposes the law of friction

I hope this helps.

Explanation:

Please mark me brainliest

Answer:

0.3 N

Explanation:

Electromagnetic force is F= Kq1q2/r^2, where r is the distance between charges. If r is doubled then the force will be 1/4F which is 0.3 N.

The magnitude of the force exerted on Q by q when the distance between them is doubled is 0.3 N

F = Kq₁q₂ / r²

Where

From Coulomb's law,

F = Kq₁q₂ / r²

Cross multiply

Fr² = Kq₁q₂

Kq₁q₂ = constant

F₁r₁² = F₂r₂²

With the above formula, we can obtain the final force as follow:

F₁r₁² = F₂r₂²

1.2 × r² = F₂ × (2r)²

1.2r² = F₂ × 4r²

Divide both side by 4r²

F₂ = 1.2r² / 4r²

F₂ = 0.3 N

Learn more about Coulomb's law:

https://brainly.com/question/506926

Answer:

Explanation:

Speed= distance/time

Or time = distance/speed

According to your question

Speed=15m/s

and. Distance=1.2km. ,we must change kilometer in meter because given speed is in m/s

D= 1.2km = 1.2×1000m =1200meter

Time = distance/ speed

1200/15 =80second

Or. 1min and 20 sec will be your answer.

Answer:

Elevator That Is Moving Downwards At A Constant Speed Of 4.9 M/S. What Is The Magnitude Of The Net Force Acing On The Student?

This problem has been solved!

This problem has been solved!See the answer

This problem has been solved!See the answerA student weighs 1200N. They are standing in an elevator that is moving downwards at a constant speed of 4.9 m/s. What is the magnitude of the net force acing on the student?

Explanation:

use this R= m(g-a), where R = reaction = weight, m= mass, a= acceleration and g= acceleration due to gravity

Answer:

The average force exerted on the car is 590.12 N.

Explanation:

Given that,

The power generated, P = 22 hp = 16405.4 W

Speed of the car, v = 100 km/h = 27.8 m/s

We need to find the average force exerted on the car due to friction and air resistance.

We know that,

Power, P = F v

Where

F is force exerted on the car

[tex]F=\dfrac{P}{v}\\\\F=\dfrac{16405.4}{27.8}\\\\F=590.12\ N[/tex]

So, the average force exerted on the car is 590.12 N.

Answer:

  r ’= 4 r

Explanation:

Electric potential energy is

          U = [tex]k \frac{q_1q_2}{r_{12}}[/tex]k q1q2 / r12

in this exercise

          q₁ = q₂ = q

          U = k q² / r

for when the charge change

           U ’= k q’² / r’

indicate that

      q ’= 2q

      U ’= U

we substitute

           U = k (2q) ² / r ’

           U = 4 k q² / r ’

we substitute

           [tex]k \ \frac{q^2}{r} = 4 k \ \frac{q^2}{r'}[/tex]k q² / r = 4 k q² / r ’

           r ’= 4 r

Answer:

The length of his shadow is decreasing at a rate of 1.13 m/s

Explanation:

The ray of light hitting the ground forms a right angled triangle of height H, which is the height of the building and width, D which is the distance of the tip of the shadow from the building.

Also, the height of the man, h which is parallel to H forms a right-angled triangle of width, L which is the length of the shadow.

By similar triangles,

H/D = h/L

L = hD/H

Also, when the man is 4 m from the building, the length of his shadow is L = D - 4

So, D - 4 = hD/H

H(D - 4) = hD

H = hD/(D - 4)

Since h = 2 m and D = 12 m,

H = 2 m × 12 m/(12 m - 4 m)

H = 24 m²/8 m

H = 3 m

Since L = hD/H

and h and H are constant, differentiating L with respect to time, we have

dL/dt = d(hD/H)/dt

dL/dt = h(dD/dt)/H

Now dD/dt = velocity(speed) of man = -1.7 m/s ( negative since he is moving towards the building in the negative x - direction)

