Answer:
The hikers average speed due north is 0.2 km per minute.
Explanation:
Speed is the ratio of distance moved by a body to the time taken.
i.e speed = [tex]\frac{distance}{time}[/tex]
Since the hiker walks due north and due west, then his average speed due north can be determined by;
Average speed = [tex]\frac{total distance due north}{total time taken}[/tex]
Total distance due north = 5.0 + 7.0
= 12.0 km
Total time taken = 20 + 40
= 60 minutes
= 1 hour
Average speed due north= [tex]\frac{12}{60}[/tex]
= [tex]\frac{1}{5}[/tex]
= 0.2
Average speed due north = 0.2 km/minute
The hikers average speed due north is 0.2 km per minute.
Imagine a player throwing a football. Explain the action of what is happening to the hand and ball, as well as describe the action force and the reaction force
Answer:
Explanation:
When a player throws a football , he applies force on the ball , due to which ball accelerates in forward direction . This is the action force .
The ball also applies a force on the hand of the player . Due to it the player experiences a pushing force in backward direction . This is reaction force .
Due to this force , the player does not move in backward direction because of frictional force of the ground . The frictional force keeps him stationary .
Thanks + BRAINLIST
Need correct answer ASAP
Answer:
The options are not shown, so it is kinda hard to give you the exact answer.
But i can try to give a general explanation on the topic.
Interference happens when two waves interact between them. We usually use waves with the same wavelength and same phase.
There are two "main" types of interference:
Destructive interference: Happens when the peak of one wave and the trough of the other wave happen in the same place, then when we add these waves, we have a subtraction, and then the amplitude of the resultant wave is smaller than the amplitudes of the original waves (if both initial waves have the same amplitude, then the amplitude of the resultant wave in that position is zero).
Constructive interference: Similar to the previous case, but now the two waves have the peaks or toughs in the same position, then when we add the waves, we have an addition in the amplitude, then the amplitude of the resultant wave will be larger than the amplitudes of the initial waves.
Then if you are looking for constructive interference, you need to look for an option where the peaks of the waves coincide. For example, in the top image we can see, at the top, a wave with an amplitude of 2 units.
And at the bottom a wave with an amplitude of 1 unit.
We also can see that the peaks (and the tough) are in the same place, then we will have constructive interference. Then the amplitude of the resultant wave will be equal to the sum of the amplitudes of the initial waves (2 and 1)
Then the amplitude of the resultant wave is 2 units + 1 unit = 3 units.
What is the speed of a wave with a wavelength of 2 m and a frequency of 9 Hz?
Answer:
The speed of a wave would be 18 with a wavelength of 2 m and a frequency of 9 Hz.
How many moons are in our solar system?
Which of these pairs of atoms are isotpoes? (Physical Science) Pair A Pair B Pair C # protons 6 8 5 2 12 12 # neutrons 8 8 5 3 13 14
Answer:
I guess that the atoms are:
Protons: 6 8 5 2 12 12
Neutrons: 8 8 5 3 13 14
Now, two atoms are isotopes if they share the same number of protons (so both atoms are the same element) but they have a different number of neutrons.
From the given options, the only two that have the same number of protons but a different number of neutrons are:
Protons 12, neutrons 13
and
Protons 12, neutrons 14.
These two are isiotopes.
If you drop a steel metal ball off a building and it takes 3 seconds to hit
the ground, how tall is the building?
Answer:
[tex]40\:\mathrm{m}[/tex]
Explanation:
We can use kinematics equation [tex]\Delta y={v_i}^2+\frac{1}{2}at^2[/tex] to solve this problem. Because the metal ball's initial velocity was 0, [tex]{v_i}^2=0[/tex].
Therefore, our equation becomes:
[tex]\Delta y=\frac{1}{2}at^2[/tex] (freefall equation).
[tex]t[/tex] is given as 3 seconds and [tex]a[/tex] is acceleration due to gravity ([tex]9.81\:\mathrm{m/s}[/tex]).
Therefore, our answer is:
[tex]\Delta y = \frac{1}{2}\cdot9.81\cdot3^2=44.145=\fbox{$40\:\mathrm{m}$}[/tex] (one significant figure).
What distance is required for a train
to stop if its intial Velocity is 23 m/s
and its deceleration is 0.25m/s (Assume the train decelerates at a constant rate.)
Explanation:
what is time in this question
why is the index of refraction important for achromatic lenses?
Answer:
Refractive index is a measure of how light propagates through a material. The higher the refractive index the slower the light travels, which causes a correspondingly increased change in the direction of the light within the material.
Explanation:
what kind of plate boundary is ocean ocean?
A horizontal pole is attached to the side of a building. There is a pivot P at the wall and a chain is connected from the end of the pole to a point higher up the wall. There is a tension force F in the chain. What is the moment of the force F about the pivot P?
