a) is that the net operating income will increase by $20 per month. To calculate this, we add the additional $2 of variable expense per unit to the existing $8 of variable expense per unit, which equals $10 of total variable expense per unit. We then multiply this by the 10 units of increased sales, which equals $100. We then subtract the $100 from the original $80 of net operating income, resulting in an increase of $20 per month.
B) higher-quality components should be used depends on the company's overall objectives. If the company is looking to increase profits and/or improve customer satisfaction, then the higher-quality components may be a good option. The increase in variable expense will be offset by the increase in unit sales, and customers would likely appreciate the improved quality. On the other hand, if the company is looking to keep costs down, then the higher-quality components may not be the best option. Ultimately, the decision should depend on the company's goals and budget.
Know more about Net operating income here:-
https://brainly.com/question/28524695#
#SPJ11
a. What is gross domestic product (GDP)? Calculate each component’s share of GDP.b. Suppose government spending increases to 150, but the other components of GDP do not change. What is government spending’s share of GDP now? What is the new nongovernment share?c. Suppose that the level of potential GDP (Y*) is 1,000 and is unaffected by the increase in government spending described previously. Without doing any calculations, explain in general terms what happens to C/Y*, X/Y*, and I/Y* after the government spending increase in (b).d. Describe the mechanism by which each of these changes happens.
Question a: Gross Domestic Product (GDP) is the sum total of all economic activity within a country over a certain period of time. It is equal to the sum of Consumption (C), Investment (I), Government Spending (G), and Net Exports (X). C/Y* = C/Y, I/Y* = I/Y, X/Y* = X/Y
Question b: After the increase in government spending to 150, the government spending’s share of GDP is now 15% and the nongovernment share is 85%.
Question c: The increase in government spending causes C/Y*, I/Y*, and X/Y* to decrease since the government spending increases while C, I, and X do not change.
Question d: The mechanism by which C/Y*, I/Y*, and X/Y* decrease is through an increase in the denominator, GDP. Since only the numerator (C, I, and X) remains the same, the fraction of each component relative to GDP decreases.
To know more about Gross Domestic Product click on below link:
https://brainly.com/question/14768180#
#SPJ11
8) An advantage of a pure project where self-contained teams work full time on a project is when the following? A. Team members can work on several projects B. Functional area is a "home" after the project is completed C. There are duplicated resources D. Lines of communication are shortened E. Overall organizational policies and goals can be ignored
An advantage of a pure project where self-contained teams work full time on a project is when the following D- Lines of communication are shortened.
What's Pure projectIt is a type of project organization in which a self-contained team works full-time on the project; team members are regularly removed from their functional departments and work under the direction of a project manager.
Here are the advantages of pure project where self-contained teams work full time on a project:
Shortened Lines of Communication:
Team members are removed from their functional departments and work directly with the project manager in a pure project organization. The project manager, therefore, does not need to interact with many functional managers. The project manager can get information about the project and make decisions quickly because of the limited levels of interaction, which means that communication lines are shortened.Hence, option D, Lines of communication are shortened, is the correct choice.
Learn more about working full times at
https://brainly.com/question/28832508
#SPJ11
To eliminate an AD shortfall of $120 billion when the economy has an MPC of 0.75, the government should decrease taxes by:a. $400 billionb. $120 billionc. $30 billiond. $40 billione. none of the above
To eliminate an AD shortfall of $120 billion when the economy has an MPC of 0.75, the government should decrease taxes by $30 billion. (option c)
To eliminate an AD (Aggregate Demand) shortfall of $120 billion when the economy has an MPC (Marginal Propensity to Consume) of 0.75, the government should decrease taxes by:
Change in aggregate demand = 1 / (1 - MPC) x Change in autonomous spending
where MPC = 0.75 and Change in aggregate demand = AD shortfall = $120 billion
Therefore, the equation becomes:
$120 billion = 1 / (1 - 0.75) x Change in autonomous spending
$120 billion = 4 x Change in autonomous spending
Change in autonomous spending = $30 billion
Since the government wants to decrease taxes to eliminate the AD shortfall, the decrease in taxes should be equal to the change in autonomous spending, which is $30 billion. Therefore, the correct answer is (c) $30 billion.