Since h = 2 m and H = 3 m,

dL/dt = h(dD/dt)/H

dL/dt = 2 m(-1.7 m/s)/3 m

dL/dt = -3.4/3 m/s

dL/dt = -1.13 m/s

So, the length of his shadow is decreasing at a rate of 1.13 m/s

Answer:

h = 2755102 m = 2755.102 km

Explanation:

According to the given condition:

Potential Energy = Energy Consumed by Bulb

[tex]mgh = Pt\\\\h = \frac{Pt}{mg}[/tex]

where,

h = height = ?

P = Power of bulb = 75 W

t = time = (2 h)(3600 s/1 h) = 7200 s

m = mass of bulb = 20 g = 0.02 kg

g = acceleration due to gravity = 9.8 m/s²

Therefore,

[tex]h = \frac{(75\ W)(7200\ s)}{(0.02\ kg)(9.8\ m/s^2)}[/tex]

h = 2755102 m = 2755.102 km

Answer:

answer here

Explanation:

the unit of work is fundamental unit because it doesn't depend on other units.

__________________

Thx

Answer:

The SI unit of work is joule (J)

Explanation:

Joule is a derived unit. ∴ unit of work is a derived unit

Power output = volts x amps

Power output = 170 volts x 0.1 amps

Power output = 18 watts

Answer:

The correct answer is "1.2 J".

Explanation:

Seems that the given question is incomplete. Find the attachment of the complete query.

According to the question,

Now,

⇒ [tex]W=\int_{x_1}^{x_2}F \ dx[/tex]

⇒      [tex]=\int_{x_1}^{x_2}-kx \ dx[/tex]

⇒      [tex]=-k \int_{-0.20}^{0}x \ dx[/tex]

By putting the values, we get

⇒      [tex]=-(60)[\frac{x^2}{2} ]^0_{-0.20}[/tex]

⇒      [tex]=-60[\frac{0}{2}-\frac{0.04}{2} ][/tex]

⇒      [tex]=1.2 \ J[/tex]

Answer:

the frequency of this mode of vibration is 138.87 Hz

Explanation:

Given;

length of the copper wire, L = 1 m

mass per unit length of the copper wire, μ = 0.0014 kg/m

tension on the wire, T = 27 N

number of segments, n = 2

The frequency of this mode of vibration is calculated as;

[tex]F_n = \frac{n}{2L} \sqrt{\frac{T}{\mu} } \\\\F_2 = \frac{2}{2\times 1} \sqrt{\frac{27}{0.0014} }\\\\F_2 = 138.87 \ Hz[/tex]

Therefore, the frequency of this mode of vibration is 138.87 Hz

Answer:

The impact force is 98000 N.

Explanation:

mass = 10 tons

The impact force is the weight of the object.

Weight =mass x gravity

W = 10 x 1000 x 9.8

W = 98000 N

The impact force is 98000 N.

Answer:

t=0.417s

Explanation:

After the ball hits the racket it is in freefall(assume air resistance as negligible)

so a=-g

use

x-x0=v0t+1/2at^2

Plug in givens

20=50t-4.9t^2

Solve quadratic equation using quadratic formula

t= 0.417 seconds, (the other answer is extraneous because it is too big because in 1 second, the ball travels 50 meters)

Answer:

B . energy cannot be created or destroyed

Answer:

A) v_{f1} = -3.2 m / s,  B) LEFT , C) v_{f2} = -0.12 m / s,  D) LEFT

Explanation:

This is a collision exercise that can be solved using momentum conservation, for this we define a system formed by gliders, so that the forces during the collision are internal and the moment is conserved.