Answer:
Fscos63
Explanation:
Given that a horizontal pole is attached to the side of a building. There is a pivot P at the wall and a chain is connected from the end of the pole to a point higher up the wall. There is a tension force F in the chain. What is the moment of the force F about the pivot P?
Taking the moment from the pivot point P, that means the moment at point p = 0
Then, if we consider the weight mg of the pole, according to the principle of equilibrium : sum of the upward forces equal to the sum of the downward forces.
Therefore, mg = Fsinø ....... (1)
Also, taking moment at point P
Let the length of the pole = s
The length of the weight of the pole = 1/2 S
Fscosø = mgs/2
The distance s will cancel out
2Fcosø = mg ...... (3)
Substitute mg in equation 1 into equation 3
2fcosø = fsinø
F will cancel out
Tanø = 2
Ø = tan^-1(2)
Ø = 63.4 degree
The moment of force F about pivot point P will be
Moment = force × distance
Moment = Fcos63 × S
Moment = Fscos63
IS IT B!! if not pls helpp!
Answer:
I believe you are correct but we just started this unit
Explanation:
A car battery produces 12 from electric that each produce 2.0 V. What is the minimum number of electric cells in car battery?
Answer:
6
Explanation:
From the given question, since a total of 12 V was obtained from the battery which is made up of a number of cells with each producing 2.0 V.
Assuming that the cells have a very low internal resistance, then;
minimum number of electric cells in the car battery = [tex]\frac{total voltage from the cells}{individual voltage of the cells}[/tex]
= [tex]\frac{12}{2}[/tex]
= 6
Thus, the minimum number of electric cells in the car battery is 6.
This implies that the addition of 6 cells which has 2.0 V supply in the battery produces a total of 12 V. Provided that the cells have a very low internal resistance.
An object moves with constant velocity .
•1st law
•2nd law
Answer:
An object moves with constant velocity .
Explanation:
•2nd law
unit conversion
3 blarps = 7 glorps
8 glorps = 17 trangs
11 trangs = 5 slurps
2 slurps = 23 kilps
How many kilps are in 3 blarps?
Answer:
I don't know
Explanation:
There is not enough info to solve this problem...
Hi!! Does anyone know this answer? :D
Answer:
Im not fully corrrect but I would say C
Explanation:
What is the gravitational force of attraction between a 55 kg boy and a 40 kg girl if they are 0.10 meters apart?
Answer:
[tex]1.5\cdot 10^{-5}\:\mathrm{N}[/tex]
Explanation:
Newton's Law of Gravitation is given as:
[tex]F=G\frac{m_1m_2}{r^2}[/tex], where [tex]G[/tex] is gravitational constant [tex]6.67\cdot 10^{-11}[/tex] and [tex]r[/tex] is the distance between their centers of mass.
Therefore, the gravitational force between them is:
[tex]F=6.67\cdot 10^{-11}\frac{55\cdot40}{0.1^2}= \fbox{$1.5\cdot 10^{-5}\:\mathrm{N}$}[/tex] (two significant figures).
A student is leaving the lesson and walking to Maths at a speed of 1m/s. He notices that he is late for the lesson and speeds up to 3 m/s. It takes him 4 seconds to speed up. Calculate his acceleration.
Answer:
Acceleration = 0.5 m/s²
Explanation:
Given the following data;
Initial velocity, u = 1m/s
Final velocity, v = 3m/s
Time, t = 4 seconds
To find acceleration;
In physics, acceleration can be defined as the rate of change of the velocity of an object with respect to time.
This simply means that, acceleration is given by the subtraction of initial velocity from the final velocity all over time.
Hence, if we subtract the initial velocity from the final velocity and divide that by the time, we can calculate an object’s acceleration.
Mathematically, acceleration is given by the equation;
[tex]Acceleration (a) = \frac{final \; velocity - initial \; velocity}{time}[/tex]
[tex]a = \frac{v - u}{t}[/tex]
Substituting into the equation, we have;
Acceleration = (3 - 1)/4
Acceleration = 2/4
Acceleration = 0.5 m/s²
What is the working principle of an electric motor?
a) Electromagnetic induction.
b) An electric current flowing through a matallic wire produces magnetic
field.
c) Relative motion of a coil in a magnetic field produces electric current.
d) A current carrying wire experiences a force in a magnetic field.
Henry designs an experiment to find out why plants without flowers tend to be wind-pollinated and not animal-pollinated. He takes samples from a variety of plants and studies them in the field. He finds that the evidence supports his hypothesis. Which of these was the hypothesis Henry was testing? Choose the correct answer. Nonflowering plants make less pollen than flowering plants. Nonflowering plants lack the structures to attract animal pollinators. Nonflowering plants grow close to the ground and capture fewer pollinators. Nonflowering plants grow close to the ground because they have no pollen grains.