Learn more about AD shortfall here:
https://brainly.com/question/13847408
#SPJ11
Michael owns 100 shares of stock in the Samson Electricals Corporation, but as a stockholder he does not have the right to vote in stockholders' meetings. In this scenario, Michael owns common stock. True or False?
The given statement "Michael owns 100 shares of stock in the Samson Electricals Corporation, but as a stockholder, he does not have the right to vote in stockholders' meetings. Michael owns common stock. " is true because Michael does not have the right to vote in stockholders' meetings even though he owns shares, this is an example of a case where Michael owns common stock instead of preferred stock.
Common stock refers to a stock that represents the basic ownership of a corporation. The common stockholders have the right to vote on issues that affect the company's direction and are entitled to receive dividends. The right to vote in stockholders' meetings is not applicable to preferred stockholders. As a result, common stockholders have the most control over the company. Therefore, the statement is true.
You can learn more about common stock at
https://brainly.com/question/25765493
#SPJ11
To record a bill payment that is made immediately with a credit card when the product or service is received, use the following onscreen form:
a. Pay Bill
b. Check
c. Bill
d. Expense
A Bill of Lading documents a service that the business has received and is obligated to pay the vendor later. An expense form keeps track of costs that were paid at the time a product was produced.
What is the name of the source document used in a transaction demanding quick payment?A debit note is a document that either a seller uses to remind a buyer of ongoing debt responsibilities or a buyer creates when returning items they borrowed. There may be information concerning an immediate payment on the debit note.
What does it mean in accounting to record a transaction in a debit credit form?Double-entry bookkeeping is a system of documenting transactions in which an entry is made as a debit or credit to at least two accounts for each business transaction.
To know more about Bill of Lading visit :-
https://brainly.com/question/29910938
#SPJ1
for her new mortgage, jessica wants to pay one point as an upfront fee to get a lower interest rate on the loan. if her loan amount is $200,000, how much will she pay for the lower rate (point)?
For her new mortgage, Jessica wants to pay one point as an upfront fee. Jessica will pay $2,000 for one point.
Paying one point as an upfront fee means paying an amount equal to 1% of the total loan amount to the lender at the time of closing. In exchange for paying this fee, the lender will offer a lower interest rate on the loan, which can result in lower monthly mortgage payments.
Paying points can be a good strategy for borrowers who plan to stay in the home for a long period of time and want to save money on interest over the life of the loan.
To calculate how much Jessica will pay for one point, we need to first determine the value of one point.
One point is equal to 1% of the loan amount.
Therefore, 1 point on a $200,000 loan is:
1% x $200,000 = $2,000
So, Jessica will pay $2,000 for one point.
Learn more about mortgage here:
https://brainly.com/question/29981765
#SPJ11
place the following steps for assigning costs to units of product using process costing in order. instructions choice 1 of 5. identify the total costs to be accounted for. toggle button identify the total costs to be accounted for. choice 2 of 5. assign costs to batches of work toggle button assign costs to batches of work choice 3 of 5. compute the equivalent units of production. toggle button compute the equivalent units of production. choice 4 of 5. record the physical flow of resources. toggle button record the physical flow of resources. choice 5 of 5. compute costs per equivalent unit. toggle button compute costs per equivalent unit.
Process costing is a method that is utilized by companies to determine the manufacturing costs of the products.
The following are the steps to be followed to assign costs to units of product using process costing. Identify the total costs to be accounted for. Record the physical flow of resources. Compute the equivalent units of production. Assign costs to batches of work. Compute the costs per equivalent unit. Here is an explanation of the above steps in detail:1. Identify the total costs to be accounted for. The first step in the process costing method is to identify the total cost to be accounted for. This involves the identification of all the costs incurred during the production process. The costs may include direct materials, direct labor, and manufacturing overhead.2. Record the physical flow of resources. The second step is to record the physical flow of resources. This involves tracking the movement of materials and labor throughout the production process. The records should show when materials were received, when they were used, and when they were completed.3. Compute the equivalent units of production. The third step is to compute the equivalent units of production. This involves determining the number of units produced and the degree of completion of the production process.4. Assign costs to batches of work. The fourth step is to assign costs to batches of work. This involves allocating the total costs of production to the different batches of products.5. Compute the costs per equivalent unit. The final step is to compute the costs per equivalent unit. This involves dividing the total cost of production by the total number of equivalent units produced. This gives the cost per unit of production.