Let's use the subscript 1 for the lightest glider m1 = 0.160 kg and vo1 = 0.820 m / s

subscript 2 for the heaviest glider me² = 0.820 kg and vo2 = -2.27 m / s

Initial instant. Before the crash

          p₀ = m₁ v₀₁ + m₂ v₀₂

Final moment. After the crash

          p_f = m₁ v_{f1} + m₂ v_{f2}

          p₀ = p_f

          m₁ v₀₁ + m₂ v₀₂ = m₁ v_{f1} + m₂ v_{f2}

 as the shock is elastic, energy is conserved

         K₀ = K_f

         ½ m₁ v₀₁² + ½ m₂ v₀₂² = ½ m₁ [tex]v_{f1}^2[/tex] + ½ m₂ [tex]v_{f2}^2[/tex]

         m₁ (v₀₁² - v_{f1}²) = m₂ (v_{f2}² -v₀₂²)

let's make the relationship

         (a + b) (a-b) = a² -b²

         m₁ (v₀₁ + v_{f1}) (v₀₁-v+{f1}) = m₂ (v_{f2} + v₀₂) (v_{f2} -v₀₂)

let's write our two equations

         m₁ (v₀₁ -v_{f1}) = m₂ (v_(f2) - v₀₂)                                  (1)

         m₁ (v₀₁ + v_{f1}) (v₀₁-v_{f1}) = m₂ (v_{f2} + v₀₂) (v_{f2} -v₀₂)

we solve

         v₀₁ + v_{f2} = v_{f2} + v₀₂

we substitute in equation 1 and obtain

         M = m₁ + m₂

         [tex]v_{f1} = \frac{m_1-m_2}{M} v_o_1 + 2 \frac{m_2}{M} v_f_2[/tex]

         [tex]v_f_2 = \frac{2m_1}{M} v_o_1 + \frac{m_2-m_1}{M} v_o_2[/tex]vf2 = 2m1 / mm vo1 + m2-m1 / mm vo2

we calculate the values

         m₁ + m₂ = 0.160 +0.3000 = 0.46 kg

         v_{f1} = [tex]\frac{ 0.160 -0.300} {0.460} \ 0.820 + \frac{2 \ 0300}{0.460} \ (-2.27)[/tex]

         v_{f1} = -0,250 - 2,961

          v_{f1} = - 3,211 m / s

         v_{f2} = [tex]\frac{2 \ 0.160}{0.460} \ 0.820 + \frac{0.300 - 0.160}{0.460 } \ (-2.27)[/tex]

         v_{f2} = 0.570 - 0.6909

         v_{f2} = -0.12 m / s

now we can answer the different questions

A) v_{f1} = -3.2 m / s

B) the negative sign indicates that it moves to the left

C) v_{f2} = -0.12 m / s

D) the negative sign indicates that it moves to the LEFT

Answer:

The maximum height risen by the bullet-baseball system after the collision is 81.76 m.

Explanation:

Given;

mass of the bullet, m₁ = 0.033 kg

mass of the baseball, m₂ = 0.15 kg

initial velocity of the bullet, u₁ = 222 m/s

initial velocity of the baseball, u₂ = 0

let the common final velocity of the system after collision = v

Apply the principle of conservation of linear momentum to determine the common final velocity.

m₁u₁  +  m₂u₂  = v(m₁  + m₂)

0.033 x 222   +  0.15 x 0     = v(0.033 + 0.15)

7.326  =  v(0.183)

v = 7.326 / 0.183

v = 40.03 m/s

Let the height risen by the system after collision = h

Initial velocity of the system after collision = Vi = 40.03 m/s

At maximum height, the final velocity, Vf = 0

acceleration due to gravity for upward motion, g = -9.8 m/s²

[tex]v_f^2 = v_i^2 +2gh\\\\0 = 40.03^2 - (2\times 9.8)h\\\\19.6h = 1602.4\\\\h = \frac{1602.4}{19.6} \\\\h = 81.76 \ m[/tex]

Therefore, the maximum height risen by the bullet-baseball system after the collision is 81.76 m.