Answer:
option 2
Explanation:
you are very welcom
A ‘can-chiller’ is used to make a can of drink colder. The initial temperature of the liquid in the can was 25.0 °C. The can-chiller decreased the temperature of the liquid to 20.0 °C. The amount of energy transferred from the liquid was 6930 J. The mass of liquid in the can was 0.330 kg.
Calculate the specific heat capacity of the liquid. Give the unit.
Please help :)
Answer:
4200 J/°C/kg
Explanation:
The formula for heat transfer is given by :
Q= m*c*ΔT where;
Q= heat transferred = 6930 J
m=mass of the liquid = 0.330 kg
c= specific heat capacity=?
ΔT = 25-20 = 5.0°C
Applying the values in the formula as;
Q= m*c*ΔT
6930 = 0.330 * c * 5
6930 = 1.65 c
6930/1.65 = c
4200 = c
c= 4200 J/°C/kg
velocity of sound in solid is more than that in liquid.why?
Velocity of sound travels faster in solids than in liquids, and faster in liquids than in gases because "the density of solids is higher than that of liquids, meaning that the particles are closer together."
Answer:
Explanation:
Due to the fact that sound is caused by vibrations, it's more noticeable in liquid because the vibrations may cause ripples in the liquid
7. Mac and Tosh are arguing about the track design. Mac claims that the car is moving fastest at point F because it is furthest along the track Tosh disagrees, claiming that the car moves fastest at point F because point F is at the lowest height Who do you agree with? Make a modification of the track design for point F and gather some evidence to support one claim or the other. Then discuss what changes you made, what observations were made, and the reasoning that supports one of the claim of either Mac or Tosh.
Answer:
Tosh is correct.Swap the locations of points B and F on the track and gather speed data. If Mac is correct, the speed at F (closer to the start) should be lower. (It will not be, confirming Tosh's claim.)Explanation:
The total energy of the car is continuously being exchanged between potential energy and kinetic energy as the car moves along the track. Neglecting energy loss due to friction, the kinetic energy will be greatest when the potential energy is least, at the lowest point on the track. As a consequence we agree with Tosh that the speed will be greatest at F because it is the lowest point.
__
If the track were modified to move the lowest point nearer the start, say by interchanging points B and F, then data could be gathered to show whose theory is supported. The evidence needed is the speed of the car at the new location of point F. Tosh's argument is supported if the speed at the new point F is substantially the same.
HELP ME ASAP PLZZ
Which of the following is not a measurement taken by a radiosonde?
a. atmospheric composition
b. atmospheric pressure
c. wind speed
d. wind direction
Answer:
A atmospheric composition
If there is a difference in air pressure between two locations, what happens?
Answer:
High in the atmosphere, air pressure decreases. ... A low pressure system has lower pressure at its center than the areas around it. Winds blow towards the low pressure, and the air rises in the atmosphere where they meet. As the air rises, the water vapor within it condenses, forming clouds and often precipitation.
Explanation:
Planet Beta has two times a gravitational field strength and two times the mass of the Earth. How does the radius of planet beta compared with the radius of Earth
Answer:
rbeta=rearth
Explanation:
khan
Planet Beta has 2 times the gravitational field strength and 2 times the mass of the Earth.
How does the radius of planet Beta compare with the radius of Earth?
Answer: CORRECT (SELECTED
rBeta = rEarth
A 10.0kg box sits at rest on ramp that has an incline of 20.0° from the horizontal. What is the force of gravity acting on the box?
A. -98.0N
B. 98.0N
C. -92.1N
D. -33.5N
Answer:
98.0N
Explanation:
If Minnie the Mouse starts moving at 2m/s and increases her velocity to 4m/s because she is being chased, what is heracceleration if the time is 2 seconds?
Answer:
1m/s²
Explanation:
Given parameters:
Initial velocity = 2m/s
Final velocity = 4m/s
Time of chase = 2s
Unknown:
Acceleration = ?
Solution:
Acceleration is the rate of change of velocity with time;
A = [tex]\frac{v - u }{t}[/tex]
A is the acceleration
v is the final velocity
u is the initial velocity
t is the time taken
A = [tex]\frac{4 - 2}{2}[/tex] = 1m/s²
What type of wave did you create when you pushed your arm back and forth?
plz help
Answer: It is a transverse wave ^^
Explanation:
A person runs 15.0 km north then turns around and runs 10.0 Km south. what is his dstance
Answer:
25km
Explanation:
The person runs 15km Northward
Turns around and runs 10km southward
The distance is the length of path covered by the person running.
This is given as:
Distance = Distance North + Distance South
Distance = 15km + 10km = 25km
Answer:
25km
Explanation:
cant explain but ik
TIMED URGENT! REALLY APPRECIATE HELP!! TYSM!!!!!
What is the average Speed of the roller coaster? *
20 meters per second
20 meters per minute
20 m/hr
Answer:
1st
Explanation:
20 meters per second
Explanation:
look at the chart