For more questions on manufacturing costs
https://brainly.com/question/2320723
#SPJ11
how would return on equity be different if a company were to issue $100,000 of 10% bonds instead of $100,000 in stock? assume income before interest and taxes is estimated to be $100,000, income taxes are 21% and stockholders' equity is initially $200,000. return on equity would be
If the company were to issue $100,000 of 10% bonds instead of $100,000 in stock, the return on equity would be 34.5%.
Return on equity (ROE) is a financial ratio that measures the profitability of a company by calculating the amount of net income returned as a percentage of shareholder's equity. ROE is calculated as:
ROE = Net Income / Shareholder's Equity
Assuming income before interest and taxes is estimated to be $100,000, income taxes are 21%, and stockholders' equity is initially $200,000, the net income after taxes would be:
Net Income = Income Before Taxes x (1 - Tax Rate)
Net Income = $100,000 x (1 - 0.21)
Net Income = $79,000
If the company were to issue $100,000 of 10% bonds instead of $100,000 in stock, the interest expense would be:
Interest Expense = Bond Amount x Interest Rate
Interest Expense = $100,000 x 0.10
Interest Expense = $10,000
This interest expense would be deducted from the net income before calculating the ROE. Therefore, the net income available to shareholders would be:
Net Income Available to Shareholders = Net Income - Interest Expense
Net Income Available to Shareholders = $79,000 - $10,000
Net Income Available to Shareholders = $69,000
Assuming the company issues $100,000 in bonds, the shareholder's equity would remain at $200,000, since there is no change in the amount of equity.
Using the formula for ROE, we can calculate the ROE with the bond issue as:
ROE = Net Income Available to Shareholders / Shareholder's Equity
ROE = $69,000 / $200,000
ROE = 0.345 or 34.5%
Therefore, the ROE would be 34.5% if the company were to issue $100,000 of 10% bonds instead of $100,000 in stock. This is lower than the ROE that would be obtained if the company were to issue stock, as the interest expense associated with the bonds reduces the net income available to shareholders.
Learn more about return on equity here:
https://brainly.com/question/28148396
#SPJ11
if a person spends $10 a week on coffee (assume $500 a year), what would be the future value of that amount over 6 years if the funds were deposited in an account earning 3 percent?
Answer:
The future value (FV) is the total value of the investment at the end of the period. The future value is calculated by combining the initial investment with the interest earned over the period.
Explanation:
The formula for calculating the future value is:
FV = PV × (1 + r)n
Where FV is the future value; PV is the present value; r is the interest rate; n is the number of compounding periods
Since the person spends $10 on coffee per week or $500 per year, the present value is $500. Also, the interest rate is 3%, and the number of compounding periods is 6 years. Therefore, we can calculate the future value as:
FV [tex]= PV × (1 + r)^n[/tex]
[tex]= $500 × (1 + 0.03)6[/tex]
[tex]= $500 × 1.191[/tex]
[tex]= $595.50[/tex]
Therefore, the future value of $500 deposited in an account earning 3 percent after 6 years is $595.50.
Learn more about future value here:
https://brainly.com/app/ask?q=future+value
#SPJ11
Trung and Dylan are business partners. Their company, Grow iO, develops pesticide-resistant seeds. They initially started the business with their savings. However, now the company plans to expand its operations, and the required amount of capital cannot be raised through savings or by reinvesting profits. Thus, the partners have decided to sell stock in their business to family members, friends, and employees. Which of the following sources of capital have Trung and Dylan planned to use for the expansion of their business?
Multiple Choice
A. debt financing
B. bootstrapping
C. equity financing
D. mortgaging
E. factoring
Trung and Dylan have planned to use Equity financing for the expansion of their business. The correct answer is C. equity financing.
It can be venture capital (VC) or angel investor in order to raise funds for business expansion. Equity financing, unlike debt financing, does not require a regular payment of interest or principal, making it a better option for businesses with uncertain future cash flows.
In the scenario given, the partners have decided to sell stock in their business to family members, friends, and employees. This process is known as equity financing. So, the correct answer is C. equity financing.