Answer:

 μ = 0.15

Explanation:

Let's start by using Hooke's law to find the force applied to the block

          F = k x

          F = 87.0 0.065

          F = 5.655 N

Now we use the translational equilibrium relation since the block has no acceleration

          ∑ F = 0

          F -fr = 0

          F = fr

the expression for the friction force is

          fr = μ N

if we write Newton's second law for the y-axis

          N -W = 0

          N = W = mg

we substitute

          F = μ mg

          μ = F / mg

          μ = [tex]\frac{5.655}{3.8 \ 9.8}[/tex]

          μ = 0.15

Answer:

The intensity of 4 lawn movers is 86 dB.

Explanation:

Intensity of one lawnmower = 80 dB

Let the intensity is I.

Use the formula of intensity

[tex]dB = 10 log\left ( \frac{I}{Io} \right )\\\\80=10log\left ( \frac{I}{Io} \right )\\\\10^8 = \frac{I}{10^{-12}}\\\\I = 10^{-4} W/m^2[/tex]

Now the intensity of 4 lawn movers is

[tex]dB = 10 log\left ( \frac{4I}{Io} \right )\\\\dB=10log\left ( \frac{4\times10^{-4}}{10^{-12}} \right )\\\\dB = 86 dB\\[/tex]

Answer:

The arrow will bury itself farther by 3S₁

Explanation:

lets assume; the Arrow shot by me has a speed twice the speed of the arrow fired by the younger shooter

Given that ; acceleration is constant , Frictional force is constant

                    A₂ =   A₁

Vf²₂ - Vi²₂ / 2s₂  = Vf₁² - Vi₁² / 2s₁ ---- ( 1 )

final velocities = 0

Initial velocities : Vi₂ = 2(Vi₁ )

Back to equation 1

0 - (2Vi₁ )² / 2s₂ =  0 - Vi₁² / 2s₁

hence :

s₂ = 4s₁

hence the Arrow shot by me will burry itself farther by :

s₂ - s₁ = 3s₁

Note :  S1 = distance travelled by the arrow shot by the younger shooter

Answer:

n × t_1/2

Exmplanation:

The age of meteorite is calculated by multiplying it's quantity n with the half life . This means that the formula is for age of this meteorite is;

Age of meteorite= n × t_1/2

where;

n = quantity of the meteorite

t_/2 = half life of the meteorite

Thus:

The correct formula is; n × t_1/2

Let m be the mass of the second car, so the first car's mass is 2m.

Let K be the kinetic energy of the second car, so the first car's kinetic energy would be K/2.

Let u and v be the speeds of the first car and the second car, respectively. At the start,

• the first car has kinetic energy

K/2 = 1/2 (2m) u ² = mu ²   ==>   K = 2mu ²

• the second car starts with kinetic energy

K = 1/2 mv ²

It follows that

2mu ² = 1/2 mv ²

==>   4u ² = v ²

When their speeds are both increased by 2.76 m/s,

• the first car now has kinetic energy

1/2 (2m) (u + 2.76 m/s)² = m (u + 2.76 m/s)²

• the second car now has kinetic energy

1/2 m (v + 2.76 m/s)²

These two kinetic energies are equal, so

m (u + 2.76 m/s)² = 1/2 m (v + 2.76 m/s)²

==>   2 (u + 2.76 m/s)² = (v + 2.76 m/s)²

Solving the equations in bold gives u ≈ 1.95 m/s and v ≈ 3.90 m/s.

Answer:

A cylindrical specimen of aluminum having a diameter of 0.505 in. (12.8 mm) and a gauge length of 2.0 in. (50.8 mm) is pulled in tension. Use the load-elongation characteristics tabulated below to complete parts (a) through (f).

Answer:

Time

Explanation:

The answer to the question is actually time. Time is not needed when you calculate the mass or volume of an object, a square, sphere, rectangle, or any other 3D shape. You must also calculate the length to know what numbers you will be multiplying by. The answer to the question is time.