Learn more about equity financing https://brainly.com/question/12524731
#SPJ11
If the project manager changes an activity on the critical path to start at a later date, then the whole project will end at a later date. a. True b. False.
When the project manager changes an activity on the critical path to start at a later date, then the whole project will end at a later date. This statement is true.
A critical path is defined as the series of connected activities that determine the project’s completion date. The critical path is the longest duration path through the network, and it determines the shortest time to complete the project. It is essential to understand the critical path to complete the project on time.A delay in the critical path will cause the project completion date to slip. The critical path will be changed if there is a delay in any activity, causing the whole project to end at a later date. The critical path will change to the new series of connected activities, which will determine the new project completion date.The critical path method (CPM) is used to manage the project schedule. It is a planning tool used to calculate the project's duration and its critical path. The CPM is used to calculate the project duration and the expected completion date. The CPM is essential for project management and control.The critical path method is a useful tool for managing and controlling project schedules. The CPM is used to determine the duration of the project, the critical path, and the expected completion date. A delay in the critical path can cause the project to end at a later date, and a change in the critical path will determine the new project completion date.
for more questions on project manager
https://brainly.com/question/15610382
#SPJ11
because of a change in the required rate of return from 11 percent to 13 percent, the bond price of a zero-coupon bond will fall from $1,000 to $860. thus, the bond price elasticity for this bond is
Because of a change in the required rate of return from 11 percent to 13 percent, the bond price of a zero-coupon bond will fall from $1,000 to $860. Therefore, the bond price elasticity for this bond is -1.16.
How to find the bond price elasticity?The formula for calculating bond price elasticity is:
P = ((P₁ - P₀) / ((P₁ + P₀) / 2)) / ((Y₁ - Y₀) / ((Y₁ + Y₀) / 2))
Where:
P₀ = Initial price of the bond
P₁ = New price of the bond
Y₀ = Initial yield to maturity of the bond
Y₁ = New yield to maturity of the bond
Given:
P₀ = $1,000
P₁ = $860
Y₀ = 11%
Y₁ = 13%
Substituting the given values into the formula we will get the bond price elasticity for this bond is -1.16
Learn more about bond price elasticity here:
brainly.com/question/15203846
#SPJ11
Fact Pattern 3-1. Amanda is a twenty-four-year-old student. For two years Amanda has been going to gym and using weight equipment, stationary bicycles, and step machines to improve muscle tone. One spring afternoon Amanda was using a weight machines in the usual way (and the way she was showed how to use it), when the machine malfunctioned causing her serious injury. The company that made the machine, Musclematic, has known for the past year that this problem existed, but the company took no steps to warn people who owned or used these machines of the problem. Refer to Fact Pattern 3-1. You are Amanda's attorney. To begin your lawsuit against Musclematic you must first: a. file for a hearing b. file a complaint c. file a reply d. file an answer e. file a counterclaim
As Amanda's attorney, the first thing you must do to begin your lawsuit against Musclematic is to file a complaint.
What is a lawsuit? A lawsuit is a case or a dispute that is resolved through legal proceedings. A lawsuit is a formal legal action taken against another party. It begins when one party (the plaintiff) files a complaint against the other party (the defendant).
What is a complaint? A complaint is a written document that outlines the plaintiff's claims against the defendant. The complaint includes details about the plaintiff's case, such as the injuries or damages suffered, and the legal basis for the claim. The complaint also requests a specific form of relief, such as monetary damages or an injunction against the defendant. Once the complaint is filed, the defendant has a certain amount of time to respond to the allegations made against them.
In this case, Amanda's attorney must file a complaint against Musclematic to begin the lawsuit.
To learn more about “ lawsuit” refer to the https://brainly.com/question/24910850
#SPJ11
match the definitions with their correct term or bond feature. - the rate of interest paid on the face value (par value) of the bond. - the bondholder's required rate of return. this is also the internal rate of return on the cash flows received by the bondholder that assumes the investor can reinvest the cash flows received from the bond at this rate. - the period of time over which the bond issuer must continue to pay coupon payments. - the legal document that states the bond contract requirements such as repayment schedules, restrictions, and promises between the issuer of a corporate bond and the purchaser.
In the following question, among the given options on terminology, Coupon rate: "The rate of...the bond, " Required rate of return- "The bondholder's...bond at this rate." Maturity- "The period of time.....coupon payments." Indenture- "The legal document...and the purchaser."
The definitions provided match the following terms or bond features:
Coupon rate: The rate of interest paid on the face value (par value) of the bond.Required rate of return: The bondholder's required rate of return. This is also the internal rate of return on the cash flows received by the bondholder that assumes the investor can reinvest the cash flows received from the bond at this rate.Maturity: The period of time over which the bond issuer must continue to pay coupon payments.Indenture: The legal document that states the bond contract requirements such as repayment schedules, restrictions, and promises between the issuer of a corporate bond and the purchaser.For more such questions on terminology
https://brainly.com/question/25965295
#SPJ11
which of the following are challenges potentially presented by alliances or joint ventures? (a) partners may have different goals and priorities; (b) one partner may absorb all the knowhow of the other and subsequently become a competitor; (c) they tend to break down when one of the partners attempts to expand into an emerging market.
The right answer is option C because this is what usually happens when one of the partners tries to expand into a developing market.
What drawbacks exist with joint ventures?A joint venture is a popular way to combine the resources of two firms that are otherwise unrelated in order to fulfill a project or objective while minimizing costs and distributing the associated risk.
Joint ventures between businesses are typically transient alliances.
Unless a distinct legal body is established specifically for the joint venture, the contract that creates joint ventures exposes each company to the liability that comes with a partnership.
Despite the fact that joint-venture partners share control, work processes and resource allocation are not necessarily distributed equally .
To know about joint venture visit:
https://brainly.com/question/29879369
#SPJ1
What to look for when hiring a creative director?
When hiring a creative director, it is important to look for certain qualities and qualifications such as a strong portfolio, leadership skills, effective communication, adaptability, problem-solving abilities, industry knowledge, strong collaboration skills, attention to detail, and time management skills.
When hiring a creative director, you should look for the following qualities:
1. Strong portfolio: Review their past work to ensure they have a solid background in design, branding, and creative direction.
2. Leadership skills: A creative director must be able to effectively lead and manage a team of designers, writers, and other creative professionals.
3. Effective communication: They should be able to clearly articulate their ideas and vision to both their team and clients.
4. Adaptability: A good creative director can adapt to changing trends and be open to new ideas and technologies.
5. Problem-solving abilities: They should be able to identify challenges and develop creative solutions to overcome them.
6. Industry knowledge: A strong understanding of the industry they will be working in is essential for creating effective campaigns and designs.
7. Strong collaboration skills: The creative director should be able to work well with others, including clients and team members, to achieve the best results.
8. Attention to detail: High-quality work requires a keen eye for detail and consistency in design elements.
9. Time management skills: The ability to prioritize tasks and meet deadlines is crucial for the successful completion of projects.
Learn more about Creative director here:
https://brainly.com/question/14595545
#SPJ11
a series of questions that attempt to deconstruct a business issue by moving from general to specific are known as _____ questions. multiple choice: A)rapport-building B) funnel C) probing D) closed E) solution-oriented
A series of questions that attempt to deconstruct a business issue by moving from general to specific are known as solution-oriented questions.
What are solution-oriented questions? Solution-oriented questions is a method for examining issues and generating alternatives. It's a process of asking questions that are meant to identify potential solutions or improvements to a current issue. Solution-oriented questioning leads to answers that can lead to the development of an action plan that addresses the issue.
These types of questions concentrate on current and future results, with the goal of developing solutions rather than dwelling on problems. Solution-oriented questioning emphasizes collaboration, positive thinking, and the use of strengths to achieve goals.
Read more about a business issue here:https://brainly.com/question/30091710
#SPJ11
all accounts that appear in the balance sheet, including retained earnings, are permanent accounts, and we carry forward their balances from period to period. group startstrue or falsetrue, unselectedfalse, selected
True. All accounts that appear in the balance sheet, including retained earnings, are permanent accounts, and we carry forward their balances from period to period.
A balance sheet is a financial statement that summarizes a company's assets, liabilities, and equity. The balance sheet is a snapshot of the company's financial position at a single point in time, detailing what the company owns (assets), what it owes (liabilities), and the value of shareholder equity.
Balance sheet accounts are classified into two categories: permanent accounts and temporary accounts. The accounts that appear in the balance sheet are permanent accounts, while the accounts that appear in the income statement and statement of cash flows are temporary accounts.
Learn more about balance sheet at https://brainly.com/question/1113933
#SPJ11
Part D
The energy delivered to the resistive coil is dissipated as heat at a rate equal to the power input of the circuit. However, not all of the energy in the circuit is dissipated by the coil. Because the emf source has internal resistance, energy is also dissipated by the battery as heat. Calculate the rate of dissipation of energy Pbat in the battery.
Express your answer in watts using three significant figures.
Learning Goal:
To practice Problem-Solving Strategy 25.1 Power and Energy in Circuits.
A device for heating a cup of water in a car connects to the car's battery, which has an emf E = 10.0 V and an internal resistance rint = 0.05 Ω . The heating element that is immersed in the cup of water is a resistive coil with resistance R .
David wants to experiment with the device, so he connects an ammeter into the circuit and measures 10.5 A when the device is connected to the car's battery. From this, he calculates the time to boil a cup of water using the device. If the energy required is 100 kJ , In reality, heat is lost to the environment over time, removing energy from the system. In order to bring the water to a boil, energy must be added to the system at a rate greater than that at which it is removed. Considering how long it would take without losses, this device may only be suitable for warming beverages or keeping hot ones hot. A IS THE CORRECT CIRCUIT SO NOW WHAT I NEED IS THE DISSIPATION OF ENERGY Pbat IN THE BATTERY.
WE ALREADY KNOW THAT t = 16.8
minutes time t will it take to boil the water in the cup
The total energy required to bring the water to a boil is thus 1876 kJ.
The energy dissipated in the battery is calculated using the formula P = IV, where P is the power, I is the current, and V is the voltage. Since the current is known to be 10.5 A and the voltage is 10.0 V, the power dissipated in the battery is Pbat = 105 W.
This power is the rate at which energy is dissipated by the battery. To calculate the total energy dissipated by the battery, we can multiply the power by the time taken for the water to boil. Since it takes 16.8 minutes for the water to boil, the total energy dissipated by the battery is Ebat = Pbat × t = 105 W × 16.8 min = 1776 kJ.
This energy must be added to the energy required to boil the cup of water, which is 100 kJ. The total energy required to bring the water to a boil is thus 100 kJ + 1776 kJ = 1876 kJ.
In reality, the energy dissipated by the battery is not enough to boil the cup of water, since heat is lost to the environment over time. To compensate for these losses, the energy dissipated by the battery must be increased. This means that the device may not be suitable for boiling water, but may be suitable for warming beverages or keeping them hot.
For more about energy dissipated:
https://brainly.com/question/15331125
#SPJ11
a single-business diversification strategy and a dominant-business diversification strategy are both examples of what level of diversification? a. moderate to high level b. very high level c. low level d. very low level
A single-business diversification strategy and a dominant-business diversification strategy are both examples of a low level of diversification. Alternative b is correct.
Low-level diversification refers to a strategy in which a company operates within a single industry or market, and generates most of its revenue from a single product or service line.
A single-business diversification strategy involves expanding into related products or services within the same industry, while a dominant-business diversification strategy involves expanding into products or services that are related to the core business, but still represent a small proportion of overall revenue.
In conclusion, alternative b. low level is correct.
See more about diversification at https://brainly.com/question/18647091.
#SPJ11
Amherst Machine is a manufacturer of tools. How much corporate income tax must they pay on $1900000 in income. Use the tax rates in Chapter 2's Workshop 2.1 to answer this question. $ Your answer should be in the form of dollars without a comma or dollar sign (for example, 2775).
the Amherst Machine's corporation tax amount is $115,750.
How to determine the number of TaxThe income tax for Amherst Machine, a tool manufacturer, is calculated below:
Income: $1,900,000
Taxable income = Income - Deduction = $1,900,000 - $625,000 = $1,275,000
Income Tax = Base tax + Rate of excess over
Amount range for base tax
Base Tax = $22,250
Rate = 0.34
Excess over Amount range for base tax = ($1,275,000 - $1,000,000) = $275,000
Income Tax = $22,250 + (0.34 × $275,000) = $22,250 + $93,500
Income Tax = $115,750
Therefore, the Amherst Machine's corporation tax amount is $115,750.
Learn more about Corporate tax at
https://brainly.com/question/30092524
#SPJ11
Absorption costing treats fixed manufacturing overhead as a ______ cost.a. promotion
b. profit
c. price
d. product
Absorption costing treats fixed manufacturing overhead as a option (d) product
Absorption costing is a method of accounting for the cost of producing a product that includes all direct costs (such as direct materials and direct labor) and indirect costs (such as manufacturing overhead) associated with the production of that product.. In absorption costing, fixed manufacturing overhead costs are considered to be a product cost because they are part of the cost of producing a unit of product.
This means that fixed manufacturing overhead costs are absorbed into the cost of each unit of product, along with variable manufacturing costs such as direct materials and direct labor.
Therefore, the correct answer is (d) product.
Learn more about Absorption costing here
brainly.com/question/31116042
#SPJ4
Hypothesis testing is a method of using data relevant to a claim to test the likelihood that the claim is accurate. Which of the following is an ethical use of hypothesis testing in a business situation?
As an ethical business owner, you want to find out if the claims you are making about the product you market are accurate. You conduct one or more hypothesis tests to check.
You did not do something to evaluate product condition
The ethical use of hypothesis testing in a business situation is to find out if the claims being made about the product are accurate. Hypothesis testing is a way of determining whether or not a hypothesis is accurate.
Hypothesis testing is an important tool for businesses, as it allows them to test their ideas and theories about the market and the products they sell. This can help businesses to make better decisions about how to market and sell their products, as well as identify potential areas for improvement. It involves a set of statistical methods used to determine whether or not an effect or relationship is real, based on data.
In conclusion, an ethical use of hypothesis testing in a business situation is to test the accuracy of claims made about the product.
Learn more about hypothesis testing at https://brainly.com/question/4232174
#SPJ11
carol was asked by her boss to develop a master budget for the company she works for, ''the big spoon.'' she doesn't know where to start with this project. which budget would you suggest she start with, and why?
Carol should begin her master budget for "The Big Spoon" by creating an operational budget. An operational budget will help Carol organize the company's expenses and anticipate the necessary funding for upcoming operations. It also helps provide a financial forecast to ensure the company meets its financial goals.
An operational budget should include an estimate of fixed and variable costs, such as personnel costs, rent, taxes, and other expenses. Carol should also account for any changes that may occur in the market, such as increases in the price of raw materials, changes in demand, or new taxes. This will ensure that the budget she creates is flexible and adaptable.
Additionally, Carol should consider the company's current financial situation. This will help her identify any potential financial risks and take the necessary steps to mitigate them. She should also create a timeline of milestones that she will need to achieve in order to complete the budget. This will help her stay organized and on track.
Overall, creating an operational budget is a good starting point for Carol's master budget for "The Big Spoon." By carefully analyzing the company's expenses and considering changes in the market, she can create a budget that is both accurate and flexible. Additionally, creating a timeline of milestones will help her stay organized and on track.
To learn more about expenses here:
https://brainly.com/question/14697297#
#SPJ11
Which of the following is least likely to be the result of economic disruptive patterns caused by a prolonged period of government budget deficits?
A. high inflation
B. substantial inflows of foreign financial capital
C. increasing exchange rates
D. strains on a country's financial system
"Substantial inflows of foreign financial capital" is least likely to be the result of economic disruptive patterns caused by a prolonged period of government budget deficits. Option B is the correct answer.
Prolonged periods of government budget deficits may result in a rise in inflation, an increase in exchange rates, and strains on a country's financial system due to the high government borrowing. However, such situations are unlikely to attract substantial inflows of foreign financial capital because the investment risks become higher as the government's fiscal position deteriorates.
Thus, option B is the correct answer.
You can learn more about budget deficits at
https://brainly.com/question/26010226
#SPJ11
step 1: establish the need for marketing research a. this tells the researcher exactly how to obtain information necessary to allow the manager to choose between decision alternatives.
Step 1 tells the researcher exactly how to obtain information necessary to allow the manager to choose between decision alternatives.
Step 1: Establish the need for marketing research. Establishing the need for marketing research is the first step in the marketing research process.
The following are the sub-steps involved in the establishment of the need for marketing research:
Define the problem:The first step in establishing the need for marketing research is to define the problem, which means identifying the gap between what is expected and what is happening right now.
Identify the information needed:The next step is to identify the information that is required to address the research problem.
Determine the sources of data:The third step is to determine the sources of data that will be required to address the research problem.
Design research method:The fourth step is to design the research method that will be used to collect the data.
Step 1 tells the researcher exactly how to obtain information necessary to allow the manager to choose between decision alternatives.
Learn more about marketing research steps https://brainly.com/question/24906199
#SPJ11
You purchase a drone while on vacation in a country outside the U.S. The drone is registered in the foreign country where you purchased it. Upon returning home:
A) You have 14 days to register the drone in the U.S.
B) You must first de-register the drone in the foreign country and then register it in the U.S.
C) You can leave the drone registered in the foreign country but must register it in the U.S.
The correct answer is B) You must first de-register the drone in the foreign country and then register it in the U.S. According to the Federal Aviation Administration, any drone purchased in a foreign country must be de-registered from the foreign country and registered in the U.S. within 14 days of returning home. This is to ensure that the drone is compliant with the aviation laws and regulations in the U.S.
A drone is an unmanned aerial vehicle (UAV), also known as an unmanned aerial system (UAS), a remotely piloted aircraft system (RPAS), or a drone for short. It is a type of aircraft that does not have a human pilot aboard, instead using a remote control to fly or navigate. A drone's use varies for commercial, scientific, military, and recreational purposes.
For more info about the topic Drones registration check the below link:
https://brainly.com/question/15789398
#SPJ11
In the context of cash flow analysis, _____ are a useful measure as a means to evaluate performance when there is a separation between managers and owners.
In the context of cash flow analysis, Return on investment (ROI) is a useful measure as a means to evaluate performance when there is a separation between managers and owners.
ROI (Return on investment) is a financial metric that assesses the efficiency of an investment or compares the efficiency of several investments.
ROI can be used to compare the costs and benefits of any investment, including money, time, and resources.
ROI is a financial performance measure that calculates the percentage return on an investment relative to its cost. ROI takes into account both the gain from an investment and the cost of the investment.
It is a popular metric for evaluating performance in the context of cash flow analysis when there is a separation between managers and owners.
The formula for calculating ROI is simple:
ROI = Net Profit / Cost of Investment
This indicates that ROI is equal to the net profit of an investment divided by the cost of the investment. This ratio is normally expressed as a percentage or a ratio.
Learn more about Return on investment here:
https://brainly.com/question/11913993
#SPJ11
Which of the following could be a logical or realistic accounting period for a business that is creating financial statements? (Check all that apply.)Multiple select question.one-yearone-monthsix-monthfive-year
A logical or realistic accounting period for a business creating financial statements could be one-year, one-month, six-month, or five-year. A one-year accounting period is most common and is recommended for most businesses.
This allows for a full year of financial statements that accurately reflect the business’s financial performance. A one-month accounting period is used by some businesses, such as those that require up-to-date information on a regular basis. A six-month accounting period is typically used by businesses that have seasonal sales, as this allows them to better track their financial performance during their peak seasons.
Finally, a five-year accounting period is used by businesses that have long-term investments or contracts. This allows for a comprehensive view of the business’s financial performance over the long term.
Know more about Investments here:-
https://brainly.com/question/15353704#
#SPJ11
a prestigious investment bank designed a new security that pays a quarterly dividend of $2.50 in perpetuity. the first dividend occurs one quarter from today. what is the price of the security if the apr is 3.7 percent compounded quarterly?
If the APR is 3.7 percent compounded quarterly, the price of the security is $270.27.
The price of a perpetuity is the sum of an infinite geometric series, which can be calculated using the following formula:
P = D / r
Where:
P = price of the security
D = the periodic dividend payment
r = the periodic interest rate
In this case, the periodic dividend payment is $2.50 per quarter, and the periodic interest rate is 3.7% per year, compounded quarterly. To convert the annual interest rate to a quarterly rate, we divide by 4:
r = 3.7% / 4 = 0.925%
Substituting the given values into the formula for the price of a perpetuity:
P = $2.50 / 0.00925
P = $270.27
Therefore, the price of the security is $270.27.
Learn more about price of the security here:
https://brainly.com/question/31060477
#SPJ11
